So, Phonearena has a few articles on how you can get wireless charging on the S4 now, but they involve a third-party wireless receiver (read: back cover) that looks like it adds a considerable amount of thickness to the phone -- far too much to fit into a case not designed for it. The receiver also won't be shipping for another 3-4 weeks. They've also released a charging pad (which doubles as a dock), but it looks goofy and just uses the Qi standard anyway, so there are plenty of options out there for that portion of the charging.
My question is: Are there other available receivers that actually work? eBay (and the like) displays a list of Galaxy S4 receivers (basically a little flat mat that sits on top of the battery and connects to the Qi hubs inside the back cover), but I'm extremely iffy on ordering any electronics from China unless they're proven...and all of the receivers listed are from mainland China. Has anyone given one of them a shot? And if so, are there any that work efficiently and don't cause problems?
I know, for the future, that Samsung has said they will have a wireless hub (mat) and receiver out sometime soon...but they said the same thing about the Galaxy S3, and it was never released. I trust the word of Samsung about as much as I trust the word of the IRS right now.
Anyone with experiences??
I feel the same way about china electronics, but I do have a Metrans brand one on the way I'm thinking sometime this week, I also go in on the indiegogo Monsterwatts receiver which probably wont show up till June.
so far all the info that I've read up in these forums about the receivers is that with just the Receiver the NFC does not work after installation, one guy used a note 2 NFC antenna to get it working. This sounds like too much fumbling to me and I prefer a sounder solution.
the official receiver covers are starting to show up in both white and black colors (black just recently) they cost 50 bucks and as you mentioned add considerable thickness. the cost doesn't bother me as much as the added thickness, which is what's holding me back from buying it.
The route I'm going to take for the time being is to try the receivers, if it works and does not add any bulge to the rear of the phone while disabling NFC, I could live with that.
maybe if they come out with a decent case for the official receiver cover I might get it.
I don't really use NFC anyway (who does), so that's an acceptable option for me. I have two people at work that I actually *would* use NFC stuff with, and we can just send files to each other without it anyway. Since Verizon has been so gracious as to make sure none of the devices on its network (outside of Nexus devices) can use Google Wallet, I really have no other reason to use NFC.
http://forum.xda-developers.com/showthread.php?t=2296301
Need to read thru his post. Yes, while the receiver is from china, the NFC is functional.
I ordered one from the UK and got it shipped to the US. Am I worried its from china? Not really its 20-30 bucks. It would be the last time I lose that amount.
I will agree that eBay has a lot of knock offs but its the chance you take.
I would like to see a Samsung product out as well, but this will have to do until they put something out.
The main reason Im trying it is because Im tired of looking for a desktop charger that I can use the S4 with while its in a case.
Good luck to ya!
that dude's thread confuses me, he shows some youtube video about a Sview case and how it doesn't close flush with the receiver and says you need to press it hard be careful not to crack your screen... after that he lost me.
I just want a thin receiver that I can slip in the rear without the bulge and closing issues, even if NFC is a NO-GO that's fine with me haha.
I purchased this http://www.ebay.com/itm/121111622748?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
The item does work fine, does NFC work I don't know as I never use it but I will try and find out in the near future.
Item was received quickly and "worked" out of the box but the phone would slide off of the touchstone fairly quick, I had modded multiple phones to work with touchstones including my galaxy nexus so I gad these laying around http://www.kjmagnetics.com/proddetail.asp?prod=D401-N52&cat=168
some N52 magnets, and after checking polarities and moving everything around it now works great and holds the phone very securely.
Charge rate looks to be about 800mA peaking at 615mA incoming charge while the phone is on, Average draw while off the charger is about 200mA with same apps running so about 800mA I do not know what it should be giving out but this is more than enough to charge.
Thought people would like to hear about this and am willing to help if necessary.
nice but I am already invested in QI charging pads.
I think that's the trend anyway, I'm surprised there are still an ample supply of touchstone chargers and palm pre back plates still in the market.
galaxy808 said:
nice but I am already invested in QI charging pads.
I think that's the trend anyway, I'm surprised there are still an ample supply of touchstone chargers and palm pre back plates still in the market.
Click to expand...
Click to collapse
They are being supplied by third parties lately. I try and get the originals only though..
I also had a Qi Nexus 4 but I missed the magnetic pull of the pre I had and the galaxy nexus I modded so I did this.
And I can get a proclip for my car and these make amazing car chargers, which is the main reason I purchased the touchstone version.
SoM3_Idi0t said:
http://forum.xda-developers.com/showthread.php?t=2296301
Click to expand...
