I know there are many posts about unbricking Honor 8 but any of them couldn't help me.
I have FRP AND Bootloader locked :crying:
I had RROS and fingerprint scanner wasn't working because off I hassled with some system files so I wanted to reset my phone. I tried to use dload but it only locked my bootloader and I don't maybe have the code (I'll still try to find it).
So for now I don't have any OS to boot to but I can get to eRecovery (which can't help me) and to force download mode (via three buttons method) and also to fastboot/ rescue mode (where it says phone locked, frp lock) so what I should do?
I have the same problem, Bootloader locked, FRP Locked, phone bricked, erecovery can't find a software, recovery sdcard say all software is incompatible with this device. I had FRP locked, bootloader unlocked and phone unbricked, I read on some thread to unlock FRP i have to lock bootloader and unlock again. Now I'm completely locked.
Few minutes ago I lost 15 credits on DC-Unlocker to know that is for unbricked devices only.
What can I do now?
karnasw said:
I have the same problem, Bootloader locked, FRP Locked, phone bricked, erecovery can't find a software, recovery sdcard say all software is incompatible with this device. I had FRP locked, bootloader unlocked and phone unbricked, I read on some thread to unlock FRP i have to lock bootloader and unlock again. Now I'm completely locked.
Few minutes ago I lost 15 credits on DC-Unlocker to know that is for unbricked devices only.
What can I do now?
Click to expand...
Click to collapse
I survived! But because Huawei is *can't say it here*, I can't root it with magisk and twrp anymore.
I did this:
1. put rollback package to ext. sdcard /dload (and /dload must be in the root of sdcard)
2. Put sdcard into the phone and press all three buttons (vol up + vol down + power) and it will install the rollback package.
3. Shut down the phone and remove sdcard
4. Replace the rollback package with the full ota package.
5. Do same as in step 2 so it will install Android
6. Now you have working phone with locked bootloader
What version of EMUI you had before brick, mine is EMUI 8, what rollback i should use?
karnasw said:
What version of EMUI you had before brick, mine is EMUI 8, what rollback i should use?
Click to expand...
Click to collapse
I don't know, I used Rollback to android 6 but now i'm stuck at android 7 and emui 5.0 or 5.1
hey man you can use Multi Tools V8 . in this tools go unbrick option and do it
i have same issue .how to connect device with multitools v8 .because device stuck on (your device is booting now) not goto in fastboot.
Related
Here my tips for rooting of Huawei Honor 8 Lite... Utils and resources prepared:
https://1drv.ms/f/s!AgEr-N6c2tdUh68_GbgIAvD99y6_EQ
ROOTING HUAWEI HONOR 8 LITE (acterhd edition)
(x) acterhd probably void own warranty, so have no much chances to happy life; also probably corrupted stock firmware, and await replacement
/!\ Do it on own risk!
/!\ After unlock bootloader may disappear most apps.
/!\ If you stucked on "Unlocked and not trusted" and cannot go to bootloader, try uncharge battery to low as minimum, system will forcely shut down.
Unlock bootloader loader getting code (http://emui.huawei.com/en/plugin/hwdownload/download)
You can load modded SuperSU (https://forum.xda-developers.com/p8...-to-root-huawei-p8-lite-2017-android-t3582179 or https://www.androidfilehost.com/?fid=673368273298935423)
Some files also included
Gapps here not included (You may get http://opengapps.org/)
1. Enable USB debugging and type `adb reboot bootloader` i.e. boot to bootloader if possible
2. Unlock bootloader by `fastboot oem unlock #CODE#` (you can use side buttons), after this action will auto reboot with "Factory reset", which you can disappear most apps
3. Load most compatible recovery (https://forum.xda-developers.com/p8...on/recovery-twrp-huawei-p8-lite-2017-t3591762)
4. Flash recovery `fastboot flash recovery twrp-3.1.0-2-v2-prague.img`
5. Reboot to recovery mode
6. Install SuperSU for EMUI5.0 by flashed TWRP
7. Reboot device
8. Also you can `fastboot oem relock #CODE#`, but be accure with this moment
Can someone confirm this works? I'd like to root my PRA-LX1
Pozla said:
Can someone confirm this works? I'd like to root my PRA-LX1
Click to expand...
