Database Info

[Q] Note pro 12.2 screen flickers

I bought a refurbished note pro from amazon about a week ago. The screen flickers randomly for about 3 seconds onoffonoff. No real harm to anything but I would like it fixed and don't want to ship it out and wait for a new one. Any suggestions would be great thanks in advance.

Force GPU Render and Turn off Hardware overlays
Enable Developer Mode (Google it)
In Developer Options
Force GPU Rendering : Enable (Check)
Turn off Hardware overlays : Enable (Check)
Try it, it has worked for some folks.

What is the reason of screen flickering?
I have exactly the same problem. But can someone please explain the reason of this?
Is it hardware related or is it just a firmware bug that can be permanently fixed?
In my case, this problem disappears after restart and then I can have 10-24 hours of normal operation before this problem comes back again. I personally find this very strange...

Flickering also
Mine also is flickering. This happens in highend games and when the battery is lower dan 51 % and the screen brightness is full. When I adjust screen brightness to 50 % or less the flickering stops. I guess it is a battery problem combined with software problem.
I already did fresh install and changed setting in developer setting.
Does someone has an solution?

I have the same issue that happens with the battery lower than 45%....... I hope someone can solve this .....
---------- Post added at 01:17 PM ---------- Previous post was at 01:12 PM ----------
theliner said:
Enable Developer Mode (Google it)
In Developer Options
Force GPU Rendering : Enable (Check)
Turn off Hardware overlays : Enable (Check)
Try it, it has worked for some folks.
Click to expand...
Click to collapse
I will try and I'll let you know. :fingers-crossed:
---------- Post added at 01:35 PM ---------- Previous post was at 01:17 PM ----------
theliner said:
Enable Developer Mode (Google it)
In Developer Options
Force GPU Rendering : Enable (Check)
Turn off Hardware overlays : Enable (Check)
Try it, it has worked for some folks.
Click to expand...
Click to collapse
No changes for me.....:crying:

marko68 said:
I have the same issue that happens with the battery lower than 45%....... I hope someone can solve this .....
---------- Post added at 01:17 PM ---------- Previous post was at 01:12 PM ----------
I will try and I'll let you know. :fingers-crossed:
---------- Post added at 01:35 PM ---------- Previous post was at 01:17 PM ----------
No changes for me.....:crying:
Click to expand...
Click to collapse
Tomorrow mine will go back to Samsung Supplier. Case Magnet also does not work.

I thought I was the only one with this issue. Glad to see its not just me. I am also experiencing heavy flickering on this device. I'm thinking maybe I should flash a firmware upgrade??? I am already at NC5, but isnt there a newer one available - ND* , NE*, NF* ??? Its really starting to bother me.

baddison said:
I thought I was the only one with this issue. Glad to see its not just me. I am also experiencing heavy flickering on this device. I'm thinking maybe I should flash a firmware upgrade??? I am already at NC5, but isnt there a newer one available - ND* , NE*, NF* ??? Its really starting to bother me.
Click to expand...
Click to collapse
Updating did not help for me, also tried other original firmwares. I only experienced flickering under 50% battery and full resolution till 70% resolution. Also flipcovermagnet did not work. Today I returned mine for repair. I triggered Knox 1 time, Samsung will only repair the tablet one time for that.

It is firmware related. It is fixed in NG2 firmware, which is released for Netherlands and Poland so far. On all older firmwares, enabling "disable hardware overlays" in developer options fixes this. But this option needs to be enabled on every reboot, as it doesn't stick.

omeryounos said:
It is firmware related. It is fixed in NG2 firmware, which is released for Netherlands and Poland so far. On all older firmwares, enabling "disable hardware overlays" in developer options fixes this. But this option needs to be enabled on every reboot, as it doesn't stick.
Click to expand...
Click to collapse
Possibly also hardware related, as my NC3/NA7/NC3 DBT p905 LTE does not suffer from this.

ShadowLea said:
Possibly also hardware related, as my NC3/NA7/NC3 DBT p905 LTE does not suffer from this.
Click to expand...
Click to collapse
Also installed NG2, it wasn't Dutch by the way. It also did not solved the problem.
When my tablet is coming back I will let you know what Samsung had to say.

