Related
New Firmware : L19C185B387
Date : May 4th, 2017
http://www.stechguide.com/download-h...nougat-update/
http://update.hicloud.com:8180/TDS/d...ull/update.zip
http://update.hicloud.com:8180/TDS/d...hw_meafnaf.zip
How to Install B387 Update on Huawei P9
Step 1
1) First, download Huawei P9 B387 Update.zip from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now select Software Upgrade and start SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Done.
Step 2
1) Now download update_data_full_EVA-L09_hw_eu for Huawei P9 from above and extract it.
2) Now copy all data including update.app file in the dload folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now select Software Upgrade and start SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Done.
After update, I have some problems, like :
a) ringtones and notifications sound cannot be change in the settings.
b) the old one of HW Themes app is gone; with the new one you cannot change the Themes.
I do hardreset, but nothing changes.
I will try to install both programs again.
If have the same (and/or other) problems, so pls inform, and if available, the solution.
Hi friends,
the firmware B387 has got some big problems, like without changes of ringstone and themes, or without camera etc.
AND with some flashing problems like rollback, I could back now to MM (= L19C185B180) with the rollback firmware of C185. Then I flash to B220. After installing I received the information, that there is a new firmware like B385. I download and flash this. Now working my handy without any problems.
Friends, pls wait with flashing of B387 for L19C185. This firmware has got big problems. I cannot recommend this.
Is there any possibility to reflash B385 along with hw full data to downgrade from B387... Or long route of MM rollback package is must?
m00miali said:
Is there any possibility to reflash B385 along with hw full data to downgrade from B387... Or long route of MM rollback package is must?
Click to expand...
Click to collapse
Hi m00miali: I tried, but without any success, therefore I went to the long way.
Sad it is
Follow hactic route... Rollback to MM... Re back to B387... Works fine now... Theme and calender present now
m00miali said:
Follow hactic route... Rollback to MM... Re back to B387... Works fine now... Theme and calender present now
Click to expand...
Click to collapse
how u rollback to MM,which version u use and which method, please share
Just used recommended rollback package... Transition key to B900 then flashed MM B220 via dload. Then directly to B387 via ff
multiturk said:
After update, I have some problems, like :
a) ringtones and notifications sound cannot be change in the settings.
b) the old one of HW Themes app is gone; with the new one you cannot change the Themes.
I do hardreset, but nothing changes.
I will try to install both programs again.
If have the same (and/or other) problems, so pls inform, and if available, the solution.
Click to expand...
Click to collapse
Have you tried to remove system cache? I think that will fix it
IDontKnowAnythingAtAll said:
Have you tried to remove system cache? I think that will fix it
Click to expand...
Click to collapse
No i tried before, the only thing work to rollback to MM then upgrade again to Nougat
spring80 said:
No i tried before, the only thing work to rollback to MM then upgrade again to Nougat
Click to expand...
Click to collapse
yes my friend... I'm on vers. B385, and waiting of (new) official firmware.
Hello guys.
I received my Nokia 7 Plus a few weeks ago and I’m very happy with it. I was excited for the Android One certification, which allows to have the Android updates as fast as possible.
Unfortunately, the phone I bought didn’t find any updates. I was stuck on the Android 8.0 version with Feb. security patches. I knew that Android 8.1 version was out, with June security patches.
After many research, it appears that the carrier you use is blocking updates. In my case that was EE (UK operator) and Bouygues Telecom (French carrier).
The phone seems to be “stuck” in the carrier’s updates channel.
So, in this tutorial, I’m going to show you how to get the latest version of the phone’s system. This tutorial will also allow you to be on the “right” channel for fast updates and opt out of your carrier’s channel (which doesn’t allow you to get the updates as quick as you can.)
The zip file is the latest version of Android Oreo, made for the Nokia 7 plus. Usually it’s used to restore the phone from Android P DP.
IMPORTANT INFORMATION: The zip file is made for a clean installation. So, remember that the phone is going to be wiped, and you will lose anything that’s on it.
