Related
OUT OF DATE USE THE ONE CLICK 1.85 ROOT TOOL IN THE FORUMS
As the ROM chefs go to work, we want to be sure that we are ready to flash the ROMs when they come to be available! This guide will help you set up your phone so that you can flash custom ROMs.
After this process you will have a phone on the latest firmware (1.85 at the moment) with bootloader unlock, rooted, and busybox installed.
This guide assumes you are on a root friendly firmware (as of now, it is firmwares 1.82.502.3 and below).
This is really going to be done in a four step process. First we need to root the device in order to access the place where the CID is stored so that we can change it and get unlocked. After changing the CID, we can unlock via htcdev.com. Then we can go on to installing a custom recovery and finally rooting!
From there I will give you some tips on installing ROMs.
NOTE: THIS PROCESS IS EXTREMELY DANGEROUS. IT MAY BE A BIT CONFUSING. READ OVER THE STEPS BEFORE STARTING. IF YOU DO NOT THINK YOU WANT TO RISK YOUR DEVICE BECOMING A BRICK THEN DO NOT ATTEMPT THIS. THIS VERY EASILY COULD RUIN YOUR DEVICE.
BACKUP EVERYTHING BEFORE STARTING AS EVERYTHING ON YOUR DEVICE WILL PROBABLY BE WIPED.
I, XDA, AND THE ORIGINAL TOOL CREATORS DO NOT TAKE RESPONSIBILITY FOR ANYTHING THAT HAPPENS TO YOUR DEVICE. IT IS SOLELY YOUR RESPONSIBILITY FOR WHAT YOU DO TO YOUR DEVICE.
Click to expand...
Click to collapse
Your warranty will be void if you unlock the bootloader. If you just root though then you can return to 100% stock by running the RUU.
This guide is for Windows only at the moment though I will try to post Mac and Linux guides at some point.
ORIGINAL TOOL THREADS:
One Click Root for 1.82 and below: http://forum.xda-developers.com/showthread.php?t=1644167
Spoof CID Script: http://forum.xda-developers.com/showthread.php?t=1672284
I will try to keep this as up to date as possible! Taking a visit to the index of the development forums (http://forum.xda-developers.com/showthread.php?t=1671237) is also a good idea!
Last Updated: 5/28/12
0. Getting the prerequisites:
Download the package at the bottom of the first post to get started.
Extract the package somewhere you will remember (like on your desktop).
Connect your device via USB and make sure you have USB Debugging enabled under settings.
Click to expand...
Click to collapse
1. Root your device
1. Open the folder you downloaded and navigate to the "root" directory.
2. Double click on the root-windows.bat file
3. Let the root run and do not touch your device. It will reboot several times- do not touch it or you may brick your device. Just let it do its thing and eventually after around 3 minutes you will have a rooted device in your hand.
Click to expand...
Click to collapse
2. Get the unlock token
In order to unlock the bootloader we will need to change a value called the CID. This will allow the htcdev.com site to unlock our phones.
1. Go to the downloaded folder and go to the "change_cid" folder.
2. Click on the "Spoof-CID.bat" file. Follow the instructions. Your CID will change from CWS__001 (stock AT&T CID) to 11111111 (called "SuperCID," will allow you to flash anything)
3. Log in to htcdev and go here: http://www.htcdev.com/bootloader/unlock-instructions (NOTE: This skips the agreements you need to click through as some of the buttons on their website are wonky. Doing this assumes you agree to their policies that are listed there)
4. Follow the instructions very carefully (they are written very well) untill the point where you get the file "Unlock_code.bin" via email. Stop there.
5. You should now have the file for bootloader unlock. MAKE SURE TO SAVE THAT FILE "Unlock_code.bin" TO THE "generic" FOLDER IN THE PACKAGE YOU DOWNLOADED! YOU WILL NEED IT LATER.
Click to expand...
