Related
Q&A for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
bootloop problem after flash the kernel
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?
Curiosity
This is the only android based rom that works on my hardware bricked Nexus 5 (moisture maybe); Sailfish, B2G and Ubuntu Touch works too, but the stock rom and other android based roms screen locks as soon configuration starts (usually touching in "next" after selecting language). I sense that porting the FLymeOS's app settings/configuration could reach any other rom run or something... Any ideas?
Thanks in advance, and sorry for my poor english
M_Nexus5 said:
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?
Click to expand...
Click to collapse
You should use ElementalX CM version
Vpabc said:
You should use ElementalX CM version
Click to expand...
Click to collapse
Yes that is what I used, I download it from the this thread so shoud is for CM
And also I tried with the new version 1.12, I download it from ElementalX page, the link was under the CM section ! But same problem, my device go into bootloop !
I have other question please, I changed the dpi of play store to 480 by using the Xposed module, but still I can't get some of Apps when I use the search box of play store !
Shoud change the whole dpi of system & applications or need to change another google app to solve this problem ?!
Thaaanks for helping
This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem
Vpabc said:
This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem
Click to expand...
Click to collapse
thanks, we are waiting for the next version
is there update in the soon
or developers left him ...
Flyme OS not working on my Nexus 5
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!
sp268_simple said:
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!
Click to expand...
Click to collapse
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps
ferozzzz said:
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps
Click to expand...
Click to collapse
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...
sp268_simple said:
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...
Click to expand...
Click to collapse
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)
ferozzzz said:
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)
Click to expand...
Click to collapse
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..
When update to flyme4
Problems with immersive mode on fullscreen games
Hi. I flashed Flyme OS a couple of days ago, and I have to say I am loving every single moment of this. Love the interface, love the speed and even the battery life is pretty impressive compared some other ROMS!
Although, I have been experiencing an extremely annoying bug with fullscreen games. I play COC on my phone on a daily basis and when I open the game, the onscreen buttons (Back, Home and Recent) buttons don't disappear like they are supposed to on android 4.4. They stay fixed and visible.
Now, I normally wouldn't mind this, if the full game interface is visible. The problem is that the onscreen buttons are fixed on top of the game, which means that part of the screen is hidden behind the buttons. It is really difficult. I tried a couple of stuff I found on google to fix it.
The only thing I found closest to a fix is to disable the whole onscreen buttons thingy by setting the value of "mu.hw.mainkeys" to "1" in "build.prop" file. Then I installed the "PIE CONTROL" app by "coolace" from the Playstore. It have been working really well for now. But, since it includes installing an external app, which takes up more memory to run I was hoping you guys could look into this and suggest a way to fix this. I like to keep my device clean without installing too much extra applications!
Other than this little problem, I find this as a very top notch ROM. Good work to the developers. Keep it coming
Hope to hear from you guys, and I look forward to newer versions of this ROM, especially one ported with the latest Lollipop release!
Thank You.
---------- Post added at 03:14 PM ---------- Previous post was at 03:06 PM ----------
sp268_simple said:
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..
Click to expand...
Click to collapse
I had this problem at the beginning too. But, I downloaded the latest PA Gapps pack and installed it. Worked like a charm after that!
Here is the download link:
http://d-h.st/qOq
This is the PICO package, which means that it will only install the most basic gapps like playstore and play services that you absolutely need to run the system properly! You will have to download the other apps like Gmail and Hangouts from paystore.
Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle
JalmiNyondong1933 said:
Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle
Click to expand...
Click to collapse
Yes. I installed after lollipop update. Got that error in the first try too!
When flashing the lollipop update, you flashed the hhz12d bootloader. All you have to do is flash the hhz11k bootloader using fastboot. Worked for me after that.
Here is the link where I downloaded hhz11k bootloader:
http://downloadandroidrom.com/file/Nexus5/bootloader/bootloader-hammerhead-hhz11k.zip
:good:
he means cm11. Its work, really, writen now, from flyme, with stock 5.0 and multirom
[EDIT: MY PREVIOUS QUESTION WAS ALREADY ANSWERED] [IGNORE THE ATTACHED IMAGE]
hi my friends! I have 2 questions:
1. I can't make the app "operadora ddd" work with this rom for some reason.
2. Fullscreen mode is definitely broken
Is it normal?
very good
today I used it very good..
