Related
Hey guys and gals,
I am looking to purchase a Car Qi Charger. I have not yet found a thread for this, though there were options mentioned in the regular Qi Charger thread, but this one is specifically for the car.
I have found 2 which look promising but just want to know other peoples input. Plus want to know if they will hold with a case on the phone.
Itian: http://www.amazon.com/dp/B00M685JTG/
C1: http://www.amazon.com/dp/B00H1XU6A8/
Both of these look pretty good, have mixed reviews, but just want to know what you guys think would be best and if anyone actually used these in the past?
I know that there is also the AirDock, but I doubt it would hold the Note 4 all that well, so not bothering to include it.
I currently use this item in my car as a regular holder, so I wish there was one (other than the AirDock) which can utilize the ability to hold and charge the phone by mounting into the CD Slot of the car head unit: http://www.amazon.com/dp/B004G1L52Q/
Please add to this list if anyone has better solutions.
I've been agonizing over this choice myself, but I'm even worse off than you- I've gotten hooked on having a magnetic mount (currently using the Bracketron Si earth elements mount), and I REALLY like the S-View cover, so what I really want is a car dock that does Qi charging AND holds the phone magnetically, with strong enough magnets to hold through the S-View flap! Unfortunately, it seems that at this point there aren't ANY magnetic Qi docks (apart from the Airdock, and I'm right on the same page as you there), let alone one that would work through the S-View flap! So basically if I want Qi I'm stuck either sacrificing the magnetic holding feature and going with arms, or I'll have to build my own custom dock. Haven't quite decided which route I'll go yet, but man do I wish there was a decent magnetic Qi dock!
Anyway, as for Qi docks that DO exist now, in my research I've found a couple that seem to really stand out and come up time and again as the go-to's for Qi in the car. Here's the best options I've seen so far:
The iOttie: http://www.iottie.com/Product/Detai...for Google Nexus 5 and Qi Enabled Smartphones
Amazon's got this one for $55 also: http://www.amazon.com/iOttie-Wireless-Standard-Motorola-Smartphones/dp/B00IRHQZTI
Nokia CR-201: http://www.mobilefun.com/38310-nokia-qi-wireless-charging-nfc-car-holder-cr-201-Reviews.htm
bit more expensive, but has some nice features.
Then there's this:http://www.tylt.com/vu-car-wireless-charger/
Not available yet, but it looks like it may be a decent option.
I've read a lot of mixed reviews on the plethora of non-name brand Qi gear thats out there, some people say that they work just as well for cheaper prices and others say that they're total junk. I guess I'd say if you see one you really like then just make sure that you read reviews on it so you don't get stuck with something that doesn't work or worse.
As for a mount that uses the CD slot, I haven't seen any Qi docks that come with that option but many docks share similar or identical mounting solutions, so once you find a Qi dock that you like you could probably find a non-qi dock that mounts in the CD slot and then just replace the actual dock with the Qi one. Personally I don't think I'd trust the CD slot to hold up a phone this heavy, I'd be worried about damaging the CD player not to mention it'll be much less steady, but hey if that's what you like then good luck!
Thanks for the input
I will have to look into the Ottie one as it does look fairly decent. The Nokia one is way over priced and I cannot say I am a fan of it. The Tylt is nice, but I am sure it is going to be quite costly due to their original designs of their products.
The reason I want it as a CD mount is because I currently have one (minus the Qi of course) and it works just fine, hold the phone super good, without issues at all what so ever. Plus, no damage done to the head unit or CD Slot (not that I use CDs of course lol).
I just want something very low profile, but for it to do the job you know. The reason why I do not want anything mounted on the windshield is because I hate wires and I like for the phone to be close to me while I drive. I do not text and drive though! I plan to run the wire behind my head unit and bring out just enough to plug into the Qi holder. This will be a pain in the rear of course, but I am anal when it comes to wires lol. I have a radar, dash cam, and soon a Qi charger, all of which I want to make fairly invisible with regards to wires.
soul777toast said:
I've been agonizing over this choice myself, but I'm even worse off than you- I've gotten hooked on having a magnetic mount (currently using the Bracketron Si earth elements mount), and I REALLY like the S-View cover, so what I really want is a car dock that does Qi charging AND holds the phone magnetically, with strong enough magnets to hold through the S-View flap! Unfortunately, it seems that at this point there aren't ANY magnetic Qi docks (apart from the Airdock, and I'm right on the same page as you there), let alone one that would work through the S-View flap! So basically if I want Qi I'm stuck either sacrificing the magnetic holding feature and going with arms, or I'll have to build my own custom dock. Haven't quite decided which route I'll go yet, but man do I wish there was a decent magnetic Qi dock!