Click to collapse
3. Run the RUU to update to latest firmware
1. Download the latest RUU from the xda forums (should be an .exe file)
Currently it is version 1.85.502.3 and you can download it here:
http://briefmobile.com/download-htc-one-x-att-1-85-update
2. Follow its instructions very carefully. It will take approximately 20 minutes to complete. BE PATIENT. IF YOU UNPLUG YOUR PHONE HERE YOU WILL GET A BRICK.
3. Let your phone reboot and go through initial setup again
Click to expand...
Click to collapse
4. Unlock your bootloader using Unlock Token
1. Navigate to the "generic" folder in cmd (you should have added the Unlock_code.bin file to this folder already) and plug your phone in in fastboot mode. To do this, first shut off your phone. Wait for it to turn off. Then hold the volume down button. Press the power button for 3 seconds while still holding the volume down key. Let go of the power button but keep holding the volume down button untill you see a white screen with a bunch of small text on it. Use the volume up and down keys and the power button to select the FASTBOOT option. Plug your phone into your computer. Then wait for the FASTBOOT text to turn into FASTBOOT USB.
2. Type the following into cmd on your computer:
fastboot flash unlocktoken Unlock_code.bin
NOTE: This step might take quite a few tries. For some it works on the first time. For others, it may take around 20 times. Just keep typing in the command until you get a sucessful flash. We aren't sure why it does this at the moment but just keep trying and don't give up.
3. Use the volume keys to say that you do want to unlock your bootloader and wait for reboot
4. Bootloader should be unlocked! Congrats, most of the grunt work is done! Go to Settings - Developer Options - Enable USB Debugging. This will allow us to continue
5. Re-set up phone and enable USB debugging again
Click to expand...
Click to collapse
5. Install a custom recovery so that we can gain root access
1. Currently there are two recovery options: ClockWorkMod Touch and TWRP (TeamWinRecoveryProject). Both are pretty much the same as they both use touch input but TWRP does have some other nice features like a built in file browser and more. It is also more touch optimized. ClockWorkMod is more "old school" and I personally feel more comfortable using it, but using TWRP is fine as well. It doesn't really matter which recovery your choose, both are good choices. Download whichever one you want below:
CWM Touch: http://forum.xda-developers.com/showthread.php?t=1677304
TWRP: http://forum.xda-developers.com/showthread.php?t=1677447
2. Drag the .img recovery file you just downloaded into the "generic" folder
3. Connect your phone via fastboot
4. Type the following:
fastboot flash recovery <insert name of recovery .img file here>
Replace the stuff between the <> with the name of the file you just downloaded
5. Wait for your device to reboot. Then type into cmd which is cd'ed to the "generic" folder:
adb reboot recovery
6. Make sure your recovery works as soon as it is done loading and then press "reboot system"
7. Follow its instructions
Click to expand...
Click to collapse
6. Root your system
1. Connect your phone as a "Disk Drive" and drag the "root.zip" file in the "root" folder to your phone's memory
2. Reboot into recovery with the adb command (adb reboot recovery)
3. Go to install zip from sdcard and navigate to the zip file you downloaded. Say "yes" and watch it flash
4. Reboot system now
5. Go to the play store and download any app that has "Busybox installer" in its name (the one by JRummy16 works good I believe)
Click to expand...
Click to collapse
If all goes well, you should be sitting at an AT&T HTC One X which is on the latest RUU leaked firmware (1.85.502.3 at this moment), rooted, busyboxed, and unlocked.
Congrats!
If you want to flash any ROMs, download the .zip file of the ROM, place it on your phones memory, and then install the zip like you did to the root.zip file.
Enjoy your AT&T HTC One X!
CREDITS:
kennethpenn: For initial root, getting all the RUUs from the "source" and for giving the HTC One X's situation prime press appearance on his website, BriefMobile.com
grankin01: For finding out how to edit the CID originally
designgears: For creating the One Click Super CID tool for bootloader unlock
paulobrien: For porting CWM Touch to our device
sk08: For leading the way in terms of MODs and organizing an S-OFF thread to get this thing fully ours
JSLEnterprises: For initially being there to help organize a bootloader unlock
Team Nocturnal: For their awesome ROM
Click to expand...
