Related
Good day everyone, this is a guide on how to enable Xposed on EMUI 3.1 (Working tested by me using the deodex method) and EMUI 4.0 (Working tested by me also and confirmed working by @Blackball,). - (Update using the deodex method 10-4-2016)
First of all the original guide for making this work on Huawei roms http://forum.xda-developers.com/honor-6/general/guide-workaround-running-xposed-t3338765. Ty @mfbcool for your guide and help. Please follow his instructions to the letter for making it work on our device.
- ([15-4-2016] New Instructions on the original thread no need to deodex the rom files, a working xposed zip has been developed for Huawei devices just flash it in twrp and do the build.prop modifications before you flash the zip for your version of rom. Already tested by me)
So my role in this is to highlight all the tips needed for making it work on our device, and the issues i faced when doing it. ([15-4-2016] The original thread is self explanatory, all of the tips here are already mentioned there this thread was created when we needed to deodex the rom files. So forgive me if i am not adding much.)
Notes
- I think a lot of the members were installing the wrong xposed files for our device we need the ARM-64 SoC files for our device because it's using the Kirin 930.
The Tips:
Lollipop:
1. The xposed files needed for your device are under the heading of: on Lollipop 5.0.x is: Xposed for EMUI 3.1 Android 5.0. (If you are on Lollipop 5.1.1 is: Xposed for EMUI 3.1 Android 5.1.1, if Marshmallow: Xposed for EMUI 4.0 Android 6.0)
http://forum.xda-developers.com/android/general/guide-workaround-running-xposed-t3338765
2. Make sure that after you install the xposed apk , you go to "build.prop" in /system using any file explorer with root and edit the line "ro.config.hwtheme=1" to "ro.config.hwtheme=0" and then save the file with the defualt permissions or you will get a bootloop. why editing the build.prop is important because without changing this the framework will not be active, you will get a red message saying framework not active. The only way to activate it is by editing this line or in the xposed app go to Settings if you enable "disabled resources hooks" doing that and then restarting will activate the framework but whatever module that uses resources will not work. So the only way working without affecting the modules is editing the build.prop file.
Marshmallow:
1. Make sure to add these lines ro.config.hwtheme=0 and ro.config.hw_theme=0 in build.prop in order for xposed to work and make sure to save the file with the defualt permissions or you will get a bootloop.
If you follow the original guide exactly and the tips you should have no issues making Xposed work.
P.S: By the way first boot may take a while (15+ mins), So don't be afraid.
Special thanks again to @mfbcool for his guide & help, and @pudup for directing me to the guide.
Sent from my HUAWEI GRA-UL00 using XDA-Developers mobile app
Thanks for the guide.
Its working for Marshmallow too. I have made a B317 deodexed Stock Rom zip file for TWRP and two test user installed Xposed.
Look here :
https://www.androidfilehost.com/?fid=24459283995307610
and here
http://www.android-hilfe.de/index.php?posts/9681033
Blackball said:
Its working for Marshmallow too. I have made a B317 deodexed Stock Rom zip file for TWRP and two test user installed Xposed.
Look here :
https://www.androidfilehost.com/?fid=24459283995307610
and here
http://www.android-hilfe.de/index.php?posts/9681033
Click to expand...
Click to collapse
Cool, are you facing any issues with it ?. So far on Lollipop no issues what so ever. By the way added your confirmation to the post if you don't mind.
I didnt tried it because im building at the moment a new version of my lollipop rom. The last version have still working xposed framework
Here a Screenshot from a test user.
working on p8lite so?
linus2014 said:
working on p8lite so?
Click to expand...
Click to collapse
Yes it's working on Huawei P8 lite too. Others have reported it working in the link of the original thread i posted. check it out.
Rashad83 said:
Yes it's working on Huawei P8 lite too. Others have reported it working in the link of the original thread i posted. check it out.
Click to expand...
