Database Info

Xposed on 5.0.1

Has anyone had success installing xposed framework on the m8 running a stock rooted lollipop rom? I have tried multiple times following the guide in the xposed thread here http://forum.xda-developers.com/showthread.php?t=3034811 with no success.

It worked for me on adrenaline 2.1 but not on a couple of other roms I tried.

jas88 said:
It worked for me on adrenaline 2.1 but not on a couple of other roms I tried.
Click to expand...
Click to collapse
What were the steps you took to install it?

I opened xsposed installer >framework > reboot. I only downloaded a couple of modules but they work.

nmarietta said:
What were the steps you took to install it?
Click to expand...
Click to collapse
what steps are you using to install xposed? I have it working on Fluent 7.1 just fine.

BladeRunner said:
what steps are you using to install xposed? I have it working on Fluent 7.1 just fine.
Click to expand...
Click to collapse
I downloaded the files from the link I posted above..
Install the xposed installer .apk
Reboot from within the installer and grant root privileges.
Flash the framework via TWRP
I have also tried to flash the framework first, install the .apk, and reboot from within the installer to grant root.
Neither way has worked for me.

nmarietta said:
I downloaded the files from the link I posted above..
Install the xposed installer .apk
Reboot from within the installer and grant root privileges.
Flash the framework via TWRP
I have also tried to flash the framework first, install the .apk, and reboot from within the installer to grant root.
Neither way has worked for me.
Click to expand...
Click to collapse
I have it running on stock rooted, here are the steps I took.
Flashed the xposed arm zip file in TWRP
Installed the 3.0 alpha2 apk
Once installed I went into "framework" and hit soft reboot.
Once the phone was done I installed a module/made it active and soft reboot again.
I don't think you have to take these exact same steps but this is just what I did following a YT video. In "framework" it always says "Installation is only possible maunally via recovery for now." in red letters. That confused me into thinking it was not installed properly but all the modules I'm using are working fine.

The Stig 04 said:
I have it running on stock rooted, here are the steps I took.
Flashed the xposed arm zip file in TWRP
Installed the 3.0 alpha2 apk
Once installed I went into "framework" and hit soft reboot.
Once the phone was done I installed a module/made it active and soft reboot again.
I don't think you have to take these exact same steps but this is just what I did following a YT video. In "framework" it always says "Installation is only possible maunally via recovery for now." in red letters. That confused me into thinking it was not installed properly but all the modules I'm using are working fine.
Click to expand...
Click to collapse
I have tried to install this exact same way. After flashing the framework and installing the alpha .apk, I activated greenify and rebooted.
Upon launching greenify, I saw a yellow dialogue box that said auto hibernation service has stopped (auto hibernation worked fine before trying to use xposed) I attempted to enable the xposed features and a screen popped up telling me to install the xposed framework.
I have since restored my nand backup I made before flashing xposed, and greenify is back to auto hibernating, just cant use the xposed features.

nmarietta said:
I have tried to install this exact same way. After flashing the framework and installing the alpha .apk, I activated greenify and rebooted.
Upon launching greenify, I saw a yellow dialogue box that said auto hibernation service has stopped (auto hibernation worked fine before trying to use xposed) I attempted to enable the xposed features and a screen popped up telling me to install the xposed framework.
I have since restored my nand backup I made before flashing xposed, and greenify is back to auto hibernating, just cant use the xposed features.
Click to expand...
Click to collapse
Have you tried installing other modules? Looking around the greenify sections here on XDA seems it wasn't ready for 5.0, but there is a beta thread that you may want to take a look at.
http://forum.xda-developers.com/apps/greenify

The Stig 04 said:
Have you tried installing other modules? Looking around the greenify sections here on XDA seems it wasn't ready for 5.0, but there is a beta thread that you may want to take a look at.
http://forum.xda-developers.com/apps/greenify
Click to expand...
Click to collapse
I just found that beta thread, and I am now trying to install xposed again.
I also tried Xsense, and did not have any luck.
What modules are you using? I will activate them and test.

