I am not able to connect the Fossil Q Founder 2.0 (Android Wear 2.0) to the Sony XZ Dual Nougat.
I know, that this is a known Nougat problem.
I tried cleaning cache and many other things, that a found on web.
Is there a solution for this problem? Or is the only solution downgrade or waiting for 7.1.1?
I had many troubles to connect to my G Watch R and my Sony SWR50. My last try was to install an previous version of the Android Wear App ( in my case V1.3 does it ). After that, i was able to pair and connect my devices. Playstore updateted the App, all was ok then.
meckipower said:
I had many troubles to connect to my G Watch R and my Sony SWR50. My last try was to install an previous version of the Android Wear App ( in my case V1.3 does it ). After that, i was able to pair and connect my devices. Playstore updateted the App, all was ok then.
Click to expand...
Click to collapse
Perfect! This works. But I had to take the V1.3. V1.4 and V1.5 crashed on Android 7.0. Thank you so much.
erypo2000 said:
I am not able to connect the Fossil Q Founder 2.0 (Android Wear 2.0) to the Sony XZ Dual Nougat.
I know, that this is a known Nougat problem.
I tried cleaning cache and many other things, that a found on web.
Is there a solution for this problem? Or is the only solution downgrade or waiting for 7.1.1?
Click to expand...
Click to collapse
I dont have a single issue on my lg g watch r(nougat 7.1.1 firmware wear 2.0)... Its connected to xperia XZ(nougat 7.0) and working like a charm and also i can connect any bluetooth device without a problem...Maybe restoring it would help solving those issues or flashing a different region firmware...U can try and see . It makes wonders sometimes ....Also u can try downgrading both devices to android 6.0 and then upgrade the phone first to nougat firmware and then connect the wear to it and at the end update the watch to nougat and it should work. :fingers-crossed:
Related
Hi there, I'm new here so bear with me if I make any mistakes. So I have installed OTA Marshmallow update on my Honor 6 few days back. Now it only works when it's connected to a power source. When I remove the charger, I can just make calls, if I try to open anything, the phone just shuts down and doesn't power on unless connected to charger.
I want to downgrade to previous version Lollipop. Any guide on how to do it?
Specs:
Honor 6 H60- L04
Build: H60- L04C675B831
Android Version: 6.0
EMUI 4.0
Thanks for any help.
steve-kon said:
Hi there, I'm new here so bear with me if I make any mistakes. So I have installed OTA Marshmallow update on my Honor 6 few days back. Now it only works when it's connected to a power source. When I remove the charger, I can just make calls, if I try to open anything, the phone just shuts down and doesn't power on unless connected to charger.
I want to downgrade to previous version Lollipop. Any guide on how to do it?
Specs:
Honor 6 H60- L04
Build: H60- L04C675B831
Android Version: 6.0
EMUI 4.0
Thanks for any help.
Click to expand...
Click to collapse
I am having the same build version and iam not facing any of the above problems,better check phone hardware
akhilsofficial said:
I am having the same build version and iam not facing any of the above problems,better check phone hardware
Click to expand...
Click to collapse
It only happened on a few devices, i saw a post in another forum with the same problem.
No problem with phone hardware too, it was running smoothly until I upgraded and everything gone to waste. SO I just want to roll back to L.
Can someone at least tell me what does a UPDATE.APP contain.?
I had same problem and it was problem with battery. With new battery works all well.
Odesláno z mého H60-L02 pomocí Tapatalk
I have a HTC 10 (Nougat) with the Gear APP installed and try to connect with my new Gear S3.
But it always fails.
The app will not connect to the watch.
In bluetooth (HTC 10) I can see the watch an it is connected.
I hape that anyone can help me connecting the watch.
rogermiet said:
I have a HTC 10 (Nougat) with the Gear APP installed and try to connect with my new Gear S3.
But it always fails.
The app will not connect to the watch.
In bluetooth (HTC 10) I can see the watch an it is connected.
I hape that anyone can help me connecting the watch.
Click to expand...
Click to collapse
There is a problem with 7.0
dtosun said:
There is a problem with 7.0
Click to expand...
Click to collapse
Is there any solution for this??
i can connect on htc 10 nougat
but if you are on a custom rom then no
SovPanda said:
i can connect on htc 10 nougat
but if you are on a custom rom then no
Click to expand...
Click to collapse
What effect this? Yes i have xiaomi.eu custom rom.
But my android 6.0 was same custom rom and it was working well.
Why are you surprised?