You will need
• Nokia 7 plus, model TA-1046, charged at roughly 75%.
• A working computer.
• The file
• USB cable
• A brain.
DOWNLOAD THE FILE :
https://drive.google.com/open?id=10O9OmUm5H8OmKlbOi8AeRupUycqAkp5G (Google Drive)
http://filecloud.io/j20w1rsx7 (Filecloud.io)
http://dl.free.fr/getfile.pl?file=/YIuSIcJk (dl.free.fr)
http://turbobit.net/91r03d5rsiey.html (turbobit.net)
https://uptobox.com/klk9zta4vegl (Uptobox)
1. Download the ZIP file on your computer and transfer it in the root storage of your phone.
2. Disconnect safely your phone from the computer.
3. Open the notifications area of your phone. You should see an OTA update notification.
If you don’t see it, reboot your phone.
4. Click on this OTA notification.
5. Accept the terms and conditions and start the update. It’s better to have the phone plugged to a power socket, if you can.
6. Wait until the completion of the update. It could take a while, so be patient.
7. Let the phone reboot...
8. Go in the settings, and search for updates again. If there’s an update, do it!
Finished! Now, you will have the latest updates, as quick as possible.
This doesn't for me.
mejonoobpoako said:
This doesn't for me.
Click to expand...
Click to collapse
Explain what's wrong. I will help you
It doent show any update.
mejonoobpoako said:
It doent show any update.
Click to expand...
Click to collapse
Did you reboot your phone and checked the updates on the Settings app ?
Are you sure that the ZIP file is in the root folder of your phone's internal storage ?
At the end of the update in question was published by the official units.
Notice that the beta version is.
resource connection : https://bbs.nubia.cn/thread-1462621-1-1.html
As an informative question: If we update the rooted and installed gapps in all versions, can there be a problem?
For example, you may be deprived of gappa until you have Brick or New root?
chinese english translation is bad because i did not understand.
*Changes*
* JOS updated X-JOS
* Android 8.1 version updated Android 9.0
*System optimization : system performance, enhance the overall fluency
*optimization: system stability
*optimization: Android update security patches
*smart card services added: "fast application" card and enjoy the native application experience the performance of third-party applications
*optimization: Some third-party application stability
*fix: part of the game (the king of glory, to stimulate the battlefield) probability of the emergence of flash back problems
this update optimized content including but not limited to the above-listed items
Note precautions: ● This is a trial version upgrade, only support SD card upgrade package: After you download this version of the full SD card pack, then click on "Settings" -> "System Update" -> "button in the upper right corner function" -> "local upgrade", select SD card pack, click the "install now" wait upgrade is complete;●trial version where there may be imperfections on experience details, please according to their own circumstances choose to upgrade;●upgrade this version P Andrews after, if you want to roll back to previous versions, you need to back up phone data,Shuangqing SD card pack before upgrading history, after the completion of normal use;● Make sure the phone battery before upgrading adequate and mobile phone data backup (recommended use its own backup software), so as not to cause the phone to upgrade data loss; ●before upgrading, cancellation of various screen lock, the upgrade process, make sure the phone flat, and not arbitrarily touch the screen, follow the onscreen prompts ;● as already get Root privileges, be sure to remove the Root privileges, the state returned to normal version, and restore the factory settings before upgrading, otherwise easily lead to the escalation Defeated.
Download Link: http://romdownload.nubia.com/nubiaX/V3.05/NX616J-update.zip
Altarnatife Download Link : https://drive.google.com/file/d/1AqeiP-uQYI5jq7m1SabJ51h1MFn31pkn/edit
Thanks : @Ravira43
MD5 code: 66DD854D61C742326C01200E580E2952
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Ravira43 said:
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Click to expand...
Click to collapse
Hi. I need to ask. What does this mean? Does this include Play Store? Is it a global version?
Or is it just another Chinese ROM?
Thank you!
Ravira43 said:
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Click to expand...