Click to collapse
http://www.android-hilfe.de/thema/marshmallow-custom-rom-test-thread.762588/#post-9681033 this you say?
linus2014 said:
http://www.android-hilfe.de/thema/marshmallow-custom-rom-test-thread.762588/#post-9681033 this you say?
Click to expand...
Click to collapse
Nope, this http://forum.xda-developers.com/showpost.php?p=66036139&postcount=77
Rashad83 said:
Nope, this http://forum.xda-developers.com/showpost.php?p=66036139&postcount=77
Click to expand...
Click to collapse
thanks
Someone tried it with P8 Marshmallow? any bugs? thanks
00471 said:
Someone tried it with P8 Marshmallow? any bugs? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=66236747&postcount=19
I cant install xposed. When i install it, after reboot i get black screen with only one button of the navigation bar (i can access the shutdown menu from lock key, and i can access and the notification pannel, but nothing more). This is solved when i install the uninstall file.
My phone is already rooted. I firstly installed apk, and then installed xposed via twrp. I've tried to wipe the Dalvik but it doesnt solved.
My p8 is gra-L09, lollipop. Used this files: XposedInstaller_3.0_alpha4.apk, xposed-v80-sdk21-arm64.zip, xposed-uninstaller-20150831-arm64.zip.
What AM i doing wrong?
blocnt said:
I cant install xposed. When i install it, after reboot i get black screen with only one button of the navigation bar (i can access the shutdown menu from lock key, and i can access and the notification pannel, but nothing more). This is solved when i install the uninstall file.
My phone is already rooted. I firstly installed apk, and then installed xposed via twrp. I've tried to wipe the Dalvik but it doesnt solved.
My p8 is gra-L09, lollipop. Used this files: XposedInstaller_3.0_alpha4.apk, xposed-v80-sdk21-arm64.zip, xposed-uninstaller-20150831-arm64.zip.
What AM i doing wrong?
Click to expand...
Click to collapse
Did you deodex the rom? you have to deodex in order for xposed to work for Huawei devices, which version of Lollipop are you using?.
I flashed today the C636B320 Marshmallow firmware, and then i deodexed the rom per instructions to make xposed work on Marshmallow.
First attempt i failed because i didn't wait enough, you see the screen will get stuck on Huawei boot animation without any sign that anything is happening(no app update notification card like in Lollipop) for like a 20+ mins. Then voilà the phone booted normally. Also exposed is working fine no issues, make sure to flash xposed-v80-sdk23-arm64.zip instead of the latest one v81 which doesn't seem to work for me.
Rashad83 said:
Did you deodex the rom? you have to deodex in order for xposed to work for Huawei devices, which version of Lollipop are you using?.
Click to expand...
Click to collapse
I realized that, that i was missing the other tutorial and solved it. Thanks anyway
So I've been getting lots of different questions about how to get this and that on android 7.0 nougat so to make it easier for everyone to find ill create this thread.
1. TWRP
Is twrp available for N? If so where can I find it?
http://forum.xda-developers.com/p9/how-to/twrp-3-0-2-0-n-t3506947
2. ROOT
Oh cool now I have twrp. So how can I root?
Download phh r275 version and flash
Download and install Material phh apk: Release post
Now you should be good to go. If any issues feel free to ask here or in phh official thread.
3. BUSYBOX
User friendly zip flash this and the below steps isn't needed!
Flashable zip (1.25.1) : https://mega.nz/#!zlRm3S4B!9rAtfi0wI8oFu6xjJITgF0dRwV21UPsxvZQZzMo6VXk
This one is a bit tricky. If you run root. But
Download jrummy's busybox on Gplay.
Select installation folder to /system/xbin or if u don't want to touch system folder use /sbin if available. U can replace jrummy''s busybox with stericsson version if you like it better. But you must have installed jrummys version first if you're booted into android. Else stericsson busybox might have issues installing. Or u can use zips which contains busybox Google busybox flashable.
