Related
Hi everyone, my XT925 is stuck in fastboot, and whenerver I try to flash it everything just fails; RSD shows this when I try to flash:
Failed flashing process. 1/20 flash partition "partition signed" -> Phone returned FAIL
I tried to flash this stock rom: XT925_vffr-user 4.1.2 9.8.2Q-8-XT925_VQU-26 1359487946
I had already rooted the phone and unlocked the bootloader too, and when I did an OTA update all hell broke loose, the phone now goes directly to fastboot mode, and shows this:
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
It also says Phone is LOCKED, Status Code:0
I think this means that somehow the bootloader is locked but I have already unlocked it; I don't know what to do, please help
Some Help
Hi, the same thing happened to me when I tried a ROM from a VFR on my LATAM RAZR HD. The OTA messed everything up.
You can check how I solved it on the thread I created asking for help:
http://forum.xda-developers.com/showthread.php?t=2273574
Basically you need to treat your phone as LOCKED bootloader, meaning only flashing of a version that belongs to the region of your phone and newer or same version as the failed OTA will allow you to flash. Since this is the only way LOCKED bootloader phones will flash.
Rokwenelenya said:
Hi everyone, my XT925 is stuck in fastboot, and whenerver I try to flash it everything just fails; RSD shows this when I try to flash:
Failed flashing process. 1/20 flash partition "partition signed" -> Phone returned FAIL
I tried to flash this stock rom: XT925_vffr-user 4.1.2 9.8.2Q-8-XT925_VQU-26 1359487946
I had already rooted the phone and unlocked the bootloader too, and when I did an OTA update all hell broke loose, the phone now goes directly to fastboot mode, and shows this:
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
It also says Phone is LOCKED, Status Code:0
I think this means that somehow the bootloader is locked but I have already unlocked it; I don't know what to do, please help
Click to expand...
Click to collapse
still cannot flash
I tried to flash this firmware, it's the more recent from telcel: 9.8.2Q-50-XT925_VQLM-21_AmericaMovil_MX_SIGNED_S12_USAVANQUTELMXLA020.0R_VANQJBTELMXLA_P009_A013_S1FF_v2_CFCv2_fb.xml
it didn't work
what can I do????
Is your phone from Telcel Mexico originally?
I ask because on my case it is. The firmware you need to flash has to be the latest one based on your phone region, on my case I flashed the Brasil Retail. Because my phone is from Latin America. So it will depend on were your phone is from. This is all because your phone is acting up as LOCKED bootloader so flashing a version from another region is not possible.
Also because your phone got stuck on an OTA you need to make sure the version you flash is at least the same one as the OTA, newer if possible.
Rokwenelenya said:
I tried to flash this firmware, it's the more recent from telcel: 9.8.2Q-50-XT925_VQLM-21_AmericaMovil_MX_SIGNED_S12_USAVANQUTELMXLA020.0R_VANQJBTELMXLA_P009_A013_S1FF_v2_CFCv2_fb.xml
it didn't work
what can I do????
Click to expand...
Click to collapse
Worked but not completely
Ok, I flashed the rom that you recomended, the phone finally boots into android, but now is always on "emergency calls only" mode, with or without Sim card any suggestions?
Phone should be back as unlocked bootloader
If you flashed a version fine now, I'm sure that at least you should be able to go into fastboot and see your bootloader as unlocked.
If this is true, then you can go ahead and flash any version available, either being an older Stock version (downgrade) or any custom ROM of your liking, like CM 10.1. You should try them and see if you get a proper signal.
Also in your case, if your bootloader is unlocked again, I recommend you installing the version that you know worked fine for you. It won't matter that it's older than the one you flashed right now. It's just a matter of following the guide for unlocked bootloaders to downgrade versions.
Good luck! :fingers-crossed:
Phone almost repaired
Ok, I flashed the latest stock rom from telcel, the phone is no longer on emergency call mode, the wifi and data connection works fine, but it always shows that there is no reception from my carrier, I can't make calls or send sms because when I try it the phone shows "mobile network not available", the funny thing is that I can connect to de data network from my carrier. What can be causing this trouble?