Click to collapse
Used " internet download menager " and search google " idm 16 part download" use.
gigilex said:
Hi. I need to ask. What does this mean? Does this include Play Store? Is it a global version?
Or is it just another Chinese ROM?
Thank you!
Click to expand...
Click to collapse
No, only Chinese ROM. unlucky.
But İnstall new Play store way
1. https://bbs.nubia.cn/thread-1464227-1-1.html
2. https://bbs.nubia.cn/thread-1462852-1-1.html
Never mind, a friend of mine has already downloaded and uploaded it on google.
Can't paste the link, because I'm a new member.
Ravira43 said:
Never mind, a friend of mine has already downloaded and uploaded it on google.
Can't paste the link, because I'm a new member.
Click to expand...
Click to collapse
I'm glad you got the solution.
I can publish the link if you throw it.
Guys I have just received an OTA update 1.4gb version 3.05 on my phone.
I would install it but my fear is to loose all data and settings.
Did anyone installed it?
I've also received the OTA update, I would try it but the chinese links for Gapps are nor working (source download not posssible)
Does anyone know how to unroot the terminal?
When local updating to 3.05, the terminal will brick.
How to install Android 9
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Ravira43 said:
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Click to expand...
Click to collapse
hi i run android 9 on my nubia x rooted, but how can we get Gapps working on it please ? thanks
I have twrp running on it too.
Ravira43 said:
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Click to expand...
Click to collapse
it's ok everything work fine, Nubia x android 9 with all google services OK exept voice match ( OK google from screen).
elnas1369 said:
it's ok everything work fine, Nubia x android 9 with all google services OK exept voice match ( OK google from screen).
Click to expand...
Click to collapse
Yeah I'm also looking for a solution how to remove this ****ty nubia voice and replace it with google.
Yeah it could be nice to replace it with Google assistant
I would install Android 9 but my fear is to loose all configurations, permissions, etc and It will take long time to reconfigure every thing.
My question is : is it really worth to install it or there are more or less the same performance?
Anyone knows if nubia X will have final android 9?
Guys!! I know this sounds stupid but I have no "update" option in my settings!! Please help if you know what is going on with my new Nubia X!
Shahin13 said:
Guys!! I know this sounds stupid but I have no "update" option in my settings!! Please help if you know what is going on with my new Nubia X!
Click to expand...
Click to collapse
Download the rom for Android 9, got to settings -> "System update", then from the menu up, select "Local update".
No issues with 3.05 - works fine, nothings from the apps, data or setting is flushed. But the phone is unrooted and you need to process it again.
But recently I have updated it from 3.03 to 3.11 and I can't find the root tool.
Anyone has idea where to find it?
Thanks.
3.11 play store
Looking allsou the rooting tool for 3.11. Needed play store.
HiSuiteLauncher
EMUI 9 fix and EMUI 10 Instructions here: Post. JSON file UPDATED!!!
A Launcher for HiSuite which grabs its ssl calls and hooks them so you can update to EMUI 9.1.
What does it do?
It will launch an instance of HiSuite, Huawei Smartphone PC Manager, if installed. This instance will have a hook to ssl calls made by HiSuite to HiCloud. So we can now handle responses by editing a simple text file for a full ota update. It won't touch anything else. With an update response, HiSuite should now handle the update process including the rollback option if available and a proper imei authorization to HiCloud. This is a way to force an update to your Huawei/Honor smartphone with a standard tool.
Setup and General Info
You will need FirmwareFinder (TeamMT). If you've been around Huawei/Honor forums you should already know what it is. With FF we can track ota updates and even run an authorization test for an update. This is important because we're gonna be using the ota ID and its full link to pass to HiSuite. If you spot an update and your device is not yet authorized to install it your phone will most likely avoid it either.