Click to collapse
If you want to thank or donate to someone, please do not do so to me. The people above are the ones that deserve the thanks and the donations to encourage them to keep doing the fantastic work they have been doing! I'm just a high school student
Some common terminology:
Deoxdexed: OEMs package their apps with .odex files because they are more optimized for your device. However, this makes the file uneditable by developers and things like mods cannot be used with odexed ROMs. A ROM with "deodexed" as a feature means it is easier to use mods with that ROM
Busybox: A collection of linux tools that are helpful for flashing ROMs and doing other basic Android tasks
RUU: ROM Update Utility, made by HTC, completely reflashes device firmware, useful if you get bricks. Only for Windows.
Root: Allows you to edit system level files
S-OFF: (currently unattainable) Security-OFF, it is a "feature" in HTC phones that allows us to modify almost any part of your system.
Unlocked Bootloader: Allows us to flash custom images to the device.
Click to expand...
Click to collapse
As I understand and appreciate the work put in this thread, do we need another how to? Using the index sticky alone anyone should be able to root/unlock/flash their device. There's already scripts for everything and virtually no ADB required for nubs.
I would assume with the other info already in this section if someone can't figure out how to flash their phone, then they don't need to flash at all.
HydroSkillet said:
As I understand and appreciate the work put in this thread, do we need another how to? Using the index sticky alone anyone should be able to root/unlock/flash their device. There's already scripts for everything and virtually no ADB required for nubs.
I would assume with the other info already in this section if someone can't figure out how to flash their phone, then they don't need to flash at all.
Click to expand...
Click to collapse
Wasnt sure, there are still a few people asking how to do it since it is a bit complicated with the 1.85 update breaking root so I just compiled everything into a master one.
And yeah, I use a lot of the scripts in the package I put for download.
Anyway, mods do what you think with this thread! And this might be in the wrong section, wasnt sure if it goes in general or development.
Please keep this up. As it is the most aggregated list of instructions, I'm sure it will help many who have just gotten their phone. Great work by the way.
HydroSkillet said:
As I understand and appreciate the work put in this thread, do we need another how to? Using the index sticky alone anyone should be able to root/unlock/flash their device. There's already scripts for everything and virtually no ADB required for nubs.
I would assume with the other info already in this section if someone can't figure out how to flash their phone, then they don't need to flash at all.
Click to expand...
Click to collapse
As I agree with you, a "one stop shop" that can be pointed out to for the noobs who got their mommy's to buy them their cool phone should at least keep the redundant questions to a minimum.
you cant ruu WITH a UNLOCKED bootloader these directions are wrong there would need to be a relock step added in.
ALSO THE CWM STEP NEED A ROOT FOR IT TO WORK LOOK AT THE PAGES
READ UP ON THE STUFF BEFORE YOU MAKE A GUIDE BECAUSE THIS IS WRONG
squishy5 said:
you cant ruu WITH a UNLOCKED bootloader these directions are wrong there would need to be a relock step added in.
ALSO THE CWM STEP NEED A ROOT FOR IT TO WORK LOOK AT THE PAGES
READ UP ON THE STUFF BEFORE YOU MAKE A GUIDE BECAUSE THIS IS WRONG
Click to expand...
Click to collapse
Locked boot loader yes.
Root for cwm no.
Sent from my HTC One X using xda premium
squishy5 said:
you cant ruu WITH a UNLOCKED bootloader these directions are wrong there would need to be a relock step added in.
ALSO THE CWM STEP NEED A ROOT FOR IT TO WORK LOOK AT THE PAGES
READ UP ON THE STUFF BEFORE YOU MAKE A GUIDE BECAUSE THIS IS WRONG
Click to expand...
Click to collapse
Why don't you read before you comment on things like this?
