How to fix a phone when you have "deleted" its ability to charge - Nexus 5 Q&A, Help & Troubleshooting

So I just did this.
My phone was dead. A paperweight. It in its coffin, its box.
Until I received a message from one awesome person who told me I can still save my phone.
Basically, what I did was wipe out my recovery and wipe a lot of other stuff using TWRP recovery and using format data and advanced options.
My phone wouldnt even charge so I gave up hope.
Then I received an awesome message from an awesome person who explained how I could still access my bootloader and guided me through this guide as to how I can flash in a stock OS- https://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
So I told my brother to charge his phone, and then took mine apart. and then took his apart. then used his battery to turn on my phone and flash the image. I did it.
then I turned my phone on and it got stuck at the google screen. Similar to the problem the first time around.
I turned it off and tried to charge it and thankfully I could. So it wasnt as bad.
So I flashed again and this time we got to another screen. Still google but a better animation.
It was taking too long to load so I turned it off and then on again.
And voila. One of the quickest boot ups I've had with the Nexus 5.
So that's how you do it. I'm not 100% sure if this is the right place for this and I apologise for the rantish style of this post but I am so happy about this.
There was a casualty though. My brothers phones power button was broken. Meaning I could only turn it off once and I wouldnt be able to turn it on unless I fix the power button.
I have not been able to fix the power button because the inner power button is broken. I,e I think it needs to be soldered back on. So thats one phone which died in order to save another.
I could look for help with someone in my family who knows how to solder stuff on and see what we can do.
Does anyone know any way I could get away with this without soldering?
even if it means I can only use the power button once. As in like, if there's any way I could turn on my phone, even just once, but then I dont need to solder?
I can keep my phone charged all the time after that...

The power button to turn it on is a very cheap piece... Think about a 2 USD 10 pcs.. buy it on eBay and take the mobo to any place that could do the job (take the old button apart and put the new one) it's sounds like a big deal but it's not
Good luck mate
Sent from my HTC One_M8 using Tapatalk

joepastillas01 said:
The power button to turn it on is a very cheap piece... Think about a 2 USD 10 pcs.. buy it on eBay and take the mobo to any place that could do the job (take the old button apart and put the new one) it's sounds like a big deal but it's not
Good luck mate
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Thanks man
I opened it up and the power button seems fine. Its just been separated from the motherboard so it needs to be soldered on so idk why I would need to buy a new power button.
I have no experience with soldering stuff so yes I am going to take it to a shop and ask the guy to repair it.

Still recommend to get a new power button, you'll have to go to a shop and ask somebody to do the job, it's better to do it with a brand new button
Sent from my HTC One_M8 using Tapatalk

