I had installed U8860_EmotionUI_1.5_V100R001C00B606 (Chinnese version) ROM to my phone and i wanted to reinstall it to original U8860,Android 2.3,V100R001C00B886, General Version, so i followed tutorial on this site from /showthread.php?t=1457490 thread.
After flush was completed i restarted phone and it was showing huawei logo, and then phone will shut down. I had no recovery mode, the only thing that was working was pink screen. Tried to put dload to sdcard of B886 ROM but cant install it. Because nothing was working i placed all my original (had copy of "image" folder before changing to any other ROM) image files (that "image" folder) to phone through pink mode.
One good thing that happend after flush, and its working now, is that i now can access to my phone throught pink screen, can see all partitions.
Power button, VOLUP + power, VOLDOWN + power: blue screen
Power button + VOLUP + VOLDOWN : sometimes pink sometimes blue screen
Place dload to sdcard + Power button + VOLUP + VOLDOWN : can see only progress bar, after some time it will stop and red light on my phone will start blinking. Like shown in dload.jpg image.
sd_update.log: dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
When phone is turned off and i connect it to pc it will power on it self and show sometimes pink sometimes blue screen
Tried to place dload to internal memory but nothing was happening
So how can i fix this?
Hi there,
Here is some index for your device where you can ask for that:
ALL in ONE thread for HUAWEI HONOR u8860 a.k.a GLORY
Huawei U8860 Honor / Honour / Glory - Index
For more questions about please post here: [Q] Huawei honor u8860 how to flash b879 ROM?
Good luck
Related
i followed these instructions to root my htc magic
on theunlocker .com - How to:Root your android phone (superoneclick method)
then i tried to load a custom rom using this method
theunlocker .com - Howto: Load a Custom ROM on your android phone (after any one click root method)
when i tried to reboot my phone in recovery mode using rom manager the phone restarted and keeps looping the rogers logo
it wont stop unless i take out the battery
it wont let me reboot the phone in any mode by:
1.) holding the down volume + power
2.) holding the home button + power
3.) holding the back button +power
though it will let me hold the trackball + power button... but the screen remains black the only thing t change is the colour light at the top goes blue
if anyone has any ideas how to help please feel free to suggest
Dear Everyone,
I bought an MT7-TL10 with this stuck problem, because I thought I can solve this with Your help.
I put down it's back to always be near to the battery.
There are more style of stuck.
1. Power button - when I power on, it stucks at Ascend logo. and after afew seconds reboot to recovery mode oky after that i tried to wip data factory reset and again reboot to recovery mode
I can shut down while holding Power Button + Volume Down, but after this, reboot to recovery mode
2- no fastbootmode
3- HiSuite doesn't see it
4-ADB installer doesn't see it.
5- (insert microSD with dload/update.app inside Power Button + Volume Down + Volume Up → nothing happens).
So please share any idea with me, I'd like to fix it, but don't know how...
Maybe if ADB or HiSuite would see it's connected, would be easier...
Thank You all!
i have same problems no recovery mood with no flashing errror????!!!!!
I wiped data etc using TWRP in order to flash a new rom and stupidly decided in the file manager withing TWRP to go into each folder that was left over and delete them, so I did and in the middle of the process TWRP froze, I managed to turn the device off by holding the power button. Tried turning it on and nothing happened, so I pressed VOL UP + Power for 5 secs, vibrated 3 times and now it gets stuck in the SONY logo. Nothing else, I tried pressing the VOL UP and DOWN button and nothing happens... Is this salvageable?
I did these steps:
"Download flashtool and download a .ftf file from HERE (anyone will do they are all the same)
now open up flashtool and it will tell you to move files from *folder* to *.flashtool folder* also place the .ftf file in the new folder
now click the lightning symbol - flashmode
click the firmware you downloaded
and click flash
now on your device hold down the POWER + VOLUME buttons until the device vibrates 3 times (this will turn it off)
hold the VOLUME DOWN ( & nothing else - make sure the phone is off for this) while holding vol down, plug the phone into the computer. You should see the led turn red then green/blue
flashtool will now see the device in flashmode and flash the firmware (when the firmware has been read by flashtool)"
And the LED goes super fast from red/orange to green and turns off but nothing happens afterwards, flashtool keeps waiting and nothing.
Thanks :/
Is the device showing up on your computer?
Sent from my iPhone using Tapatalk
Hi there,
I have a Honor 6 H60-L04 B371 and I can't boot the phone in FastBoot.
I read online that I have to press Power + Volume Down, but nothing happens and the phone reboots normally.
I also tried to press Power + Volupe Up, but it goes into the recovery.
Can somebody help me please?
andreags4 said:
Hi there,
I have a Honor 6 H60-L04 B371 and I can't boot the phone in FastBoot.
I read online that I have to press Power + Volume Down, but nothing happens and the phone reboots normally.
I also tried to press Power + Volupe Up, but it goes into the recovery.
Can somebody help me please?
Click to expand...
Click to collapse
hi . power off your phnoe . press volume down( keep it ) and then connect your usb cable ( from your computer )
andreags4 said:
Hi there,
I have a Honor 6 H60-L04 B371 and I can't boot the phone in FastBoot.
I read online that I have to press Power + Volume Down, but nothing happens and the phone reboots normally.
I also tried to press Power + Volupe Up, but it goes into the recovery.
Can somebody help me please?
Click to expand...
Click to collapse
Hi mate,
first you need to turn off your phone then connect your usb cable from pc to your device and simonteniusly hold "volume down" key about few seconds and thats it, your device should boot into fastboot / bootloader mode
Thank you guys!
Now can you see my second post please?
I don't know how to relock the bootloader :/
http://forum.xda-developers.com/honor-6/help/how-relock-bootloader-honor-6-t3303817
@andreags4:
That should work with [Honor6] HONOR MultiTool
Just look for it here > xda-developers > Huawei Honor 6, Honor 6x > Honor 6, 6x General > [Honor6] HONOR MultiTool by VirusPlus:
Attention: Before you RELOCK Bootloader you need to restore the device's
software to official version using 3 buttons flash method.
Hi guys! Thanks for read me!
My phone is dead after trying to downgrade with the huawei rollback file, I connect it to the charger and it shows me a red circle with a ray inside, a few seconds later the same circle but green and automatically turns on and stays on the logo , If I disconnect the charger it will turn off after seconds, if I keep the charger connected to the cell phone and I left pressed the power button pressed for 10 seconds the cell phone will turn itself off and it will only turn on again.
I tried the dload, but I do not get the cell to reinstall because it turns on by itself and I press the Vol + Vol - and Power keys, but nothing happens, it does not go into eRecovery, I'm new to the huawei ...
Can anybody help me?
Huawei Honor 8
Version: FRD-L04
Regards
extract the rollback package,copy the UPDATE.app which you extracted earlier, to dload(create this folder in sd card)
power off your device and press all the three buttons