!IMPORTANT!: I've been using this method since march/19 without any problems. No wipes, connectivity losses, call problems, weird behavior whatsoever. In fact, I'm running EMUI 9.1 now. I don't know how you can ensure the ID you picked is the right one for your device - considering you are using the search correctly: for my Honor 10 C636 I search for COL-L29C636. You might notice the name of the device seems a bit strange and here comes a massive confusion. Col-L29 is now COL-LGRP2-OVS (C636 is overseas) with a bunch of small step rom versions like .226 .227. 228 .229. I usually pick the very first version my phone is authorized for. So my last update was .227. After the update I tested my phone for others versions like .228 and .229 and my phone was authorized for those too. Go figure!
Since HiSuite 9+ the cust info is in the update request and I believe HiCloud suggests the right package for your phone. The reason behind this is because the ota file I get sometimes it's different in size and checksum from the one you get from FF even if it's the same ID. Total speculation here. The cust and preload info have their own json structure. Please revisit the json file below. You can find find cust and preload data in FF simply by searching <your phone model>-<cust/preload>. They both feature their own IDs and urls and they are separated by EMUI versions (Android version).
ALWAYS take note of the rollback ID suggested by HiCloud. It might look like it's just a regular version but it's not! An update and a rollback IDs are different, with different flash scripts. HiCloud will send rollback data with major updates like from EMUI 8.1 to EMUI 9; EMUI 9 to EMUI 9.1. You can spot both IDs in FF as well.
Instructions:
Just extract the zip folder to any suitable folder in your computer and run the Launcher.exe. A console window will popup and HiSuite will appear right after. You can monitor HiSuite calls in the console window.
Remove root and TWRP. You have to be full stock.
Backup data. Even HiSuite will ask you to do it.
Be prepared to download at least 4Gb of data while keeping your phone plugged to your pc.
You will need a very basic understanding of json data structure.
You have 2 files that should remain in the main folder of the launcher:
hisuite9_request_update.txt: you should add the ID to "versionID" and full link to the update ota in "url". Get those from FF.
Please notice that there is a pattern here. The "url" data doesn't include the actual file. UPDATED!!!
{
"status":"0",
"versionPackageCheckResults":[
{
"status":"0",
"autoPollingCycle":"1",
"components":[
{
"componentID":1,
"createTime":"2020-06-19T03:41:07+0000",
"description":"COL-LGRP2-OVS 10.0.0.177",
"name":"COL-LGRP2-OVS 10.0.0.177",
"pointVersion":"1",
"reserveUrl":"updatessl.dbankcdn.com",
"ruleAttr":"",
"url":"http://update.dbankcdn.com/TDS/data/files/p3/s15/G5459/g1755/v<UPDATE ID GOES HERE>/f1/",
"version":"COL-LGRP2-OVS 10.0.0.177",
"versionID":"UPDATE ID GOES HERE"
}
],
"versionPackageType":2,
"checkEnd":"1"
},
{
"status":"0",
"autoPollingCycle":"1",
"components":[
{
"componentID":1,
"createTime":"2020-06-19T03:03:11+0000",
"description":"COL-L29-CUST 10.0.0.3(C636)",
"name":"COL-L29-CUST 10.0.0.3(C636)",
"pointVersion":"1",
"reserveUrl":"updatessl.dbankcdn.com",
"ruleAttr":"",
"url":"http://update.dbankcdn.com/TDS/data/files/p3/s15/G5459/g1755/v<CUST ID>/f1/",
"version":"COL-L29-CUST 10.0.0.3(C636)",
"versionID":"CUST ID"
}
],
"versionPackageType":3,
"checkEnd":"1"
},
{
"status":"0",
"autoPollingCycle":"1",
"components":[
{
"componentID":1,
"createTime":"2020-06-19T03:03:11+0000",
"description":"COL-L29-PRELOAD 10.0.0.4(C636R1)",
"name":"COL-L29-PRELOAD 10.0.0.4(C636R1)",
"pointVersion":"1",
"reserveUrl":"updatessl.dbankcdn.com",
"ruleAttr":"",
"url":"http://update.dbankcdn.com/TDS/data/files/p3/s15/G5459/g1755/v<PRELOAD ID>/f1/",
"version":"COL-L29-PRELOAD 10.0.0.4(C636R1)",
"versionID":"PRELOAD ID"
}
],
"versionPackageType":4,
"checkEnd":"1"
}
]
}
IMEI.txt: add the first IMEI of your phone to the first line of this file.