Related

Not sure where to begin, but any help given is appreciated

I purchased a G2X online without the battery or back cover. So I go on ebay and buy a back cover and a battery.
I try to power it on, but holding the power button does not work. If I hold the power button and the volume down button simultaneously, I get the LG Splash screen and the bottom button lights come on, but then it shuts off. And it only does this when it's plugged into a power source.
Does this mean my battery is dead? Or has someone tried to flash something incorrectly and now the phone won't work? Again, I'm not even sure where to begin troubleshooting.
Much obliged
Alluro said:
I purchased a G2X online without the battery or back cover. So I go on ebay and buy a back cover and a battery.
I try to power it on, but holding the power button does not work. If I hold the power button and the volume down button simultaneously, I get the LG Splash screen and the bottom button lights come on, but then it shuts off. And it only does this when it's plugged into a power source.
Does this mean my battery is dead? Or has someone tried to flash something incorrectly and now the phone won't work? Again, I'm not even sure where to begin troubleshooting.
Much obliged
Click to expand...
Click to collapse
Is it a third party battery? You may want to try buying an official one from T-Mobile, pretty expensive but at least you can have some assurance that it'll work (if that is the problem).
It may not be the battery though, because my phone will turn on without a battery while plugged in so, try NVFlashing clockworkmod recovery and then see if you can boot into clockworkmod recovery, if you can then I think everything should be okay.
IRASadPanda said:
Is it a third party battery? You may want to try buying an official one from T-Mobile, pretty expensive but at least you can have some assurance that it'll work (if that is the problem).
It may not be the battery though, because my phone will turn on without a battery while plugged in so, try NVFlashing clockworkmod recovery and then see if you can boot into clockworkmod recovery, if you can then I think everything should be okay.
Click to expand...
Click to collapse
Yep sounds like a corrupted cwm install just search nvflash its super easy one click program.
If not get a new battery on Amazon or something good luck
Pin it to Win it.
Just a heads up. Typically replacement phones are sent out without a battery or back because they are a replacement. The company expects the customer to use his old battery and back from his previous phone. So people sell their old phones which may or may not have fixable issues. Therefore be very cautious when purchasing a naked phone.
That said. I would search xda, see if you can connect your phone to a computer and get your custom bling on.
Sent from my LG-P999 using xda premium
shovelhead83 said:
Just a heads up. Typically replacement phones are sent out without a battery or back because they are a replacement. The company expects the customer to use his old battery and back from his previous phone. So people sell their old phones which may or may not have fixable issues. Therefore be very cautious when purchasing a naked phone.
That said. I would search xda, see if you can connect your phone to a computer and get your custom bling on.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Sums it up
Sent from my LG-P999 using XDA App
Thanks for the input guys. I just realized in addition to the weird boot issue, the battery connecting pins inside the phone are broken. What a nightmare
If this phone was released last april, can i send this to the manufacturer for a warranty repair?
Alluro said:
Thanks for the input guys. I just realized in addition to the weird boot issue, the battery connecting pins inside the phone are broken. What a nightmare
If this phone was released last april, can i send this to the manufacturer for a warranty repair?
Click to expand...
Click to collapse
Seeing as it's under they year warranty yes you can BUT you'd have to have the original receipt
Sent from my Super Duper Uber G2x using Tapatalk
creglenn said:
Seeing as it's under they year warranty yes you can BUT you'd have to have the original receipt
Sent from my Super Duper Uber G2x using Tapatalk
Click to expand...
Click to collapse
Yeah, you HAVE to be the original owner. Not have a receipt as T-Mobile checks who was the first person to put their SIM card in it.
Why would you buy a phone without knowing if it works or not anyways?
Sent from my amazing G2X running Bionic Reloaded v1.2.1

Skyrocket randomly restarts and vibrates at 2 second intervals?