Anyway, as for Qi docks that DO exist now, in my research I've found a couple that seem to really stand out and come up time and again as the go-to's for Qi in the car. Here's the best options I've seen so far:
The iOttie: http://www.iottie.com/Product/Detai...for Google Nexus 5 and Qi Enabled Smartphones
Amazon's got this one for $55 also: http://www.amazon.com/iOttie-Wireless-Standard-Motorola-Smartphones/dp/B00IRHQZTI
Nokia CR-201: http://www.mobilefun.com/38310-nokia-qi-wireless-charging-nfc-car-holder-cr-201-Reviews.htm
bit more expensive, but has some nice features.
Then there's this:http://www.tylt.com/vu-car-wireless-charger/
Not available yet, but it looks like it may be a decent option.
I've read a lot of mixed reviews on the plethora of non-name brand Qi gear thats out there, some people say that they work just as well for cheaper prices and others say that they're total junk. I guess I'd say if you see one you really like then just make sure that you read reviews on it so you don't get stuck with something that doesn't work or worse.
As for a mount that uses the CD slot, I haven't seen any Qi docks that come with that option but many docks share similar or identical mounting solutions, so once you find a Qi dock that you like you could probably find a non-qi dock that mounts in the CD slot and then just replace the actual dock with the Qi one. Personally I don't think I'd trust the CD slot to hold up a phone this heavy, I'd be worried about damaging the CD player not to mention it'll be much less steady, but hey if that's what you like then good luck!
Click to expand...
Click to collapse
I found one on sale (non brand name though)
http://www.aliexpress.com/item/QI-W...a-Lumia-920-820-Free-shipping/2041086689.html
and another
http://www.aliexpress.com/item/New-...S3-S4-Note2-Nexus-Nokia-Lumia/1795791846.html
I use this one:
http://smile.amazon.com/gp/product/B00FC0NBI6/
I used it for my S3, and it does fit a Note 4 with the Ringke Fusion case on it with a little room to spare. I haven't used it for Wireless Charging on my Note 4 yet because I'm still waiting for my wireless receiver to arrive, but it has worked perfectly on my S3 for the last 6 months.
It doesn't go in a CD slot, but it does offer both the suction cup and the air vent hooks.
elite-fusion said:
I will have to look into the Ottie one as it does look fairly decent. The Nokia one is way over priced and I cannot say I am a fan of it. The Tylt is nice, but I am sure it is going to be quite costly due to their original designs of their products.
The reason I want it as a CD mount is because I currently have one (minus the Qi of course) and it works just fine, hold the phone super good, without issues at all what so ever. Plus, no damage done to the head unit or CD Slot (not that I use CDs of course lol)..
Click to expand...
Click to collapse
Keep in mind that none of the chargers that people listed here except for the Itian have the One Touch operation. Paradoxically that includes the iOttie charger (people who invented it). So to me they all seem ridiculously overpriced for the limited functionality they provide. I am using Itian, and so far pretty happy with it. If you really need some sort of specific mount (CD, Vent, or whatever), you may be able to take Itian head (it's detachable) and glue it to the mount that you like. I had to do that myself because by dash has rough texture and the only suction cup that would stick is iOttie gel cap. So I used a suction cup plus arm form a low end iOttie charger ($13.99 on sale) and Itian head ($27.99). Cheaper and more functional than name brands.
railshot said:
Keep in mind that none of the chargers that people listed here except for the Itian have the One Touch operation. Paradoxically that includes the iOttie charger (people who invented it). So to me they all seem ridiculously overpriced for the limited functionality they provide. I am using Itian, and so far pretty happy with it. If you really need some sort of specific mount (CD, Vent, or whatever), you may be able to take Itian head (it's detachable) and glue it to the mount that you like. I had to do that myself because by dash has rough texture and the only suction cup that would stick is iOttie gel cap. So I used a suction cup plus arm form a low end iOttie charger ($13.99 on sale) and Itian head ($27.99). Cheaper and more functional than name brands.