There is no general nougat problem, no matter how many times you repeat it
And this has already been analyzed
https://forum.xda-developers.com/showpost.php?p=70233650&postcount=78
The only question is how to solve the issue, which can affect all android-versions
https://forum.xda-developers.com/gear-s3/help/gear-s3-miui-t3527513
Hello everybody. Sorry for my English. I need do a system ip cameras in my home because my housemaid is stealing me. So. Im using different moto g : 2 moto g(2013) 1 moto g(2014) and 2 moto g (2015).
I could use all phone successfuly but Im having problems with a moto g 2015 (I don't tried with the other 2015 still). I need used the phone with out case and screen. And with this model I can't start with out screen. And them, when I connect it, it start with the wiif turns off. When I turn on the phone is restarting constantly.
My system is that I control the phone with out screen with airdroid, and I power it with a 12v of the alarm wires. So, what I can do? It is possible with I change the kernel or the room? (I don't have any problem with the moto g1 and 2)
I changed the rom to lineage os and it improve. The wifi don't turn off, and I connect with it with airdroid for few minutes. But them it start to restart. I don't know for what is it.
Pisckuy said:
I changed the rom to lineage os and it improve. The wifi don't turn off, and I connect with it with airdroid for few minutes. But them it start to restart. I don't know for what is it.
Click to expand...
Click to collapse
See if one of the roms on this thread help,
https://forum.xda-developers.com/2015-moto-g/general/favourite-g3-osprey-2015-roms-android-t4081375
R1ffR4ff said:
See if one of the roms on this thread help,
https://forum.xda-developers.com/2015-moto-g/general/favourite-g3-osprey-2015-roms-android-t4081375
Click to expand...
Click to collapse
Hello. I can solve it for now. I downgrade the phone to 5.1.1 and it worket. I don know why sometimes the phone turn on with wifi off. So you know if I can lock it with adb or root?
Pisckuy said:
Hello. I can solve it for now. I downgrade the phone to 5.1.1 and it worket. I don know why sometimes the phone turn on with wifi off. So you know if I can lock it with adb or root?
Click to expand...
Click to collapse
I don't know of you can lock it
Have you tried one of the CHIL360 roms?
AOSP Pizza Android 9 latest version works well for me.
R1ffR4ff said:
I don't know of you can lock it
Have you tried one of the CHIL360 roms?
AOSP Pizza Android 9 latest version works well for me.
Click to expand...
Click to collapse
I'm trying with cyanogenmod 12 and it's fine for now. Thanks you. CHIL360 is more stable that cm 12?
Pisckuy said:
I'm trying with cyanogenmod 12 and it's fine for now. Thanks you. CHIL360 is more stable that cm 12?
Click to expand...
Click to collapse
I can't say about pre PIE versions as I didn't bother with any custom roms until Android Pie on these phones as I got my Moto G3 in 2018 as a cheap Spare phone.
If you see my other thread/post I'm running 3 different CHIL360 roms and they all work fine on my ARM<32 bit>(not 64 bit) 1 gig Ram XT1541.
Latest Lineage 10 works fine with up-to-date security patches
Latest AOSP Pizza Android 9 works fine(April 2020 Security updates). I'm back using it for now as I get bored<grin>
And Havoc Android 10 3.4 but not the latest 3.5 as the FM radio doesn't work
R1ffR4ff said:
I don't know of you can lock it
Have you tried one of the CHIL360 roms?
AOSP Pizza Android 9 latest version works well for me.
Click to expand...
Click to collapse
R1ffR4ff said:
I can't say about pre PIE versions as I didn't bother with any custom roms until Android Pie on these phones as I got my Moto G3 in 2018 as a cheap Spare phone.
If you see my other thread/post I'm running 3 different CHIL360 roms and they all work fine on my ARM<32 bit>(not 64 bit) 1 gig Ram XT1541.
Latest Lineage 10 works fine with up-to-date security patches
Latest AOSP Pizza Android 9 works fine(April 2020 Security updates). I'm back using it for now as I get bored<grin>
And Havoc Android 10 3.4 but not the latest 3.5 as the FM radio doesn't work
Click to expand...
Click to collapse
Thank you, but I need android 5.1.1 becose in the up versions it start to restart.
Hi guys.
New to this forum.
Been searching through the threads but really struggling to work this out.
I bought this phone because it was great for COD mobile. Worked perfectly with my dualshock 4 controller now after the latest 11 update the buttons are messed up. Figured Sony would have fixed this considering they sell the phone with advertising specifically for this gane, oh and they make the controller as well! Madness!