This has been happening for a few days now, the phone turns off and endlessly vibrates until I pull the battery, and then it does it again and again but it'll work for a few hours before it happens again... I've tried different roms but its still happening and it's getting very frustrating
does it do it on stock? And are you over clocked?
CM9 Skyrocket
droid512 said:
does it do it on stock? And are you over clocked?
CM9 Skyrocket
Click to expand...
Click to collapse
I'm back on gingerbread now cuz ICS was unstable and im not overclocked
Sounds like a stuck power button. There is a thread on this somewhere
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mindmajick said:
Sounds like a stuck power button. There is a thread on this somewhere
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
You mean like physically? Seems fine the phone just starts doing it randomly while it's just sitting on the bed. Right now it's not even turning on at all no matter what I try :/
...
Here is one example:
http://forum.xda-developers.com/showthread.php?t=1801226
I know there is a good one that goes through the logic of it... but the symptoms seem the same.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
It's in download mode now, I'm going to try downloading stock Rogers ICS and see if the problem persists, if it does I still have 5 months of warranty so hopefully that'll be covered
Ok. You can try jamming on the power button repeatedly too...
Good luck!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Looks like the skyrocket's done for good.. I'm going to take it in to the store tomorrow but what do you think they'll say when they fix it and find out it's rooted?
SGS2X said:
Looks like the skyrocket's done for good.. I'm going to take it in to the store tomorrow but what do you think they'll say when they fix it and find out it's rooted?
Click to expand...
Click to collapse
EDIT: Is there any way to get my files off the internal SD without being able to turn the phone on? can't get into download mode or recovery because the phone just turns off 3-4 seconds in
SGS2X said:
EDIT: Is there any way to get my files off the internal SD without being able to turn the phone on? can't get into download mode or recovery because the phone just turns off 3-4 seconds in
Click to expand...
Click to collapse
no.
try this test, when it goes through the bootloop, keep the power button depressed w/out releasing it and see if it displays the same charactersistics as your bootloops, also count the seconds each situation has, if they are the same then the problem is the sticky power button
As posted earlier, http://forum.xda-developers.com/showthread.php?t=1801226
It's the power button that is messed up, hands-down.
Try and try and try and sooner or later you'll probably get it. I could care less about the phone as I have a replacement coming, but I wanted to get my data off of it.
Open up you're phone if you're comfortable and mess with the power button directly some, either you're going to fix it long enough to get your data or break it completely...doesn't really matter at this point.
Just put the battery in and right after the phone vibrates hold the power button and see how lucky you are at getting it to last the full 8+ seconds instead of the usual 2 before it reboots and vibrates.
Once you get it working, don't touch that *****. As gently as possible, set it down and get your USB in, turn on Mass USB and debugging and copy your stuff. Put the timeout to the max or download an app so you don't have to touch the power button ever and just touch the screen every once in awhile if you don't have an app. Don't forget to reset your flash counter and reflash stock ODIN if you're rooted or on anything custom (Use ADB to reboot through all this)
Honestly...I let my phone restart on its own for a total of like 8 hours (I didn't care and honestly hoped it burnt up or something and was completely fried) and I watched it for a good chunk of the time and it never booted up on its own. After I took it apart twice and beat the hell out of the power button a good while I finally got it to work.
Repeatedly mashing it after 'attempting' to clean it and then pulling the battery/reinserting and seeing if it worked is how I finally got mine.
Now it's just a paper weight till the new one comes.
Edit: I find it weird that a lot more of these problems are popping up. I noticed a bunch of threads on various sites towards the end of June that had popped up and now some are here too recently. I guess the Skyrocket's cheap-feeling Power Button is indeed...cheap.
It isn't the power button. I posted this problem months ago and took it in to a device center. It was actually a battery issue where it connects into the phone. The charge going into the phone doesn't stick, causing it to flicker power and thus restart constantly. They never ended up getting my old one to turn on and never saw it was rooted and what not. Ended up just giving me a refurbished one.
Sent from my SAMSUNG-SGH-I727 using xda premium
aceownstheworld said:
It isn't the power button. I posted this problem months ago and took it in to a device center. It was actually a battery issue where it connects into the phone. The charge going into the phone doesn't stick, causing it to flicker power and thus restart constantly. They never ended up getting my old one to turn on and never saw it was rooted and what not. Ended up just giving me a refurbished one.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
well if it never turns on, then its not the sticky power button problem, the sticky power button has a reboot symptom at a consistent interval
hd2k10 said:
As posted earlier, http://forum.xda-developers.com/showthread.php?t=1801226
It's the power button that is messed up, hands-down.
Try and try and try and sooner or later you'll probably get it. I could care less about the phone as I have a replacement coming, but I wanted to get my data off of it.
Open up you're phone if you're comfortable and mess with the power button directly some, either you're going to fix it long enough to get your data or break it completely...doesn't really matter at this point.
Just put the battery in and right after the phone vibrates hold the power button and see how lucky you are at getting it to last the full 8+ seconds instead of the usual 2 before it reboots and vibrates.