I never "Unlock the bootloader"
I simply get the Unlock token from HTC.
So stop acting like you know everything, because you dont
Don't ever use caps with me and expect me to come back with a nice response. I put this out for the community, not for some kid who thinks he knows it all to come back and say that I did it wrong when he didn't even read the post properly.
And you don't need root to install CWM, just an unlocked bootloader.
Stop calling my stuff wrong if you yourself don't even know what is right
rohan32 said:
Why don't you read before you comment on things like this?
I never "Unlock the bootloader"
I simply get the Unlock token from HTC.
So stop acting like you know everything, because you dont
Don't ever use caps with me and expect me to come back with a nice response. I put this out for the community, not for some kid who thinks he knows it all to come back and say that I did it wrong when he didn't even read the post properly.
And you don't need root to install CWM, just an unlocked bootloader.
Stop calling my stuff wrong if you yourself don't even know what is right
Click to expand...
Click to collapse
He put his foot in his mouth, apology should be coming oh and Good job man, Good job. Thanks for the work, this should be a sticky.
This is a great write up and would have been extremely helpful last night. I will admit I have done a lot of reading before I unlocked the bootloader and updated to 1.85, but it was still very confusing at some points. The htcdev site actually gave me the most trouble because I didn't realize most of the steps were completed and I could skip all the way to entering the token and the site was simply used for entering the token and getting the unlock file.
And yes, I almost said the same thing about the relock step. I had to read it twice to realize you didn't unlock yet. That's another thing that confused me last night was unlocking/relocking immediately.
I think this should be a sticky and all the other tutorials and such should be deleted. This is a perfect summary IMO and will use it when I unlock my friends one x
Sent from my HTC One X
My problem with this is that you packaged it all up while the individual threads for each thing are updating and you are severing up potentially outdated scripts.
designgears said:
My problem with this is that you packaged it all up while the individual threads for each thing are updating and you are severing up potentially outdated scripts.
Click to expand...
Click to collapse
I agree. While it is nice to have a all-in-one, you should be linking to the threads since they are updating them on a daily basis instead of linking to their scripts. Ive already had to change JeepFreaks script this morning as he updated it. It would make your world a lot easier if you did it that way, and also not risk giving some new user outdated scripts.
I think this should go in the General section as the first few pages should redirect to the original threads anyway.
Red5 said:
I agree. While it is nice to have a all-in-one, you should be linking to the threads since they are updating them on a daily basis instead of linking to their scripts. Ive already had to change JeepFreaks script this morning as he updated it. It would make your world a lot easier if you did it that way, and also not risk giving some new user outdated scripts.
I think this should go in the General section as the first few pages should redirect to the original threads anyway.
Click to expand...
Click to collapse
Sure thing, I will add to the original post for the links.
Also I will try to keep this updated, but yeah I might not catch all the updates
Thank you so much Rohan! Really appreciate it! Took me about 4 hours to get this done but it was worth it. Now to install cleanrom. Thanks again. This is my first time doing something like this.
Duse ijuat saw this and I'm going to do this and flash clean from when I get home and I read through this I honestly love you for doing this it helps more than you think thanks a lot
Deffinitlet should be stickied
Sent from my HTC One X using XDA
These are the best instructions! Wish i had them when all this shenanigans started. Thx
ethantarheels123 said:
Please keep this up. As it is the most aggregated list of instructions, I'm sure it will help many who have just gotten their phone. Great work by the way.
Click to expand...
Click to collapse
I agree. This guide is very helpful for me. I consider myself to be fairly computer literate and have flashed ROMs on previous phones, but I am a complete n00b to android and linux. Looking around some of the other threads -- it appears to me that there are many people who could have much confusion resolved by reading this. Thanks for the thread.
-- Jon
Not quite sure what's going on with my update...