Anyway I've tried using newflasher to get back to the last 10 update but with no luck. Presumably because of the rollback protection in 11. I did manage it once but that was on the first update this new one just won't do it.
Is there anyway of maybe wiping the OS and flashing a new clean install of android 10?
Worried about rooting because I don't really want to lose my warranty or any features (or screw the phone up) Don't think it's possible without doing that but would be grateful for any advice anyone can offer!
Thanks
Hey I go back from 11 to 10 with this rom:
Sony Xperia 5 II | XperiaFirmware.com
xperiafirmware.com
I have used newflasher and IT worked.
Bellitsch89 said:
Hey I go back from 11 to 10 with this rom:
Sony Xperia 5 II | XperiaFirmware.com
xperiafirmware.com
I have used newflasher and IT worked.
Click to expand...
Click to collapse
Thanks for the info.
I tried quite a few times but it wouldnt go back for some reason. It did work from the first A11 update but once you update to the latest one you cant go back at all.
Luckily it looks like they've worked the problem out between themselves and controller now works with COD and better than before!
samdnb said:
Thanks for the info.
I tried quite a few times but it wouldnt go back for some reason. It did work from the first A11 update but once you update to the latest one you cant go back at all.
Luckily it looks like they've worked the problem out between themselves and controller now works with COD and better than before!
Click to expand...
Click to collapse
Oh OK. That is a big Problem. I used IT with the first android 11 Update...
Thank you Bellitsch89. Got a bootloop with Magisk and 58.1.A.5.330. Installed Android 10, and Magisk works.
Bellitsch89 said:
Hey I go back from 11 to 10 with this rom:
Sony Xperia 5 II | XperiaFirmware.com
xperiafirmware.com
I have used newflasher and IT worked.
Click to expand...
Click to collapse
You made my day! Yesterday I bought this nice piece of Hardware and spent around 12 hours (reading almost all tutorials in the whole internet) to install Magisk on a XQ52-AS52 58.1.A.5.330 (Android 11). No chance at all.
After downgrading to 58.0.A.28.51 it works very well. Thank you a lot!
Will the firmware on the link work on a XQ-AS62? I have been looking to downgrade from Android 12 to Android 10. Thanks!
Hey all,
I have just bought an audi that comes with the android tablets for the kids in the back seat. They are running android 4.4.2 and no OTA updates are available to it. Due to its old OS, im having problems getting things like bluetooth controllers and even the play store to work correctly (intermittent downloads stuck on pending forever / stalling).
I have seen other tablets of the same variety running android 7 but cannot find the software anywhere on the internet to update to the custom build for these head units.
Can anyone help me figure out how to make this tablet a little more usable in 2023?
Thanks
Request the matching Android 7+ from OEM.
I have emailed the maker of the device, JET OPTO via their website but they havn't responded.
Does anyone know if rooting and custom rom would work on this - retaining its function with hdmi in etc?
I was thinking, another way around it is to use a ?firestick and miracast a phone?
Android 4.4.2 easily get rooted via so-called one-click-tools, i.e.
How to Root Android 4.4 (4.4.2 & 4.4.4) | KingoRoot
Here is how to root android 4.4, including 4.4.2 and 4.4.4, with KingoRoot Android in just one click.
www.kingoapp.com
Hi
Same here. I cant find any info about update. There are some info that ppl have android 7 but no info how to do it. On audiworld someone did it by audi service. Ive made couple phones to service and no1 could tell me how tu update. Ive read somewher that rooting RSE III is very risky, it can freeze, then y can do nothing. In service the told me that they can change my old RSE to newer (silver one) cost is big. I dony want to risk that in couple years problem with update will be thisome. I think best way is to buy normal tablets andro or ios.
I can confirm taht you can update to oem audi android 7, already did it.
Hi, do you have the audi oem look files to update it?
I'm looking for the Android 7 update files for an RSEIII currently running on 4.4.2 as well.
Any news on this? I'm also looking for the update.
Kirylpl said:
I can confirm taht you can update to oem audi android 7, already did it.
Click to expand...
Click to collapse
Do you have the update files?
Would be great if you could share them.
dahouselover03 said:
Do you have the update files?
Would be great if you could share them.
Click to expand...
Click to collapse
Same issue here, Audi RSEIII looking for updating to Android 7.0, so it can work properly.
@dahouselover03 @Fadjskl