Database Info

TWRP version issue : can't install cyanogenmod

Hello,
I have a perfectly working moto G 4g with cyanogenmod, and did the install very easily the first time. I am stoked with it so when my mother asked me for a new phone I got another MotoG 4G, and went directly to install TWRP and cyanogenmod... BUT :
- when I want to flash Cyanogenmod build zip, TWRP tells me the version is not supported by this cyanogen build.... apparently it wants version 0x411A and nothing else. The only version available on TWRP website is the newest 0.3.2.0 ....
- I have tryed another twrp version found online (a 2.7.8 not official) and it fails again to install Cyanogenmod, saying the TWRP version is not correct.
Where can I get the correct 0x411A version of TWRP ? Or is the message actualy is about something else ?
Best regards and thanks in advance for your help.

I was confusing Bootloader version and TWRP version. I used a tool found on XDA that has updated my bootloader.
Then i was able to install cyanogenmod but was stuck on the logo for the first boot.
Updated TWRP to the latest one and trying again, flashed darvin cache, and i am flashing nightly cyanogen+gapps.
I hope it'll work this time

problem installation lineageos

Hi all, i have a problem whan i install lineage os, i don't have any system on my oneplus one and i want install lineage but when the installation has finished, my phone restart and freeze on logo one plus one android powered.
if you have a solution ;D
good night

LucasJahier said:
Hi all, i have a problem whan i install lineage os, i don't have any system on my oneplus one and i want install lineage but when the installation has finished, my phone restart and freeze on logo one plus one android powered.
if you have a solution ;D
good night
Click to expand...
Click to collapse
Which firmware were you on? Which recovery you used?
Did you tried previous lineage os nightly's?

I don't know what firmware i m and i have try with the latest nighly release. And i use the latest version of twrp

LucasJahier said:
I don't know what firmware i m and i have try with the latest nighly release. And i use the latest version of twrp
Click to expand...
Click to collapse
Go to setting > about phone and see Baseband version.
If you're coming from CM13.1 make sure to wipe everything except internal storage.
Download the ROM again if possible (the version you have downloaded may be corrupted) from the Lineage os official site and gapps(micro or pico).
Flash the ROM first and then gapps.
Reboot your device.
If you want the Root access download the Su add-on from the Lineage website also.
Hope it will work.
Let us know.
Thanks.

Re
Re,
Sorry... but i don't have any os in my oneplus one... he is empty exept zip the lastest version of official website and zip of gapps.
Thank you

Just to be sure I do this right...

Hi. this is in regards to the rom here:
Dual/Single] HaoZeke's LineageOS [8-4-17]
And my device is a Sony Xperia Z5 model 6653 currently running a modified 32.3 A.0.376 with a patched Kernel running 7.0 and I am rooted
.I'm kinda new to the modifying of droids. I've had one since ever having a phone, but just got into tweaking them.
I just want to be sure I'm doing this right because sometimes the boot image is attached to the zip file or include in the package but I'm assuming we download
it separately here, right? I'm only guessing since I see it located by itself in the dl list. Also, this IS the kernel too right? Or do I have to download that as well somewhere?
I had an image but it's not taking them I guess. Basically the download screen, all the builds and the boot image. I would take the top build as it's newest and the boot image?
Also, flash twrp from that source after flashing the gapps?
In fact what is the order? Rom, then Gapps, then Boot (if we use that boot file) and then finally TWRP?
And Magisk doesn't have to be flashed I think but just gotten in the play store provided this Rom is already rooted?
Also, wanted to be sure this is correct. ARM... 64 for the GAPPS?
Thanks for your help in advance. I appreciate it. I've had a ton of issues with other lineage 7.1 builds and issues with error 7 . I've rewritten updater scripts to no avail, deleting the asserts and nothing . This is the last one I'm trying as it sounds the coolest anyway. Thanks again.

Hello,
ARM64 for gapps, and proper order of flashing is : rom, gapps, boot optionally and then supersu or whatever you want.
And for me deleting asserts line always work, i will send you link with already modified that updater script.

Install Unofficial LineageOS rom on Honor 8

Hi I'm searching for someone who has installed the new unofficial release of LineageOS rom for Honor 8. The first time i tried to install it, I had different issues like an error (error code 7) on twrp. I want to know what are the risks of the installation and if I can return to stock EMUI whenever i want and when the phone gets bricked (no OS installed, only twrp and bootloop on honor logo). Thanks

davide.melkior said:
Hi I'm searching for someone who has installed the new unofficial release of LineageOS rom for Honor 8. The first time i tried to install it, I had different issues like an error (error code 7) on twrp. I want to know what are the risks of the installation and if I can return to stock EMUI whenever i want and when the phone gets bricked (no OS installed, only twrp and bootloop on honor logo). Thanks
Click to expand...
Click to collapse
Well we did it several times. If u had a desire to boot lineage os . Welcome to world of custom roms .
We are glad to help u and plz ask ur query in next post.