Once you get it working, don't touch that *****. As gently as possible, set it down and get your USB in, turn on Mass USB and debugging and copy your stuff. Put the timeout to the max or download an app so you don't have to touch the power button ever and just touch the screen every once in awhile if you don't have an app. Don't forget to reset your flash counter and reflash stock ODIN if you're rooted or on anything custom (Use ADB to reboot through all this)
Honestly...I let my phone restart on its own for a total of like 8 hours (I didn't care and honestly hoped it burnt up or something and was completely fried) and I watched it for a good chunk of the time and it never booted up on its own. After I took it apart twice and beat the hell out of the power button a good while I finally got it to work.
Repeatedly mashing it after 'attempting' to clean it and then pulling the battery/reinserting and seeing if it worked is how I finally got mine.
Now it's just a paper weight till the new one comes.
Edit: I find it weird that a lot more of these problems are popping up. I noticed a bunch of threads on various sites towards the end of June that had popped up and now some are here too recently. I guess the Skyrocket's cheap-feeling Power Button is indeed...cheap.
Click to expand...
Click to collapse
Alright, I will definitely try and try until the phone turns on before taking it into the store. This has actually been happening for a few days now but I didn't really care too much because I was really busy and I thought since it turns on after a few tries, I'll just take the files off and return it to stock later. Also, yesterday someone gave the suggestion of repeatedly jamming the power button and that actually worked twice but after that it never worked again.
Is it possible to remove the back and fix the power button without voiding the warranty (are there any stickers)?
EDIT: I have it disassembled right now, what exactly should I do to the power button? I tried clicking it a few times and blowing at it nd I put the battery in but still the same thing
EDIT 2: Umm what looks to be the litmus paper on the inside is red.. the phone has never come in contact with water so how is this possible..
EDIT 3: Every housing I've seen online (4-5) has a red square on the housing so I'm guessing it comes in red by default? Either way I'm taking it to Rogers right now, they said I could have a refurbished for 35 or I can just repair this one so I'm just going to repair it and hopefully the files will be preserved.
My only concern.. the phone running Juggernaut 5 right now LOL and the internal SD is full of rom zips and kernels so hopefully they don't look at that, or don't care. Once they repair the phone, what can they really do tho? Break it again nd send it back? haha
SGS2X said:
Alright, I will definitely try and try until the phone turns on before taking it into the store. This has actually been happening for a few days now but I didn't really care too much because I was really busy and I thought since it turns on after a few tries, I'll just take the files off and return it to stock later. Also, yesterday someone gave the suggestion of repeatedly jamming the power button and that actually worked twice but after that it never worked again.
Is it possible to remove the back and fix the power button without voiding the warranty (are there any stickers)?
EDIT: I have it disassembled right now, what exactly should I do to the power button? I tried clicking it a few times and blowing at it nd I put the battery in but still the same thing
EDIT 2: Umm what looks to be the litmus paper on the inside is red.. the phone has never come in contact with water so how is this possible..
EDIT 3: Every housing I've seen online (4-5) has a red square on the housing so I'm guessing it comes in red by default? Either way I'm taking it to Rogers right now, they said I could have a refurbished for 35 or I can just repair this one so I'm just going to repair it and hopefully the files will be preserved.
My only concern.. the phone running Juggernaut 5 right now LOL and the internal SD is full of rom zips and kernels so hopefully they don't look at that, or don't care. Once they repair the phone, what can they really do tho? Break it again nd send it back? haha
Click to expand...
Click to collapse
I would just fiddle with the power hoping for the best.
As far as your roms go, I doubt it'll be a problem. A) They're not going to get the phone to turn on anyway. They're probably just going to repair the button and reflash before they even check anything. Either way, like you said, the worst case is they find it but you already have your replacement...maybe they'll try charging you the phone, throw a hassle and offer to cancel your service and tell them to send you your "unwarranteed phone" and the button repair bill and they can have theirs back. I don't seem them getting you for it. All they might do is check the flash counter which probably hasn't been tripped if you didn't use a bad ODIN.
Juggernaut 5
Click to expand...
Click to collapse
i never seen this rom, where did u get it, is it for the skyrocket, if not could be your prob
hd2k10 said:
I would just fiddle with the power hoping for the best.
As far as your roms go, I doubt it'll be a problem. A) They're not going to get the phone to turn on anyway. They're probably just going to repair the button and reflash before they even check anything. Either way, like you said, the worst case is they find it but you already have your replacement...maybe they'll try charging you the phone, throw a hassle and offer to cancel your service and tell them to send you your "unwarranteed phone" and the button repair bill and they can have theirs back. I don't seem them getting you for it. All they might do is check the flash counter which probably hasn't been tripped if you didn't use a bad ODIN.
Click to expand...
Click to collapse
vincom said:
i never seen this rom, where did u get it, is it for the skyrocket, if not could be your prob
Click to expand...
Click to collapse
Flash counter is at 0, I checked when I managed to get into Download mode before it stopped working altogether. Juggernaut 5 is a rom for the Hercules (T989) and that's not the problem, I've used it before and I only flashed it after the problem started because I thought ICS was the problem, but it stayed even after flashing Juggernaut.
so what did u end up doing, fool around w/the power button or did u bring it in