Honestly I have not faced this before it sounds very weird!
I can think of two possibilities, one your phone lost it's IMEI. You should check if it's still there, either by going through configuration and Phone Information or by the "secret code" on the dialer: *#*#4636#*#*
And in the following menu go into Phone Information. The first thing you should see is your IMEI. If it's not there, look for the how to restore your IMEI thread on here. I know it's there somewhere.
The second thing I can think of is to try to force your phone into your carrier, go into Cellular Networks area and manually choose your provider, this could force the registration.
Hopefully this will be of help!
Rokwenelenya said:
Ok, I flashed the latest stock rom from telcel, the phone is no longer on emergency call mode, the wifi and data connection works fine, but it always shows that there is no reception from my carrier, I can't make calls or send sms because when I try it the phone shows "mobile network not available", the funny thing is that I can connect to de data network from my carrier. What can be causing this trouble?
Click to expand...
Click to collapse
Fastboot Error / Invalid GPT
Rokwenelenya said:
Hi everyone, my XT925 is stuck in fastboot, and whenerver I try to flash it everything just fails; RSD shows this when I try to flash:
Failed flashing process. 1/20 flash partition "partition signed" -> Phone returned FAIL
I tried to flash this stock rom: XT925_vffr-user 4.1.2 9.8.2Q-8-XT925_VQU-26 1359487946
I had already rooted the phone and unlocked the bootloader too, and when I did an OTA update all hell broke loose, the phone now goes directly to fastboot mode, and shows this:
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
It also says Phone is LOCKED, Status Code:0
I think this means that somehow the bootloader is locked but I have already unlocked it; I don't know what to do, please help
Click to expand...
Click to collapse
adolfovm said:
Hi, the same thing happened to me when I tried a ROM from a VFR on my LATAM RAZR HD. The OTA messed everything up.
You can check how I solved it on the thread I created asking for help:
http://forum.xda-developers.com/showthread.php?t=2273574
Basically you need to treat your phone as LOCKED bootloader, meaning only flashing of a version that belongs to the region of your phone and newer or same version as the failed OTA will allow you to flash. Since this is the only way LOCKED bootloader phones will flash.
Click to expand...
Click to collapse
Hello,
I have an xt926 and I tried to take the latest OTA upgrade.
My bootloader was unlocked, and I temporarily un-rooted with Voodoo OTA Rootkeeper.
My phone then got stuck in Fastboot with the same errors:
Phone is LOCKED, Status Code:0
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
I can't get the phone out of fastboot with the error messages.
The Windows Utility returned <remote access failure>
RSD returned <getvar errors>
(I tried deleting the 2 <getvar> lines in the .xml files, but then RSD said phone returned failure "sbl1.mbn".
I downloaded & installed the adb package, and I got the phone to respond to fastboot commands, but it still ended up in Fastboot with the above list of errors.
Any suggestions?
Thanks
doctorwho2 said:
Hello,
I have an xt926 and I tried to take the latest OTA upgrade.
My bootloader was unlocked, and I temporarily un-rooted with Voodoo OTA Rootkeeper.
My phone then got stuck in Fastboot with the same errors:
Phone is LOCKED, Status Code:0
Downgraded secutiry version
Update gpt_main version failed
Failed to hab check for gpt_backup:0x35
failed to load GPT
CID read failure
Invalid CID status 0x69
No SP partition found
Fastboot reason: Invalid GPT
I can't get the phone out of fastboot with the error messages.
The Windows Utility returned <remote access failure>
RSD returned <getvar errors>
(I tried deleting the 2 <getvar> lines in the .xml files, but then RSD said phone returned failure "sbl1.mbn".
I downloaded & installed the adb package, and I got the phone to respond to fastboot commands, but it still ended up in Fastboot with the above list of errors.
Any suggestions?
Thanks
Click to expand...