unable to install twrp over 3.1.1.1 on mi4c (trying to go from android 7.1 to 8 or 9)

Hey everyone,
i usually don't post questions but i've been on pretty much every forum the web has to offer and am still stuck so i'll try my luck here.
i'm currently running lineage 7.1 on my mi4c, i've used another phone for a while but now that my mi4c has a new battery i wanted to start using it again, is also decided this would be the time to update it to android oreo or pie, this however seems to be impossible.
i can only use twrp up to 3.1.1.1, all higher (and unofficial versions) will not boot via fastboot 'dtb not found' or when flashed via older twrp will freeze on boot screen.
whenever i try to install a new rom it tells me 'error code 7', when i remove the 'assert' lines in the update it gives me 'error code 6'
my device is unlocked, i have checked this in fastboot.
do i have to install miui again before installing another rom? do i have to go back to the standard recovery? i'm currently running out of ideas and hope you guys might be able to help me. maybe i'm overlooking something simple.
kind regards,
Monstreys

Hi! I don't know if this is a coincidence or not, but I was about to start a similar thread.
I try to do exactly what you are doing. I want to install LineageOS 16, unofficial ROM.
For this you need a newer TWRP, like 3.2.3.0, but it doesn't work 'dtb not found' like you said. I found out that this doesn't work because you need to have nougat bootloader. Most probably you have lollipop bootloader like I have, and thats why newer versions of TWRP are not working. I think the only way to update your bootloader to a nougat one is to flash the latest MIUI ROM. But, unfortunately, when you do that the bootloader gets locked, and I can't unlock it via MiUnlock due to Error:20091 when I try to link the phone to the Mi account. In MiUnlock it gives me the "this account cannot unlock the phone" or something like that.
Now I removed the "assert" lines from my rom and flashed it without the error 7 or 6. Some error still apears, but it also apears when I flash LineageOS 14.1, and that version is working even with those 2 errors I can't remember during flash.
After I flashed LineageOS, I flashed gapps and then superSU, and now my mi4c is stuck on mi logo for about 20 minutes, and I think it will remain that way.
So, there are 2 things we need to solve. We need to find a way to install latest MIUI without relocking the bootloader because I can't unlock it via MiUnlock, or to find out why after I flashed LineageOS 16 it gets stuck on MI logo.

I think I found the solution. Do exactly what this guy is doing here and it might work.
https://forum.xda-developers.com/showpost.php?p=78640737&postcount=63
I followed that guy instructions and I managed to install TWRP 3.2.3.0 and LineageOS 16, and it booted. Now I am at the setup part but it has very big lag...

makaveli97 said:
I think I found the solution. Do exactly what this guy is doing here and it might work.
https://forum.xda-developers.com/showpost.php?p=78640737&postcount=63
I followed that guy instructions and I managed to install TWRP 3.2.3.0 and LineageOS 16, and it booted. Now I am at the setup part but it has very big lag...
Click to expand...
Click to collapse
i
i was unable to install the patch file, this nonetheless fixed my problem, thanks!!

if above not working, another method to do it based on my method.
https://forum.xda-developers.com/showpost.php?p=81573941&postcount=199

makaveli97 said:
I think I found the solution. Do exactly what this guy is doing here and it might work.
https://forum.xda-developers.com/showpost.php?p=78640737&postcount=63
I followed that guy instructions and I managed to install TWRP 3.2.3.0 and LineageOS 16, and it booted. Now I am at the setup part but it has very big lag...
Click to expand...
Click to collapse
My MI4C has been successfully flushed into lineage-17.1-20200220-UNOFFICIAL-libra.zip. It has been updated on TWRP 3.1.1 and keeps reporting error 7, and then abandoned TWRP3.1.1 and flashed into OrangeFox-R10.0-1-Stable-libra.zip After brushing libra-aqua_firmware_7.2.9.zip on this REC, you can flash lineage-17.1. I do n’t think it will be impossible to refresh because of partition problems. If you only need to upgrade lineage-17.1, you can refer to this method.:good::good:（Translation is not easy to use）

celrau said:
There is a 3.2.x around. If you don't want to bother go in the zip, /META-INF/com/google/android/ and delete the first lines (the ones starting with "assert") from updater-script, save and flash again.
Click to expand...
Click to collapse
rianawirawan said:
Right now, i'm using 3.1.1 -1 btw
It's latest twrp ver from official
Click to expand...
Click to collapse
TWRP-20190418-3.3.0.0-libra.img for the Xiaomi Mi 4c, by GuaiYiHu :
https://androidfilehost.com/?fid=1395089523397945946
Latest firmware for the Xiaomi Mi 4c libra :
https://github.com/XiaomiFirmwareUp...iui_MI4c_V10.1.1.0.NXKCNFI_13b9b312d0_7.0.zip