used lineage os and tried to update twrp.
device got hard bricked ie no logo no recovery no os no fastboot
Tried color OS(807MB) installing. and got blank screen
but after drivers installed device is showing as'Qualcomm HS QDloader 9008' instead of QS****BULK.
.ie device recognised by my win10 laptop.
please help me with the steps to unbrick my phone and required links
Related
Solved: See post below.
So I decided to go back to Kitkat from Lollipop. To do this I went into TWRP and restored a 38R backup I made when I first got the phone in November. TWRP did its thing and booted back into 11S 38R and it seemed to work. What then happened was that I was prompted to update to 44S so I did and the phone rebooted into TWRP. TWRP came up with some sort of screen, I can't remember what it said but the last line said something about an MD5 check not beeing needed. It then turned off and I haven't been able to get it back on. I've tried holding down the power button on its own and after around 5 seconds it vibrates but nothing happens. Also when I plug it into my PC or charger the charging light doesn't turn on.
I've tried to get into recovery and fastboot mode by holding power button+up/down volume but nothing happens on screen but I still get a vibration. However when I press volume button up+power button it seems to be recognised in Windows and it brings up the device as "QHSUSB_BULK" but that is it.
Does anyone know how to fix this?
P.S: I've got a nandroid backup + modem backup from when I first got the phone available if that helps.
I was able to fix the issue using the Oneplus Recovery tool. The issue was that the phone was not being recognised by my PC despite installing the drivers included in the recovery tool. This post in the recovery tool thread had the answers:
"I also deactivate unsigned driver installation but still same fail... I found a Qualcomm HS-USB QDLoader 9008 2.1.0.5 for Windows 7 that I used. I opened the Device Manager, I found my device named QHSUSB_BULK with an yellow triangle. I pressed udate drivers , choose from computer and installed that Qualcomm HS-USB QDLoader 9008 2.1.0.5 I donwloaded. AFTER THAT the tool found my phone and I was manage to flash ROM took me half a day. I cant have done wrong , somethnig must be wrong with the drivers in the tool for w7 64bit or something . this was the first time I have hard bricked a phone EVER and I have flashed a lot . But im glad it worked out with that Qualcomm HS-USB QDLoader 9008 driver since that guy also had same problem as me and later got it to work with that driver. Qualcomm HS-USB Drivers"
http://forum.xda-developers.com/showpost.php?p=58074662&postcount=40
So that was how I fixed it.
Why it broke in the first place is a mystery but I'm just glad to be back on Kitkat 44S.
i downgraded my moto x xt1052 from 5.1 to stock rom after that without knowing installed ota update for 4.4...that totally bricked my phone on installing update..on conneccting with pc it recognize and shows green light but the qualcom husb loader not listed in my device manager also tried installing qualcom driver stil not listed in other deives list too..without that driver cant able to debrick my phone..
is there any way to debrick my phone??
also tried http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057 this method and also tried this wire moethod too http://forum.xda-developers.com/moto-x/moto-x-qa/how-to-unbricked-hard-bricked-phone-t3146036
still my lap(using win 10 64bit) doesnt shows qusb loader..
is there any way to debrick my phone ???
why the qualcom port is not installed in device manager
Hi all,
Looked through the forum here but mine's slightly different. Installed MM ROM and tried to do factory reset. Phone booted and now stuck on "flashing" TWRP screen. Can't connect through ADB/Odin as getting msg "USB device not recognised.. device malfunction etc". Tried 4 cables and all same. I've both Samsung USB and universal ADB drivers installed on PC. Any help would be appreciated.
Thanks.
i recently tried to reflash my yuphoria with qfil but the flash process does not complete and now my yuphoria is dead. i tried to flash again but now in qfil it does not recognize port its always blank when i connect yuphoria.
So i tried to flash from my other laptop and i noticed that after installation of qualcomm drivers when i connect my phone then my laptop hangs. so i tried to do the process again from my friend laptop and its the same laptop hangs it became unstable. Somehow i managed to open qfil in laptop unstable condition it does not show port its blank.
can anyone help me to revive my fon?
Hello so my op6 got bricked and i cant log into os..so i used msm download tool went into msm mode and the phone doesnt get recognised by windows..i even changed from windows 10 to 7 but no fix..i have installed all the drives and QLoader 9008 but still get a warning on device manager that cant install device properly!pls help!thnx
https://forum.xda-developers.com/oneplus-6/how-to/guide-mega-unbrick-guide-hard-bricked-t3796051
you are using the original cable?