Click to collapse
try this and let me know if it works please. its a test build to fix this issue.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
Thanks
bweN diorD said:
try this and let me know if it works please. its a test build to fix this issue.
link
thanks
Click to expand...
Click to collapse
Thanks to you, it really work for me. My Motorola RAZR HD its now alive.
other possible solution that worked for me is
flashing this
http://sbf.droid-developers.org/download.php?device=6&file=119 (CLARO PR Jelly Bean)
Thanks!
suggestions for XT 925 please?
bweN diorD said:
try this and let me know if it works please. its a test build to fix this issue.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
Click to expand...
Click to collapse
hbenz2008 said:
suggestions for XT 925 please?
Click to expand...
Click to collapse
replace the files in the tool with the files for your region. delete all the files for the 926 if any are left in there before flashing, so they arent flashed by mistake. also if any of your file names are not exactly the same as the current files inside, you will need to edit the batch file and fix the names.
if you dont want to do all that, you can get Mfastboot and flash your files to the phone manually one at a time starting with the partition file.
unable to flash partition signed
Hi.
I downloaded the SBF from sbf.droid-developers.org/phone.php?device=6 for my region(canada).
I proceeded to try to do universal through the RSD:
Filename: UNIVERSAL.xml
Creation Date: 11/23/2014 09:11:58
File size: 1589
Sofware Version: XT925_rcica-user 4.1.2 9.8.2Q-8-XT925_VQL-12.2 1356031681 release-keysVANQUISH_U_BP_100700.220.65.33P
For Phone Model: VANQUISH_U
I got failed flash process 1/18 flash partition "partition_signed"
Before this, my phone was working fine. Got the kitkat update pushed to me and after update it was working fine. I was using it until my battery ran out so i turned it off. Afterwards, it just got stuck at the motorola logo. I tried to update it with xt926 didn't realize that my phone is xt925. Anyways, i got the bootloader unlocked. Tried the above but failed.
Any help is appreciated!
Thanks!
what did you have on your phone before flashing it the first time? you can try reflash and edit xml before doing that, delete "getvar" line from it.
hbenz2008 said:
what did you have on your phone before flashing it the first time? you can try reflash and edit xml before doing that, delete "getvar" line from it.
Click to expand...
Click to collapse
I just got help from another thread. Followed it and it worked!!
http://forum.xda-developers.com/showthread.php?t=2760840&page=72
bweN diorD said:
replace the files in the tool with the files for your region. delete all the files for the 926 if any are left in there before flashing, so they arent flashed by mistake. also if any of your file names are not exactly the same as the current files inside, you will need to edit the batch file and fix the names.
if you dont want to do all that, you can get Mfastboot and flash your files to the phone manually one at a time starting with the partition file.
Click to expand...
Click to collapse
Originally had my RAZR HD firmware Telstra Australia, having unlocked bootloader I pass Retail Retail France and then to Brazil to upgrade to KitKat, where brick. I you explain how serious the replace files.
I have the Firmware Jelly bean in all regions, but are replaced with files jelly bean? and addresses of the partitions also be accommodated to those that are in the XML file jelly bean?
edwint290 said:
Originally had my RAZR HD firmware Telstra Australia, having unlocked bootloader I pass Retail Retail France and then to Brazil to upgrade to KitKat, where brick. I you explain how serious the replace files.
I have the Firmware Jelly bean in all regions, but are replaced with files jelly bean? and addresses of the partitions also be accommodated to those that are in the XML file jelly bean?
Click to expand...