Sending Out An S.O.S for my Bricked Infuse

n I had my infuse in my pocket and when I pulled it out it shut down on me, and ever since then all it does is reboot all the time. When I pull out the battery and put it back in, then phone just turns on by it self. When I try to charge it it shuts off then turns back on with the charging symbol and it does it over and over. I cant put put it and download mode and I can't put it into flash mode either. I brought it too two places to get it fixed and one person says the board is fried and the other tells me that it's bricked and he can't fix it..
http://forum.xda-developers.com/showthread.php?t=1872444
He people you took it to are terrible repair people...its just a bad power button...like the actual inner button (not the part you can see) is stuck down
Some one haduck by rapidly pressing the power button to get it unstuck
Another guy took his phone apart and sprayed the power button with compressed air to remove dust and other things that may be getting it stuck
And another guy replaced his with one from a different infuse
And another guy sent his in to some repair shop for I think $50 to get it fixed
Sent from my HTC PH39100 using Tapatalk 2
mg2195 said:
He people you took it to are terrible repair people...its just a bad power button...like the actual inner button (not the part you can see) is stuck down
Some one haduck by rapidly pressing the power button to get it unstuck
Another guy took his phone apart and sprayed the power button with compressed air to remove dust and other things that may be getting it stuck
And another guy replaced his with one from a different infuse
And another guy sent his in to some repair shop for I think $50 to get it fixed
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
\
Thank you guys, I'm gonna go and pick it up right now and check it out I will keep you guys posted ..
So, I got my phone back and I took it apart myself. I tried blowing out the phone with a dust remover spray and pressing the button to un-stick it and nothing happened. So I think it might be the actual button that is connect to the board on the phone. I don't know who to bring it too down here, cause it seems that everyone is afraid to change it for me. So I guess my Infuse is no longer in service and I'll be looking for another phone
Update, so it is the power button, I had booting up, but then it started to boot loop again. I just need to get the button replaced.
jazenf said:
So, I got my phone back and I took it apart myself. I tried blowing out the phone with a dust remover spray and pressing the button to un-stick it and nothing happened. So I think it might be the actual button that is connect to the board on the phone. I don't know who to bring it too down here, cause it seems that everyone is afraid to change it for me. So I guess my Infuse is no longer in service and I'll be looking for another phone
Update, so it is the power button, I had booting up, but then it started to boot loop again. I just need to get the button replaced.
Click to expand...
Click to collapse
Check out link in op of this thread $30.00 plus shipping.
http://forum.xda-developers.com/showthread.php?t=1756467
Good work by mg to recgonize the symptoms.
Not relevant to op, but something for everyone to consider: using a software tool to turn off your screen instead of power button.
If you put an icon on your homescreen to turn the display off (without pressing the power button), you save up to 50% of the cycles on your power button (or somewhat less if you tend to let the screen timeout instead of turning it off).
It can easily be done with tasker. The tasker command is called "System Lock" (sounds ominous, but just turns off the screen). I have that on my home screen, just above the home button. That makes it an easy two press maneuver to turn of the screen.
It looks like there are some free Apps on the market that do the same thing. Here's one (I haven't tried this one myself, just posting for info)
https://play.google.com/store/apps/details?id=com.seltzer.screen_off_widget&hl=en
electricpete1 said:
Good work by mg to recgonize the symptoms.
Not relevant to op, but something for everyone to consider: using a software tool to turn off your screen instead of power button.
If you put an icon on your homescreen to turn the display off (without pressing the power button), you save up to 50% of the cycles on your power button (or somewhat less if you tend to let the screen timeout instead of turning it off).
It can easily be done with tasker. The tasker command is called "System Lock" (sounds ominous, but just turns off the screen). I have that on my home screen, just above the home button. That makes it an easy two press maneuver to turn of the screen.
It looks like there are some free Apps on the market that do the same thing. Here's one (I haven't tried this one myself, just posting for info)
https://play.google.com/store/apps/details?id=com.seltzer.screen_off_widget&hl=en
Click to expand...
Click to collapse
Here is one that is recommended often, I haven't used it though.
https://play.google.com/store/apps/details?id=com.smart.swkey
Hey guys, I fixed my infuse.
I took that bad boy apart and cleaned out the power button now its working like brand new . Thank you for all you help and happy flashing .
*Fi Mi JellyBean Gone Paro*

