Don't Worry if You Stuck On Boot Animation, Logo OR Facing Boot Loop
IF YOU HAVE BACKUP (Recovery) And Have Custom Recovery (CWM/TWRP)
Press Volume Up Key + Power Button (Till it Turns On)
Navigate to BackUp And Restore Then Select Restore And Select You Restore File.
IF You Not Have BackUp via CUSTOM RECOVERY
Use SPFLASH TOOL To Flash Stock ROM
HERE IS GUIDE: Guide BY SAM SOLOMON
Press THANKS If You Like My Work And Want Me To come With Things
If You Facing Any Problem You Can Ask I Will Definately try to help You
Sent from my Micromax A110 using Tapatalk
i have micromax a110 and tried to flash custom rom XR650 V14 and after rebooting it got stuck on the boot logo... luckily i had the bacup and restored it back.. is it means that i cant flash custom roms on my phone or there is another way.. kindly help me out
Related
I'm using a lenovo s820, rooted, running stock rom and jb 4.2.1
I couldn't find any recovery like cwm or twrp for my phone and I ended up downloading a recovery that said it was a version of cwm for my phone from this app called mobileuncle mtk tools
The app flashed the recovery onto my phone and rebooted into recovery except that it didn't boot into recovery
Now it is stuck in a boot loop where it only shows the lenovo logo but does not boot
I've tried booting into recovery by holding "vol up+vol down+power" but it does the same thing
I tried booting into factory mode but it is in chinese and I cannot understand anything in it
I have a backup of my rom before flashing the recovery but it is stuck in the boot loop even after restoring the backup
I've also searched a lot and can't find a solution to my problem!
I've seen some solutions saying I should flash stock rom using flash tools but there's a big problem here. Flash Tools refuses to flash the stock rom onto my phone. I tried to do it while keeping the phone in meta mode but it wasn't happening.
I've attached the image of the factory mode menu
Please help asap! I can't use my phone at all and I'm panicking and I don't know what to do!!! :crying: :crying: :crying:
Update: I managed to restore clockworkmod recovery on my phone and I tried to restore the stock os from it but it says installation aborted and refuses to install the os :/
Look here:
http://forum.xda-developers.com/showthread.php?t=2576898
HI FRIEND AM AGAIN HERE WITH NEW UNBRICKING TUTORIAL FOR MICROMAX A35 AND OTHER Spreadtrum DEVICES
REQUIREMENTS :
1.cwm backup
2.cwm
3.boot.img
4.pc
5.mob which is stuck at boot logo and cant be flashed by research download or other tool
6.a rom {if backup doesnt work }
for those who are having stuck at boot logo problem ,
follow these steps
1.flash recovery to boot partiton
Code:
fastboot flash boot recovery.img
2.then press power key you ll boot in cwm
3.now wipe data and dalvik cache
4.place the backup in clockworkmod/backup/(your backup here)
5.now do restore backup .please do advance restore, restore system.img only
6.flash the boot.img to boot again
Code:
fastboot flash boot boot.img
link for backup
http://www.mediafire.com/download/86qssa1vs10doag/jelly+blend+cwm+backup+by+gopinaidu.zip
LINK FOR BOOT.IMG :
https://docs.google.com/file/d/0B8ks3Q1UXCFjZzJITS1MUHczM28/edit
credits
AKASH UJJAINKAR
PLEASE PRESS THANKS BUTTON
Not Working!
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
ijaz_shariff said:
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
Click to expand...
Click to collapse
many users tested it and it worked fine maybe u didnt follow correctly
Thanku so much its really works thnks man !!!
Problems in newly installed rom in micromax a35
I successfully flashed the stock rom in my bricked micromax a35 using the spreadtrum research download tool.
But there are a few problems I m getting. Please help.
1. Bluetooth is able to pair with other devices, but when I try to send or receive files using bluetooth, it doesn't accept.
2. IMEI number is changed for both sims. Will this create any problem?
3. When I try to call or somebody calls me, the dialer crashes and both sims shows no network.
4. Internet is not working.
Plz friends if there is any solution to this problem.
I had downloaded the stock rom files from xdadevelopers.
micromax a35 vibrate problem when switch on the phone
Hi,
My self pratik, i get some problem in my micromax a35.
that is when i try to switch it on it just continuously vibrates, no display on screen nothing just vibration
kindly provide me some solution
thanks
hey same problem here also pls reply any solution for this
mmx a35 stuck at logo
i was trying to install a custom rom but i cliked backup instead recovery it was taking much time so i removed battery now it is stuck at bolt logo . i have tried above method but when reboot again it stuck at bolt logo
Hey there,
I have a Micromax AQ4501, during flashing Custom ROM I think I made some mistake or selected improper ROM so my phone is not getting ON, it just shows the logo and that's it.
No recovery menu or any other option is available now, only fastboot mode is working...