Click to expand...
Click to collapse
Thanks for the input
I actually ordered the C1 yesterday, but ordered it from AliExpress for $34 and should hopefully be here in about a week or so.
I will report back. I am wondering about purchasing the Itian though and seeing which one is actually better, but not sure yet.
I used AirDock with my LG G3. It should work with note4 also. Got nothing bad to say about that dock!
theairdock dot com
loonyone said:
I use this one:
http://smile.amazon.com/gp/product/B00FC0NBI6/
I used it for my S3, and it does fit a Note 4 with the Ringke Fusion case on it with a little room to spare. I haven't used it for Wireless Charging on my Note 4 yet because I'm still waiting for my wireless receiver to arrive, but it has worked perfectly on my S3 for the last 6 months.
It doesn't go in a CD slot, but it does offer both the suction cup and the air vent hooks.
Click to expand...
Click to collapse
Disregard my earlier suggestion. Now that I finally have a Qi Receiver sticker for my Note 4, I'm finding that this one doesn't charge because the receiver isn't centered in the phone. I did cut up my receiver and turn the coil as close to the center as possible (careful not to cut the actual wires!), but it still doesn't charge for more than 2 seconds before the charging indicator turns off on the phone.
I ordered this one as a replacement and it's working great:
http://smile.amazon.com/gp/product/B00F5XPCSC/
Caveat: I don't know if it would work with the receiver sticker still in it's original configuration... :/ If I had to guess, I'd say it would because I can slide my phone to either side a little bit and I don't lose connection.
I had it with my Note 3. With the Note 4, I upgraded the car charger to a QC 2.0 charger and my car charging need is solved. It charges way faster than the best Qi charger that I've tried.
elite-fusion said:
Hey guys and gals,
I am looking to purchase a Car Qi Charger. I have not yet found a thread for this, though there were options mentioned in the regular Qi Charger thread, but this one is specifically for the car.
I have found 2 which look promising but just want to know other peoples input. Plus want to know if they will hold with a case on the phone.
Itian: http://www.amazon.com/dp/B00M685JTG/
C1: http://www.amazon.com/dp/B00H1XU6A8/
Both of these look pretty good, have mixed reviews, but just want to know what you guys think would be best and if anyone actually used these in the past?
I know that there is also the AirDock, but I doubt it would hold the Note 4 all that well, so not bothering to include it.
I currently use this item in my car as a regular holder, so I wish there was one (other than the AirDock) which can utilize the ability to hold and charge the phone by mounting into the CD Slot of the car head unit: http://www.amazon.com/dp/B004G1L52Q/
Please add to this list if anyone has better solutions.
Click to expand...
Click to collapse
Have the air dock with the goose neck mount. It was garbage and then I saw that they have the magnetic stickers. I attach the magnetic sticker to the back of the case I have the tough armor case. Now it is absolutely amazing I can't imagine anything better anyone looking for charger
gingi999 said:
Have the air dock with the goose neck mount. It was garbage and then I saw that they have the magnetic stickers. I attach the magnetic sticker to the back of the case I have the tough armor case. Now it is absolutely amazing I can't imagine anything better anyone looking for charger
Click to expand...
Click to collapse
Can someone with the AirDock comment on the strength of the magnet? I've been pretty interested in it, but the problem for me is that I really like the S-View case, so the magnet in the AirDock would need to be strong enough to hold through the S-View flap. Maybe someone could test how well it holds with a piece of cardboard or something between the AirDock and the phone? I've totally gotten addicted to having a magnetic dock, but I also love my S-View and I want wireless charging! I mean cmon, can't I have everything???
soul777toast said:
Can someone with the AirDock comment on the strength of the magnet? I've been pretty interested in it, but the problem for me is that I really like the S-View case, so the magnet in the AirDock would need to be strong enough to hold through the S-View flap. Maybe someone could test how well it holds with a piece of cardboard or something between the AirDock and the phone? I've totally gotten addicted to having a magnetic dock, but I also love my S-View and I want wireless charging! I mean cmon, can't I have everything???
Click to expand...
