Hi guys,
Where can I find the Experimental build of LineageOS so that I can dirty flash?
Regards,
Serg
I have a copy on my hard drive. Just uploaded it to Google Drive:
https://drive.google.com/file/d/0B4u2C-3WWJzsdHVlN3dIQnBoMGM/view?usp=sharing
mrmathematica said:
I have a copy on my hard drive. Just uploaded it to Google Drive:
https://drive.google.com/file/d/0B4u2C-3WWJzsdHVlN3dIQnBoMGM/view?usp=sharing
Click to expand...
Click to collapse
THANk YOU!!!
this experimental build can't flash to my bacon
Related
Done here we have official now
THREAD CLOSED by OP
And thank you
Reserved
Changelog :
20170202 :
- 5.8.1 Released
- Add support OMS
- Ambient display
- Add radio Option
Screenshoot :
bugerxXx said:
Reserved
Click to expand...
Click to collapse
2 RR roms.... Great ss please?
Yeah source build again :v
With F2FS too, this is great dude
But, i still on LOS by har****. Will try this tomorrow.
mayu19 said:
2 RR roms.... Great ss please?
Click to expand...
Click to collapse
Can be added, wait
Source build??F2FS?Bugs?
JovanSijacki said:
Source build??F2FS?Bugs?
Click to expand...
Click to collapse
Source build, yes f2fs support, bug, please tell me if find
bugerxXx said:
Source build, yes f2fs support, bug, please tell me if find
Click to expand...
Click to collapse
Nice thanks will try soon and report if i find something
Niceee budyy
Try it tomorrow:good:
Can't we flash gapps right after ROM without reboot in between them?
sid1996 said:
Can't we flash gapps right after ROM without reboot in between them?
Click to expand...
Click to collapse
you can, but if you have 2 simcard, setup wizard can be stuck, causes internet must be selected in settings
I tried this. But play store and play services are missing in this. I flashed 7.1 /micro gapps dated 28/01/2017 build. Even though no playstore. What to do....
What is dis error...! Is it important
New OpenGAPPS does not install correctly. I installed that from 30.10.2016. and I have Play Service crashes.
What about DynamicGAPPS. Anyone has installed?
wujke said:
New OpenGAPPS does not install correctly. I installed that from 30.10.2016. and I have Play Service crashes.
What about DynamicGAPPS. Anyone has installed?
Click to expand...
Click to collapse
I have old gapps, but that was stock gapps. While flashing that one, it says no space. So install aborted.
wujke said:
New OpenGAPPS does not install correctly. I installed that from 30.10.2016. and I have Play Service crashes.
What about DynamicGAPPS. Anyone has installed?
Click to expand...
Click to collapse
Try to dynamic gapps, or use old gapps from my cm-14 thread
rule breaker sarath said:
I have old gapps, but that was stock gapps. While flashing that one, it says no space. So install aborted.
Click to expand...
Click to collapse
Have you try with my build twrp ?
Ohh for system, after flash you can resize file system, the system is just 990Mb after resize system can be normal and log cannot space been fixed
bugerxXx said:
Have you try with my build twrp ?
Ohh for system, after flash you can resize file system, the system is just 990Mb after resize system can be normal and log cannot space been fixed
Click to expand...
Click to collapse
I tried in latest twrp. Not urs... I will check it out
Dynamic gapps flashed. Play store now available..... Thnxxxxx
bugerxXx said:
Have you try with my build twrp ?
Ohh for system, after flash you can resize file system, the system is just 990Mb after resize system can be normal and log cannot space been fixed
Click to expand...
Click to collapse
How much free RAM available?
Hello All,
I am trying to build Nitrogen OS for Pixel 2 (aka Walleye).
I cloned Nitrogen OS and then forked device, vendor, and kernel trees from AICP as they already have working builds for walleye.
On compiling , I am getting an error.
Code:
external/tinycompress/Android.mk: error: cplay (native:platform) should not link to libtinycompress_vendor (native:vendor)
pastebin :- https://pastebin.com/zEUE9wua
any help in fixing the error would be appreciated.
Fix :- Apply this patch - https://github.com/halogenOS/androi...mmit/8a56c183d5887e3c9e2cab45349ddf5e7285b49f
Source for device, kernel and vendor
https://github.com/munchycool?tab=repositories
All repos except "fortheluluz" are needed for walleye.
Nitrogen OS Source :-
https://github.com/nitrogen-project
Do note, you will have to delete below folder once you sync nitrogen os, else compile will throw an error.
Code:
hardware/qcom/msm8998/gpt-utils
Thanks.
reserved
reserved 002
reserved 003
Have you been on the telegram chat for Pixel 2 that had Nitrogen builds for other devices? Might find hello there.
razrlover said:
Have you been on the telegram chat for Pixel 2 that had Nitrogen builds for other devices? Might find hello there.
Click to expand...
Click to collapse
yes sir, on that group and got the answer. updated OP.
munchy_cool said:
yes sir, on that group and got the answer. updated OP.
Click to expand...
Click to collapse
Share your build sir?
razrlover said:
Share your build sir?
Click to expand...
Click to collapse
dont have one right now.
got another error
munchy_cool said:
dont have one right now.
got another error
Click to expand...
Click to collapse
Ok cool. Hopefully it will get sorted
munchy_cool said:
Source for device, kernel and vendor
https://github.com/munchycool?tab=repositories
All repos except "fortheluluz" are needed for walleye.
Click to expand...
Click to collapse
Could I use these to attempt building other ROMs? For instance I'm interested in making my own personal DU build.
TCUofficial said:
Could I use these to attempt building other ROMs? For instance I'm interested in making my own personal DU build.
Click to expand...