I'm using the exe that updates the RUU and it gets stuck on the "sending to phone" step. Reboots the bootloader once, gets stuck again (as far as I can tell , nothing is ever sent) and then gives me an error telling me "The ROM Update Utility cannot update your Android Phone. Please get the correct ROM Update Utility and try again"
i've got the correct drivers installed (was having some trouble related to that a couple days ago but have since figured it all out ) would it be better to just do the update manually? (On my evo you just change the update file to Update.zip and it automatically installs it for you when you boot into bootloader)
maybe I'll have to look into it further, but just curious if anyone's run into this issue or figured out how to get past it as of yet...
Edit: Just an update- I'm betting its because I forgot to relock my bootloader before updating. So anyone who's already completed SOME of the steps in the second post here, make sure you relock your bootloader if you haven't already done so.
Edit1.5: This assumption was correct and the bootloader is now unlocked.
Edit 2- Almost done here... Busybox wont install. Tried two different apps, neither one worked. No indication as to why (got very vague error messages to the effect of "busybox was not installed")
Edit 3- FIXED- Ok, figured it out. As far as I can tell, the process should be Root first, THEN install busybox. It doesn't work without root privelages (at least that was my experience here)
Hey guys!
To start, I want to say what an amazing place XDA is and how much information and knowledge you can get from here and how awesome the moderators are. I don't think I could ever find another amazing and/or helpful community such as those found here! Thanks to all who have helped me out with my Android issues!
Now to my issue and I apologize ahead of time if there is another thread (or related thread) found in the forum.
As the title states, I have a 2013 Motorola Moto G XT1031 Boost Mobile device. I had upgraded it to Lollipop 5.0.2 or 5.1 when it came out (I can't remember which one it was) and I had then decided to root it. I can say that I believe I was successful in rooting the device because I was able to install Supersu and use RootChecker to verify the install. Everything was going okay until i decided to research and eventually install a custom recovery and attempt to install a custom ROM. Well, let's just say that the recovery install was a bust...
In doing my research for a custom recovery, I found that TWRP had a custom recovery for my phone and apparently for my firmware via TWRP's app on the Play Store. So, I searched for my device in their in-app search for a custom recovery, downloaded it and installed it from the app. Now, my gut told me that this probably wouldn't work and that I should probably be installing a custom recovery via CLI. Nope. I didn't do this. Instead, like I said, I installed a custom recovery from the app itself. That screwed things up for me. I have no idea if it was the install, but my phone began to act incredibly strange. When in the TWRP recovery, my screen had this line that would continuously scroll from top to bottom. It wasn't a completely solid line, but it was transparent, almost like an empty thermometer glass stick was going down the screen. It was weird and not normal. I figured the phone's software was partially broken. It only did this in the TWRP recovery. Nowhere else did this happen. It was slightly annoying.
Later on I decided to install a custom ROM. Again, I did the necessary research to find out if there were any ROMs available for my phone (using XDA of course and others) and found that there were a few out there. So, I downloaded one (wish I could remember which one) and attempted to install it...keyword there. After attempting the install, my phone would not boot. Like at all. Dead. So back to the drawing board I went to try and reverse the damage. Using XDA (ironically) and a plethora of other sites, I tried to resurrect my phone and bring it back to life. After countless hours of trying and trying and trying and more and more research, I just gave up. The phone is dead. Great. $170 spent on a phone to break it a year later.
It's been roughly 4-5 months since I have attempted to redo the process and after another minor attempt, somehow I was able to remove the root completely, including the custom recovery and ROM. I don't know what the heck I did, but it worked....sort of. The phone is now stuck in a bootloop on the logo and sometimes the "bootloader has been unlocked" screen when try and factory reset the phone from the default recovery. When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set and to have this and that. I have this and that installed on my PC, but obviously cannot enable USB-debugging which is needed for ADB and fastboot to recognize my device.
So, my question for anyone who would like to help me out is this: what are my options? Is the phone recoverable? Is there any way I can get ADB/fastboot to see my device and finally install the stock firmware on the phone? I have the proper drivers installed and ADB/fastboot are on my PC. Any help would be amazing, even if you have to tell me to junk it.
blckdragn22 said:
When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set
Click to expand...
