hi everbody,
im a kind of lost for this one, i asked earlier if the LG-D850 roms was compatible for the LG-D852 and a user says me yes. so after flasing a D852 recovery and flashed a D850 rom, i am right now stuck in fastboot mode. I been able to go to download mode but I cant flash the D852 stock factory image with the lg flashtool because my phone thinks he a D850 device. So what should I do for this one ? flash a att stock factory image with the flashtool or that move will screw up my device for good ? Any ideas to get back my original model number ?:crying:
thanks for your reading and happy holidays
Ok, so I just started to dig into my g2 today and decided to root it and such with hopes of trying out the resurrection remix rom. I followed this http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951 to root my stock D801 running 4.4.2 and it worked perfectly fine verified with the root checker app. I went on to install TWRP following this http://forum.xda-developers.com/tmo...l-one-click-freedom-tool-lp-30b-twrp-t3084474 which also worked fine so i booted into TWRP. First and only thing i did was create a backup. After the backup was done i rebooted and now I'm stuck with a repeating lg logo boot loop. I can still get into TWRP, and I can get into download mode so I'm not too worried. I tried restoring from the backup I made right before the bootloop started but it didn't work.
My question is what did I do wrong? Also, instead of going back to stock, could I just load resurrection remix onto the phone now and try to flash it even though its boot looping?
ravensfan8448 said:
Ok, so I just started to dig into my g2 today and decided to root it and such with hopes of trying out the resurrection remix rom. I followed this http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951 to root my stock D801 running 4.4.2 and it worked perfectly fine verified with the root checker app. I went on to install TWRP following this http://forum.xda-developers.com/tmo...l-one-click-freedom-tool-lp-30b-twrp-t3084474 which also worked fine so i booted into TWRP. First and only thing i did was create a backup. After the backup was done i rebooted and now I'm stuck with a repeating lg logo boot loop. I can still get into TWRP, and I can get into download mode so I'm not too worried. I tried restoring from the backup I made right before the bootloop started but it didn't work.
My question is what did I do wrong? Also, instead of going back to stock, could I just load resurrection remix onto the phone now and try to flash it even though its boot looping?
Click to expand...
Click to collapse
Did you actually ever upgrade to lollipop?
If not try flashing the 20g bootstack that can be found in the stock 30b roms by micromod...after that you should be able to restore your backup...
jamesd1085 said:
Did you actually ever upgrade to lollipop?
If not try flashing the 20g bootstack that can be found in the stock 30b roms by micromod...after that you should be able to restore your backup...
Click to expand...
Click to collapse
I did not. I was running on 4.4.2. I have since used the lg 2014 flash tool to flash the stock lollipop firmware, and subsequently followed the same process i mentioned above to root and get twrp installed. Now I have everything running alright, and a stable backup, but im running into issues flashing resurrection remix. I tried both the latest version on 5.1, and the newest version for 5.0.2. I first do a factory rest wipe on twrp, then i flash resurrection and the appropriate gapps ( 5.0 for the 5.02 rom and 5.1 for the newest one) both times i just get the lg logo after reboot. the logo stays for about 2 minutes until the screen starts to flicker and fade to grey. then i have to go back to twrp and restore.
ravensfan8448 said:
I did not. I was running on 4.4.2. I have since used the lg 2014 flash tool to flash the stock lollipop firmware, and subsequently followed the same process i mentioned above to root and get twrp installed. Now I have everything running alright, and a stable backup, but im running into issues flashing resurrection remix. I tried both the latest version on 5.1, and the newest version for 5.0.2. I first do a factory rest wipe on twrp, then i flash resurrection and the appropriate gapps ( 5.0 for the 5.02 rom and 5.1 for the newest one) both times i just get the lg logo after reboot. the logo stays for about 2 minutes until the screen starts to flicker and fade to grey. then i have to go back to twrp and restore.
Click to expand...
Click to collapse
RR is kit kat based and you will need to flash the 20g bootstack i mentioned and also the jb bootloader by blastagator...then you will be able to flash RR...to return to lollipop you will need to flash the 30b bootstack before restoring...30 bootstack can be found in same thread as the 20g...good luck
jamesd1085 said:
RR is kit kat based and you will need to flash the 20g bootstack i mentioned and also the jb bootloader by blastagator...then you will be able to flash RR...to return to lollipop you will need to flash the 30b bootstack before restoring...30 bootstack can be found in same thread as the 20g...good luck
Click to expand...
Click to collapse
Thanks! I'm not really sure what a bootstack is, so i guess i have a bit to learn, i will go and look up the 20g bootstack and see whats involved with it.
ravensfan8448 said:
Thanks! I'm not really sure what a bootstack is, so i guess i have a bit to learn, i will go and look up the 20g bootstack and see whats involved with it.
Click to expand...