i727 skyrocket stuck in continous reboot loop and doesnt get past start screen

I I have a Samsung Galaxy S2 Skyrocket i727 (with stock firmware and ROM), i dont have a SD card and not too many apps installed either, maybe 10-15 apps at most. Today while the phone was in my pocket it just went into this continous reboot cycle, it reboots, gets to the AT&T splash screen and then reboots again and then this goes on forever.
I googled the hell out of this issue but cant seem to find a solid solution and hence hoping u guys can help.
I cannot get into recovery mode cause it never gets past the splash screen
I cannot seems to perform a hard reset (power button + volume key) , it just reboots again.
I tried plugging the phone and connecting via USB but it doesnt help either, it reboots before the computer can detect the phone.
Hope u guys can help ? life without android is no fun...
Stuck power button
Sent from my SGH-I727 using Tapatalk 2
The_Blue_Waffle said:
Stuck power button
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
anyway to fix it or m i close to a paperweight by now. I do not have warranty on this phone
I explored the stuck power buton option and lightly banged the phoen around in hopes that it would let loose but no luck.
The_Blue_Waffle said:
Stuck power button
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
This. Google "stuck power button Skyrocket" for info on a fix.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
needle arounf the edges of the button works majority of the time if not then have fun with the google search
Sent from my SAMSUNG-SGH-I727 using xda premium
T.J. Bender said:
This. Google "stuck power button Skyrocket" for info on a fix.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Hulk Smash
Try a different battery
alienn4hire said:
Try a different battery
Click to expand...
Click to collapse
...
A new battery will do nothing to fix a stuck power button.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
crashpsycho said:
needle arounf the edges of the button works majority of the time if not then have fun with the google search
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I had this same issue with my LG Phoenix, I tried the needle around the power button, and that popped it back to normal. Apparently I held the button down to a side and it got stuck even though the actual button part was in it's "normal," position.
However it did reboot several more times after I got it unstuck. I did remove the back & battery, & unplugged it. Let it sit for a few minutes, after that I put the USB cable back in, then pressed the power button, put the battery back in and pressed the button again, and it went through the normal reboot process.
Just wanted to give you guys an update that i started cleaning the part around the edges as some folks suggested and that failed. then tried smacking around and blowing air into and that failed. Then took the entire phone apart and cleaned it several times using different techniques and sad to say that it all failed and i m SOL.
Bummer but it is what it is and i was quiet happy with that phone.
asfi99 said:
Just wanted to give you guys an update that i started cleaning the part around the edges as some folks suggested and that failed. then tried smacking around and blowing air into and that failed. Then took the entire phone apart and cleaned it several times using different techniques and sad to say that it all failed and i m SOL.
Bummer but it is what it is and i was quiet happy with that phone.
Click to expand...
Click to collapse
Did you offer up Bacon to the phone as a snackrifice?
I'm sorry that none of these options worked out for you.
Its very easy to open I changed a motherboard for a hard bricked i727 very easy to change power button or unstuck it
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
intelxtreme said:
Its very easy to open I changed a motherboard for a hard bricked i727 very easy to change power button or unstuck it
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Where does one find a power button for the skyrocket (the one attached to the motherboard)? The closest thing I could find was this:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-skyrocket-power-button-repair/
It is a repair service though and I live in Canada, I would prefer if I could just order that part. I have been to few repair shops that cant do anything because this power button is hard to find. I opened up the motherboard and the power button clicks fine, so I think it probably has to be replaced.
Freezing the phone
I had the same issue, came here and read all the things about the stuck power button and needing to replace whatever is beneath it. My friend works in aerospace and had told me about one of the things they need to worry about is temperature causing wire shrinkage due to temperature. For whatever reason, I decided to use that logic and throw my phone in the freezer wrapped in a dry rag. 30min later and the phone finally worked after 8 hours of the boot loop/no boot. That was around November and I haven't had an issue with it since (until today, but it is a different issue).
nobel662 said:
I had the same issue, came here and read all the things about the stuck power button and needing to replace whatever is beneath it. My friend works in aerospace and had told me about one of the things they need to worry about is temperature causing wire shrinkage due to temperature. For whatever reason, I decided to use that logic and throw my phone in the freezer wrapped in a dry rag. 30min later and the phone finally worked after 8 hours of the boot loop/no boot. That was around November and I haven't had an issue with it since (until today, but it is a different issue).
Click to expand...
Click to collapse