Click to collapse
This is incorrect, where did you read that? To reinstall the stock firmware using fastboot, you must be able to boot to the bootloader menu only.
I heard this from a few websites actually, although I could never find a situational fix for my phone. I am trying to restore back to Lollipop without a custom recovery, because within the past hour I found out TWRP was never fully removed when I tried booting into recovery from the AP Fastboot menu when doing to power+vol down option. The TWRP logo shows for about 10 seconds and then the phone tries booting normally, showing the unlocked bootloader warning.
So, yes I can boot into the bootloader menu all day long with no problems. It's just an selection I make doesn't get me anywhere. My question I guess now is: how do I go about reinstalling stock firmware via the bootloader menu. I have Minimal ADB and Fastboot installed on my PC. If I need the full ADB, I can download that. And of course I'd need the firmware, too.
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
This thread had the firmware I was looking for thank you. I believe I have the flashing stock firmware process down, I hope. I'l refer to the guide if I need help. Thank you so much!
_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
I am trying to follow the steps listed here http://forum.xda-developers.com/showthread.php?t=2542219&page=35 and for some reason I cannot run any of the commands pertaining to the sparsechunks. This is what I get:
Is there anything you could tell me about that?
Edit: I was able to figure what the issue was when trying to write the sparsechunks. I had to insert a "." after 'sparsechunk' because that is how the file is named in the folder. However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
blckdragn22 said:
However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
Click to expand...
Click to collapse
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
_that said:
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
Click to expand...
Click to collapse
I will try that. There was a ...sparsechunks.0 as well apart from sparsechunks.1, sparsechunks.2 and sparsechunks.3. Shall I include that, too?
And adding the screenshot was an amateur mistake. My bad.
@_that this worked like a charm. Phone is 100% working ans usable now. Incredibly helpful. Thank you so much!
It seems no matter how much this topic gets discussed, people still use old methods and they either fail, or they break something like WiFi, Mobile Data, infinite bootloop, or getting stuck on the boot logo... THIS DOESN'T HAVE TO HAPPEN and it IS repairable, usually without reflashing the entire image. The problem comes from using an old method, outdated SuperSU, or incorrect method. This guide will help you correct most issues, or help you to flash root correctly the FIRST time.
I have written rooting guides for multiple Moto device, and I have owned many Moto devices as well, so I have some idea what I am saying and I have tested these methods extensively, they work.
------------------------
This guide covers ALL Moto X 2015 models that can be bootloader unlocked and have TWRP available, it doesn't matter if it is the XT1575 or XT1572, the method is identical (untested on Chinese XT1570, but it should work). In fact, this method will work on all 2015 and 2016 series Moto phones running Marshmallow, including the Moto E, X, G3, G4, and Z with the appropriate TWRP image.
Please read completely and make sure you understand each step and how to do it, if you don't get something search the thread or ask an open question, no offense, but do not PM me with a question because you think it is too stupid to ask in public (we all started as noobs), or because you want me to hold your hand and do it for you, I will politely tell you no and ask you to post in the thread.
If you are coming here because you followed an old guide where you used a special boot.img file and now you have no service (WiFi and/or mobile data) and you don't have a TWRP backup to restore first, well, the RIGHT way to fix it is to reflash the current stock firmware image and start over... why? Because the various "help" people give to have you flash the radio files that match the kernel (ie. boot image) that was patched for the old style root method, has now put you in a mismatched firmware environment and could potentially brick on the next OTA. If you are in this situation and don't know for to properly fix it... go to the FAQ section in post #3 below (WIP-incomplete).
If came are coming here to root the first time, or you just thought you could flash SuperSU and reboot and now stuck in either a bootloop or stuck on the boot logo... Your in luck, read on, because we can fix that in a jiffy!
tl;dr version for advanced users: Skip to "How to do it" section to root, or "Do the prep" section to fix a bad root.