This problem is so stange. After restart I can have a few days without any problem at all. I can play games, I watch videos, I try to provoke the flickering by opening different programs that use hardware overlay feature but everything works perfectly... The problem comes back suddenly, the device at that time can be hot or cold, it can be just turned on from sleep mode or be used for many hours prior the moment the problem appears again. I really cannot identify the pattern and determine what can trigger this flickering. It is so annoying.

ehoton said:
This problem is so stange. After restart I can have a few days without any problem at all. I can play games, I watch videos, I try to provoke the flickering by opening different programs that use hardware overlay feature but everything works perfectly... The problem comes back suddenly, the device at that time can be hot or cold, it can be just turned on from sleep mode or be used for many hours prior the moment the problem appears again. I really cannot identify the pattern and determine what can trigger this flickering. It is so annoying.
Click to expand...
Click to collapse
Hm, did you check the RAM usage when it happens? Every device starts having issues when there are too many apps in the cache and the RAM is too full (from freezes to lag to reboots), and since you mention it can take days after a reboot, it might be RAM related. Did you try clearing that when it happens?

ShadowLea said:
Hm, did you check the RAM usage when it happens? Every device starts having issues when there are too many apps in the cache and the RAM is too full (from freezes to lag to reboots), and since you mention it can take days after a reboot, it might be RAM related. Did you try clearing that when it happens?
Click to expand...
Click to collapse
Today I ran different stress test apps and one app that fills RAM up to the limit when all background programs are gets killed by the internal Android "safety" feature and I did not get any flickering! But I am almost 100% confident that it will appear again in a few days. I also tried to carefully twist and bend the tablet thinking that the problem might be related to loose cable connection but still nothing.

Registered to say that I've had the same screen flickering problem with my Galaxy Tab Pro 12.2 wi-fi tablet. I have actually returned two and am hoping for better luck with the third. I've bought all three from Costco in Phoenix, Arizona. With the first, I used the tablet for almost two months before the screen started flickering and I got random shutoffs/reboots. With the second, I got these same symptoms within two days. The flickering continued after a system restore, so I don't think it's a software problem.
Elsewhere on the internet, people have reported flickering while watching video and fixed it by turning off software rendering in developer options. That, however, seems to be a separate problem. I experienced the flickering during all activities, and changing the rendering setting didn't fix it. Nor did turning off auto-brightness.
The flickering seemed to show up most often when the battery was low, making me wonder if it was a power problem. I've also noticed, though, that the tablet seems to get really hot around the top center, where the camera lens is, especially on the backside. This makes me wonder if the tablet is burning itself out, or if using a case might hasten the problem by holding in heat.
Bought this third tablet from a different location, thinking maybe there was a bad run or something. If anyone figures out the issue or gets any kind of useful response from Samsung, please post.

This makes me wonder... Are you all using the WiFi edition of the tablet? Anyone with the LTE P905 having the problem?

ShadowLea said:
This makes me wonder... Are you all using the WiFi edition of the tablet? Anyone with the LTE P905 having the problem?
Click to expand...
Click to collapse
No screen flicker and I'm using an AT&T p907a.

I use P900, wi-fi only.

Does anyone have the issue when it is plugged in?

omeryounos said:
It is firmware related. It is fixed in NG2 firmware, which is released for Netherlands and Poland so far. On all older firmwares, enabling "disable hardware overlays" in developer options fixes this. But this option needs to be enabled on every reboot, as it doesn't stick.
Click to expand...
Click to collapse
Looking at sammobile Poland and Netherlands are on NF2. ........so where have you found this NG2?

Touchscreen issues are finally gone?

I blamed OnePlus for months for not doing anything for the annoying problem related to the touchscreen panel in a lot of models of the OPO. I was sure it was an hardware problem and only a RMA could have done something for me. I couldn't return my phone cause i always need it and i didn't have alternative phones to use. So i just gave up, living with some not-extremely-frustrating-unresponsiveness during fast typing.
But...
After installing the last official CM11S update (the 05Q one), i noticed some strange responsiveness during a chat with a friend. I was curious, so i reinstalled YAMTT for some test. I couldn't believe that all my inputs were perfect even at fast speed. I still don't know if it was a software or hardware issue, but OnePlus seems to have finally fixed my situation.
Looking for your experience after the update.