Click to collapse
Just use these, its what I do and it works amazing
Right, I would assume I'd need to use the sticker but what I'm wondering is whether the AirDock will hold the phone with the S-View cover flipped around to the back. Basically the sticker would be on the back of the phone, then the S-View cover would be between the sticker and the AirDock. Are the magnets in the AirDock strong enough to hold the phone even with the cover between them and the sticker?
soul777toast said:
Can someone with the AirDock comment on the strength of the magnet? I've been pretty interested in it, but the problem for me is that I really like the S-View case, so the magnet in the AirDock would need to be strong enough to hold through the S-View flap. Maybe someone could test how well it holds with a piece of cardboard or something between the AirDock and the phone? I've totally gotten addicted to having a magnetic dock, but I also love my S-View and I want wireless charging! I mean cmon, can't I have everything???
Click to expand...
Click to collapse
The nexus 5 has 4 metal discs in it specifically to make magnetic docks easy and allow for some self aligning.
The airdock with the nexus 5 works reasonable well. Not perfect, I do have to realign the phone more than once per day and end up grabbing or holding if if there's a big dip/bump/whatever.
However even with a thin case the n5 is unusable with the air dock. What's worse is that the airdock + note 4 is worse than the airdock + n5. I'm guessing the note 4 doesn't have the 4 discs.
I have an airdock and it works great with the Note 4.
i use an itian charger and it works great with double sided scotch tape for outdoor mounting. sticks vertically to the dash and holds the note 4 with two prongs.
While shopping for cars, I found out the camry and Avalon can come with wireless charging. I ended up with an Avalon Hybrid with tech pkg.
I'm not happy with this one - lost allways the connection - looking now one with three coils like my Itian desk charger, this one works perfect....
loonyone said:
I use this one:
http://smile.amazon.com/gp/product/B00FC0NBI6/
I used it for my S3, and it does fit a Note 4 with the Ringke Fusion case on it with a little room to spare. I haven't used it for Wireless Charging on my Note 4 yet because I'm still waiting for my wireless receiver to arrive, but it has worked perfectly on my S3 for the last 6 months.
It doesn't go in a CD slot, but it does offer both the suction cup and the air vent hooks.
Click to expand...
Click to collapse
I like the iOttie...
has anyone here found a car mount that has either a magnetic or sticky pad qi charger? looking for a sleek install in my car. or do i have no other choice to diy it?
I haven't tried it yet but this one has been the only one I've been able to find so far. I am currently using this Spigen magnetic mount and was able to position the metal plate at the very bottom of the phone horizontally where it will still hold the phone securely but not interfere with my Samsung fast wireless dock at home, but it would be nice to have wireless charging in the vehicle as well.
I've been considering the air dock 2.0 but it doesn't have quick charge. I read somewhere that the magnets can interfere with the spen somehow. I'll probably end up picking up a choetech fast charger and rigging it somehow.
I'm really looking for this as well..
Couldn't find a single magnetic QI car charger which supports QC 2.0 yet.
I have used the magnetic mount mentioned above from Amazon. The really cool thing about it is you do not need any extra metal or magnets for the Note 7 to stick to it (previously I had always mounted magnets under the back cover or inside a skin to hold the phone) However, what I do is have the bottom of the phone rest on top of my car stereo to keep it in place. This adds more support for the phone in addition to the magnetic mount and seems to really help keep the phone attached on bumpy roads and fast turns. Lining up the phone to charge correctly can be a bit of a challenge also. I had been making custom magnetic charging car mounts for myself with my other phones (started with the palm touchstone a few years ago) but his is so far the best stock experience I have had for a magnetic wireless charging car mount.
I have ordered a proclip for my vehicle. Waiting on that and still searching for a Qi charger thatll look and fit nice in my center console. Still debating if I wanna do magnets or sticky tape. I too have the magnetic mount. But it doesn't seem to be strong enough with a case and the metal backing interferes with the Qi charger in my room.
Heya,
So I have ordered a Promate MagMount to have the phone attached securely on the front, I went with a magnetic holder as they seem to be much better than traditional phone holders for cars (as the clips on the sides sometimes scratch and such the sides).
My question is, does anybody have experience with using a metallic disc on their phone/case and used it with a wireless charger?