Click to collapse
Both files can be found here http://forum.xda-developers.com/tmo...-tmo-g2-lollipop-30b-stock-rom-t3084687...for 30b bootstack though grab the one i linked in post 13 as the one in op breaks download mode so i fixed it in linked one the 20g one is fine i believe
jamesd1085 said:
Both files can be found here http://forum.xda-developers.com/tmo...-tmo-g2-lollipop-30b-stock-rom-t3084687...for 30b bootstack though grab the one i linked in post 13 as the one in op breaks download mode so i fixed it in linked one the 20g one is fine i believe
Click to expand...
Click to collapse
I wish I could hit the thanks button more than once, you are awesome. Everything is up and running smoothly now. I don't think I would have ever figured out that a lollipop rom needed a kit kat bootstack and a jellybean bootloader to run properly. I don't even know how I'd go about finding that out. Thanks again.
ravensfan8448 said:
I wish I could hit the thanks button more than once, you are awesome. Everything is up and running smoothly now. I don't think I would have ever figured out that a lollipop rom needed a kit kat bootstack and a jellybean bootloader to run properly. I don't even know how I'd go about finding that out. Thanks again.
Click to expand...
Click to collapse
No problem...by the way is download mode working after flashing 20g bootstack?...if not let me know as i made a modified version to fix but i haven't tested it yet...should work
maybe your problem is fixed by now, but did you try wiping cache/dalvik cache? That fixes 90% of bootloop problems for me.
So I rooted my moto g XT1032 a while back. I didn't brick my phone and managed to install cyanogen mod 11 on it. after a while I decided that I wanted to go back to my original software. I poked around and found the closest one to my phone, the US retail XT1032. When I flashed that my phone was stuck in a bootloop until the battery died. Luckily I can still get the phone into bootloader and recovery modes. Now heres the problem. The stock firmware my phone runs is the Canadian XT1032 on Telus. Cant exactly find it. Does anyone know how I can fix this and if I cannot find the stock firmware for my version of the phone whats my best option?
*EDIT* Ok, so I wiped the dalvik cache using TWRP and my phone is no longer in a boot loop. But now how would I uninstall cyanogen mod 11 and get my device back to stock?
Check the link below and see if they have your devices firmware. If so, just re-flash the firmware.
motofirmware.center
Sent from my XT1031™
I have a D800, recently unbricked by shorting pins, and i have managed to install TWRP and download mode is working. I can't run any rom. I need to flash a KDZ through download mode.
But all the KDZ are of 10a/10b etc , does any body know where I can find a 30x KDZ or how to upgrade without flashing numerous FOTAs?
or will my phone boot up if i install http://forum.xda-developers.com/devdb/project/dl/?id=13450? i think not, but still need to know.
ipatel said:
I have a D800, recently unbricked by shorting pins, and i have managed to install TWRP and download mode is working. I can't run any rom. I need to flash a KDZ through download mode.
But all the KDZ are of 10a/10b etc , does any body know where I can find a 30x KDZ or how to upgrade without flashing numerous FOTAs?
or will my phone boot up if i install http://forum.xda-developers.com/devdb/project/dl/?id=13450? i think not, but still need to know.
Click to expand...
Click to collapse
The AT&T D800 uses a TOT file to flash back to stock. Are you in the right section? If you have a D800 you can use this to go back to KK and it's just one FOTA thru AT&T to go to LP. http://forum.xda-developers.com/showthread.php?t=2663369
hello i have lg flex 2 sprint it was on 5.0.1 ZV4 i just tried to root it by flash ZV6 root system through dd command
after flash the rootsystem image the phone reboot to lg logo with security error then it go down and black screen i still can enter download mode..
please any body can help me to restore stock rom maybe im on zv6 rooted system
I've never even heard of a ZV4 for the Flex 2, I thought we started with ZV5 originally when the phone was released in mid-2015, guess I just missed that one entirely if it does exist.
If you can enter download mode (you said you can) then I strongly suggest you flash the ZV8 TOT file found in the link provided in this instructional post:
http://forum.xda-developers.com/g-flex2/general/guide-lg-g-flex-2-stock-firmware-to-t3037593
Since we don't have a KDZ or TOT for ZV9 or even the latest ZVB firmware you have to flash those manually (not using the LG Flash Tool but the Send_Command.exe thing along with dd while the system img file is on the internal storage of the device.
I guess my one question would be: why haven't you updated when new firmware has become available, or did you just get this Flex 2 recently and it had ZV4 on it and you just never bothered.
If you do this right you can get everything working in under 30 minutes, and have even rooted ZVB ready to go (there's a rooted ZVB system img available now too, search the threads and you'll find the link to download it).
Be careful, read all the instructions, take your time, and good luck.
thank you very much for your help but I want tell you that I cant get the storage because the phone cant startup it just bootloop on security error so I cant put anything on the storage how I can transfer the file to storage
or can I flash it through lg flash tool?
I bought this phone from ebay and it come with zv4 I think who has it didn't do any updates