nmarietta said:
I just found that beta thread, and I am now trying to install xposed again.
I also tried Xsense, and did not have any luck.
What modules are you using? I will activate them and test.
Click to expand...
Click to collapse
Currently I'm using
Sense 6 lockscreen mods (LP)
Sense 6 Toolbox beta (to find the beta you have to change your settings, open the module in xposed/scroll all the way right to settings/change to "beta")
YouTube AdAway
YouTube Background Playback

The Stig 04 said:
Currently I'm using
Sense 6 lockscreen mods (LP)
Sense 6 Toolbox beta (to find the beta you have to change your settings, open the module in xposed/scroll all the way right to settings/change to "beta")
YouTube AdAway
YouTube Background Playback
Click to expand...
Click to collapse
I reinstalled xposed, and updated greenify to beta 11. I also installed Sense 6 Toolbox beta. Everything seems to be working just fine.
My problem was using modules that were not updated to work with lollipop. Thanks for all your help!

[MOD] Xposed Framework for Mediapad X2

Easy Android ROM Customization Through Xposed Framework
Here is Xposed Framework for the MediaPad X2. This allows for future customization of a lot of different things on our devices. Thanks to kpcheang2 for finding the original page with the download links.
Besides the usual customization we can do with Android launchers and Android widgets, we also love to try new features that available on custom ROMs. But custom ROMs can be unstable and buggy sometimes and the process to flash over to a new ROM is very time-consuming, especially if you need to restore your backup and app settings.
Through Xposed Framework, by just downloading and installing a ready-made module you can make modification (modules) to any element of the OS or the app itself without the need of flashing a new ROM. For example, if you ever need to skip YouTube ads on your android, download the module for that, install, enable and reboot your device for the effect to take place immediately.
Prerequisites:
-Unlocked bootloader
-Rooted
-TWRP Installed
-Be On B106 Or B109
Instructions:
First, install Xposed Installer by opening the apk and hitting install as you would any other app.
https://drive.google.com/file/d/0B5I_q70mNuR4N29ueEwtalBVUE0/view?usp=sharing
Second, boot into TWRP and install the Xposed Framework:
https://drive.google.com/file/d/0B5I_q70mNuR4cThvN2RkU2dOdkE/view?usp=sharing
After rebooting you will have working xposed framework on your phone. Open it up and in settings check "Disabled Resource Hooks" Now reboot once more. Now you need to find modules that work. There are modules for pretty much anything you want done to your phone. The problem is none of them support our X2 yet (or at least none that I've tried) This is just a start as I'm sure there will be modules coming out to support our devices. After installing a module go into Xposed Installer and into Modules and check the Module you want to use in there. Then restart your phone foe the module to take effect.

ajsmsg78 said:
Easy Android ROMs Customization Through Xposed Framework
I present to you Xposed Framework for the MediaPad X2. This allows for future customization of a lot of different things on our devices. Thanks to kpcheang2 for finding the original page with the download links.
Besides the usual customization we can do with Android launchers and Android widgets, we also love to try new features that available on custom ROMs. But custom ROMs can be unstable and buggy sometimes and the process to flash over to a new ROM is very time-consuming, especially if you need to restore your backup and app settings.
Through Xposed Framework, by just downloading and installing a ready-made module you can make modification (modules) to any element of the OS or the app itself without the need of flashing a new ROM. For example, if you ever need to skip YouTube ads on your android, download the module for that, install, enable and reboot your device for the effect to take place immediately.
Prerequisites:
-Unlocked bootloader
-Rooted
-TWRP Installed
Instructions:
First, install Xposed Installer by opening the apk and hitting install as you would any other app.
https://drive.google.com/file/d/0B5I_q70mNuR4N29ueEwtalBVUE0/view?usp=sharing
Second, boot into TWRP and install the Xposed Framework:
https://drive.google.com/file/d/0B5I_q70mNuR4cThvN2RkU2dOdkE/view?usp=sharing
After rebooting you will have working xposed framework on your phone. Now you need to find modules that work. There are modules for pretty much anything you want done to your phone. The problem is none of them support our X2 yet (or at least none that I've tried) This is just a start as I'm sure there will be modules coming out to support our devices. After installing a module go into Xposed Installer and into Modules and check the Module you want to use in there. Then restart your phone foe the module to take effect.
Here is one module that works:
https://drive.google.com/file/d/0B5I_q70mNuR4bEhHZC03bVFiNUE/view?usp=sharing
Click to expand...
Click to collapse
Thanks ! I plan to try out in a few days after I get myself up to B109.