Click to collapse
i dont really understand what you are asking.
you need to figure out which is the most recent partition table you have put on the phone successfully and flash that first. nothing will work correctly until you do. after you get a successful partition flash, you can flash whatever you want, just DO NOT flash the partition file again from any other version. old builds will work on the newer partition table.
hey guys.. i have moto g xt1033 indian dual sim version. recently my device was soft brick. and it was stuck on boot loop whenever i trying to reboot after booting complete it is shutdown automatically and then restart since two week. i tried everything. flashed cm11 rom but nothing happened. also tried to flash stock firware of indian version. but i got a warning...
preflash boot validation failed...... what should i do now?? i want to relock my device... so please guys suggest me. i need help...:crying: :crying:
There is a guide pinned in the troubleshooting section
--------------------------------------------------------------
Hit the thanks button if I helped you 8)
--------------------------------------------------------------
nothing happen.. also i got a error....
version downgraded for boot
version downgraded for tz :'(
manish.kunwal said:
hey guys.. i have moto g xt1033 indian dual sim version. recently my device was soft brick. and it was stuck on boot loop whenever i trying to reboot after booting complete it is shutdown automatically and then restart since two week. i tried everything. flashed cm11 rom but nothing happened. also tried to flash stock firware of indian version. but i got a warning...
preflash boot validation failed...... what should i do now?? i want to relock my device... so please guys suggest me. i need help...:crying: :crying:
Click to expand...
Click to collapse
Try at your own risk.
http://forum.xda-developers.com/showthread.php?t=2542219
manish.kunwal said:
nothing happen.. also i got a error....
version downgraded for boot
version downgraded for tz :'(
Click to expand...
Click to collapse
Ignore the error while flashing gpt.bin because you are downgrading... Just retry the process for other errors
Asian 4.4.4 stock firmware image now available:
http://forum.xda-developers.com/showpost.php?p=54757500&postcount=348
lost101 said:
Asian 4.4.4 stock firmware image now available:
http://forum.xda-developers.com/showpost.php?p=54757500&postcount=348
Click to expand...
Click to collapse
i flashed this and relock the bootloader but even all i still found some troubles. my device reboot automatically :crying:
manish.kunwal said:
i flashed this and relock the bootloader but even all i still found some troubles. my device reboot automatically :crying:
Click to expand...
Click to collapse
Please provide a full list of fastboot commands you used.
lost101 said:
Please provide a full list of fastboot commands you used.
Click to expand...
Click to collapse
Please have a look at the pinned posts in the troubleshoot section...They describe this full procedure in detail...
I said that because I wanted to make sure all commands where used.
lost101 said:
I said that because I wanted to make sure all commands where used.
Click to expand...
Click to collapse
Oh yes all commands are used...Just make sure you type the sparsechunk command correctly....The name of that file differs from firmware to firmware...
Could someone help me restore 4.4.2 stock firmware?
MY BOOT LOADER IS LOCKED
When I turn on my phone I get this:
version downgraded for boot
failed to validate boot image
Fastboot reason: fall-through from normal boot mode
ImAustin366624 said:
Could someone help me restore 4.4.2 stock firmware?
When I turn on my phone I get this:
version downgraded for boot
failed to validate boot image
Fastboot reason: fall-through from normal boot mode
Click to expand...
Click to collapse
Flash the 4.4.4 image.
pfufle said:
Flash the 4.4.4 image.
Click to expand...
Click to collapse
My moto g never received the 4.4.4 update so do you think it will still work? Where could I find the 4.4.4 firmware?
It will work irrespective of whether you received the update or not.
Firmware image: http://forum.xda-developers.com/showthread.php?p=54872143#post54872143
Guide to Flash: http://forum.xda-developers.com/showthread.php?t=2542219
pfufle said:
It will work irrespective of whether you received the update or not.
Firmware image: http://forum.xda-developers.com/showthread.php?p=54872143#post54872143
Guide to Flash: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
It's downloading now, will report back when i'm done Thanks for helping!
pfufle said:
It will work irrespective of whether you received the update or not.
Firmware image: http://forum.xda-developers.com/showthread.php?p=54872143#post54872143
Guide to Flash: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
I will have to do this later in the day, my crappy satellite internet is acting up right now
I had this problem and sadly, after trying countless times with different firmwares the only solution I could find is to unlock the bootloader.
Then it stops giving you an error when you try to flash boot.img.
Your mileage may vary, but that is a potential fix, so keep that in mind.
ianxblog said:
I had this problem and sadly, after trying countless times with different firmwares the only solution I could find is to unlock the bootloader.
