Hello. So a friend has a mate 7 and he somehow soft bricked it. He told me that he tried to update it.
It is stock(no root, locked bootloader etc)
When i turn it on i get the rescue mode screen, saying Attention! Please update system again
Error!
Func NO : 13(FUNC_BOOT_FLASH)
Error NO : 1
I cant ender recovery mode(black screen). I can only ender Fastboot mode.
I tried to reflash recovery.img and boot.img(i got the files using huawei extractor. got them from a 4.4 rom i found),
but when i type any of these commands i get this error
FAILED (remote: Command not allowed)
I installed adb drivers and Hisuite.
I would unlock the bootloader, but i cant access some of the needed codes because the phone wont boot.
I also tried to force update from a sd card, but nothing happens. The phone just boots in rescue mode and just hangs there.
Any help would be apreciated. Thanks!
Ok so after some hours of googling i think the only was to unbrick it, is to unlock the bootloader and then flash via fastboot.
The problem is that there is no way to get the product id. The phone cant boot or do anything. It can only start in rescue and fastboot mode.
Any ideas?
Hi everyone,
my honor 8 lite is stuck at the caution message "your device has been unlocked and can't be trusted" I tried to install stock firmware with force update mode (volume+ - and power button) but i got "software install failed" and tried the adb method by flashing (boot.img, recovery.img and system.img) and it didn't work as well.
so anyone has idea what's wrong???
sorry for my bad language....
Hello can u help me with hard brick, i stucked in error mode no : 8 hifi image and no 1: security verify failed
I booted to fastboot once, then unlocked bootloader but then its not past me to the fastboot anymore.
I have honor 8 FRD-l09
Normally, you can use HiSuite to unbrick your phone.
I seriously doubt that unlocking the bootloader did that to you. What firmware/model were you on before this happened.
I know there are many posts about unbricking Honor 8 but any of them couldn't help me.
I have FRP AND Bootloader locked :crying:
I had RROS and fingerprint scanner wasn't working because off I hassled with some system files so I wanted to reset my phone. I tried to use dload but it only locked my bootloader and I don't maybe have the code (I'll still try to find it).
So for now I don't have any OS to boot to but I can get to eRecovery (which can't help me) and to force download mode (via three buttons method) and also to fastboot/ rescue mode (where it says phone locked, frp lock) so what I should do?
I have the same problem, Bootloader locked, FRP Locked, phone bricked, erecovery can't find a software, recovery sdcard say all software is incompatible with this device. I had FRP locked, bootloader unlocked and phone unbricked, I read on some thread to unlock FRP i have to lock bootloader and unlock again. Now I'm completely locked.
Few minutes ago I lost 15 credits on DC-Unlocker to know that is for unbricked devices only.
What can I do now?
karnasw said:
I have the same problem, Bootloader locked, FRP Locked, phone bricked, erecovery can't find a software, recovery sdcard say all software is incompatible with this device. I had FRP locked, bootloader unlocked and phone unbricked, I read on some thread to unlock FRP i have to lock bootloader and unlock again. Now I'm completely locked.
Few minutes ago I lost 15 credits on DC-Unlocker to know that is for unbricked devices only.
What can I do now?
Click to expand...
Click to collapse
I survived! But because Huawei is *can't say it here*, I can't root it with magisk and twrp anymore.
I did this:
1. put rollback package to ext. sdcard /dload (and /dload must be in the root of sdcard)
2. Put sdcard into the phone and press all three buttons (vol up + vol down + power) and it will install the rollback package.
3. Shut down the phone and remove sdcard
4. Replace the rollback package with the full ota package.
5. Do same as in step 2 so it will install Android
6. Now you have working phone with locked bootloader
What version of EMUI you had before brick, mine is EMUI 8, what rollback i should use?
karnasw said:
What version of EMUI you had before brick, mine is EMUI 8, what rollback i should use?
Click to expand...
Click to collapse
I don't know, I used Rollback to android 6 but now i'm stuck at android 7 and emui 5.0 or 5.1
hey man you can use Multi Tools V8 . in this tools go unbrick option and do it
i have same issue .how to connect device with multitools v8 .because device stuck on (your device is booting now) not goto in fastboot.
Hello,
so I tried to update my Honor 6x (unlocked bootloader) to EMUI 8 and after twrp finished i installed Magisk too cuz I thought it works but now im always getting an ERROR MODE screen.
Here is the error:
ERROR MODE
Attention!
Please update system again
Error!
Func NO : 11 (recovery image)
Error NO :2 (load failed!)
I tried booting into erecovery still shows same error, only thing that works is fastboot mode.
if i do vol key up + power it thinks i want to boot normally (was like that before),
i tried flashing the firmware manually but cant find the correct firmware.
doesn't change anything
Model: Honor 6x BLN-L21 European
Fixed it by flashing in DC Phoenix.