goes into bootloop
goes into bootloop on stock b109 i had it running fine on kang vip

Bootloop, too
I'm using the 702L with ajsmsg's B109.
--- Edit:
With B106 by guduke also a bootloop
With B109 KangVIP I got the error "framework is installed but not active, please check logs" (these are empty)
Re-Install and/or Restarts takes no effects.
I'm giving up...
---
Please let us know with which configuration/build (whatever) you're able to run xposed. It's much more important for me then a "current" Android build. To ensure the right result, I suggest also to upload all relevant files to get your config.
Many thanks in advance.

dand751801 said:
Bootloop, too
I'm using the 702L with ajsmsg's B109.
--- Edit:
With B106 by guduke also a bootloop
With B109 KangVIP I got the error "framework is installed but not active, please check logs" (these are empty)
Re-Install and/or Restarts takes no effects.
I'm giving up...
---
Please let us know with which configuration/build (whatever) you're able to run xposed. It's much more important for me then a "current" Android build. To ensure the right result, I suggest also to upload all relevant files to get your config.
Many thanks in advance.
Click to expand...
Click to collapse
hey bud if it says installed all you do is soft reboot on xposed and it will activate but you have to check disable resource hooks in settings only works on kang vip b109 and b106 v2

dand751801 said:
Bootloop, too
I'm using the 702L with ajsmsg's B109.
--- Edit:
With B106 by guduke also a bootloop
With B109 KangVIP I got the error "framework is installed but not active, please check logs" (these are empty)
Re-Install and/or Restarts takes no effects.
I'm giving up...
---
Please let us know with which configuration/build (whatever) you're able to run xposed. It's much more important for me then a "current" Android build. To ensure the right result, I suggest also to upload all relevant files to get your config.
Many thanks in advance.
Click to expand...
Click to collapse
I'm running it on my KangVIP Ultra Slim Max Debloat ROM on B109.

1219chicho said:
hey bud if it says installed all you do is soft reboot on xposed and it will activate but you have to check disable resource hooks in settings only works on kang vip b109 and b106 v2
Click to expand...
Click to collapse
Could you be more detailed about which 'resource hooks' are to be disabled? I suspect so my problems with exposed are tied with some settings. I am running B109 KangVIP debloated , but not so heavy as @ajsmsg78's.

1219chicho said:
hey bud if it says installed all you do is soft reboot on xposed and it will activate but you have to check disable resource hooks in settings only works on kang vip b109 and b106 v2
Click to expand...
Click to collapse
You're right.
With deactivated resource hooks option, I can active the framework.
I also activated xprivacy but the module say's only "restart required" ... it doesn't work.
I'm so close to the target .... just one step left.
//Edit: After more installed modules, I was able to activate xprivacy successfully

trurl3 said:
Could you be more detailed about which 'resource hooks' are to be disabled? I suspect so my problems with exposed are tied with some settings. I am running B109 KangVIP debloated , but not so heavy as @ajsmsg78's.
Click to expand...
Click to collapse
in the xposed framework app settings you see the option just check it and your good to go

When I had the Ascend mate 2 I had edit the build prop to get xposed to work. I had to change the
" ro.config.hwtheme=2 change the 2 to 0 and reboot
I used apex launcher with that because it disables a few things.

does this work with b110?
I had a bootloop when I tried it, so if anybody already has it working with b100, I'll try it again.
Thanks - Wolfgang

ajsmsg78 said:
Easy Android ROM Customization Through Xposed Framework
Here is Xposed Framework for the MediaPad X2.
Click to expand...
Click to collapse
Hello, the installation failed, because I "GEM-701L" and this is Android 5.0, 3.0.5 EMUI.
Please much can be done to Android 5.0 (SDK21)?
THANKS!
From your phone:
! Wrong Android version: 5.0 / SDK21
! This file is for: 5.1 / SDK22
Error flashing zip xposed-v75-sdk22-arm64.zip

Try to upgrade to a 703L ROM. After that try to install xposed. It should be working.
--> http://forum.xda-developers.com/mediapad-x2/general/how-to-flash-rom-x2-gem-703l-gem-702l-t3228915

I'm not sure if then (flash on GEM-703L) I have a functional LTE as the GEM-701L?
Many thanks for the advice.