Click to collapse
havent got a bootable build yet with those repos. you are free to use them, but i would rather not at this time as they are not working for me.
What is TWRP
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system which are functions often unsupported by stock recovery images. It is, therefore, often installed when flashing, installing, or rooting Android devices, although it isn't dependent on a device being rooted prior to installation.
Click to expand...
Click to collapse
About this build
Clean TWRP 3.3.1-2, without any tweaks and modifications. Fixed a lot of bugs in official build like 9th FW, MTP, DT2W, F2FS, Sideload.
Click to expand...
Click to collapse
Information
TWRP Version: 3.3.1-3
Build Date: 27-06-2019
Host: Minimal Omni 9.0
Click to expand...
Click to collapse
Downloads
Recovery page with all builds:
https://www.mcsm.ml/html/twrp.html
Click to expand...
Click to collapse
Source
Device Tree: https://github.com/MyCats/recovery_device_xiaomi_whyred
Minimal Omni Manifest: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-9.0
Click to expand...
Click to collapse
is f2fs formatting working?
Nuclearom
will you build the nuclea rom for whyred?
SyeedAhmed said:
is f2fs formatting working?
Click to expand...
Click to collapse
Yes, https://github.com/GuaiYiHu/android...mmit/36118d354638645c9c3cb0753ee064fadc2401fa
kuahongolongol said:
will you build the nuclea rom for whyred?
Click to expand...
Click to collapse
NucleaRom project was freezed (or, maybe, abandoned), so there is a lot of building errors.
I'll try to rebuild it after building CarbonROM and LineageOS update
MyCats said:
Yes, https://github.com/GuaiYiHu/android...mmit/36118d354638645c9c3cb0753ee064fadc2401fa
NucleaRom project was freezed (or, maybe, abandoned), so there is a lot of building errors.
I'll try to rebuild it after building CarbonROM and LineageOS update
Click to expand...
Click to collapse
What about omni rom bro. No one maintaining it at the moment.
niyas90 said:
What about omni rom bro. No one maintaining it at the moment.
Click to expand...
Click to collapse
I have tried to build it with official devtree and got a bootloop only. I will try to build it with PE devtree
Is this support oreo and pie fw?
it boot properly on pie fw... thank you
user64byte said:
Is this support oreo and pie fw?
Click to expand...
Click to collapse
Yes, it is universal
Can the data partition be unlocked?
zhanghg said:
Can the data partition be unlocked?
Click to expand...
Click to collapse
Yes
MyCats said:
Yes, it is universal
Click to expand...
Click to collapse
its not boot on oreo fw, i've tried it
fadhlanisatria said:
its not boot on oreo fw, i've tried it
Click to expand...
Click to collapse
Okay, use official TWRP
btw I really appreciate your work... I am not sure is dt2w is official feature of TWRP or not but can you add this or is it possible? thank you again
SyeedAhmed said:
btw I really appreciate your work... I am not sure is dt2w is official feature of TWRP or not but can you add this or is it possible? thank you again
Click to expand...
Click to collapse
+1 it's a nice feature
SyeedAhmed said:
btw I really appreciate your work... I am not sure is dt2w is official feature of TWRP or not but can you add this or is it possible? thank you again
Click to expand...
Click to collapse
It is enabled in device tree, but not working in build. TWRP don't officially support DT2W
MyCats said:
It is enabled in device tree, but not working in build. TWRP don't officially support DT2W
Click to expand...
Click to collapse
oooh ?... but thanks for the reply
SyeedAhmed said:
oooh ?... but thanks for the reply
Click to expand...
Click to collapse
Change of plans. I will try to enable it via updating prebuilt kernel from new Pie GS
I'm waiting ?
New update (21-06-2019)
- TWRP version 3.3.1-1
- Changed devtree base
- Updated prebuilt kernel binary
- Using cryptfs from hardware_qcom_open source_commonsys
- Added DT2W support
- Added keystore to default.prop
- Updated build packages
- Synced with TWRP and OmniRom sources
Hi!
Can someone help me, share a download link of DU rom sunfish.Link in the thread not working.
Thank for all!
Sorry, my translation is poor, I'm using Google Translate
I'm not sure what you want?
Just google "pixel factory image" or "pixel ota image" depending on which format you need?
a1291762 said:
I'm not sure what you want?
Just google "pixel factory image" or "pixel ota image" depending on which format you need?
Click to expand...
Click to collapse
He means Dirty Unicorns I think.
@0967894983 Dirty Unicorns was discontinued back in March.
daemonspudguy said:
He means Dirty Unicorns I think.
@0967894983 Dirty Unicorns was discontinued back in March.
Click to expand...
Click to collapse
Yes I know it,i hope someone keeps them!
-
-
Thank you very much!
Is the kernel version and the security patch somehow related?
I want to add nethunter support to the kernel, which I have already successfully done on Corvus OS with android 11.
Which kernel version should I choose?
View attachment 5618085
Download Link is not working... What happened ?
Gautham369 said:
Download Link
Click to expand...
Click to collapse
Firmware by alonsoj636 on MEGA
Gautham369 said:
Download Link is not working... What happened ?
Click to expand...
Click to collapse
Use the new crDroid 7.19 from @Rajat_Prime
Release xtended-os Crdroid-a11 - xtended-os - OSDN
Release xtended-os Crdroid-a11 - xtended-os #osdn
osdn.net
That worked ! thanks man
Gautham369 said:
Download Link is not working... What happened ?
Click to expand...
Click to collapse
Updates will be rolled out after July Patch and download link will be restored
Hello
The CrDroid file isn't available for download
PaulHunterx said:
Hello
The CrDroid file isn't available for download
Click to expand...
Click to collapse
Firmware by alonsoj636 - 01