Q&A for [ROM][4.4.4][10/13][OFFICIAL] GzRoms -Validus- [6.2 Testing][Falcon]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][10/13][OFFICIAL] GzRoms -Validus- [6.2 Testing][Falcon]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
update
So how do i update this rom im on 4.4.4l version 6.1 moto g and are u guys going to make one for android l just wondering love this rom best one ive had for this device
about validus
in case the maintainer finds this post, testing the latest milestone (6.2) on falcon (moto g, european version), found a few bugs :
- the setting to disable wifi in profiles and power saving mode for the battery (in the void options) is just ignored. When disabling wifi manually, it comes back everytime I exit the lock screen (maybe it's because of another setting but I couldn't find it).
- in sound option, music effects shows viper audio. When clicking on it, it proposes to install its driver automatically. Except that it doesn't work, since there is no log it's hard to know why. I tried the 3 proposed driver, to reinstall busybox (from the playstore), nothing worked.
- And the touch screen suddenly stopped working in 1 situation, I don't know why. I received a mail, when I tried toclick the screen it didn't work, and I couldn't use the touch screen anymore even after puting the phone to sleep and wake it up again, so I had to do a hard reset (power button pressed for a few seconds).
I'll try to keep on using it, but if the touche screen bug comes back I guess I'll have to do something... maybe try another kernel then, it seems related to the kernel...
http://forum.xda-developers.com/showpost.php?p=57054547&postcount=112
This 6.2 MS is built with what version of DK kernel? 1, 1.1 or 2?
Everything else works fine atm.
request
I just want to say that i have been using this rom as my daily driver since 2 days. no major bugs..
just wanted to request that the theme of the settings app should be changed back to the material white again. thank you
I'm using validus 5.0.2, build date says Jan 1. I noticed in a post you said you added the option to change nav bar dimensions, but I don't see it anywhere. Also "performance" under settings is empty.
I guess the questions asked here are of so little importance they don't deserve to be answered...
Can't post screenshot.
Groups still themed white text on white BG.
Rom, gapps, kernel so anything else I forgot to install apart from these?
Boost xt1031
Are You Going To fix Moto G xt1031 CDMA Data, Calls And Text Soon?
I just flashed latest build 1/14/2015 but WiFi not turning on pls help meh alone with ROM I flashed su and donkey kernel nothing helped meh
no Pie control in new build ?
Moto g consumer cellular xt1034 lollipop
anyone please let me know, I have MOTO G CONSUMER CELLULAR XT1034 UNLOCKED Device can i install original LOLLIPOP for my device (NOT ROM)
dracula1520 said:
no Pie control in new build ?
Click to expand...
Click to collapse
The latest build does have pie control, and I love the look of it. Although, I can't figure out how to configure 2nd layer buttons.
Boot loop
Hi guys,
thanks for this ROM but...
I can't understand.... is it for xt1032?
Cause I tried to flash latest build (v7.0) and it stucks on the boot logo... waited for 20 minutes...
any suggestions?
in latest build I cant find PIE controls. Maybe you forgot to include them? Apart from that thanks validus team for this awesome rom! Yesterday I made the jump from milestone 6.2 to lollipop and I am impressed
@koradiavatsal
Just reporting...
Bootloop after flashing the latest version with or without gapps.
koradiavatsal said:
A new test build
This will probably boot. Please confirm
Click to expand...
Click to collapse
@koradiavatsal Yup, boots all right!
@koradiavatsal I've just downloaded the latest version, I'll report back ASAP.
[Q&A] [ROM+KERNEL] [UNOFFICIAL] [5.1] Euphoria-OS 1.1 w/ 3.4.0 CAF Kernel [June 14]
Q&A for [ROM+KERNEL] [UNOFFICIAL] [5.1] Euphoria-OS 1.1 w/ 3.4.0 CAF Kernel [June 14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM+KERNEL] [UNOFFICIAL] [5.1] Euphoria-OS 1.1 w/ 3.4.0 CAF Kernel [June 14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
thanks
Thank you for your efforts, but when using headphones when the volume can not be controlled, and CPU locked my opinion is not a correct decision.