Then it stops giving you an error when you try to flash boot.img.
Your mileage may vary, but that is a potential fix, so keep that in mind.
Click to expand...
Click to collapse
The only way to unlock the bootloader with AIO moto g's is to use Jcases sunshine app and you have to be in the operating system for that
pfufle said:
It will work irrespective of whether you received the update or not.
Firmware image: http://forum.xda-developers.com/showthread.php?p=54872143#post54872143
Guide to Flash: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
My parents use the same exact phone as me on the same carrier, could I dump the firmware from their phones and then flash it onto mine?
You can take a system image via a nandroid backup and the flash it on your device
So, last week I received the update to 4.4.4 on my Republic Wireless xt1031 (locked bootloader), then quickly realized that I preferred 4.4.2. After this, I downloaded the official republic wireless 4.4.2 firmware and attempted to flash it with fastboot, which didnt do anything but wipe my data. I then retried with mfastboot, which softbricked my phone. Whenever I try to flash any of the many stock firmwares I have found (tried Republic Wireless, Boost and a couple other firmwares, including a couple 4.4.4 firmwares), it seems that everything has been able to flash over and is working other than the system image files (system.img_sparsechunk1, system.img_sparsechunk2, system.img_sparsechunk3 for the stock republic wireless firmwares). Whenever I try to flash any of the 3 over, I get an error on the phone:
hab check failed for system
Invalid PIV signed system image
and in my command prompt:
...\falcon_repw_user_4.4.2_KXB20.9-1.10-2.27_33_release-key
s-cid6.xml>mfastboot flash system system.img_sparsechunk1
target max-sparse-size: 256MB
sending 'system' (256840 KB)...
OKAY [ 8.056s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 8.464s
I've heard this can be an issue with a locked bootloader, but I've also read that people can flash stock roms with a locked bootloader as long as the firmware is specifically for your phone. Does anyone have any advice on this issue? I'm just about at my wit's end here. I have tried at least 6 different firmware, I've intentionally hardbricked it by destroying the bootloader, then reflashed it with blankflash and Motoflasher on two separate tries and still no luck. Currently, it goes through the boot process but just boots to a black screen. Any help would be greatly appreciated.
I had a nightmare with this problem, I think it is an issue with your partitions, do you have an unlocked boot loader? If so try installing twrp recovery and check the sizes of your partitions especially /system partition and post results, I never fixed the issue I eventually got it replaced by the store I bought the phone from.
PS unlocking boot loader will void your warranty so if possible try and get the store to replace device.
Sent from my XT1039 using XDA Free mobile app
jasond567 said:
I had a nightmare with this problem, I think it is an issue with your partitions, do you have an unlocked boot loader? If so try installing twrp recovery and check the sizes of your partitions especially /system partition and post results, I never fixed the issue I eventually got it replaced by the store I bought the phone from.
PS unlocking boot loader will void your warranty so if possible try and get the store to replace device.
Sent from my XT1039 using XDA Free mobile app
Click to expand...
Click to collapse
My bootloader is not unlocked and Republic Wireless does not allow the bootloader to be unlocked. One of the reasons I was trying to downgrade was because I was going to use sunshine to unlock the bootloader, but it doesn't work on 4.4.4. I got the gpt.bin from the official update for 4.4.4 on Republic Wireless that someone had posted here on xda, as it was the noly one that would flash successfully that I have found. According to the 4.4.4 debricking guide on here, you can flash the gpt.bin and motoboot.img from a 4.4.4 firmware, then after that flash the 4.4.2 files from the stock firmware of your choice.
Ahhh I see that's The same problem I had I followed most online suggestions from XDA and others and nothing worked for me so I got a replacement phone, is that possible for you to do, fingers crossed that if you do it will come with 4.4.2
Sent from my XT1039 using XDA Free mobile app
I am getting a replacement phone sent, hoping for 4.4.2!!!
Great news, I have my fingers crossed for you
Sent from my XT1039 using XDA Free mobile app
wulfep said:
I am getting a replacement phone sent, hoping for 4.4.2!!!