Elvecio said:
I blamed OnePlus for months for not doing anything for the annoying problem related to the touchscreen panel in a lot of models of the OPO. I was sure it was an hardware problem and only a RMA could have done something for me. I couldn't return my phone cause i always need it and i didn't have alternative phones to use. So i just gave up, living with some not-extremely-frustrating-unresponsiveness during fast typing.
But...
After installing the last official CM11S update (the 05Q one), i noticed some strange responsiveness during a chat with a friend. I was curious, so i reinstalled YAMTT for some test. I couldn't believe that all my inputs were perfect even at fast speed. I still don't know if it was a software or hardware issue, but OnePlus seems to have finally fixed my situation.
Looking for your experience after the update.
Click to expand...
Click to collapse
Not yet they aren't. It appears to have affected the functionality of double tap to wake for some people.
Doesn't seem like they're updating us on the investigation either. If they've fixed it using software, at the very least they should tell affected users why all the previous updates didn't work for them.

I've been on the nightly road since mid August, in my experience touch issue improved a lot after the touch firmware update in October, however there are still very rare cases where finicky / unresponsive touch happens, you don't want that when you ask someone for her contact in a bar on Halloween and she can't input the letter 'n'.
After that I think I experienced touch issue twice, I foolishly thought this was fixed sometime ago, however it came back big time the day before yesterday, and I was on the latest nightly... So in short, touch issue is not gone

touch issue
even im having touch issues with double tap and typing.

Touch screen seems less responsive since this update
Sent from my A0001 using XDA Free mobile app

anuradha1208 said:
even im having touch issues with double tap and typing.
Click to expand...
Click to collapse
William Haven said:
Touch screen seems less responsive since this update
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Do you guys have any problems with vertical scrolling (i.e. in lists, webpages etc.)?

I'm thinking about downgrading... I'm currently running CM12 nightlies and the touchscreen is annoying me

vantt1 said:
Do you guys have any problems with vertical scrolling (i.e. in lists, webpages etc.)?
Click to expand...
Click to collapse
Everywhere

this is hopeless, I just went and looked at touch firmware updates, last ones are 1221 at the end of october and 1222 around new years, I remember it working ok during that time, and some time after that, how come I am experience severe touch issue these couple days, touch turned into swipes, swipes registered as touches, unresponsible parts on the screen. I am almost beginning to think it's about the weather/temperature, problems are more frequent when I am out hiking for a long time.
although somebody mentioned that last change was having problems days after http://review.cyanogenmod.org/#/c/83558/

st11 said:
this is hopeless, I just went and looked at touch firmware updates, last ones are 1221 at the end of october and 1222 around new years, I remember it working ok during that time, and some time after that, how come I am experience severe touch issue these couple days, touch turned into swipes, swipes registered as touches, unresponsible parts on the screen. I am almost beginning to think it's about the weather/temperature, problems are more frequent when I am out hiking for a long time.
although somebody mentioned that last change was having problems days after http://review.cyanogenmod.org/#/c/83558/
Click to expand...
Click to collapse
There are at least two different touchscreen issues as far as we know:
One is where the touchscreen is semi-terrible all the time regardless of temperature
The other is where the touchscreen becomes unresponsive with the increase in temperature, and subsides if the phone is restarted or cools down

Is there a way of finding out which firmware is being used for colorOS?
I can't take this anymore, I am considering flashing either 44s or color OS

Screen Flickering

Whenever I decrease my phone's brightness to the lowest, i can see some flickering below my phone's display. Does anyone here experience the same issue/ have a fix for this?

j7 flicker at low brightness
Whenever i face low the brightness of my j7 below 15% it started to flicker...
Please help and tell is it problem with the software or hardware.
I tried safemood but it still flicker
I also tried factory reset but still flicker
What should i do now?

I am having flickering problem in my j7,
When i am doing completely brightness low then it starting flickering... I have done data reset.. Wipe data reset but it's not work.. Please help me...
My Gmail is.... [email protected]

Its happend because of you pluggrd your phone with other chargers (volatage variation), once its happen can't do anything have to change full display. if your phone under warranty then goto near samsung care
Warranty is over and still you dont want to change display ?? Then slightly increase the brightness till the flickering is over and use bluelight filter app.

My j7 have problem.Is there a solution to this problem.

Oğuzhan1907 said:
My j7 have problem.Is there a solution to this problem.
Click to expand...
Click to collapse
No , you will need to replace your screen to fix this problem

messi2050 said:
No , you will need to replace your screen to fix this problem
Click to expand...
Click to collapse
Thanks

I also have this issue on my j7... sometimes. It doesn't seem to be a constant issue for me, just occasionally. I currently have it at the lowest brightness with no problem. Another symptom of this bug is a flash of pink when I lock the device.