Hit Update in HiSuite and you should see the red dot indicating an ota update (in fact, the update you added in the file above).
log.txt: this file holds the requests/responses during the current session.
Launcher.exe.config: here you can find a few setup options like hisuite folder.
Bugs
- Well, as far as I'm concerned you shouldn't face any bugs since it's pretty straight forward. BUT, please take my advice: if you're not sure about which update to go for avoid it altogether.
- It does not work with incremental updates. The recovery will reject it.
- In your phone, about phone page, it might not show the update changelog. Sometimes it does show, sometimes it doesn't.
- I cannot confirm this but since I always update my phone through this method I don't get incremental updates anymore. I don't know if it's because I'm always way ahead (updates usually take forever to reach my phone before and that's why I've been doing all of this) or anything else.
Notes:
- I have to thank Smaehtin (XDA) for kindly answering my request to support this tool for Honor 10 and for actually providing this method.
- Although I'm a professional developer (ERP stuff), I'm not used to C# so the code might look a bit messy and funky here and there. I'm sorry for that.
- The solution used is from a freeware compiler, SharDevelop (http://www.icsharpcode.net/OpenSource/SD/).
- Disclaimer here, I am not responsible for any damage you (your phone) might suffer from attempting this. I tested it myself several times in my phone, Honor 10 C636 (COL-L29C636). HiSuite will handle the whole update process but you still can provide wrong data as of wrong IDs or wrong url.
- We are using EasyHook (https://easyhook.github.io/) and Newtonsoft.Json (https://www.newtonsoft.com/json) libs.
Source:
https://github.com/magnot/HiSuiteLauncher
Many thanks for the instructions ??
Success update to emui 9.1.0.325 with this guide.
Same all ok ! thanks ! OFF TOPIC:anyone know how to disable suggestion on drawer ?
Thanks, works like a charm!
this made my day, many thanks superb tool
@MagnoT Thanks for your work , new version available , I change only version ID and Url link its ok to update ?
Any idea how to spoof only IMEI.txt ?
-Giving us the mean with an early device 's imei to force install the right next update or check what is latest hicloud's OVS FullOTA-MF for a device's cust region and imei.
oslo83 said:
Any idea how to spoof only IMEI.txt ?
-Giving us the mean with an early device 's imei to force install the right next update or check what is latest hicloud's OVS FullOTA-MF for a device's cust region and imei.
Click to expand...
Click to collapse
I wouldn't do that. There's no need to rush an update that way. And if you're not yet authorized for an update the recovery will just reject it.
leap_ahead said:
@MagnoT Thanks for your work , new version available , I change only version ID and Url link its ok to update ?
Click to expand...
Click to collapse
Yep, if you have FF confirmation for your device!
.326 is available in FF for quite some time. It's the August EMUI 9.1 security patch update but my device is not authorized for it just yet. The ID is 297131. I'll wait.
MagnoT said:
I wouldn't do that. There's no need to rush an update that way. And if you're not yet authorized for an update the recovery will just reject it.
Click to expand...
Click to collapse
I will do.
I m speaking about getting to know myself which is the latest approved OVS builds for a specified region. (determined by spoofed/original device region)
Late 9.1 OVS build are surely/maybe cust specific now...
By the way, I'm already with a bootloader unlocked on a LYA-L29 demo C652 device which is soft-rebranded to C432 via magisk ^^
So far, I'm getting C432 OTAs ! (when time finally comes for my imei) on in-built Emui updater.
Your tool seems great. -never had to use it for now. (I did with custom FF DNS for some times)
-But I like to use it just to know what is the latest/next right C432 OVS build which is approved and actually fetched for a specified imei.
-Maybe I should get further on my magisk module which is softrebranding to spoof imei for Emui Updater process..... (just though)
MagnoT said:
Yep, if you have FF confirmation for your device!