You need to upgrade to B106 or B109 for this to work.

del

ajsmsg78 said:
You need to upgrade to B106 or B109 for this to work.
Click to expand...
Click to collapse
And if I do not upgrade?
Could you do it-my quote:
"Please much can be done to Android 5.0 (SDK21)?"
EDIT:
Can I please on Android 5.0 phone MedaiPad X2 GEM-install 701L
"xposed-v75-sdk21-arm64.zip"?
Here:
https://drive.google.com/file/d/0B2FG4wbnEIzvTndONG4wdlVUNGM/view
EDIT2:
So installation "xposed-v75-sdk21-arm64.zip" was successful, but the phone goes just wifi.
Then restoring from backup TWRP. I was scared

Works on 701L B109 Kangvip

I'm afraid you upgrade from 701 to 703.
I would like Xposed Framework on 701 with Android 5.0 ...

Ante666 said:
I'm afraid you upgrade from 701 to 703.
I would like Xposed Framework on 701 with Android 5.0 ...
Click to expand...
Click to collapse
We all have the same problems...
But Huawei's support for internation models are ... not existing. So we all want to upgrade our models to a 703L ROM to get new updates (like announced Android 6) and to improve our phones.
It was a hard and long way to unlocking, rooting and installing of the xposed framework. And I'd say, nobody will also make it possible for the "only-one" user, who wants to stay on a 701L ROM. There are too many restrictions, too many limitations and no further updates from huawei. I really don't see a reason to stay on this ROM. My 702L works fine with the 703L ROM.

BS_FREE_Lollipop_5.0_Rom_BPB1_Based

This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.

reserved

reserved1

Can this be dirty flashed over your bs free bok3?
Sent from my SM-G900V using Tapatalk
---------- Post added at 05:14 PM ---------- Previous post was at 04:53 PM ----------
Just dirty flashed. All is good so far. Thank you
Sent from my SM-G900V using Tapatalk

I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?

renthispace said:
I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Click to expand...
Click to collapse
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.

Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.

Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.

renthispace said:
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?
Click to expand...
Click to collapse
twelvevyan said:
Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.
Click to expand...
Click to collapse
I don't have any of these problems on mine. Does anybody else? It sounds like you guys might have some bad data from a previous ROM. The Play Store was updated in this ROM, so clear data for the Play Store, and that might fix the problem.
Stupifier said:
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.
Click to expand...
Click to collapse
It is just security patches in this ROM. I haven't found anything really new.
btonetbone said:
Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.
Click to expand...
Click to collapse
I wouldn't expect Google Calendar to work, because it's not in the ROM lol.

Few Questions
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Big Thanks for your help.
I'm going to start a backup of current ROM so I'll be ready to install this soon.
Regards,
NerdyKowboy

NerdyKowboy said:
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Click to expand...
Click to collapse
Yes, flash means install in Safestrap.
If you flash the Xposed zip I linked in the original post, then you can use modules in the Xposed installer app included in the ROM.

CVertigo1 said:
This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.
Click to expand...
Click to collapse
1.) In safestrap, just do wipe->factory reset or is more of a wipe required?
2.) Can I flash them all using the Zip Queue in Safestrap (TWRP 2.7.1.0) or should I do them one at a time?

Factory reset in factory recovery. You can install all of them on one queue.

CVertigo1 said:
Factory reset in factory recovery. You can install all of them on one queue.
Click to expand...
Click to collapse
I did that, and this is AWESOME. Love the ROM. Tough to decide between the two launchers. Haven't had this level of control in a while.
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1

NerdyKowboy said:
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1
Click to expand...
Click to collapse
I believe Android Pay doesn't work sheerly because the device is rooted, not because of the ROM itself.

Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)

Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...

renthispace said:
Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...
Click to expand...
Click to collapse
Since Xposed is already in the ROM, inside of Xposed, go to Downloads & download the module "NoSafeVolumeWarning". Enable it and reboot.
Boom. No more volume warning.