Can u help me to solve this issue and recover my phone...?
Sent from my D2502 using XDA Free mobile app
mmx a35 stuck
While taking backup i removed the battery because it was taking time.....the sim cards were not detected,i thought factory reset would work but my phone is just vibrating again and again and not startingplease help me guys!!!
PRESENTING STOCK BOOT LOGO FOR MMX A110
SOMETIMES IT HAPPENS AFTER FLASHING SOME CUSTOM ROM IF U RESTORED BACK TO STOCK THE BOOT LOGO OF CUSTOM ROM REMAINS LOTS OF TRY CAN'T ABLE TO REMOVE IT THERE MAY BE CHANCES OF BRICK YOUR FON SO HERE IS THE SOLUTION FOR THAT JUST FLASH THIS FILE THROUGH CWM & U WILL GET BACK THE STOCK LOGO
This logo extract by me & converted to cwm flashable file
FLASHING PROCEDURE
WIPE CACHE/DALVIK
FIX PERMISSION
INSTALL ZIP FROM SD
DOWNLOAD LINK:- http://www.4shared.com/zip/WSPyNw7Hba/BootLogo.html
Hit thanx if u like it which will help me to post more things for u
I tried to install cmw recovery on Micromax a104 after installing I tried to boot into recovery mode but my phone doest boot into recovery mode either of cmw recovery or stock android recovery mode....it shows micromax logo and then star the phone ....I tried to press volume up + power button to boot into recovery mode I am not able to do so...plz help me how to revert back to stock android recivery mode ...
Download stock rom. Load scatter file in sptool. Uncheck all check boxes except recovery. Click on download. Flashing completes. Now you can enter into stock recovery
Sent from my Micromax A104 using XDA Premium 4 mobile app
[email protected] said:
I tried to install cmw recovery on Micromax a104 after installing I tried to boot into recovery mode but my phone doest boot into recovery mode either of cmw recovery or stock android recovery mode....it shows micromax logo and then star the phone ....I tried to press volume up + power button to boot into recovery mode I am not able to do so...plz help me how to revert back to stock android recivery mode ...
Click to expand...
Click to collapse
Looks like you lost your recovery so go download stock rom and drivers and as it by sptool.
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Okay so you are unable to boot your device in recovery mode. You can download stock recovery or any custom recovery for your device and then again flash it using flashify. Hope it will work. If its not working let me know by replying. :good:
Flashify is unable to flash stock n custom recovery in my mmx a106. I tried it but i got same issue as amlesh
Whats you need to do is to install sp flash tool on your pc and the stock rom for your mmx unite 2 lollipop .then install sp flash tool and and execute the program ...then there will be a command 'Scatter file' ....click on that and open that in fhe Firmware folder of your Stock Rom ....the connect ur device using usb cable and then click download in the sp flash tool......after completing that disconnect ur devices and reboot it....
Wrong Choice!
Flashify and Twrp are both bad for Unite 2!
You would have flashed the Philz Recovery with SP FLash tool and then flashed the TWRP recovery using it!
Now Still you can do the same
Just google philz recovery and you will get a detailed answer there!
If you like this hit THANKS
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Your phone appears to have gone into a bootloop.
Here is what you can do as you can't get into the system and reboot into recovery mode. Just confirm if you are doing it the correct way.
To enter Recovery mode - turn phone completely OFF.
Recovery = Vol Down + Power (hold both down for several seconds)
This button press procedure varies with each device/model of phone.
Click to expand...
Click to collapse
If the above steps failed, proceed down below.
Things you will need:
1) USB to PC connecting cable
2) A PC where you can download one of the tools to recover (MTKDroid/SpFlash along with the device specific Scatter file)
3) USB drivers installed on your PC to connect with your phone
4) Patience to read references and follow the steps to flash recovery using Tool
CAUTION: Do steps at your own risk. Do not hesitate to ask if not sure. Post restoring recovery successfully, if you plan to flash a Custom ROM, suggest taking a backup from device using TWRP OR atleast the NVRAM using MTKDroid Tool so that you do not run into issues resulting with SIM showing No Network/Service.
Click to expand...
Click to collapse
References: (Some of the community folks have done the hard work to publish these)
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
Installing custom recovery using SP Flash Tool(COMPLETE TUTORIAL)
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
https://forum.xda-developers.com/showthread.php?t=2730031
[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Ensure to have the latest versions of TWRP and the flash tools MTKDroid AND/OR SPFlash.
To let you know, I've used the recoveries viz. CTR, TWRP, CWM, Philz on MMX a106 and haven't experienced any issues at all. Neither have I had any issues with Flashify as reported by some. Anyways its a personal experience
NOTE: If the issue is already resolved by now, please help others know it with your fix.
Click to expand...
Click to collapse
Hope this helps, happy restoring
Finally, Thank if you feel helped.