.326 is available in FF for quite some time. It's the August EMUI 9.1 security patch update but my device is not authorized for it just yet. The ID is 297131. I'll wait.
Click to expand...
Click to collapse
You can check. 330! But still in july update
oslo83 said:
I will do.
I m speaking about getting to know myself which is the latest approved OVS builds for a specified region. (determined by spoofed/original device region)
Late 9.1 OVS build are surely/maybe cust specific now...
By the way, I'm already with a bootloader unlocked on a LYA-L29 demo C652 device which is soft-rebranded to C432 via magisk ^^
So far, I'm getting C432 OTAs ! (when time finally comes for my imei) on in-built Emui updater.
Your tool seems great. -never had to use it for now. (I did with custom FF DNS for some times)
-But I like to use it just to know what is the latest/next right C432 OVS build which is approved and actually fetched for a specified imei.
-Maybe I should get further on my magisk module which is softrebranding to spoof imei for Emui Updater process..... (just though)
Click to expand...
Click to collapse
I guess I get what you mean. In the source code there's an entry to spoof imei which I converted to read from file but that's for the authorization request. Still, I wouldn't go for it. As for knowing in advance the latest/next update roll out based on imei spoofing that would be kinda hard to accomplish imo because... well, it's random and the effort doesn't pay off. I'll have a look into it and update the tool.
leap_ahead said:
You can check. 330! But still in july update
Click to expand...
Click to collapse
.330 it's a july security patch for EMUI 9.1. I believe it's still an entry to EMUI 9.1 just like .325. That's the mess we get with this OVS thing... different versions of the same patch all approved. I'll wait for the august update.
MagnoT said:
.330 it's a july security patch for EMUI 9.1. I believe it's still an entry to EMUI 9.1 just like .325. That's the mess we get with this OVS thing... different versions of the same patch all approved. I'll wait for the august update.
Click to expand...
Click to collapse
I flash 326 over 330 all ok !
326 is approved for my device, upgrading now thx to this magic tool
leap_ahead said:
I flash 326 over 330 all ok !
Click to expand...
Click to collapse
Ing.King said:
326 is approved for my device, upgrading now thx to this magic tool
Click to expand...
Click to collapse
Thanks for the info guys! :good: I just checked FF and now I'm approved for the .326 update. I'll flash it tonight.
Just my curiosity, can i use it for the honor view 10?
Any Huawei/Honor device EMUI 9 or 9.1
chainsmkgbstrd said:
Just my curiosity, can i use it for the honor view 10?
Click to expand...
Click to collapse
Honestly it should work for any hisuite compatible device. You just have to take note of the device id, correct name tags and of course make sure the update you're going for is approved for it and set it up.
【Version】16.0420.2006.30
【Model Name】ROG Phone (ZS600KL)
【Release Date】2020/08/11
【Release Note】
Improved the audio quality of the speaker when playing games.
3rd party app compability improved: QMZG
Updated Android security patch
Source : https://zentalk.asus.com/en/discuss...e-zs600kl-ww-16-0420-2006-30-android-p#latest
I am looking forward to all the beta testers that will complain about issues in this topic before i upgrade to P in 6 months
I am 99% sure that most things will not work, for example Magisk, edXposed, gravity box......
Anyone got the update?
imkentoy said:
Anyone got the update?
Click to expand...
Click to collapse
nope !!!!!!!!!!!!!!!!!!!!!!!!!!!
User War10K from Zen Talk communities has uploaded the WW Firmware link:
【Version】
16.0410.1910.91
【Model Name】
ROG Phone (ZS600KL)
【Release Date】
2019/11/28
https://www.asus.com/zentalk/forum....extra=page=1&filter=lastpost&orderby=lastpost
krkdesigns said:
User War10K from Zen Talk communities has uploaded the WW Firmware:
【Version】
16.0410.1910.91
【Model Name】
ROG Phone (ZS600KL)
【Release Date】
2019/11/28
https://www.asus.com/zentalk/forum....extra=page=1&filter=lastpost&orderby=lastpost
Click to expand...