NerdyKowboy said:
Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)
Click to expand...
Click to collapse
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18

al50 said:
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18
Click to expand...
Click to collapse
Yes, that fixed the issue.
Successfully uninstalled Xposed, Reinstalled SnapChat and logged in without issue. Then, reflashed the Xposed framework.
So easy, but I was so nervous doing it after seeing many, many people talking about getting hung in a bootloop.

[Huawei P9 Nougat info/guides]

So I've been getting lots of different questions about how to get this and that on android 7.0 nougat so to make it easier for everyone to find ill create this thread.
1. TWRP
Is twrp available for N? If so where can I find it?
http://forum.xda-developers.com/p9/how-to/twrp-3-0-2-0-n-t3506947
2. ROOT
Oh cool now I have twrp. So how can I root?
Download phh r275 version and flash
Download and install Material phh apk: Release post
Now you should be good to go. If any issues feel free to ask here or in phh official thread.
3. BUSYBOX
User friendly zip flash this and the below steps isn't needed!
Flashable zip (1.25.1) : https://mega.nz/#!zlRm3S4B!9rAtfi0wI8oFu6xjJITgF0dRwV21UPsxvZQZzMo6VXk
This one is a bit tricky. If you run root. But
Download jrummy's busybox on Gplay.
Select installation folder to /system/xbin or if u don't want to touch system folder use /sbin if available. U can replace jrummy''s busybox with stericsson version if you like it better. But you must have installed jrummys version first if you're booted into android. Else stericsson busybox might have issues installing. Or u can use zips which contains busybox Google busybox flashable.
4. VIPER
More user friendly if using this zip the below steps should only need se Linux mode changer!
Flashable zip: https://mega.nz/#!f8wlzIrB!vVCAv-xqWB8lOrcQTgIyFL0WS7MFsE9iFb08E1YKV2Y
Is quite a mess to get working. You need se Linux mode set to permissive. Flash guitarheroes version of v4a (2.5.0.5) once flashed you need to replace the audio effects in /vendor/etc/audio_effects else you'll get I/O driver installation failed. Copy the .so files to /system/lib and /system/lib64 and set correct permission. If you have wrong busybox message. Try different versions of busybox but I use latest from stericsson and it works great. Hope u get it working.
Oh and don't forget to allow sd storage access or you'll get driver I/O error as well. And se Linux changed to permissive use se Linux mode changer for it. It works great with phh!
5. MAGISK
As it seems to be now. Magisk won't work due to loop issues on boot. And mount seems to have losetup fail 1 on mounting a .img while booted.
6. Xposed
Not yet available. Be patient rovo needs time we can wait for him
7. comes soon.
More stuff.
Sent from my FRD-L09 using Tapatalk

how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).

paratox said:
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
Click to expand...
Click to collapse
It doesn't matter if it's aosp. Since it is for v4a it will work. As long as the audio effects works it doesn't matter.
Also I just finished my hopefully new nougat viper4android zip (i made my own for M with material designed version for my s5 neo) which worked fine until now.
Now it extract all files to its locations even to /vendor partition which all zips I used previously never had. I'll also update busybox zip which previous available is 1.24.2 which I'll bump up to 1.25.1.
I'll also going to upload my stuff to android file host. But that will be later
New files can be found https://mega.nz/#F!HlpzlaZL!wGNoJinVPZL0YiBcdbLlKA
Tapatalk is messing with the link
Sent from my FRD-L09 using Tapatalk

Updated op with latest busybox by stericsson. More user friendly now
Sent from my FRD-L09 using Tapatalk

LastStandingDroid said:
Updated op with latest busybox by stericsson. More user friendly now
Click to expand...
Click to collapse
Nice job mate!

dodgedroid said:
Nice job mate!
Click to expand...
Click to collapse
Easy to do when you got a zip for it just update the busybox executable and replace old one
Sent from my FRD-L09 using Tapatalk