DQin said:
Thank you for your efforts, but when using headphones when the volume can not be controlled, and CPU locked my opinion is not a correct decision.
Click to expand...
Click to collapse
1. try to reboot
2. you can underclock it by flashing a zip
Question regarding kernel settings
How do i change settings like increase the volume on headset, speaker, etc or speedup charging from usb from default to 1000mah, etc? do you have any apps to take care of this or not.. will i be able to use synapse to make these changes.?
No questions are being answered i guess, so I'll be moving out of a very good but unsupported rom
Changelog?
Hi, good job, I'm very satisfied by your ROM. Can I ask where is the changelog ? thanks a lot
Anyone else have proximity sensor issues on 7/19 build? Mine is not working during calls.
gio92 said:
Hi, good job, I'm very satisfied by your ROM. Can I ask where is the changelog ? thanks a lot
Click to expand...
Click to collapse
Changelog to the fixes to the device and kernel trees can be found here.
As for Euphoria-OS changes, that can be found in the OP for the official Euphoria-OS or on their Google+.
Kernel
Anyone have an opinion with render kernel vs this kernel ?? How's it going for you guys, loving the rom tho never had such a smooth and lagfree experience
Any issues with a dirty flash with the latest version (0905) from the previous one (0824) ?
---------- Post added at 11:16 PM ---------- Previous post was at 10:47 PM ----------
Compass still not working with the version 5 September.
I don't know why "xender" app crashed every time when I tried to choose a file for sending.
Bo problem in other roms.
I would like to provide a logcat but my pc has broke. Sorry for this.
Calendar Sync Issue
Hey,
I am having an issue with getting Google Calendar to Sync.
I have seen it mentioned before, but had no luck after I uninstalled the system calendar and reinstalled Google's Calendar from the play store.
Are there any other solutions?
torch problem
when i draw a V to toggle flashlight ,if i turn on the screen ,i just cannt toggle it off until i reboot the phone
Any chance to see a fix on the compass very soon on the release of @ak or @CraZY_BoY^
CraZY_BoY^ said:
1. try to reboot
2. you can underclock it by flashing a zip
Click to expand...
Click to collapse
Perfectly smooth, but began to become complicated, and an imperfect call, expect update
I just flashed the latest build, but I'm experiencing a problem: the menu long press button assignment doesn't work. I set it to long press for recent apps and it worked for a little bit, but then i restarted the phone and it defaults to in-app search. But it still says its set to recent apps switcher. Now it won't work at all and only does in-app search when it's set to recents.
When I remap other button options, they work fine. It's just the menu button option that isn't working. Long press or short press.
Does anyone know how to get past the TrustZone updater error when attempt to flash this (or any ROM) ROM? I updated my firmware/modem to the newest not realizing I would run into flashing issues. Thanks!
I have a few firmware files and flashed them all before the rom because I wasn't sure if new updates include the old ones or not haha. I have a oxygen os firmware update, the one in the original post, and one from Sept. Hope this helps
Once you get it flashed let me know if you have the menu button remap problem too please
I flashed sultans rom to see if it helped with my menu button problems and it did until I restored Bluetooth pairings from an older nandroid backup. After restoring the menu button wouldn't work right in that rom either. So I restored my newest Bluetooth pairings and it works again. I'm guessing that was my problem with this rom too in case anyone else has this problem
Hello,
I've a Xiaomi Mi4c 3GB, flashed recently with Resurrection Remix 5.8.0 and Android Nougat 7.1.1 (security patch 5 December 16 - 3.10.104-#GetResurrected Kernel). The flash is done using TWRP, and OpenGapps ARM64 for Android 7.1.1 in it's PICO version (as suggested by the modder). Currently I'm in Italian (language on which now on tap is available) but I tested also with English US.
Even if enabled as suggested in other threads in this forum, Now on Tap (or Search on Screen) does not work with hardware Home button. When I long press Home, the system opens Google Now application. I've tried to enable Software navigation bar (qemu.hw.mainkeys=0 in build.prop), and software Home correctly opens the Now on Tap functionality.