4. VIPER
More user friendly if using this zip the below steps should only need se Linux mode changer!
Flashable zip: https://mega.nz/#!f8wlzIrB!vVCAv-xqWB8lOrcQTgIyFL0WS7MFsE9iFb08E1YKV2Y
Is quite a mess to get working. You need se Linux mode set to permissive. Flash guitarheroes version of v4a (2.5.0.5) once flashed you need to replace the audio effects in /vendor/etc/audio_effects else you'll get I/O driver installation failed. Copy the .so files to /system/lib and /system/lib64 and set correct permission. If you have wrong busybox message. Try different versions of busybox but I use latest from stericsson and it works great. Hope u get it working.
Oh and don't forget to allow sd storage access or you'll get driver I/O error as well. And se Linux changed to permissive use se Linux mode changer for it. It works great with phh!
5. MAGISK
As it seems to be now. Magisk won't work due to loop issues on boot. And mount seems to have losetup fail 1 on mounting a .img while booted.
6. Xposed
Not yet available. Be patient rovo needs time we can wait for him
7. comes soon.
More stuff.
Sent from my FRD-L09 using Tapatalk
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
paratox said:
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
Click to expand...
Click to collapse
It doesn't matter if it's aosp. Since it is for v4a it will work. As long as the audio effects works it doesn't matter.
Also I just finished my hopefully new nougat viper4android zip (i made my own for M with material designed version for my s5 neo) which worked fine until now.
Now it extract all files to its locations even to /vendor partition which all zips I used previously never had. I'll also update busybox zip which previous available is 1.24.2 which I'll bump up to 1.25.1.
I'll also going to upload my stuff to android file host. But that will be later
New files can be found https://mega.nz/#F!HlpzlaZL!wGNoJinVPZL0YiBcdbLlKA
Tapatalk is messing with the link
Sent from my FRD-L09 using Tapatalk
Updated op with latest busybox by stericsson. More user friendly now
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
Updated op with latest busybox by stericsson. More user friendly now
Click to expand...
Click to collapse
Nice job mate!
dodgedroid said:
Nice job mate!
Click to expand...
Click to collapse
Easy to do when you got a zip for it just update the busybox executable and replace old one
Sent from my FRD-L09 using Tapatalk
Installation of ARISE
paratox said:
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
Click to expand...
Click to collapse
How did you installed ARISE in Nougat?
I've been trying all day and I'll always end with an I/O or Busybox error. I tried a lot of things, like changing /vendor/etc/audio_effect.conf to audio_effect.conf.bak or installing Busybox into system/bin, but none of them seems to work for me.
I'm on B361 btw. And sorry for answering an old post
LastStandingDroid said:
Also I just finished my hopefully new nougat viper4android zip (i made my own for M with material designed version for my s5 neo) which worked fine until now.
Now it extract all files to its locations even to /vendor partition which all zips I used previously never had...
New files can be found https://mega.nz/#F!HlpzlaZL!wGNoJinVPZL0YiBcdbLlKA
Click to expand...
Click to collapse
Do you know, is your Viper4Android installer compatible with the following rooting/Busybox configuration:
- L09 c432/b378
- TWRP 3.1.0-0
- SuperSU-v2.79-201612051815-EMUI5.0.zip
- Rummy"s BusyBox (installed to /system/xbin)
as described by @hakaz and @Atarii in the post #102 and follow-ups:
https://forum.xda-developers.com/showpost.php?p=71588837&postcount=102
Also, should SELinux really be switched to Permissive mode for V4A to work on P9 with Nougat?
Thanks
zgfg said:
Do you know, is your Viper4Android installer compatible with the following rooting/Busybox configuration:
- L09 c432/b378
- TWRP 3.1.0-0
- SuperSU-v2.79-201612051815-EMUI5.0.zip
- Rummy"s BusyBox (installed to /system/xbin)
as described by @hakaz and @Atarii in the post #102 and follow-ups:
https://forum.xda-developers.com/showpost.php?p=71588837&postcount=102
Also, should SELinux really be switched to Permissive mode for V4A to work on P9 with Nougat?