I was first thinking of attaching the metallic disc on the back of the phone itself, then thought about keeping the metallic disc between the phone and the case (without attachment) and then finally thought of just sticking it on the clear cover case itself.
As I charge the phone wirelessly with the case attached, will the metal interfere severely with the wireless charging and cause some sort of hazard or damage to the phone? Or can it work without any issues?
I use the Spigen magnetic vent mount and have the piece of metal in between my phone and the Spigen Ultra Soft case. I cannot use the wireless charger as the piece of metal interferes with the charging. If you put the piece of metal on the case and take your case off when you charge it will work fine.
By the way, what is the big advantage to wireless charging? I've used it for a few days and it doesn't seem to have any advantages. I can't even use the phone while it's charging. If you plug it in you can at least use the phone while it's charging.
Sent from my SM-G955U using Tapatalk
skinnytoo2 said:
I use the Spigen magnetic vent mount and have the piece of metal in between my phone and the Spigen Ultra Soft case. I cannot use the wireless charger as the piece of metal interferes with the charging. If you put the piece of metal on the case and take your case off when you charge it will work fine.
By the way, what is the big advantage to wireless charging? I've used it for a few days and it doesn't seem to have any advantages. I can't even use the phone while it's charging. If you plug it in you can at least use the phone while it's charging.
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
Nothing super special except that it just looks cool and you can immediately pick up the phone and go, without the need to disconnect any cables.
Well, taking off the case again and again would be hectic for wireless charging...Damn would have to look for something or place the metallic sheet above the battery area and such...
Sent from my SM-G955F using Tapatalk
Also don't forget about electromagnetic field which is used by wireless charger
Even if it will charge with this metal plate, it will heat up metal and battery.
Be careful when you use wireless charger
I enjoy my magnetic holder. It's in a perfect location and the phone attaches nicely to it. I can see it perfectly for navigation. I'll gladly give up wireless charging for it.
Sent from my SM-G955U using Tapatalk
Wireless charging is no advantage for me either. It takes no time to plug/unplug. Mag mount is so worth it.
Sent from my SM-G955U using Tapatalk
I have an Airdock 2.0 and while it does work, it just not work to charge at high speed. Holds the phone pretty well in my case.
You can have wireless charging and use a magnetic mount. You'll need to place the metal plate near the bottom of the device. I have mine there and have no issues with wirelessly charging.
y2k1ltd said:
You can have wireless charging and use a magnetic mount. You'll need to place the metal plate near the bottom of the device. I have mine there and have no issues with wirelessly charging.
Click to expand...
Click to collapse
I will try that.. thank you! I have a small round plate and a larger rectangle one.. use the small round one right?
Sent from my SM-G955U using Tapatalk
Both work fine, the rectangle one needs to be long side down for the wireless charging to work.
y2k1ltd said:
You can have wireless charging and use a magnetic mount. You'll need to place the metal plate near the bottom of the device. I have mine there and have no issues with wirelessly charging.
Click to expand...
Click to collapse
I've tried that in the past. Unfortunately, this thing called gravity flips the phone upside down.
Sent from my SM-G955U using Tapatalk
skinnytoo2 said:
I've tried that in the past. Unfortunately, this thing called gravity flips the phone upside down.
Click to expand...
Click to collapse
Hmm, not with mine.
y2k1ltd said:
Hmm, not with mine.
Click to expand...
Click to collapse
Do you have the spigen?
Sent from my SM-G955U using Tapatalk
skinnytoo2 said:
Do you have the spigen?
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
No, I'm using the Maxboost mount. Maxboost 2 pack
Hey guys, I had the same issues too, so I had to take off the case every time I wanted to get my phone wireless-charged until I happened to see a blog: No One Will Tell You These Tips on Selecting Magnetic Phone Mount (But You Can Learn Here), where shows how someone solved the metal plate problems by embedding it in a case, so the metal plate won't interfere with wireless charging anymore whilst you keep the metal plate working as always. which truly impressed me a lot, to be honest, this is the solution what I've been looking for. Hope this blog is useful for you too.