I've tried also to set VIRTUAL on keylayout/General.kl to try to emulate software home with hardware Home, but it does not work.
All configurations seems correct, the only incongruence is that in Input and Voice Assistant instead of "Google", it shows "launcher3" (I've selected Google Pixel Launcher as default launcher). But actually Now on Tap works with software Home
Do you have any suggestions? How can I make Now on Tap works with Hardware Home?
Than you in advance for any help!
nirvana1289 said:
Hello,
I've a Xiaomi Mi4c 3GB, flashed recently with Resurrection Remix 5.8.0 and Android Nougat 7.1.1 (security patch 5 December 16 - 3.10.104-#GetResurrected Kernel). The flash is done using TWRP, and OpenGapps ARM64 for Android 7.1.1 in it's PICO version (as suggested by the modder). Currently I'm in Italian (language on which now on tap is available) but I tested also with English US.
Even if enabled as suggested in other threads in this forum, Now on Tap (or Search on Screen) does not work with hardware Home button. When I long press Home, the system opens Google Now application. I've tried to enable Software navigation bar (qemu.hw.mainkeys=0 in build.prop), and software Home correctly opens the Now on Tap functionality.
I've tried also to set VIRTUAL on keylayout/General.kl to try to emulate software home with hardware Home, but it does not work.
All configurations seems correct, the only incongruence is that in Input and Voice Assistant instead of "Google", it shows "launcher3" (I've selected Google Pixel Launcher as default launcher). But actually Now on Tap works with software Home
Do you have any suggestions? How can I make Now on Tap works with Hardware Home?
Than you in advance for any help!
Click to expand...
Click to collapse
Hello,
The maintainer of RR for your device needs to add an overlay for your device tree or common while building.
Regards
Vatsal,
Forum Moderator.
Hi, thanks for your answer. I have access to the repository of the ROM, and I think I will have to compile the ROM by myself, but I don't get what you mean by making an overlay of the device tree...
Or better, which is the component that should be overlayed that is not already there? (sorry I'm a noob...)
The repo is located on Github: github.com/AndropaX/android_device_xiaomi_libra branch RR-7.1
Thank you again...
nirvana1289 said:
Hi, thanks for your answer. I have access to the repository of the ROM, and I think I will have to compile the ROM by myself, but I don't get what you mean by making an overlay of the device tree...
Or better, which is the component that should be overlayed that is not already there? (sorry I'm a noob...)
The repo is located on Github: github.com/AndropaX/android_device_xiaomi_libra branch RR-7.1
Thank you again...
Click to expand...
Click to collapse
Hello,
You need to add
Code:
<bool name="config_hwKeysPref">true</bool>
at overlay/frameworks/base/core/res/res/values/config.xml of your device tree/common tree.
Regards
Vatsal,
Forum Moderator.
Thank you!
I have prepared a Pull request with your suggestion. Let's hope it will be accepted! I let you know if it works so you can mark the 3d as solved.
I'm reporting this for future reference.
Vatsal said:
Code:
<bool name="config_hwKeysPref">true</bool>
at overlay/frameworks/base/core/res/res/values/config.xml of your device tree/common tree.
Click to expand...
Click to collapse
@AndropaX (the repo owner) reports that this key is not supported by Resurrection Remix Rom.
nirvana1289 said:
I'm reporting this for future reference.
@AndropaX (the repo owner) reports that this key is not supported by Resurrection Remix Rom.
Click to expand...
Click to collapse
Hello,
If your device has hardware keys support, it will work.
Please link me your pull.
Thanks
Regards
Vatsal,
Forum Moderator.
This is the pull request: Pull Request on Github
This is the issue I opened on the same repo: Issue on Github
Thank you again @Vatsal
nirvana1289 said:
This is the pull request: Pull Request on Github
This is the issue I opened on the same repo: Issue on Github
Thank you again @Vatsal
Click to expand...
Click to collapse
Hello,
I just checked on my RR build. Yeah he is right we don't need that anymore, my bad.