Thanks
Click to expand...
Click to collapse
Yes it should be compatible and yes u need to switch to permissive mode else it'll be asking you to install over again, or simply not start to work
Sent from my CUBOT_MANITO using Tapatalk
LastStandingDroid said:
Yes it should be compatible and yes u need to switch to permissive mode else it'll be asking you to install over again, or simply not start to work
Click to expand...
Click to collapse
Yes, thanks, I have flashed your Viper.zip through TWRP and installed vViPERFX_v2.5.0.5.apk
I have also installed SELinuxModeChanger and set SELinux mode to stay Permissive over rebooting
Viper4Android works fine - thanks
LastStandingDroid said:
5. MAGISK
As it seems to be now. Magisk won't work due to loop issues on boot. And mount seems to have losetup fail 1 on mounting a .img while booted.
Click to expand...
Click to collapse
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
simo255 said:
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
Click to expand...
Click to collapse
Having Magisk, can you now also install Xposed?
PS: Please provide links to your resources and threads.
Btw, you have P9 Lite - does the method for Magisk apply also to (regular) P9 (single SIM)?
zgfg said:
Having Magisk, can you now also install Xposed?
PS: Please provide links to your resources and threads.
Btw, you have P9 Lite - does the method for Magisk apply also to (regular) P9 (single SIM)?
Click to expand...
Click to collapse
it workes because we have a modded boot.img created by @HassanMirza01, ask him what he did so as to he will do the same for p9 boot.img(or anyone else)
install selinux and set it to permissive, after that install magisk app via playstore and click on autoinstall
no xposed isnt working because there is no xposed for Nougat.
simo255 said:
it workes because we have a modded boot.img created by @HassanMirza01, ask him what he did so as to he will do the same for p9 boot.img(or anyone else)
install selinux and set it to permissive, after that install magisk app via playstore and click on autoinstall
no xposed isnt working because there is no xposed for Nougat.
Click to expand...
Click to collapse
Can you post the link to install his kernel?
Danymat said:
Can you post the link to install his kernel?
Click to expand...
Click to collapse
it won't work because it's a boot.img of p9 lite not for p9
simo255 said:
it won't work because it's a boot.img of p9 lite not for p9
Click to expand...
Click to collapse
So for p9 we don't have any solutions to install magisk?
Danymat said:
So for p9 we don't have any solutions to install magisk?
Click to expand...
Click to collapse
try to install the pre rooted boot.img (phh one) via this link https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
and follow the steps that i wrote above
simo255 said:
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
Click to expand...
Click to collapse
Is this using a Magisk.img in /data folder?
As said magisk can be made working since we had supersu working by chain I still doubt it uses a loop
Sent from my CUBOT_MANITO using Tapatalk
LastStandingDroid said:
Is this using a Magisk.img in /data folder?
As said magisk can be made working since we had supersu working by chain I still doubt it uses a loop
Click to expand...
Click to collapse
no there is no magisk.img folder, but there is a magisk folder which include those files (look at the screenshot
simo255 said:
no there is no magisk.img folder, but there is a magisk folder which include those files (look at the screenshot
Click to expand...
Click to collapse
Yes this is how Magisk is being made working
Sent from my CUBOT_MANITO using Tapatalk
Hey guys,
I'm into the Android from the very beginning and I would love to get rid of a problem which is driving me crazy for some time
I was trying to flash the Viper driver to get the great sound quality again. I'm now on the latest nougat.
Already unlocked the bootloader, rooted it and flashed the TWRP. Saw an thread about how to install it properly on the Honor8 and I did everything correct in my opinion.