can any one else confirm this? my phone keeps shutting off. when the screen is black, itll vibrate every second. im assuming its another stuck power button.
Boot loop!
thilly said:
can any one else confirm this? my phone keeps shutting off. when the screen is black, itll vibrate every second. im assuming its another stuck power button.
Click to expand...
Click to collapse
I have just fixed mine!!!!
There is a little battery on the circuit board when you take apart the phone. It looks like a small watch battery. Top side is and bottom side are opposite polarities.
I had the exact same symptom. Sometimes just pressing the power button momentarily would bring up the power down menu, then I knew to press it a bunch of times because it was stick. If I didn't eventually it would turn off and vibrate constantly. It kept getting worse.
I measured with an ohm meter and the button itself seems fine so I figured maybe the digital logic relating to the button itself is faulty. So I shorted the little battery on the board (do this only for a brief period, no more than 1s) and put it back together.
Its behaving perfectly normally. I was also getting weird artifacts during video playback before, kind of like what failing solder would do on a bga gpu. It fixed that too.
So I think its similar to that problem some laptops have, where it wont turn on until you remove the battery, hold the power button down a couple times, and then plug it in. It seems a complete circuit discharge fixed this problem at least for me.
If people are interested I can try to find a picture
removed link
In that picture its the silver shiny metal circle. To short it you connect the bottom soldered part to the metal plate on top of the battery. This comlpetely drains all circuits.
So I think a lot of these problems are caused by a phantom charge. In any sense, Im very very happy
Also this could explain why the fridge method worked. Cooling the battery can significantly drop its charge, however I would advise against the cooling method if possible.
EDIT: blah cant post links... if anyone needs the image pm me your email
coolerbean said:
Where does one find a power button for the skyrocket (the one attached to the motherboard)? The closest thing I could find was this:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-skyrocket-power-button-repair/
It is a repair service though and I live in Canada, I would prefer if I could just order that part. I have been to few repair shops that cant do anything because this power button is hard to find. I opened up the motherboard and the power button clicks fine, so I think it probably has to be replaced.
Click to expand...
Click to collapse
You'd need to find a friend or local electronics repair shop, but I ordered some here:
http://www.etradesupply.com/oem-samsung-galaxy-s-ii-skyrocket-sgh-i727-power-button.html.
The buttons are $0.99 USD if you buy 2 or more ($1.05 CAD), but 5-7 day business shipping is like $16.99. Still cheaper than a replacement phone, and it's an easy fix for an electronics person or electronics/tv/computer repair shop... At the rate these power buttons have had reported failures, and for the price, I'd get a couple of them in case the replacement fails in the future...
If my wife keeps squeezing the power button on her phone when some crappy app she has wigs out, I'll be needing my second button sooner rather than later...
why when one person says it something everyone band wagons on that idea. i actually had the same issue my skyrocket couldn't go pass the "samsung" screen. all i did was flash a new rom or i just restored an old backup
phillytothemax said:
why when one person says it something everyone band wagons on that idea. i actually had the same issue my skyrocket couldn't go pass the "samsung" screen. all i did was flash a new rom or i just restored an old backup
Click to expand...
Click to collapse
Then it was user error or a bad flash. And that's software, not hardware.
Skyrocket power buttons are known to fail. I believe Samsung has even acknowledged this.
When your phone randomly goes into a 1-second vibration cycle, sometimes showing the reboot menu beforehand without pressing the button, more than likely it's the power button that has either failed or is sticking.
With my wife's phone, the button was not sticking, and usually lightly tapping the phone at the right angle on your lap or the counter would break the vibration cycle and let it boot up, until the next random power button press and vib cycle would happen.
Button replaced, same exact ROM, and problem gone. :thumbup:
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
asfi99 said:
I I have a Samsung Galaxy S2 Skyrocket i727 (with stock firmware and ROM), i dont have a SD card and not too many apps installed either, maybe 10-15 apps at most. Today while the phone was in my pocket it just went into this continous reboot cycle, it reboots, gets to the AT&T splash screen and then reboots again and then this goes on forever.
I googled the hell out of this issue but cant seem to find a solid solution and hence hoping u guys can help.
I cannot get into recovery mode cause it never gets past the splash screen
I cannot seems to perform a hard reset (power button + volume key) , it just reboots again.
I tried plugging the phone and connecting via USB but it doesnt help either, it reboots before the computer can detect the phone.
Hope u guys can help ? life without android is no fun...
Click to expand...
Click to collapse
I have a repair shop and i fix these issues with no problem. the only issue im located in Puerto Rico. when the power button gets stuck is because of heavy use, a fall or something that makes a lot of pressure to it and the copper contacts inside the button stay making contact. this is know to happen to i727-i717-i997-i897 and some other galaxy s1 s2 models.
i attached the picture of the power button.

