Hi guys! Thanks for read me!
My phone is dead after trying to downgrade with the huawei rollback file, I connect it to the charger and it shows me a red circle with a ray inside, a few seconds later the same circle but green and automatically turns on and stays on the logo , If I disconnect the charger it will turn off after seconds, if I keep the charger connected to the cell phone and I left pressed the power button pressed for 10 seconds the cell phone will turn itself off and it will only turn on again.
I tried the dload, but I do not get the cell to reinstall because it turns on by itself and I press the Vol + Vol - and Power keys, but nothing happens, it does not go into eRecovery, I'm new to the huawei ...
Can anybody help me?
Huawei Honor 8
Version: FRD-L04
Regards
extract the rollback package,copy the UPDATE.app which you extracted earlier, to dload(create this folder in sd card)
power off your device and press all the three buttons
Related
when i turn my mobie on it only showing white screen . and after connecting my phone with pc if i press vol (-) and power key then its showing firstboot and resque mood. i connet my phone with hisuite and try to recover it but after compleet the download 100% the phone is disconnet form the pc automatically.. and all those problem was start when i try to upgare my phone.. after upgrading 30% it failed, so i restart the phone,, and from then its not working anymore... please help me
thanks for reading
I had installed U8860_EmotionUI_1.5_V100R001C00B606 (Chinnese version) ROM to my phone and i wanted to reinstall it to original U8860,Android 2.3,V100R001C00B886, General Version, so i followed tutorial on this site from /showthread.php?t=1457490 thread.
After flush was completed i restarted phone and it was showing huawei logo, and then phone will shut down. I had no recovery mode, the only thing that was working was pink screen. Tried to put dload to sdcard of B886 ROM but cant install it. Because nothing was working i placed all my original (had copy of "image" folder before changing to any other ROM) image files (that "image" folder) to phone through pink mode.
One good thing that happend after flush, and its working now, is that i now can access to my phone throught pink screen, can see all partitions.
Power button, VOLUP + power, VOLDOWN + power: blue screen
Power button + VOLUP + VOLDOWN : sometimes pink sometimes blue screen
Place dload to sdcard + Power button + VOLUP + VOLDOWN : can see only progress bar, after some time it will stop and red light on my phone will start blinking. Like shown in dload.jpg image.
sd_update.log: dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
When phone is turned off and i connect it to pc it will power on it self and show sometimes pink sometimes blue screen
Tried to place dload to internal memory but nothing was happening
So how can i fix this?
Hi there,
Here is some index for your device where you can ask for that:
ALL in ONE thread for HUAWEI HONOR u8860 a.k.a GLORY
Huawei U8860 Honor / Honour / Glory - Index
For more questions about please post here: [Q] Huawei honor u8860 how to flash b879 ROM?
Good luck
I wiped data etc using TWRP in order to flash a new rom and stupidly decided in the file manager withing TWRP to go into each folder that was left over and delete them, so I did and in the middle of the process TWRP froze, I managed to turn the device off by holding the power button. Tried turning it on and nothing happened, so I pressed VOL UP + Power for 5 secs, vibrated 3 times and now it gets stuck in the SONY logo. Nothing else, I tried pressing the VOL UP and DOWN button and nothing happens... Is this salvageable?
I did these steps:
"Download flashtool and download a .ftf file from HERE (anyone will do they are all the same)
now open up flashtool and it will tell you to move files from *folder* to *.flashtool folder* also place the .ftf file in the new folder
now click the lightning symbol - flashmode
click the firmware you downloaded
and click flash
now on your device hold down the POWER + VOLUME buttons until the device vibrates 3 times (this will turn it off)
hold the VOLUME DOWN ( & nothing else - make sure the phone is off for this) while holding vol down, plug the phone into the computer. You should see the led turn red then green/blue
flashtool will now see the device in flashmode and flash the firmware (when the firmware has been read by flashtool)"
And the LED goes super fast from red/orange to green and turns off but nothing happens afterwards, flashtool keeps waiting and nothing.
Thanks :/
Is the device showing up on your computer?
Sent from my iPhone using Tapatalk
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Miticohtc said:
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Click to expand...
Click to collapse
Anyone can help me?
Guys guys Science may have found a solution right now ... will luckily I do not know, however, acts, then taken by anxiety, I did a downgrade of the OS taking it to the first version available from asus website:
https://www.asus.com/it/Phone/ZenFon...Desk_Download/ and download the oldest! that is, the first at the bottom, downloaded the zip file, and insert it in SD, reboot the phone in boot pressed power button and volume +, with selected RECOVERYMOD down key and select it with the power button, go into recovery and select update from SD car, flashed the firmware previously downloaded and placed in SD at the end you do the second wipe data factory and wipe cache, and reboot, there will dawn upgrade the touch, but the startup screen with the set of languages, now do not do anything and restart again, now it appears the annoying firmware upgrade again always with 0% but the screen "press and hold the power button ... etc .." do it and you will see that it will restart the cell, proceed quietly with the set of the options and creating acount, now every time you turn it on or ravviate, will win for a second the annoying pop-ups but the cell will reboot again and will turn on normally, it is not the best solutions but at least you can use your device, I hope I was helpful and let me know
PS SORRY FOR MY BAD ENGLISH
FIX FILE
HI guy this is a solution, download it,insert in SD card,and flash via recovery
https://www.dropbox.com/s/yyfuxude558rbpj/UL-ASUS_Z00D-WW-12.16.4.3-user.zip?dl=0
Hi,
After a wrong(?) update of stock ROM, the phone stuck at logo. I can switch if off, but when try switch on into recovery (Vol- + On) LED blinks and symbol of empty battery shows on the screen.
When I attach a charger, after some time the phones start up ... then hangs on the logo.
Any idea how to reset/update/recover?......
Wojtek
Anybody? Help...
Try this if you have unlocked bootloader and frp unlock
1. First connect it charger and leave it for 30 min
2. Now connect phone to pc and long press power button until screen shuts off. Quickly hold vol- button. Now you will be in fastboot.
3. Flash appropriate twrp recovery in fastboot.
4. Now use huru updater method for firmware flash. (search in google)
But if none of this thing works and if you are still in warranty then take it to customer care