i am using micromax a069
a week ago it started to restart on its own so i flashed stock rom using sp flash tool
then only boot image of micromax logo was showing up
then i again flashed the stock rom after formatting through sp flash tool
but now the black screen powers on untill i hold the power button
now i cannot even get to recovery
i pressed all the 3 buttons together then two options are available :recovery mode
factory mode
when i select any of them the phone again goes dead
plz help
Hi did you find a way to recover your device? I have the same problem with android head unit..
Related
hello friends,
i,m using Micromax canvas lite A92.........Today when phone suddenly goes rebooted n stuck on Canvas Logo.
what i done:
1) Remove the battery , put it again n restarted the phone...but phone stuck on Canvas Logo , white screen is flashed n then stuck on Canvas logo and same thing repeats.
2) Again remove the battery n put it back, Presss Power + Vol up + vol down to get into recovery mode, i got 2 options 1 one for recovery mode n 2 for factory mode....but when i selected any using vol up/down button, the phone again stuck at canvas logo n i cant enter into recovery mode.
my phone is not rooted too....n i ,m also unable to do factory reset as reocvery mode is not working for me..
Guys pls help.......what can i do now.........i need urgent help of yours..
thanx in advance...
just flash the stockrom
flash using sp tool
niftysid said:
hello friends,
i,m using Micromax canvas lite A92.........Today when phone suddenly goes rebooted n stuck on Canvas Logo.
what i done:
1) Remove the battery , put it again n restarted the phone...but phone stuck on Canvas Logo , white screen is flashed n then stuck on Canvas logo and same thing repeats.
2) Again remove the battery n put it back, Presss Power + Vol up + vol down to get into recovery mode, i got 2 options 1 one for recovery mode n 2 for factory mode....but when i selected any using vol up/down button, the phone again stuck at canvas logo n i cant enter into recovery mode.
my phone is not rooted too....n i ,m also unable to do factory reset as reocvery mode is not working for me..
Guys pls help.......what can i do now.........i need urgent help of yours..
thanx in advance...
Click to expand...
Click to collapse
Flash ur phone using sp flash tool. find stock rom on www[.]needrom[.]com
or find on xda for pre rooted rom.
this will definitely help u.
it means your phone is bricked and hang at bootloop so the soluton is
is to flash rom using sp flash tool
you need 2 software
1)sp flash tool
2)mtk drivers
if u want me to reply a full tutorial u can tell me coz i have no much time
or ucan watch turials in youtube
as searching"how to flash rom in micromax 98"
and i think that you have to tell me more about what happen that time or which software u were installing etc
feel free to reply me
niftysid said:
hello friends,
i,m using Micromax canvas lite A92.........Today when phone suddenly goes rebooted n stuck on Canvas Logo.
what i done:
1) Remove the battery , put it again n restarted the phone...but phone stuck on Canvas Logo , white screen is flashed n then stuck on Canvas logo and same thing repeats.
2) Again remove the battery n put it back, Presss Power + Vol up + vol down to get into recovery mode, i got 2 options 1 one for recovery mode n 2 for factory mode....but when i selected any using vol up/down button, the phone again stuck at canvas logo n i cant enter into recovery mode.
my phone is not rooted too....n i ,m also unable to do factory reset as reocvery mode is not working for me..
Guys pls help.......what can i do now.........i need urgent help of yours..
thanx in advance...
Click to expand...
Click to collapse
If you have any nandroid backup you can flash it or take it from anyone else. For this you would have to install Clackwork Mod Recovery.
You can also flash the stock rom using the SP Flash Tool.
My canvas lite A92 Bluetooth n wifi not working.... means not switching on
..
What can i do??
Sent from my Micromax A110 using XDA Premium 4 mobile app
Flash the stock rom by sp tool software...
Sent from my Micromax A92 using XDA Premium 4 mobile app
Stuck at logo
ganeshyemul said:
Flash ur phone using sp flash tool. find stock rom on www[.]needrom[.]com
or find on xda for pre rooted rom.
this will definitely help u.
Click to expand...
Click to collapse
You may also try some custom ROM. Good ones are available in XDA
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Nikola99603 said:
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Click to expand...
Click to collapse
1st .
if you have computer use sp tool flashing ....you can flash CWM via SPtool which requires computer .....i think this will going to reset your recovery mode ....then you can flash rom in your mobile ..
2nd .
you can directly flash rom via sptool . there are so many tutorials available regarding a110 device on xda . only choose your device you will get all available contents regarding your device ..
I
Nikola99603 said:
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Click to expand...
Click to collapse
Help me same issue facing tried to reflash cwmr by sp flash tools then also not able to access recovery installed ib phoneix v4 working very well but need to update one patch.
Sent from my A110 using XDA Free mobile app
unable to boot in recovery mode in micromax a110
kindly check thread
http://forum.xda-developers.com/showthread.php?t=2201689&page=2
Don't Worry if You Stuck On Boot Animation, Logo OR Facing Boot Loop
IF YOU HAVE BACKUP (Recovery) And Have Custom Recovery (CWM/TWRP)
Press Volume Up Key + Power Button (Till it Turns On)
Navigate to BackUp And Restore Then Select Restore And Select You Restore File.
IF You Not Have BackUp via CUSTOM RECOVERY
Use SPFLASH TOOL To Flash Stock ROM
HERE IS GUIDE: Guide BY SAM SOLOMON
Press THANKS If You Like My Work And Want Me To come With Things
If You Facing Any Problem You Can Ask I Will Definately try to help You
Sent from my Micromax A110 using Tapatalk
i have micromax a110 and tried to flash custom rom XR650 V14 and after rebooting it got stuck on the boot logo... luckily i had the bacup and restored it back.. is it means that i cant flash custom roms on my phone or there is another way.. kindly help me out
Hi,
I have flashed my Micromax A106 Unite 2 with custom recovery image using terminal emulator and later flashed the device using SP Flash Tool. Now I'am unable to hit the recovery mode, as when I try hitting recovery mode by pressing (Volup+Power button) at a time nor even turn on my phone normally(it doesn't come out of loop at all), which keeps on displaying the micromax and android screen and later keeps on rebooting (Boot loop). Can anyone pull me out of this problem?
Thanks,
pls help my lenovo s860 can't finish flash using sp flash tool
the reason my phone lenovo s860 got bricked is because I've installed too many xposed module, I rebooted it right after the installation and then it went boot loop
So I tried to format it using Recovery Rom but it went lag and it stuck there, so I pressed the volume up and down and the power button again to escape from lag but after the format The phone is stuck at the recovery mode even though I pressed reboot or power off.
Now I tried to Flash it using Sp flash tool (latest version) but I forgot to press the "format and download" instead I pressed the "download" right away with its stock Rom (also I forgot to press the checksum in the download options) and the installation continued but it did not went 100% but it is stucked at 25% or 24%
Now my phone just displays The lenovo logo with "Dl tool failed! " below
Pls help me (sa mga pro dyan)
I cant get it to fastboot
I've flashed custom recovery but it makes the screen all black when I turn it on
I also flashed it in sp flash tool the old version 3.13 something and still only 25%
PLS PLS PLS HELP ME
It's worth trying Lenovo's Smart Assistant. This is an official PC suite that looks like it can flash the latest stock rom onto your phone for you. You'll find it here: http://lenovomobilesupport.lenovo.com/gb/en/products/Phones/S-Series/S860-Smartphone/downloads/DS101291
I personally don't have a Lenovo phone but I've used Sony's PC software to fix similar problems to yours before now.
This will mean that your phone won't be rooted but at least it will work and you can then root it and reinstall what you need.
Let me know if this helps!