I have the 1.26.2-meefik busybox now installed in system/xbin path (which seems to be working correctly overall) and otherwise everything seems working good except that when I try to open the Viper it says that I don't have root OR that i have to install the driver, and after pressing yes my phone just reboots and does the very same thing as previously.
Am I missing something?
Feel free to ask something more if you need.
I had this same situation, just kept installing the driver, reboot, repeat, making no progress... I finally got mine to work thank goodness! Are you remembering to use a root file Explorer and go to /vendor/etc and rename the file named audio_effects.config to audio_effects.config.bak after flashing but before installing V4A? That was my main problem. And you have to be sure to do it on a clean setup, so if you've already installed V4A you need to clean out and start again. Also u need a kernel auditor to set selinux to permissive upon boot. These two steps are key...
Sent from my HUAWEI FRD-L04 using XDA Labs
Have same problem but this fix BigBrad75 gave didn't work.
Isn't that what I suggested? Not being a smarta**, but seriously wondering if I have got a step messed up or backwards or something...? Cause it gave me tons of trouble till I finally got lucky and it actually took
Sent from my HUAWEI FRD-L04 using XDA Labs
Rommco05 said:
I got same problem, solutions for my was:
1. install BusyBox by Meefik ( Google play)
2. install Kernel Adiutor ( https://github.com/yoinx/kernel_adiutor/raw/master/download/app/app-release.apk ) ( Kernel Adiutor from Google play dont work)
3. opem BusyBox tap Install
4. open Kernel Adiutor and go to Misc Controls, change Current SELinux Status: Permissive (after reboot SELinux stay premissive :good
5. flash Viper4 via TWRP
6. go to folder: root/vendor/etc and rename file from audio_effects.conf to audio_effects.conf.bak
7. open Viper4
8. Install driver (thats can take 1-3 min)
9. reboot - done
Click to expand...
Click to collapse
Hi Rommco05,
there are different versions of V4A floating around. Which Version of Viper4Android did you use? Download from where?
Greets....
Rommco05 said:
Hi, Honor 8/Theme,Apps,Modes/https://forum.xda-developers.com/honor-8/themes/viper4android-2-5-0-5-installation-t3468389
Click to expand...
Click to collapse
Thanks, worked for me just as you described. I'm on L09C432B389 BTW, if anybody is interested...
Thanks
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
i had the same but then i tried to use the other viper release from magisk and it worked. there is this one called hifi and fx
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
dgunn said:
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
Click to expand...
Click to collapse
that works for like 10 mins and then it gets killed
byReqz said:
that works for like 10 mins and then it gets killed
Click to expand...
Click to collapse
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
dgunn said:
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
Click to expand...
Click to collapse
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
byReqz said:
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
Click to expand...
Click to collapse
I was unaware that you were using the magisk module. I could not get that one to work either
dgunn said:
I was unaware that you were using the magisk module. I could not get that one to work either
Click to expand...
Click to collapse
the normal one doesnt work with viper doewsnt it?
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
TheNetwork said:
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
Click to expand...
Click to collapse
it only works for a few mins that way
I'm using the Android p beta and i don't have the problems with viper as i did with oxygen os 5. it's always processing for my headphones, either plugged in or Bluetooth. the only exception is sometimes after receiving a call while listening to music, after the call is over and my music resumes, viper is no longer processing. not every time though. i used the latest magisk and the viper module in the screenshot.
i also didn't make any changes to conf files, just installed through magisk download. rebooted, opened viper fx, gave it storage permissions and turned it on.
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
TuxRuffian said:
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
Click to expand...
Click to collapse
as i said, idk why but its working now.and im on material now
byReqz said:
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
Click to expand...
Click to collapse
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
reaper000 said:
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
Click to expand...
Click to collapse
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
byReqz said:
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
Click to expand...
Click to collapse
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
reaper000 said:
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
Click to expand...
Click to collapse
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
byReqz said:
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
Click to expand...