MagCase
Few months I got a Magcase from my brother for my birthday, which works well on my phone to date. as my brother told me that this case has the metallic plates embedded in so that the case can work both with the magnetic car mount and with a wireless charger without affecting the ability to charge.(not sure about it but at least this case saved me up from looking for a stuff combining wireless charging and magnetic car mount), loviiiing it
Went through this myself with a Galaxy S8 I had just for one month. Personally, I decided to opt for another mount, since I use wireless charging a lot, if the phone I have supports this. My solution was to pick a regular air vent mount and kept the phone with a Spigen case on it. No scratches at all and it keeps the phone very steady, while I can still enjoy wireless charging.
Metal heats up the phone during wireless charging...so I take the case off while wireless charging...however my s8+ motherboard conned off not sure because of magnetic car holder...any inputs if magnetic car holder can damage s8+ which also has wireless charging ability...
-Trinath
Hi All,
I ordered my Note 9 512gb a little while back and have a few more weeks to wait. While I'm waiting I'm getting all the stuff I think I want to have with it. One of those things is a wireless charging car dock. There are too many out there to really know which is best so I thought I would ask the people that already have the note9 and possibly are already using a wireless car dock. Thanks!
I'm interested too. I'm searching for one usable with the clear view cover. Magnetic one would be great but I'm scared by the metallic ring and Qi interferences. I'm thinking of building my own based on the magnet already in the cover...
Nobody has a pony in this race?
I went with Choetech one for my other car because it has a USB C inout for power. Works good, about the same as the iottie one touch except not as convenient.
Sent from my SM-N960U using Tapatalk
gottria said:
I went with Choetech one for my other car because it has a USB C inout for power. Works good, about the same as the iottie one touch except not as convenient.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Thanks Gottria, I'll look into it :good:
I like the Choetech charger but 2 things bug me. The arms are slightly curved inwards toward the end and when the phone sits in the cradle all the way back the tips of the arms slightly block the screen. And forget about accessing the side edge function. 2nd is the mount, it doesn't use the 17mm ball and it's reversed compared to other mounts. The socket needs to be on the back of the device instead of the ball.
Sent from my SM-N960U using Tapatalk
gottria said:
I like the Choetech charger but 2 things bug me. The arms are slightly curved inwards toward the end and when the phone sits in the craddle all the way back the tips of the arms slightly block the screen. And forget about accessing the side edge function. 2nd is the mount, it doesn't use the 17mm ball and it's reversed compared to other mounts. The socked needs to be on the back of the device instead of the ball.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Thanks gottria. I use a panavise mount in my C63 and have a 17mm ball to hook the dock onto. This would've completely screwed up my setup :highfive:
I've just bought the choetech fast wireless charger mount. I have a Vauxhall vivaro and theres no good way to mount it so its on the windscreen towards the top with a USB trailing down to the quick charge 12v plug I use. I can see it being a pain but doesn't really block my view. I prefer air vent mounts had a baseus wireless charger but didn't even charge the phone. Compared to the choetech its much more cheapy and flimsy the choetech feels solid. Which is good but if anyone can advice a way I Can get a air vent mount to hold it to that then would prefer it.
My main worry about the choetech is with cold freezing weather coming in and frozen windscreens how well will it actually hold up as dont want my £1000 phone dropping and smashing. :fingers-crossed:
Idrogn said:
I'm interested too. I'm searching for one usable with the clear view cover. Magnetic one would be great but I'm scared by the metallic ring and Qi interferences. I'm thinking of building my own based on the magnet already in the cover...
Click to expand...
Click to collapse
If you find a solution, let me know. I too am struggling to find one that works with the clear view cover
I have to say that when it comes to car mounts period, the folks at EXOGEAR are the best from my experience over the years. I've used their tablet and smartphone mounts. These mofos stick to practically any surface. Couple that with the way the phone snaps in and out of the mounts? It's so quick and easy.
But now I'm learning these guys make wireless chargers for their mounts. It says it goes "up to" 9v so I'm curious how fast it actually charges the N9.
Since it's EXOGEAR and I swear by their suction cup performance I'm going to buy it soon as it comes available and I'll check back later and let y'all know how it worked out. I honestly never felt the need to have a wireless charger in my car because I typically have plenty of battery life by the time I get home but this wireless charger peaked my interest.
https://exogear.com/product/exomount-qi/
I purchased the iOttie and loved it enough to purchase a second one for my wifes car. I havent found a single suction cup that would work with my leather in the car so I purchased a panavise mount and 17mm ball adapter to mount it. But while waiting for those to arrive I tested the suction cup and it holds... amazingly. The mount hasn't shifted in the slightest and I have launched the car from a dead stop a few times trying to get it to shake lose. I can feel my body violently being forced back into the seat but the mount doesn't look fazed. First time I can actual praise a suction cup mounting system.