Click to collapse
NO he didn´t !!!!
I downloaded the link and it worked perfectly. I have the update and it looks good. thanks for the tip and have a nice weekend
snoopy-doopy said:
NO he didn´t !!!!
Click to expand...
Click to collapse
Technically you're correct; he provided a link. But the link is valid.
I downloaded the file and flashed it, for now it works great
thx
krkdesigns said:
User War10K from Zen Talk communities has uploaded the WW Firmware:
【Version】
16.0410.1910.91
【Model Name】
ROG Phone (ZS600KL)
【Release Date】
2019/11/28
https://www.asus.com/zentalk/forum....extra=page=1&filter=lastpost&orderby=lastpost
Click to expand...
Click to collapse
Thanks for the link. Updated OP
That was a direct download link from asus server.
I've got serval bootloops before it start normally, plus the fist install i needed to format because failed boot, so it's very unstable and i'm also notice there no full stock recovery, but hopefully it will get one on stable.
Edit: it's happend again, it's not safe to use.
No OTA yet in HKG....keeps pressing the update button....
This will work on WW_ZS600KL ?
mauronofrio said:
This will work on WW_ZS600KL ?
Click to expand...
Click to collapse
Offical firmware website:
https://www.asus.com/us/Phone/ROG-Phone/HelpDesk_BIOS/
New update WW-16.0410.1910.95
【Version】16.0410.1910.95
【Model Name】ROG Phone (ZS600KL)
【Release Date】2019/12/16
【Release Note】
Android P to Android P
1. User will encounter a brief black screen last for 3 to 5 minutes (Depending on the amount of data) after it finished the FOTA and reboot. Please do not force reboot the device because of the system has been checking, it would return to normal very soon.
2. Fixed the issue that TwinApps occasional not able to be launched
3. Fixed the Audio wizard can not be used in Russia
4. Fixed display error of Classic Theme Settings
5. Disabled BSNL VoLTE function in India
6. Fixed that screenshot could not be read by computer when device connects with computer
7. Fixed the game of Arena of Valor noise issue when live streaming with front camera
Android O to Android P
1. Upgraded system to Android P
2. User will encounter a brief black screen last for 3 to 5 minutes (Depending on the amount of data) after it finished the FOTA and reboot. Please do not force reboot the device because of the system has been checking, it would return to normal very soon.
3. Removed Page Marker, ZeniMoji, Report Location in Safeguard, weather animation setting, AI charging
4. Removed the Yandex cloud opetion of File Manager Application
5. Upgraded Game Center to Armoury Crate with whole new design
6. Added "Adaptive brightness", "Adaptive Battery", "New notifications", "Status bar icon manager", "Screen recorder", and "Local backup" in Settings
7. Upgraded Game Genie panel with new design and features
8. Added Android P "Swipe up on Home button" gesture
9. Support 24-hour forecast in Weather application
10. Revamped Mobile Manager, Contacts, File Manager, Calculator, Clock, Gallery, and Weather applications
Source : https://zentalk.asus.com/en/discuss...e-zs600kl-ww-16-0410-1910-95-android-p#latest
Do not update to android 9
Issue with phone callsAfter the update to Android pie, call drop in seconds while using bluetooth. This happens with the preloaded app and whatsapp calls.
Can anyone confirm if Volte still work after this update?
every time I tried to sideload the new firmware I get an error message "adb: failed to read command: No error" any suggestions to get it flashed to P?
mbze430 said:
every time I tried to sideload the new firmware I get an error message "adb: failed to read command: No error" any suggestions to get it flashed to P?
Click to expand...
Click to collapse
updating to pie its not working by sideloading you need to save the pie file to your storage and if you cant access your phone you can try flash the latest RAW File just find in other forums.
Well, after trying the RAW file a second time, it is now working. No clue what the deal was before. It shouldn't have even had Magisk installed still after flashing that RAW file, but it did, and was causing the problems.
Second flash actually reset everything. Can't delete this post though.