I am writing this tutorial because there are still lots of failed root attempts using older "standard" methods that do not work on this device. I also do not like the "one click" root methods, because they can and do fail (KingoRoot will brick a Moto X P/S, regardless of what it's web page says), and when they do people have no idea how to fix it. The manual way is not difficult, and it teaches you how to work on, fix, and use your device on a level above that of the average smartphone user.
I will only cover the details of rooting, the prerequisites are covered elsewhere in detail and I will link to reliable sources for the information. Specifics of the prerequisites are outside of the scope of this tutorial, but are open for discussion in this thread.
Prerequisites:
1) Device must have an unlocked bootloader. See Moto - Unlocking the Bootloader for more info.
NOTE: Performing this prerequisite will give you all the tools (fastboot) and drivers needed to continue, and wipe your device, meaning erase all your information and programs. Make sure to backup any important data first. This step will also permanently void your warranty once an unlock code has been issued by Moto, it doesn't matter if you even use it, your warranty is done.
2) You need to have TWRP installed or one-time booted via fastboot. CWM and other recoveries will NOT work at this time. See the official TWRP pages for clark here. I will NOT teach you how to use TWRP in this thread, if you are going to root you need to understand that your self, but if you get in a real bind I may knudge you in the right direction. I will tell you that there are two modes, flashed or booted, the later is much better if you plan to take an OTA later as long as you don't do something stupid like flash Xposed.
3) You need a copy of the latest STABLE SuperSU ZIP from Chainfire's site on the internal storage or SD card of your device, you can always fine the latest stable version here: https://download.chainfire.eu/supersu/ As of this posting update UPDATE-SuperSU-v2.82-20170528234214.zip (version 2.82) is the current stable version and it has been tested and verified to work.
NOTE: Unless otherwise stated, do not use a beta version for rooting Moto devices. SuperSU versions with even numbers are stable versions, while odd numbered versions are beta editions.
4) Reboot and start TWRP recovery, the method you use to do this doesn't matter (boot or flash).
5) Backup your device with TWRP to your SD card, even if you just unlocked and the phone is as blank as a printed page from a 1988 HP DeskJet printer with it's original cartridges still installed, backup... You will always have a good point to return to if the worst happens.
Do the prep:
Note that the hidden Do the prep section is ONLY for repairing a bad flash, SuperSU has been updated and as of version 2.79 the hidden section should no longer be needed for general purpose root on a working device, you just flash SuperSU. If you flashed an older version and are bootlooped, perform this section and continue.
Now, the procedure is the same whether you are trying to root the first time, or you did it the old way just flashing SuperSU and are now not able to boot...
In TWRP, when you have your backups and are ready to root, first go to Advanced and open the Terminal, in the terminal type this EXACTLY as shown:
Code:
echo SYSTEMLESS=true>>/data/.supersu
Now press ENTER (there is no confirmation returned). You can verify this worked correctly by entering 'cat /data/.supersu' in the terminal and see if it returns "SYSTEMLESS=true", if not, you did it wrong, try the echo command again. Now press exit/back and press the HOME key.
After you have successfully entered the command in the TWRP Terminal you may continue
How to do it:
Go to Install and select the SuperSU zip file you downloaded from Prerequisite #3 and swipe to flash it and reboot. No need to clear caches or anything else but you are welcome to if you wish. You can install SuperSU updates normally through the app going forward (as of this posting).
Why do I have to do this???
Again, this is somewhat dated information and only applies to fixing a bootlooping device when improperly rooted.
For whatever reason, the install script for SuperSU does not recognize that this device (like many others) requires a systemless root installation. By creating /data/.supersu in the TWRP recovery environment, the SuperSU install script parses the file and sees "SYSTEMLESS=true" and ignores what it auto-detects and forces a systemless root installation.
Hope this is helpful to someone!