Click to expand...
Click to collapse
Did you get it unlocked?
wulfep, I am exactly in your situation. Were you able to find a workaround that allows you to flash the Republic Wireless Moto G 1stgen XT1031 phone with an alternate firmware, of the same Android Lollipop version but for other Spring-based MVNOs (i.e. Boost, US Cellular, Verizon etc)? And considering that the phone has the damn Motorola bootloader locked !?
Thanks.
This is a newest MIUI 9 China Beta "s TZ &Modem
Baseband:BO.2.6.c1.2-0818_1948_87b78d2
Link:https://yadi.sk/d/wdmLsruk3MSQJr
Flashable ZIP File
Please Use TWRP
more info about updates?
is it safe, nothing to do with root/bootloader?
EDIT: DO NOT flash this on official Lineage with Lollipop bootloader, you will end up bootlooping on start, unable to get even into recovery after restart, only possible to get into fastboot which is also pretty useless, since your bootloader is locked
any idea how to recover back without going through flashing all the ROM and everything? is it possible to flash just firmware through fastboot?
EDIT 2: wanted to flash at least recovery in case it was overwritten, but I am getting
Code:
fastboot flash recovery twrp.img
target reported max download size of 536870912 bytes
sending 'recovery' (40704 KB)...
OKAY [ 1.343s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 1.362s
PeterMarkoff said:
more info about updates?
is it safe, nothing to do with root/bootloader?
EDIT: do not flash this on official Lineage, you will end up bootlooping on start, unable to get even into recovery after restart, only possible to get into fastboot
any idea how to recover back without going through flashing all the ROM and everything? is it possible to flash just firmware through fastboot?
EDIT 2: wanted to flash at least recovery in case it was overwritten, but I am getting
Click to expand...
Click to collapse
kindly type, fastboot oem device-info on fastboot mode with phone pluged in,hope it didnt lock your bootloader.
yes, that piece of **** locked my lollipop bootloader, had to flash fastboot miui rom to unlock it and lost my data
PeterMarkoff said:
yes, that piece of **** locked my lollipop bootloader, had to flash fastboot miui rom to unlock it and lost my data
Click to expand...
Click to collapse
Have you unlocked your phone officially?
Because i flash this too and had no problem at all.
?
unofficially, but that never caused problems with previous updates, I guess this firmware us somehow compatible only with Nougat bootloader and locks lollipop bootloader
PeterMarkoff said:
unofficially, but that never caused problems with previous updates, I guess this firmware us somehow compatible only with Nougat bootloader and locks lollipop bootloader
Click to expand...
Click to collapse
YES,This is a Nougat Bootloader,you must unlock bootloader in official tools after you install this file in twrp
Put on a BIG ****ing warning about it being incompatible with lollipop bootloader..
And I was like "huh, my phone very smooth today, maybe I'll do a backup and try that new firmware out, shouldn't be a big deal, I've done it before np" — now it's ****ed....
(Yes I unlock the bootloader, but if I go back to marchmellow it's constant restart+bootloop.
buktore said:
Put on a BIG ****ing warning about it being incompatible with lollipop bootloader..
And I was like "huh, my phone very smooth today, maybe I'll do a backup and try that new firmware out, shouldn't be a big deal, I've done it before np" — now it's ****ed....
(Yes I unlock the bootloader, but if I go back to marchmellow it's constant restart+bootloop.
Click to expand...
Click to collapse
****ing ask before do something if you're not so sure about it.
Has anyone noticed any improvement with the new radio?
Hello. Has anyone got a link to the latest firmware available for a MI4C. I'm not after the official ROM, just firmware workable with ROMs. I think the last update I done was through andropax link https://androidfilehost.com/?w=files&flid=155424 is there a way I can also find out which firmware I have installed I forgot.
Is this the latest > https://androidfilehost.com/?fid=890278863836288705
fw_libra_miui_MI4c_V9.5.2.0.NXKCNFA_81f363e363_7.0
& will it run dev ROMs?