Installation of ARISE
paratox said:
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
Click to expand...
Click to collapse
How did you installed ARISE in Nougat?
I've been trying all day and I'll always end with an I/O or Busybox error. I tried a lot of things, like changing /vendor/etc/audio_effect.conf to audio_effect.conf.bak or installing Busybox into system/bin, but none of them seems to work for me.
I'm on B361 btw. And sorry for answering an old post

LastStandingDroid said:
Also I just finished my hopefully new nougat viper4android zip (i made my own for M with material designed version for my s5 neo) which worked fine until now.
Now it extract all files to its locations even to /vendor partition which all zips I used previously never had...
New files can be found https://mega.nz/#F!HlpzlaZL!wGNoJinVPZL0YiBcdbLlKA
Click to expand...
Click to collapse
Do you know, is your Viper4Android installer compatible with the following rooting/Busybox configuration:
- L09 c432/b378
- TWRP 3.1.0-0
- SuperSU-v2.79-201612051815-EMUI5.0.zip
- Rummy"s BusyBox (installed to /system/xbin)
as described by @hakaz and @Atarii in the post #102 and follow-ups:
https://forum.xda-developers.com/showpost.php?p=71588837&postcount=102
Also, should SELinux really be switched to Permissive mode for V4A to work on P9 with Nougat?
Thanks

zgfg said:
Do you know, is your Viper4Android installer compatible with the following rooting/Busybox configuration:
- L09 c432/b378
- TWRP 3.1.0-0
- SuperSU-v2.79-201612051815-EMUI5.0.zip
- Rummy"s BusyBox (installed to /system/xbin)
as described by @hakaz and @Atarii in the post #102 and follow-ups:
https://forum.xda-developers.com/showpost.php?p=71588837&postcount=102
Also, should SELinux really be switched to Permissive mode for V4A to work on P9 with Nougat?
Thanks
Click to expand...
Click to collapse
Yes it should be compatible and yes u need to switch to permissive mode else it'll be asking you to install over again, or simply not start to work
Sent from my CUBOT_MANITO using Tapatalk

LastStandingDroid said:
Yes it should be compatible and yes u need to switch to permissive mode else it'll be asking you to install over again, or simply not start to work
Click to expand...
Click to collapse
Yes, thanks, I have flashed your Viper.zip through TWRP and installed vViPERFX_v2.5.0.5.apk
I have also installed SELinuxModeChanger and set SELinux mode to stay Permissive over rebooting
Viper4Android works fine - thanks

LastStandingDroid said:
5. MAGISK
As it seems to be now. Magisk won't work due to loop issues on boot. And mount seems to have losetup fail 1 on mounting a .img while booted.
Click to expand...
Click to collapse
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method

simo255 said:
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
Click to expand...
Click to collapse
Having Magisk, can you now also install Xposed?
PS: Please provide links to your resources and threads.
Btw, you have P9 Lite - does the method for Magisk apply also to (regular) P9 (single SIM)?

zgfg said:
Having Magisk, can you now also install Xposed?
PS: Please provide links to your resources and threads.
Btw, you have P9 Lite - does the method for Magisk apply also to (regular) P9 (single SIM)?
Click to expand...
Click to collapse
it workes because we have a modded boot.img created by @HassanMirza01, ask him what he did so as to he will do the same for p9 boot.img(or anyone else)
install selinux and set it to permissive, after that install magisk app via playstore and click on autoinstall
no xposed isnt working because there is no xposed for Nougat.

simo255 said:
it workes because we have a modded boot.img created by @HassanMirza01, ask him what he did so as to he will do the same for p9 boot.img(or anyone else)
install selinux and set it to permissive, after that install magisk app via playstore and click on autoinstall
no xposed isnt working because there is no xposed for Nougat.
Click to expand...
Click to collapse
Can you post the link to install his kernel?

Danymat said:
Can you post the link to install his kernel?
Click to expand...
Click to collapse
it won't work because it's a boot.img of p9 lite not for p9

simo255 said:
it won't work because it's a boot.img of p9 lite not for p9
Click to expand...
Click to collapse
So for p9 we don't have any solutions to install magisk?