Click to collapse
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
reaper000 said:
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
Click to expand...
Click to collapse
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
byReqz said:
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
Click to expand...
Click to collapse
And you replaced the audio_effects.conf file in /system/vendor/etc with the one from the downloaded zip?
(Sorry to belabor the point, but it's not clear to me you tried all that)
Hello guys. I make my phone rooted yesterday and i really want to improve my phone, make it change(some fingerpring and etc) and really want better battery.
Can you please help me guys?
I just can tell what i used and satisfied:
Magisk and TWRP you use already.
Viper4Audio for better audio quality if you have good headset
I changed the Kernel to Kirisakura or Arter97 (still testing which is better)
For the look i use Renovate ICE v14 (on telegram channel)
And for bloatware i use xXx No Limit v12 (and in the prop file i manually choose what i need or not / Viper4Audio and Youtube Vanced included), but you can find 2 other scripts if you need just de-bloatware (dont remember the names but you can find here), and for anti-ad i use Energizer Pro (faster than ADFly)
warezxts said:
I just can tell what i used and satisfied:
Magisk and TWRP you use already.
Viper4Audio for better audio quality if you have good headset
I changed the Kernel to Kirisakura or Arter97 (still testing which is better)
For the look i use Renovate ICE v14 (on telegram channel)
And for bloatware i use xXx No Limit v12 (and in the prop file i manually choose what i need or not / Viper4Audio and Youtube Vanced included), but you can find 2 other scripts if you need just de-bloatware (dont remember the names but you can find here), and for anti-ad i use Energizer Pro (faster than ADFly)
Click to expand...
Click to collapse
First of all thanks for the comment.
Ive got viperFX, this is good version?
What is bloatware if i can ask?
With Renovate you can costumise what you want? Can you send me download link please?
About adblock, i searched for it in magisk but found something else, Energised protection. Its the same or should i download something else?
One more thing. I want app systemizer to delete administrator apps but i cant download it. I also cant download xposed and etc... Why?
ViperFX is good, the newest version is 2.7 but if you have 2.5 is the same good just 2.7 is better view (material theme)
Bloatware is what you want to remove. Its come with pre-installed app with your phone (ROM), for example facebook already installed by default.
xXx No limit ROM, have a custom file called build.prop. its a text file, if you want to install, you have to install via Magisk (can be remove anytime), and you can modify the build.prop before.
What you need, what you dont need. and put the xXx ROM file and the build.prop file in the xXx directory of your internal card. Dont worry, its not a "real" rom, it will leave your OxygenOS, just add/remove extras. Same way working the Renovate. Install via Magisk, can be removed anytime. Magisk is mostly for optical tuning, like change the font or color of statusbar etc. You can see both's features in the link.
https://forum.xda-developers.com/on...agisk-rom-xxx-nolimits-7-0-speed-ram-t3933927
https://forum.xda-developers.com/on...vate-ice-oxygenos-tweaks-stables-svn-t3934356
For NoLimit have newer version you can find it in OP8 topic, and RenovateIce have newer also, you can find in their Telegram channel.
this is the AD Blocker: https://energized.pro/ - you need a terminal emulator like Termux from google play.
the most popular script is Blu but the most blocked AD site is in Xtreme (slower of course but still fast). This can be download from Magisk repository (yes, energised protection)
About better battery, change the kernel to Kernel to Arter97 (https://forum.xda-developers.com/oneplus-7/oneplus-7-7-pro-7t-7t-pro-cross-device-kernel-development/arter97-kernel-oneplus-7-t3952578) from TWRP (it will recognise you have magisk, so nothing to do after install).
I want app systemizer to delete administrator apps but i cant download it. I also cant download xposed and etc... Why?
You can find MANY apps need root for delete system apps, but i recommend to use script, because you can recover if you make mistake.
For me the XPosed had problem (Actually the Riru -both - YAHFA and Sandhook) on my phone. So i cant tell.