Click to collapse
@Rommco05 can you confirm?!
Twrp
When I flash twrp in cmd. It shows a failed message partition length error. What will I do now I'm totally screwed up.. I tryed most of the rooting apks; but it doesn't root my honour 8 lite. Pls help me to install custom twrp recovery
We cant unlock the bootloaders anymore right?
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Billchen0014 said:
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Click to expand...
Click to collapse
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
012345678 said:
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
Click to expand...
Click to collapse
the bootloader is locked, or so says the fastboot screen along with FRP which is why i cannot unlock the bootloader to install TWRP...
Need Warning
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
wingkou said:
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
Click to expand...
Click to collapse
That makes three of us. I ended up with the same problem after getting to step E in the rebranding. I'm no stuck not being able to unlock my bootloader as it says Phone locked in green and FRP lock in green. OEM unlocking option is greyed out in developer options
before i found a solution i hardbricked my mate 9, but it works for soft bricked mate 9 too https://forum.xda-developers.com/mate-9/help/solution-19-00-fix-hardbricked-huawei-t3750315 i was in the same situation, thats how i fixed it, just follow steps from how to use the DC-phoenix tool with Factory Firmware file, update.app and hw.app
Now I'm in the same situation
After rebranding my Honor View 10 BKL AL20 to BKL L04, it can't boot into system and frp locked oem locked. Erecovery says getting package info failed.
Hi, so yeah i completely messed up my device lol. First i unlock my bootloader with the code from Huawei website, then i unlock the bootloader, rooted, etc. After that i use srktool to debrand my device while running emui 5.0.1, then the device restarted and erecovery prompted that my data partition was damaged. So i format it through the erecovery and then the erecovery searching for the firmware and didnt find one. Then i go into fastboot and the device was PHONE Locked and FRP Lock! i tried to unlock the bootloader again using my key and it failed. Can anyone here help me? thanks
(Sorry for my bad english)
Nvm, fixed. Thanks anyway
Hi.
First: Sorry My bad English.
So. The base is: FRD-L09C432 officially upgraded to Oreo. Data partition encrypted, bootloader and FRP unlocked status, TWRP installed and my phone rooted with Magisk. After some read in this and other forums I edited the phone fstab files, to delete data encryption. After edit this files I do a "Format Data" in TWRP. After that the FRP status changed from "Unlocked" to "Locked", and in Settings the "OEM Unlock" disabled and grayed. Bootloader status stay in unlocked. So this is the current state. The Recovery not changeable from TWRP to stock, because FRP-Lock status.
So, My questions is: How do I unlock FRP? If I rollback to Nougat, the FRP is unlock or not, or what? How do I rollback with TWRP? HurUpdater? What can I do, because if I rollback and FRP stay locked, I won't flash back the TWRP. And if this occur, I can't root my phone, and have other problems.
Ideas?
Did you try to unlock bootloader via fastboot?
cococchio said:
Did you try to unlock bootloader via fastboot?
Click to expand...
Click to collapse
bootloader already unlocked. I won't try to relock, because 1 months ago I relocked, and my phone is bricked. Won't boot to system, and just DC-Unlocker helps to bring back my phone to life.
Good to know. I am also bricked but I was able to unlock bootloader via fastboot. I only have access to error mode.
flash via download mode and wifi
Hi
I got an Huawei p20 not rooted not unlocked no oem unlock option checked, nothing
stock phone
Phone is stuck on bootloop, I can only acces to fastboot when connected to computer, can't access recovery nothing
What can I do to get the phone working again ?
Huawei HiSuite (official) can't restore system (the software support only like 10 device, what a joke)
Pls help