Danymat said:
So for p9 we don't have any solutions to install magisk?
Click to expand...
Click to collapse
try to install the pre rooted boot.img (phh one) via this link https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
and follow the steps that i wrote above

simo255 said:
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
Click to expand...
Click to collapse
Is this using a Magisk.img in /data folder?
As said magisk can be made working since we had supersu working by chain I still doubt it uses a loop
Sent from my CUBOT_MANITO using Tapatalk

LastStandingDroid said:
Is this using a Magisk.img in /data folder?
As said magisk can be made working since we had supersu working by chain I still doubt it uses a loop
Click to expand...
Click to collapse
no there is no magisk.img folder, but there is a magisk folder which include those files (look at the screenshot

simo255 said:
no there is no magisk.img folder, but there is a magisk folder which include those files (look at the screenshot
Click to expand...
Click to collapse
Yes this is how Magisk is being made working
Sent from my CUBOT_MANITO using Tapatalk

[Xposed] Samsung Galaxy J7 Prime

Installing Xposed Framework for Samsung Galaxy J7 Prime​
Doing this may cause your device to be bricked or stuck in a Bootloop, so you're solely responsible for any damage caused to your phone​
Downloads :​
XposedInstaller.apk : Must be installed to manage installed modules, the framework won't work without it.
Xposed.zip : Must be flashed using a custom recovery, if you don't have one yet check out my thread here to see how to flash CWM recovery.
XposedUninstaller.zip : If you want to uninstall the framework/If you are stuck in a bootloop.
Use Sideload to flash Zip because there's an issue of SDCARD and EXTSDCARD not mounting in CWM Recovery
First boot up your phone into CWM recovery
Go to Install zip update package and select Install zip from sideload
Now connect your android device to your computer
Download this and extract it.
Open command prompt in the ADB folder (mfastboot-v2 folder) by right clicking in the empty space of the folder while holding the Shift key.
Copy the Zip file you want to install on your device to the ADB folder, in this case Xposed.zip.
Run the following command to sideload zip to your phone : adb sideload <filename.Zip>
In this case adb sideload Xposed.zip
Similarly if you want to uninstall the framework flash XposedUninstaller.zip.​
Credits:
@rovo89 @wanam​

The xposed version you have posted above is causing continous bootloop. I installed it on my J7 Prime 610F. Then since being a long time samsung user. i knew that maybe i have to flash xposed framework version made by Wanam for Samsung devices.
So The wanam xposed V86.1 Sdk23 for Arm 32bit works fine and then the phone booted up. better change it to this version in ur above link bro
Thanks for the detailed adb guide as we know still TWRP Touch or drives in CWM are not mounting and one has to use the adb commands. for J7 Prime

kingwicked said:
The xposed version you have posted above is causing continous bootloop. I installed it on my J7 Prime 610F. Then since being a long time samsung user. i knew that maybe i have to flash xposed framework version made by Wanam for Samsung devices.
So The wanam xposed V86.1 Sdk23 for Arm 32bit works fine and then the phone booted up. better change it to this version in ur above link bro
Thanks for the detailed adb guide as we know still TWRP Touch or drives in CWM are not mounting and one has to use the adb commands. for J7 Prime
Click to expand...
Click to collapse
Thanks dude
I'll definitely use wanam links as it's working fine on J7 2016
P.S. This one should be good? xposed-v87.1-sdk23-arm-custom-build-by-wanam-20161125.zip
And yes i've already updated the links

Yes i think so it should .never had problems with Xposed framework by wanam for Samsung devices , doesnt cause bootloops.
I have V86.1 by wanam sdk23...Will test the V87 as well....

kingwicked said:
Yes i think so it should .never had problems with Xposed framework by wanam for Samsung devices , doesnt cause bootloops.
I have V86.1 by wanam sdk23...Will test the V87 as well....
Click to expand...
Click to collapse
Okay...i think i'll give Xposed a try to

help me out from this
your work is absolutely appreciable but, the link you given is doesn't work, i m trying to all off way to flash xposed.zip in my sm-j610f but all are stuck me, pls give update of framework, bcs... i can't live without gravity box and xmessanger privacy premium and so many module, and also guide how use viper4android on j 7 prime