I hope i could helped you.
warezxts said:
About better battery, change the kernel to Kernel to Arter97 (https://forum.xda-developers.com/on...evelopment/arter97-kernel-oneplus-7-t3952578) from TWRP (it will recognise you have magisk, so nothing to do after install).
.
Click to expand...
Click to collapse
You really helped me.
About the kernel, what version should i download? I see there 2 options.
Im adding screen shot.
About install it, i just need to download it, move to folder and then install by twrp?
maor23 said:
You really helped me.
About the kernel, what version should i download? I see there 2 options.
Im adding screen shot.
About install it, i just need to download it, move to folder and then install by twrp?
Click to expand...
Click to collapse
I cant see the screenshot, but i think the two version is android 9 (Pie) or android 10 (Q). Choose which one is your OOS version.
Yes, just go to TWRP and install, thats all. You can check in settings/about after if you changed or not.
warezxts said:
I cant see the screenshot, but i think the two version is android 9 (Pie) or android 10 (Q). Choose which one is your OOS version.
Yes, just go to TWRP and install, thats all. You can check in settings/about after if you changed or not.
Click to expand...
Click to collapse
Thank you my friend. How should i costumize the kernel for better battery performance?
warezxts said:
I cant see the screenshot, but i think the two version is android 9 (Pie) or android 10 (Q). Choose which one is your OOS version.
Yes, just go to TWRP and install, thats all. You can check in settings/about after if you changed or not.
Click to expand...
Click to collapse
i really need your help.
i flashed it with twrp and then i cant reboot. its only reboot to bootloader.
what can i do?
maor23 said:
Thank you my friend. How should i customize the kernel for better battery performance?
Click to expand...
Click to collapse
you can customize with https://play.google.com/store/apps/details?id=com.franco.kernel&hl=en_US but no necessary, already good
maor23 said:
i really need your help.
i flashed it with twrp and then i cant reboot. its only reboot to bootloader.
what can i do?
Click to expand...
Click to collapse
No panic
You have android 9 or 10? which one did you flash?
If unsuccessful, try with
https://forum.xda-developers.com/on...oss-device-kernel-development/kernel-t4002781
and there is script for the settings to FKM,
or you can try
https://forum.xda-developers.com/on.../kernel-kirisakura-1-0-0-op7-pro-aka-t3933916
You using OOS, right? which version?
warezxts said:
you can customize with https://play.google.com/store/apps/details?id=com.franco.kernel&hl=en_US but no necessary, already good
You have android 9 or 10? which one did you flash?
If unsuccessful, try with
https://forum.xda-developers.com/on...oss-device-kernel-development/kernel-t4002781
and there is script for the settings to FKM, or try
https://forum.xda-developers.com/on.../kernel-kirisakura-1-0-0-op7-pro-aka-t3933916
You using OOS, right? which version?
Click to expand...
Click to collapse
i've got android 10, oos 10.0.7
i downloaded what i needed(58v) but now im stuck.
god, please help me
maor23 said:
i've got android 10, oos 10.0.7
i downloaded what i needed(58v) but now im stuck.
god, please help me
Click to expand...
Click to collapse
You stuck after the kernel flash? was it successfull?
just try another one,but choose NOT custom kernel, choose OOS related. And wipe Dalvik cahe after, then reboot
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
try this: https://androidfilehost.com/?fid=8889791610682942786
Are you Verizon or on T-Mobile version?
warezxts said:
You stuck after the kernel flash? was it successfull?
just try another one,but choose NOT custom kernel, choose OOS related. And wipe Dalvik cahe after, then reboot
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
try this: https://androidfilehost.com/?fid=8889791610682942786
Are you Verizon or on T-Mobile version?
Click to expand...
Click to collapse
im not t-mobile.
i succeed to fix my phone bootloop.
i stucked after kernel flash yes.