i recently tried to reflash my yuphoria with qfil but the flash process does not complete and now my yuphoria is dead. i tried to flash again but now in qfil it does not recognize port its always blank when i connect yuphoria.
So i tried to flash from my other laptop and i noticed that after installation of qualcomm drivers when i connect my phone then my laptop hangs. so i tried to do the process again from my friend laptop and its the same laptop hangs it became unstable. Somehow i managed to open qfil in laptop unstable condition it does not show port its blank.
can anyone help me to revive my fon?
Related
HELP NEEDED...
I Just installed a rom manager app then flash recovery thru Rom Manager..
then my phone restarted & freeze on lg logo... plz help..
The same happened to me, even when i put it to charge, it keeps rebooting (LG logo appears then reboot).
Even with the battery out, i've plugged into my USB and it keeps connecting and disconnecting. I've tried connecting it with the VOL+ pressed, it disconnects 2-3 times, and it remains connected; in Device Manager it appears as LGE Mobile USB Serial Port (COM12).
The drivers are installed; i've tried SmartFlashTool, i always get "We can't communicate with specific port"; i've tried LG Flash tool, nothing happens, it does not detect it..
Can anyome please help?
Drivers must be installed as in part 1 here
http://forum.xda-developers.com/showthread.php?t=2195753
Uninstall all LG drivers and software first, restart PC then install as explained. You must be logged onto PC as admin.
Thanks.. At step J nothing happens (everything is as it's supposed to be until here).. i'm about to give up...
In that case you may need this guide
http://forum.xda-developers.com/showthread.php?t=1942836
Or Karim Kahale's unbrick guide...
http://forum.xda-developers.com/showthread.php?t=2246001
I rooted Xperia C and installed CWM with Mobile Uncle Tools. Something went terribly wrong and since then the phone is dead. I have tried possibly all the ways on the internet to connect it to my PC (Windows 10) in download mode to use either Sony Companion or wmshua to flash the stock rom but the problem is it isn't detected. All I get under device manager is a Serial Device (COM4) under Ports even though the light is still red on the phone and another thing I have noticed is that it keeps disconnecting and connecting again and again. I have tried installing various drivers, but no luck!
Can you guys please help me out?
Anyone please?? Any suggestions??
i was flashing twrp recovery into my vivo y55l devices via qfil and i unplugged usb cable after sucess...it says reboot delay 5 seconds and after that my device is not starting up and not even recognised by pc or qfil not even any sign when connected to pc. i searched over internet and find out its hard bricked so please provide any solution for this..any helf would be appriciated
I was trying to downgrade my OnePlus Nord, So I used MSM TOOL to successfully downgrade to android 11. But when I tried to boot to fastboot, It went to EDL mode and i forgot to close MSM Tool.
At the time I unplugged the cable and tried to reboot, it wont boot and I noticed that MSM Tool tried to flash again but failed due to my foolishness..
now when I plug the cable to pc, windows says usb device is not recognized and also wont show up on msm tool now..
I have already installed Qualcom drivers as well... PLZ help as soon as possible
Thanks in advance..
Hello I have a moto edge I had havoc on there and TWRP but I don't even really know what happened but I ended up bricking well not really bricked I can get in yo fastboot but the computer doesn't recognize the device I've switched cords computers tried every driver I can find I even went as far as to make my own edl cable to try to get it to edl more which one of the times playing with the edl cable i got it to say unknown device but haven't been able to since then if i boot to recovery it boot loops and same with just trying to boot I'm at a loss of what to try to do test points? To force edl? Please help
no need for EDL mode if you can still access fastboot. you can just install the drivers.
in fastboot mode format cache partition, that will fix TWRP boot-loop.
How to do that tho ?it doesn't recognize my device at all but it recognizes any other device I plug in
in device manager find the device with yellow triangle exclamation mark
Yeah no it's not there and when I can get it to make the noise it's from my home made edl Cable it says device descriptor error or something like that I'll look to see what it comes up as but I've installed drivers of uninstalled all the drivers I've got Qualcomm drivers I've got Motorola drivers I've got I've done all that or else I would have had it solved already I don't know what's going on with it and that's why I was asking about the edl test points because the computer won't read it whatsoever now it won't even get into fastboot but it won't get into edl neither I'm lost
try in linux lsusb (no virtual machine)
I had tried on Ubuntu with no luck it doesn't do anything at all now unless I edl Cable it and it says unknown USB device device descriptor request failed
does not sound like Ubuntu error message.
No that error is from windows I do not have access to my Ubuntu atm