nyk978 said:
your work is absolutely appreciable but, the link you given is doesn't work, i m trying to all off way to flash xposed.zip in my sm-j610f but all are stuck me, pls give update of framework, bcs... i can't live without gravity box and xmessanger privacy premium and so many module, and also guide how use viper4android on j 7 prime
Click to expand...
Click to collapse
Xposed Framework for Samsung Devices by wanam works just fine , im using it at the moment.. download from here. i dont use viper4 android so no idea...
https://www.androidfilehost.com/?fid=529152257862685344

thanks for the link, I'll try it today and tall you the success rate
and, viper4android is the sound enhancement, like... dolby atmos, but more then Dolby

kingwicked said:
Xposed Framework for Samsung Devices by wanam works just fine , im using it at the moment.. download from here. i dont use viper4 android so no idea...
thanks bro
it is work like charm...
thank you so much my friend
success rate... 100% :laugh:
Click to expand...
Click to collapse

Link Caidos
Link Rotos

Dear @kingwicked
At first: Sorry for intruding , But I think you can help Because of your experience in xposed
I used APM (xposed module ) in order to manage & mode power button menu as : ....advanced reboot..screen recorder & shots..
it worked for almost phones except J7p
kindly can you guide me to an working one ( module) to manage power button
thanks in advance
---------- Post added at 03:54 ---------- Previous post was at 03:38 ----------
BTW @HaxerProz
since TWRP forJ7p It evolved more
so if you have pen-drive (USBotg) you can put your needed *zips
as xposed or other, and simply flash them via twrp
after you mount you usb storage ( tested by me)
maybe also you can use flashify.apk ( I didn't test it )

xcorona said:
Dear @kingwicked
At first: Sorry for intruding , But I think you can help Because of your experience in xposed
I used APM (xposed module ) in order to manage & mode power button menu as : ....advanced reboot..screen recorder & shots..
it worked for almost phones except J7p
kindly can you guide me to an working one ( module) to manage power button
thanks in advance
---------- Post added at 03:54 ---------- Previous post was at 03:38 ----------
BTW @HaxerProz
since TWRP forJ7p It evolved more
so if you have pen-drive (USBotg) you can put your needed *zips
as xposed or other, and simply flash them via twrp
after you mount you usb storage ( tested by me)
maybe also you can use flashify.apk ( I didn't test it )
Click to expand...
Click to collapse
dont have J7 anymore sold it... sorry mate

EDIT: Never mind. Answered my own question.

Recommend using the wanam xposed V86.1 Sdk23 for Arm 32bit like @kingwicked
The version v87.1 you have post still causing bootloop on my phone J7 prime sm-g610f.
And, fix the links for xposed framework and xposed uninstaller please.

hai9997 said:
Recommend using the wanam xposed V86.1 Sdk23 for Arm 32bit like @kingwicked
The version v87.1 you have post still causing bootloop on my phone J7 prime sm-g610f.
And, fix the links for xposed framework and xposed uninstaller please.
Click to expand...
Click to collapse
Hi there. Did you wipe cache & dalvik cache after flashing 87.1?

Fiasco said:
Hi there. Did you wipe cache & dalvik cache after flashing 87.1?
Click to expand...
Click to collapse
No, I didn't. Is that the reason which caused bootloop?

hai9997 said:
No, I didn't. Is that the reason which caused bootloop?
Click to expand...
Click to collapse
That may be the reason. I flashed 87.1 on my J7 Prime, then wiped cache & dalvik cache and after the first boot, (which takes a while), it booted into the OS with Xposed installed.

Fiasco said:
That may be the reason. I flashed 87.1 on my J7 Prime, then wiped cache & dalvik cache and after the first boot, (which takes a while), it booted into the OS with Xposed installed.
Click to expand...
Click to collapse
Oh thank you. I'll try re-flash v87.1.
Btw, do you have xposeduninstaller?

hai9997 said:
Oh thank you. I'll try re-flash v87.1.
Btw, do you have xposeduninstaller?
Click to expand...
Click to collapse
All wanam files are hosted here: https://www.androidfilehost.com/?w=files&flid=37508

nothing happens
after flashing xposed v8.7.1 it just said placing files done and ended the process after i reboot there is no xposed.. same happened when i tried flashing 8.6.1. any help guys?