Also I thought I should add that "Fast Charging" is displayed when the phone is docked.
I'm using the Baseus Qi Wireless Magnetic Fast Charger and it's pretty good. The only downside is if you have stiff car suspension (like in sports car) and get into a big bump, the phone can lose grip and fall.
https://m.aliexpress.com/item/32836...l&spm=2114.12010612.8148356.49.9226935c3ACvcY
Since my car already has a navigation screen I don't need the phone up in the vent area. Besides I didn't like any of the in vent holders. The magnetic phone holders out there I don't like since if i hit a bump or pothole the phone will fall due to its weight. There is a coin slot holder in my care but the wireless ones usually have a base that won't fit in that holder. But I then found a wood wireless charger a while back that had a metal base which is removable. I placed it in the coin holder and it charges my then Note 8, now Note 9 even with a case. Granted it is not a fast charge type of wireless charger but it does charge my phones quickly enough on the half hour of driving from work to home. So it does the job enough for me, looks great and I don't have to worry about the phone falling off a magnet or blocking the vent.
Got this charger for £12.99 on Amazon:
mod edit - link removed
Feels cheap and looks cheap but it works and does the job well enough. It's foldable too, so you can use it either horizontal or vertical.
Worth it, if you need to buy a cheap one to leave at the office.
Would be great if wireless charger can work even with a metal piece on the back of casing for magnetic car phone holder
speed8081 said:
Would be great if wireless charger can work even with a metal piece on the back of casing for magnetic car phone holder
Click to expand...
Click to collapse
There are magnetic holders that claim to work without blocking the wireless charger. They use a metal piece shaped like an upside down "U" instead of a square one. Given all the warnings against mixing credit cards and metal on cases and what not with wireless charging, I'd be weary of trying it out myself on my own phone, but they do exist. Just search for wireless charging compatible magnetic mount, I'm sure some will turn out.
Could be that I'm missing something (perhaps even a crucial factor), but why couldn't you use a wireless charger at the same time you have a metal plate in your case? It can't be harmful to the phone right?
I have a strong enough carkit so I can use a relatively small circular piece of metal in my slim fit case for the Note 9, works a charm. I've tested the location in the case, so I can use this in my car and still be able to put it down on a wireless charger so it charges without a problem. Okay, so when I put my phone on the charger pad a bit to far down or up, it doesn't charge, but that's just a matter of trying which position is best and this will become a non-issue the more you use it (since you know exactly how to put it on the charging pad).
Please enlighten me whether or not it could be harmful in any way to the phone because I don't want to risk a $1250 phone for the convenience of charging wirelessly. But I haven't ran into trouble this way just yet. Been doing this also with my Galaxy S8 for over a year btw, it still works like new.
Btw, @OP, can you share a link to the charger?
bramgg said:
Could be that I'm missing something (perhaps even a crucial factor), but why couldn't you use a wireless charger at the same time you have a metal plate in your case? It can't be harmful to the phone right?
I have a strong enough carkit so I can use a relatively small circular piece of metal in my slim fit case for the Note 9, works a charm. I've tested the location in the case, so I can use this in my car and still be able to put it down on a wireless charger so it charges without a problem. Okay, so when I put my phone on the charger pad a bit to far down or up, it doesn't charge, but that's just a matter of trying which position is best and this will become a non-issue the more you use it (since you know exactly how to put it on the charging pad).
Please enlighten me whether or not it could be harmful in any way to the phone because I don't want to risk a $1250 phone for the convenience of charging wirelessly. But I haven't ran into trouble this way just yet. Been doing this also with my Galaxy S8 for over a year btw, it still works like new.
Btw, @OP, can you share a link to the charger?
Click to expand...
Click to collapse
I put a link to charger on the video description.
I just bought this one: https://www.amazon.com/dp/B07C5KCQQ4/
Fast charges a little slower than directly plugging the Samsung charger into the phone (as expected).
The hinge is a tight friction fit, so the angle is adjusted wherever you like.