[Q] Power button broken, need help/advice

Hello,
So last week I woke up and my power button stopped working. I looked around for similar issues and found quite a few stores selling a power flex cable (I attached a picture of it because I am a new member and cannot post the URL for the site, but it's easily found using google)
Since it was only six dollars, I ordered it without much thought. Just looking at the cable, it looks like it would fit into a connector rather than needing soldered onto a board, so I figured it would be pretty simple.I finally received it, and after looking around at a bunch of teardowns and the service manual, I do not see this cable or connection anywhere I was going to just open it up and check it out, but didn't want to risk not being able to turn the phone back on.
I am looking for advice! Specifically, if there is a way to power the phone back up without having to use the actual power button, I'd love to know.
FWIW, my phone is not rooted and factory stock
Thank you!
Bumping because I would really like to get this fixed! Not sure if this may go over better (or would be appropriate) on the i9300 forum.
Any help would be awesome!
Back up your phone in the way you see fit. Try and fix button. If you fix it yer done. If not buy a jig. The jig will get you into odin mode. Plug phone into computer. In odin make sure that auto reboot is checked. Flash something like a recovery. Once it finishes flashing it will auto reboot. Enjoy.
Use the home button to wake and a gesture gesture app to put a custom action to turn the screen off. Or put a screen off action on your home screen. Wherever you want
Sent from my SCH-I535 using xda app-developers app
That part has to be mislabeled. I just took my phone apart and there is no way that part will fit. Observe:
mentose457 said:
That part has to be mislabeled. I just took my phone apart and there is no way that part will fit. Observe:
Click to expand...
Click to collapse
Ugh, that is what I thought and was afraid of. I have no idea why in the world they are even available, lol.
I'll buy a jig just in case the phone somehow turns off and I am SOL.
Anyways, I appreciate everyone's input! TY

Categories

Resources