I was also facing the similar issue and my phone is under warranty. I went to Service Center and told them that the issue keeps happening after New version update. They said it's a defect in my display in Samsung J7 and they agreed that they will replace display with free of cost since my phone is under warranty. Thanks to Samsung.

I am also having the same issue in my Samsung j7 phone.i am using ooriginal samsung charger.then how do I get this problem .plz help regarding this issue. I bought this 8months back only. Can I go Samsung care

Kwa nn mwanga wa cm yangu samsung j7 unacheza cheza chini ya kioo

uow
yes dude

My one is also. I updated to Android 6(Officially ask) Then After 2 weeks Its came to picture. I feel its come with update otherwise no volatage damaged. Why because I used original one only. And use with very carefully.

I have also same problem please tell me some solution for it

I have also this problem. how to fix it guys?

Try downgrading to lolipop
Ps:Not tested by me just heard this

Yes me 2

Same problem!!!!Please someone help

Whenever I decrease my phone's brightness to the lowest, i can see some flickering below my phone's display. Does anyone here experience the same issue/ have a fix for this?

Go to customer care
There is no way you could fix this.. It is a hardware problem. They dont check if you tripped knox or something, at least in my case they didn't. Because it is a hardware problem.
---------- Post added at 04:28 PM ---------- Previous post was at 04:23 PM ----------
And also who thinks it is their fault, it's not. It is samsung's fault. Whole j7 series has faulty display like note 7 battery.

Am i the only one who has display backlight flickering with my Zenfone 6?

Hi,
i got my Zenfone 6 today, and i really like it, but there is one thing that probably makes me return it...
The display is flickering when it‘s set to really low brightness, i think its the backlight.
I‘m not sure if it's broken or not. So, am i the only one with a flickering display?
Thank you

07713 said:
Hi,
i got my Zenfone 6 today, and i really like it, but there is one thing that probably makes me return it...
The display is flickering when it‘s set to really low brightness, i think its the backlight.
I‘m not sure if it's broken or not. So, am i the only one with a flickering display?
Thank you
Click to expand...
Click to collapse
I had the same situation yesterday, it was on low brightness too.
But only for a few seconds, for now, everything seems fine, even in low brightness.

With adaptive brightness set on or off?
Do you have the latest firmware version WW-16.1210.1904.133?

It doesn‘t matterif adaptive brightness is on or off, it does it as soon as the display lowers its brightness to the 1st 1/4 of the brightness bar...

Ok. Do you have the latest firmware version WW-16.1210.1904.133?

_jis_ said:
Ok. Do you have the latest firmware version WW-16.1210.1904.133?
Click to expand...
Click to collapse
Hi, i have the same problem. Received the phone a week ago and trying to find a solution. I am on the last firmware, tried the dev option about overlay, hard reset and still the same. Going to send it back to Asus for a refund...
I wonder if this is software or hardware related. As of now i can't use it at night with low brightness.

It will probably be a problem for a particular phone, I would recommend that you replace it with a new one.
https://swedroid.se/forum/threads/snabba-fragor-snabba-svar-zenfone-6.165775/page-38#post-2443073

Thanks for the feedback. Called Asus this morning to replace it hopefully.

My Zenfone 6 does the same. If I set the adaptive brightness on the low brightness flickering disappears. I think it's a software related problem because others Zenfone have the same behaviour.

Tried it. No matter the settings it flickers. I found a video that match the problem, weird no one noticed : youtu.be/DN1La8AbZsI
Check at 1.16 min, on the right side, it flickers like that, when the luminosity is low. This is what i see on my screen.

Same here. White backgrounds flicker when brightness set to low. Tried disabling HW overlay, but it didn't help. Phone on the latest firmware WW_16.1210.1904.133.

Anybody letting the techs at Asus know about these problems? I would like to hear about a fix before I buy anything.

I am in touch with Asus France, i have to send back the phone for an exchange as they told me it MAY be a hardware problem.
I linked the thread to them if it can help.

Every zenfone I have had (2 and 3) have had this issue.

Skhio said:
I am in touch with Asus France, i have to send back the phone for an exchange as they told me it MAY be a hardware problem.
I linked the thread to them if it can help.
Click to expand...
Click to collapse
I think it's a software issue...if you let the brightness working in auto mode the problem disappears.

It is set in auto mode on my device and still the same. With or without doesn't help sadly.