You can assign it from Hardware keys options itself.
I am attaching a screenshot.
Yeeeeeee
You are right!!! Thank you!!! I was trying to configure it in the wrong menu!
Edit:
Found the solution!
The configuration to be checked is inside Resurrection Remix configuration utility:
Settings -> Configuration (Resurrection Remix) -> Buttons (the Italian translation is a little misleading tough) tab (7th tab) -> Hardware keys -> Home Button
On action on long press, select personalized action, there should appear Google Now on Tap. So it is not a bug. The same configuration must be set also in Android settings (Voice and assistant), selecting Google as default assistant.
LineageOS By max127328
Instruction:
If you are using 3.4.67 kernel based custom rom
Flash lollipop 5.0 (use sp-flash tool) firstly
then flash this rom from Twrp
Description
Kernel Version 3.10.+
Android Version : 6.0.1
LineageOS is the successor to the popular CyanogenMod ROM. With an emphasis on openness, community development, and improvement of the stock Android experience, CyanogenMod supported dozens of devices officially with nightly updates, and unofficially, by the efforts of developers in the community, dozens more devices. LineageOS intends to pick up where CyanogenMod left off, but with a redoubled focus on being a grassroots community-focused development effort.
Click to expand...
Click to collapse
Changes
• New Security Patch
• Faster loading
• Change view of settings (UI changes)
• New boot animation
• patched youtube failure
screenshot
Thanks to
darklord4822 for his kernel
Virus25418 firmware Test
Download
Rom:here (*new)
Gapps :here
SuperSu:here
old
Rom :here
Click to expand...
Click to collapse
*Root is available @ settings-->developer menu
No Front Cam
How to fix this?
how to fix no front cam? everything works fine except front cam.
renren28 said:
how to fix no front cam? everything works fine except front cam.
Click to expand...
Click to collapse
this problem is currently under fixing,meantime you can use third-party camera apps.
rejul said:
this problem is currently under fixing,meantime you can use third-party camera apps.
Click to expand...
Click to collapse
What particular Camera app should I download? Because I already download camera apps but no Front Cam button on app. Thanks in advance.
renren28 said:
What particular Camera app should I download? Because I already download camera apps but no Front Cam button on app. Thanks in advance.
Click to expand...
Click to collapse
Sorry renren28,I had contacted the developer ,as it is core bug ,No solution is available for now atleast .As soon as fix is uploaded i will pm you.
rejul said:
Sorry renren,I had contacted the developer ,as it is core bug ,No solution is available for now atleast .As soon as fix is uploaded i will pm you.
Click to expand...
Click to collapse
Thanks. is this similar on CM13 bug, that you need to flash boot.img to fix front cam?
hello im about to install LineageOs to lenovo A536
is there anything new ?
Is there version 14.1 for this smartphone ? i checked somewhere but im not sure about that source
Mate the rooms is quite amazing..
But there are a few bugs
Camera
And when I open the dialer it reboots
Whenever I check for lineage os update it says check internet connection
Camera , microphone, torch, my files are not working and it is not showing my contact list of my sim
Plzzz told the solution plzzz....
Waiting for update. More Power to Developer of this ROM!
Link is dead, could you please reupload it somewhere else, for example on mega.nz?
Thanks
GoodMorning, some users has a working front cam using this ROM. I wonder how it works. I use their backup boot.IMG and flash it on my device. But still no luck.
Internal storage issues
After i flash my phone my internal storage cannot detected in any file manager plss help mee.
Google Drive:
Sorry. You do not have access to this document because it is inconsistent with our Terms of Service.
- Czech republic
Heya, guys!
I'm having a BIG problem.. I flashed LineageOS ROM through TWRP 3.0.2 recovery (my last ROM was on the 3.4.67 kernel) and now I lost my IMEI numbers. Could you please help me fix it? I installed all the drivers that are needed, but my PC still doesn't recognize the phone and FlashTool can't work either. I found some patches to flash through the recovery and restore it that way, but this didn't help too. I don't know what to do, because I need that phone and I can't fix it anyway. Thanks.
Link dead, please reupload
The link to the new rom is dead, please can you reupload it?