Apparently all the methods of rooting this phone are for 5.0.1, ZV7/ZV8s. I can't find a single working method of rooting this... and of course without root, getting this to work on GSM is impossible.
agggh
I have the same problem, you have found some method for root lg g flex 2 LS996ZVB ?????,
there's a way
but we need the files reuploaded. seems people here https://forum.xda-developers.com/g-flex2/general/to-dd-command-to-root-ls996vzb-t3390502 were able to get it working with the rooted zvb system.img
Flash rooted zvb tot with lgup for root on stock sprint ls996zvb
ZVB Rooted system.img file (NOT a TOT file)
https://mega.nz/#!HcQDFYRR!8-guHSiPBToBeinQhz2xEZAYak9p7SBe7brvnieI_LI
no more dd commands needed just flash this tot unlocked rooted apn fixed
hit thanks button
https://forum.xda-developers.com/g-flex2/general/guide-sim-unlock-t3637336
Related
I've seen the low-effort root instructions for the G4 running 10G. I have an AT&T (H810) G4 running 10I. Is it possible for me to root at this point, or is it still being developed? Is there a way to roll back to 10G so I can use the low-effort method?
http://forum.xda-developers.com/showpost.php?p=62664473&postcount=35
Next time search around a little..
I downloaded the .img file from the link you mentioned now how do I flash it. All the methods i've found for flashng .img files require root already or are specific to older build numbers. Any help will be greatly appreciated.
Download rasher app from play store n flash .img
Thanks for the reply. Rasher says it requires root. This .img is to gain root aaccess and is currently the only root option. I'll try rasher when i get home but im not hopeful. What would be the common method to flash this .img to an unrooted stock LG G4 with h81010i firmware. Thanks.
Rasher was a fail. How do people normally install a .img file?
I hard bricked my AT&T G3 and I'm trying to recover it following the guide located at: http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 but I need the stock lollipop TOT file. Can any of you point me to it?
I was able to solve this one following the instructions with a Kit Kat TOT image.
You can visit this site and can download the stock 4.4.2 TOT
http://lgg3root.com/lg-g3-stock-factory-firmware/
Hit thanks if it helped.
BTW.how did you hard bricked your mobile? because i am new to lg g3 d850(at&t) unlocked. i am running on stock kitkat and want to install official lollipop. please tell me what i Shouldn't do to hardbrick the mobile. my phone is 2 days old.
Tot back kitkat the let system do its updates thwn root
Hi I have a LG G Flex 2 LS996 sprint edition. It's running on firmware ZV9. I rooted it with the rooted system img. I kept the image inside my phone. Then I installed xposed and the flash mods. However, I wanted to revert to the stock rooted image, so I flashed the rooted image from download mode. The phone booted normally, and it got to optimizing apps. It finished, and it got to the lockscreen. It said systemui has stopped working. I press okay and then the entire screen went dark with only the wallpaper flashing every few seconds. At this point I'm not sure what to do. I'm afraid I might brick it because it has locked bootloader. Can someone please help?
Enter to download mode and flash latest stock rom from LG for your version. Not rooted image but stock image, and format your phone memory when flashing stock rom to be sure.
I have H955 and I use lg flash tool with stock kdz files from LG.
Sent from my LG-H955 using Tapatalk
Okay so I did a factory reset and I had to setup everything again, however, my phone works. Now i want to find a way to completely reset everything to complete stock. The problem is that the latest TOT available for the LS996 Is the ZV8 but I'm currently running ZV9 so I'm scared that if I flashed ZV8 over ZV9 my phone will brick.
hello i have lg flex 2 sprint it was on 5.0.1 ZV4 i just tried to root it by flash ZV6 root system through dd command
after flash the rootsystem image the phone reboot to lg logo with security error then it go down and black screen i still can enter download mode..
please any body can help me to restore stock rom maybe im on zv6 rooted system
I've never even heard of a ZV4 for the Flex 2, I thought we started with ZV5 originally when the phone was released in mid-2015, guess I just missed that one entirely if it does exist.
If you can enter download mode (you said you can) then I strongly suggest you flash the ZV8 TOT file found in the link provided in this instructional post:
http://forum.xda-developers.com/g-flex2/general/guide-lg-g-flex-2-stock-firmware-to-t3037593
Since we don't have a KDZ or TOT for ZV9 or even the latest ZVB firmware you have to flash those manually (not using the LG Flash Tool but the Send_Command.exe thing along with dd while the system img file is on the internal storage of the device.
I guess my one question would be: why haven't you updated when new firmware has become available, or did you just get this Flex 2 recently and it had ZV4 on it and you just never bothered.
If you do this right you can get everything working in under 30 minutes, and have even rooted ZVB ready to go (there's a rooted ZVB system img available now too, search the threads and you'll find the link to download it).
Be careful, read all the instructions, take your time, and good luck.
thank you very much for your help but I want tell you that I cant get the storage because the phone cant startup it just bootloop on security error so I cant put anything on the storage how I can transfer the file to storage
or can I flash it through lg flash tool?
I bought this phone from ebay and it come with zv4 I think who has it didn't do any updates
Hello guys 2 days ago i root my phone with easyroot and then i flash g4 mode with flashfire. I got brick (SECURITY ERROR ) authentication 9. Anyway i tried to flash stock rom with kdz file but nothing always stuck at 9%. Only one way left to save my phone i guess. I must install with tot file but i cant find for H955. Can i install H950 tot file on my h955 ?
Thanks for reading