Hmmm is this international version? The U.S is coming next month. Hopefully this get fix before I'm buying it.
Sent from my SM-G970U1 using Tapatalk

Wulff73 said:
I think it's a software issue...if you let the brightness working in auto mode the problem disappears.
Click to expand...
Click to collapse
Mine is flickering when brightness is set to low (about 1/4-th of the brightness slider and down) no matter auto or no auto.

Funny how we here in the US complain that so many phones are released in the EU, or India, or China long before they ever appear here....but in reality it could be that we benefit from this practice so that some of these issues can be resolved by others before we have to deal with them.

jaseman said:
Funny how we here in the US complain that so many phones are released in the EU, or India, or China long before they ever appear here....but in reality it could be that we benefit from this practice so that some of these issues can be resolved by others before we have to deal with them.
Click to expand...
Click to collapse
I hope that when this phone is released in your country, this issue will be solved definitively via software update. The way I see it, this problem isn't a huge problem, fortunately. Actually the screen flickering occours only if the brightness is set to a very low level (e.g. <20%) but, with this setting, the backlight is too dim as well for use even in a dark room (obviously for my taste). Since I use adaptive brightness with default settings, the minimum value the screen brightness reaches is 34% so I never get the problem....

Question S22 Ultra bugs (mobile data/display/other)

Just got my phantom black, 12/256 exynos version delivered today, been using it since this morning and I noticed that on mobile data I have little to no connection even though the 5g icon is stable in the Taskbar, as soon as I connect to wifi everything runs normally. I also had the purple glitch when touching the fingerprint sensor but solved it by disabling the dinamic animated lock screen wallpaper and putting in a normal, static one.
Another issue is that the phone locks itself (goes to lock screen) while browsing the apps (just like double tapping on home screen) but not while using any app.
I hope this is just firmware issue since they are shipping all the phones with the same firmware region based but maybe they still need feedback from some carriers (hence the mobile data issue) and also the display glitches I believe are nothing that a firmware update wouldn't fix.
P. S. : in these first few hours I didn't get at 1 hz refresh rate

Masterkill88 said:
Just got my phantom black, 12/256 exynos version delivered today, been using it since this morning and I noticed that on mobile data I have little to no connection even though the 5g icon is stable in the Taskbar, as soon as I connect to wifi everything runs normally. I also had the purple glitch when touching the fingerprint sensor but solved it by disabling the dinamic animated lock screen wallpaper and putting in a normal, static one.
Another issue is that the phone locks itself (goes to lock screen) while browsing the apps (just like double tapping on home screen) but not while using any app.
I hope this is just firmware issue since they are shipping all the phones with the same firmware region based but maybe they still need feedback from some carriers (hence the mobile data issue) and also the display glitches I believe are nothing that a firmware update wouldn't fix.
P. S. : in these first few hours I didn't get at 1 hz refresh rate
Click to expand...
Click to collapse
With my xiaomi 12 pro if the screen brightness is dim it doesn't go to its lowest refresh rate. Increase the screen brightness and see if it goes to 1 hertz

I am having exactly all the same problems as OP with my 12/512 Exynos version. Now wondering if it is hardware or software issue with the screen glitching when using the fingerprint sensor. The glitch only occurs when using 3088x1440 wqhd+ resolution and dynamic animated lock screen. Position of the screen interference is always the same but can differ in size.

Masterkill88 said:
Just got my phantom black, 12/256 exynos version delivered today, been using it since this morning and I noticed that on mobile data I have little to no connection even though the 5g icon is stable in the Taskbar, as soon as I connect to wifi everything runs normally. I also had the purple glitch when touching the fingerprint sensor but solved it by disabling the dinamic animated lock screen wallpaper and putting in a normal, static one.
Another issue is that the phone locks itself (goes to lock screen) while browsing the apps (just like double tapping on home screen) but not while using any app.
I hope this is just firmware issue since they are shipping all the phones with the same firmware region based but maybe they still need feedback from some carriers (hence the mobile data issue) and also the display glitches I believe are nothing that a firmware update wouldn't fix.
P. S. : in these first few hours I didn't get at 1 hz refresh rate
Click to expand...
Click to collapse
I have the same issue with my S22 Ultra.
See my post : https://forum.xda-developers.com/t/first-impressions-24h.4403463/post-86438225

Same lags there. SM-S908B EUX

Exy always sucks. Why not get a snappy?

bs3pro said:
Exy always sucks. Why not get a snappy?
Click to expand...
Click to collapse
If only there we had a choice between exy and SD *sigh*

Some users have this very strange screen problem...