Click to collapse
That link + this link
http://forum.xda-developers.com/showthread.php?t=2256339
= no need to create a new thread asking the same question!
KryptosXLayer2 said:
That link + this link
http://forum.xda-developers.com/showthread.php?t=2256339
= no need to create a new thread asking the same question!
Click to expand...
Click to collapse
I wouldn't have created a thread if either of those had helped :good:
The first thread is fairly useful...but is very hard to understand. Also, that solution is pretty much only available overseas for some time. My thread is about using this functionality in North America...which is a totally different story. It's possible to order his solution, but it would cost in the neighborhood of like $75 for the receiver alone...much more than any other available solution.
This thread about looking at options and figuring out what they are.
hotleadsingerguy said:
I wouldn't have created a thread if either of those had helped :good:
The first thread is fairly useful...but is very hard to understand. Also, that solution is pretty much only available overseas for some time. My thread is about using this functionality in North America...which is a totally different story. It's possible to order his solution, but it would cost in the neighborhood of like $75 for the receiver alone...much more than any other available solution.
This thread about looking at options and figuring out what they are.
Click to expand...
Click to collapse
I got the cheapest possible solution I could find on eBay and/or other Chinese sites like AliExpress.
The charger, including a 5V 1.5A wall charger cost me just under $30 ad I got the the Qi receiver for $23. Both prices including S&H from China. It took less than two weeks before I received those items. The reason why I choose this solution was because I wanted to keep the S4 as slim as possible, and also be able to use the flip cover. To get it cheap is also a bonus.
The charge rate is at 640ma, and the bulge the Qi receiver is making is not visible. I removed the thin plastic film from the backside of the receiver and shaved off as much plastic from the inside of the plastic cover as I dared. There was a small visible bulge before those small modification. After the modification one can still "sense" the Qi receiver, but it is not visible or make the phone wobbly when lying on its back.
The only downside beside the rather low charging rate from this kit is the poor quality of the wall charger. It gets very hot and the solution should have been replaced with a micro USB port on the charging pad to make it more versatile when it comes to replacing wall chargers. The pad is also made too glossy and has an annoying sound when the charging initiate and a continuos overly bright status light. I removed the internal speaker and also dimmed the light with some standard paper. The kit can be modified with other housing solutions, and I was thinking of maybe install it inside a small paper-book or something that is a more "standard" item on a nightstand I will just have to check how hot the charging plate and/or the S4 gets before I try out any mods like that.
My recommendation is; Get an iQ charging receiver on eBay. The one I got is OK, but I might have chosen the oddly shaped Qi receiver after the reviews I have read. There is also rumours about a v2 of this slimmest receiver available. Probably wise to sit on the fence a bit longer. I would also advise to stay clear of those cheapest T-100 kind of charging pads that you can find everywhere for $25-$40. I would rather get the Nokia DT-910 or the genuine Samsung charging pad (are there two different kinds of those; one with a micro USB input and another with a standard charging plug?) In Norway both those chargers costs around 40-45 British pounds
Here is a few pics of my kit:
The other threads do not claim that they are UK/EU based.
Lots of usefull information in both. Bubbles post was to verify that the NFC works with the receiver he got.
You should probably do some research on your own.
and BTW, the cost to have just the reciever is £16.99. which is 25$ US.
http://lmgtfy.com/?q=£16.99+to+US+Dollar
Your post is a dupe. Sorry. It just is.
Looking for a replacement for the OEM charger. I looked on amazon but the reviews are mixed...some say its a knockoff that ruins the phone while others say its genuine and works 100%....can anyone back up this?
Pivo187 said:
Looking for a replacement for the OEM charger. I looked on amazon but the reviews are mixed...some say its a knockoff that ruins the phone while others say its genuine and works 100%....can anyone back up this?
Click to expand...
Click to collapse
Any microUSB charger should be good. I use charger from my HP touchpad.
Read this if you want to know why
http://www.righto.com/2012/10/a-dozen-usb-chargers-in-lab-apple-is.html
I had the same problem before and went for one off the amazon market place from a seller Crazy Bee. Sorry i cant post links as I'm not at 10 posts yet but it is a genuine charger if that helps.
Well I want one just like the original with 3.0 USB and fast charge. The amazon reviews seem to say they are original while others say they are not...So wondering if anyone got one that is just like original?
This is the one i ordered and believe to be genuine from the quality, one thing i don't understand is i couldn't find a charger exactly the same as my original with the usb outlet coming from the bottom of the charger. It seems samsung make several "travel chargers" which all have the usb coming from the top or side:
http://www.amazon.co.uk/gp/product/B00K8ADDIS?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Hi guys.