Some users have this strange screen problem .
Its random and it lasts for 1-2' sec
Anyone else?

I envy those who received their device already, over here they will be delivered next Friday so we have to wait a bit longer. However I don't envy the issues you guys are having, fingers crossed I don't have to return the device shortly after I get it in my hands.

anergos13 said:
Some users have this strange screen problem .
Its random and it lasts for 1-2' sec
Anyone else?
Click to expand...
Click to collapse
I've found a clip on YouTube with similar problem

xdocent said:
I've found a clip on YouTube with similar problem
Click to expand...
Click to collapse
That’s most definitely in need of a screen replacement. That’sa hardware failure. I would think one could get that fixed for free

freebee269 said:
That’s most definitely in need of a screen replacement. That’sa hardware failure. I would think one could get that fixed for free
Click to expand...
Click to collapse
What's interesting is that the guy reported the problem only when using WQHD+ on youtube. When used in say gallery the problem was not there.
I've found this guy's post with details on our national samsung group

xdocent said:
What's interesting is that the guy reported the problem only when using WQHD+ on youtube. When used in say gallery the problem was not there.
I've found this guy's post with details on our national samsung group
Click to expand...
Click to collapse
Could this also be a YouTube thing also? Like how Netflix has to certify certain devices in order to use HDR content. Maybe these new 2.0 panels need to have apps updated to work with them.

Masterkill88 said:
Just got my phantom black, 12/256 exynos version delivered today, been using it since this morning and I noticed that on mobile data I have little to no connection even though the 5g icon is stable in the Taskbar, as soon as I connect to wifi everything runs normally. I also had the purple glitch when touching the fingerprint sensor but solved it by disabling the dinamic animated lock screen wallpaper and putting in a normal, static one.
Another issue is that the phone locks itself (goes to lock screen) while browsing the apps (just like double tapping on home screen) but not while using any app.
I hope this is just firmware issue since they are shipping all the phones with the same firmware region based but maybe they still need feedback from some carriers (hence the mobile data issue) and also the display glitches I believe are nothing that a firmware update wouldn't fix.
P. S. : in these first few hours I didn't get at 1 hz refresh rate
Click to expand...
Click to collapse
About the refresh rate, did you see this article?
Samsung Galaxy S22+ and S22 Ultra refresh rate explained
There is a lot of confusion surrounding the Galaxy S22 series and the refresh rates of their displays. There is a lot of confusion surrounding the Galaxy...
www.gsmarena.com

BigDisplay said:
About the refresh rate, did you see this article?
Samsung Galaxy S22+ and S22 Ultra refresh rate explained
There is a lot of confusion surrounding the Galaxy S22 series and the refresh rates of their displays. There is a lot of confusion surrounding the Galaxy...
www.gsmarena.com
Click to expand...
Click to collapse
They forgot to mention one thing. The adaptive refresh rate only works, if your brightness is above 8% or ambient light sensor reads more than 40 lux.
So if you are some like me, with low brightness and low ambient light, get ready for your battery to dissappear as it will be stuck at 120Hz...

on some forums it is mentioned that on Vivis setting for display, the problem does not occur anymore; can you confirm?
anyway, the fact that these artefacts are not displayed when in FHD setting, shows that it is not a display problem, but a software or GPU

I've posted this in a separate thread. I don't think my issue is linked to the screen issues described here. I have a flashing green pixel. Seems like hardware. See the pics.

I have a mountain of problems too, with S22 Ultra black 12/256.
I've got:
Overheating and rebooting in my pocket when doing nothing
Random hanging whilst scrolling down a long list
Intermittent flashing green dots (I think four) across the screen
Horrendous battery life (had it for only 48 hours, but still)
S-Pen sometimes doesn't fire the Air Actions menu when removed (or basically just doesn't notice it's been removed?)
And not really a problem, but after 4 generations it still can't record HDR and 60 frames per second, when in 4k.
This is a huge disappointment, and the fastest tech return ever from me.

nathan.rich said:
I've posted this in a separate thread. I don't think my issue is linked to the screen issues described here. I have a flashing green pixel. Seems like hardware. See the pics.
View attachment 5542745 View attachment 5542747 View attachment 5542749
Click to expand...
Click to collapse
Mine gets delivered today. and if I have a green pixel like that on mine it is going back so fast.