I got a Nexus 5 a few months back and used it with my friends prototype of a wireless charging holster first of it's kind he's been working on personally for over a year. Just wanted to help him out and spread the word a bit. Here's the kickstarter link:
https://www.kickstarter.com/projects/1108765845/fusion-one-wearable-wireless-charging-on-the-go
The device is a holster with a 6000 mAh powerbank at $49, wireless charging + USB output 2 phones may be charging at once.
If this is not allowed then please remove I'm not sure if it is or not but wanted to help.
SunSDK said:
Hi guys.
I got a Nexus 5 a few months back and used it with my friends prototype of a wireless charging holster first of it's kind he's been working on personally for over a year. Just wanted to help him out and spread the word a bit. Here's the kickstarter link:
https://www.kickstarter.com/projects/1108765845/fusion-one-wearable-wireless-charging-on-the-go
The device is a holster with a 6000 mAh powerbank at $49, wireless charging + USB output 2 phones may be charging at once.
If this is not allowed then please remove I'm not sure if it is or not but wanted to help.
Click to expand...
Click to collapse
Can't find more of an explanation. Is this charging done wirelessly or is there a port inside the pouch that must be inserted in the phone. If there is a connector one has to be aware of the orientation of their phone when sliding it into the pouch. Its a useful idea. Would recommend a professionally shot video to better market the idea. Would've opted in if it were smaller.
Looks cool.
Hey all,
Starting a new thread on this, since the other one is several months old.
Does anyone know of where the S5 Wireless cover can be found where it isn't over priced (i.e. $100)? I'm looking to get the feature, as my charge port is acting funny w/ a lose connection to charging cables.
If not the OEM Samsung version, does anyone know of a decent After Market version that still keeps the waterproof capability. I've seen one on Amazon that doesn't have the waterproof gasket, but no luck anywhere else.
TIA.
FlynHokie said:
Hey all,
Starting a new thread on this, since the other one is several months old.
Does anyone know of where the S5 Wireless cover can be found where it isn't over priced (i.e. $100)? I'm looking to get the feature, as my charge port is acting funny w/ a lose connection to charging cables.
If not the OEM Samsung version, does anyone know of a decent After Market version that still keeps the waterproof capability. I've seen one on Amazon that doesn't have the waterproof gasket, but no luck anywhere else.
TIA.
Click to expand...
Click to collapse
How about:
http://www.newegg.com/Product/Product.aspx?Item=9SIA7142E95226
And, by the way, the S5 is NOT waterproof, it is water resistant, big difference...
I don't think that one is for the S5. The contacts for the battery don't match the battery pattern. Thanks for looking though.
Understood not waterproof. Just a lack of brain power to write resistant last night..
ME TOO!!!
I've been searching myself for years now, can't figure out why the hell they still cost so much, I'm still not sure I wanna pay $30 + shipping for one directly from Samsung/usa (but they aren't cheaper anywhere else!)
But anyhow... I haven't tried this myself but you could have a look getting at a Qi standard wireless receiver. I don't go on Amazon much, but there's a lot of them on Ebay.
Installed the following last week on my S5, couldn't be happier.
BestFire® Ultra-thin QI Wireless Charging Charger Receiver For Samsung (S5)
https://www.amazon.com/gp/product/B00JQ7UCJW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
* NOTE... Images aren't for the S5. Unit shipped actually has 3 contact pins, which we need.
Fits well and seals with stock battery door. Slight center bump, but hardly noticeable especially with a protective case on. Using mine with a Samsung wireless charger.
S5
How is the performance of the wireless charging battery cover? Did it work?
Can anyone recommend a good car charger for the V30? Thanks!
Any one that is quick charge 3.0. I recommend Anker.
I'm curious to know if there are any American or Japanese made chargers. I see plenty of reviews of various brands but nobody actually cracking these things open evaluate the quality of the components inside.
I've been using a Belkin car charger I picked up last year for my V20. It has a hard wired lead for the USB-C and an extra USB port if you want to plug in another device.
nx_2000 said:
I'm curious to know if there are any American or Japanese made chargers. I see plenty of reviews of various brands but nobody actually cracking these things open evaluate the quality of the components inside.
Click to expand...
Click to collapse
Last year we had Benson. His charts are still around the internet somewhere. Not sure if he's still testing cords and chargers or if he's given up at this point.
byproxy said:
Can anyone recommend a good car charger for the V30? Thanks!
Click to expand...
Click to collapse
https://www.amazon.com/gp/aw/d/B01I0RQY3Q/
I have one of these. I bought one for my girlfriend, as well.