As always, if this is the first time you have booted TWRP or attempted root... BACKUP IN TWRP FIRST!!! Once the system is modified, it cannot be undone (easily) and you will always have a known good starting place if the worst happens.
DISCLAIMER: I am not responsible for anything that happens... Your device, your responsibility, no matter what happens... Although all the information here has been tested and is known to work with no issues except where noted, things occasionally can and do go wrong and we cannot foresee every possible scenario or circumstance.
If you need assistance, we need detailed information about what what's going on and what you have tried to do... Please provide details including:
1) Device model number and Android version
2) TWRP version
3) SuperSU version
4) Output of 'cat /data/.supersu' from TWRP terminal
And a copy of recovery.log if possible, and any other pertinent information you can think of. Without specific information there is nothing that I can do to assist you and request for help may be ignored.
EDIT: Photos added showing what a proper command and flash should look like. Note that in picture 1 the exit command is not needed, you can just back out. In pictures 2 and 3 a proper flash of SuperSU is shown, note that system-less mode is specified and the boot image is patched, this is what should occur. It is normal for it to loop once or twice, but that is it, first boot could take 10 minutes plus.
NOTE: I no longer own this device, but will help where I can and will keep this thread open to assist users where ever possible, but I no longer have a device to test/verify things with.
Alternate Method #1
Some users have noted that the above method doesn't seem to work, we don't know why as it seems inconsistent but we can't pin it down specifically to user error, certain model number or build, or anything else, as it works 98% of the time...
But if the above method fails, the alternative is to download and copy to SD card or internal storage SuperSU 2.62-3 ßeta version available here and flash it through TWRP like normal.
Reserved - FAQ (oops, guess I already did that)
I'm so glad I found this thread! I've been procrastenating fixing my phone because of all the crappy methods. This one very easy to follow!
But still can't manage to get my WiFi working
I don't get it. But somehow my nandroid backup failed too, because it's only some 2.X MB big and I don't seem to recover anything....
So I guess I'll have to keep trying..
FYI:
1) Moto X Style 6.0
2) TWRP 3.0.2-0
3) Tried both 2.78 and 2.62. Currently running 2.62
4) SYSTEMLESS=true
Jorinde123 said:
I'm so glad I found this thread! I've been procrastenating fixing my phone because of all the crappy methods. This one very easy to follow!
But still can't manage to get my WiFi working
I don't get it. But somehow my nandroid backup failed too, because it's only some 2.X MB big and I don't seem to recover anything....
So I guess I'll have to keep trying..
FYI:
1) Moto X Style 6.0
2) TWRP 3.0.2-0
3) Tried both 2.78 and 2.62. Currently running 2.62
4) SYSTEMLESS=true
Click to expand...
Click to collapse
Find the latest rom image for the version you have installed, and flash the radios with fastboot.
acejavelin said:
Find the latest rom image for the version you have installed, and flash the radios with fastboot.
Click to expand...
Click to collapse
Thanks for your quick reply. Tried that, didn't work.. The ROM i'm currently running is MPH24.49-18 btw... I'm now trying it the hard way, just reverting everything step by step. But the first step (flashing gpt.bin) is already giving me the preflash error. This is going to be a lot harder than I thought and it's been too long since I've been flashing these things.
Used to flash my Moto Milestone and my Sony X10, can you imagine.
Jorinde123 said:
Thanks for your quick reply. Tried that, didn't work.. The ROM i'm currently running is MPH24.49-18 btw... I'm now trying it the hard way, just reverting everything step by step. But the first step (flashing gpt.bin) is already giving me the preflash error. This is going to be a lot harder than I thought and it's been too long since I've been flashing these things.
Used to flash my Moto Milestone and my Sony X10, can you imagine.
Click to expand...
Click to collapse
Because you are not on 49-18, if you were on the latest OTA for 6.0 you were on 49-18-4. Pre-flash validation failure confirms your using the wrong version. Look in my sig for the return to stock thread, there are links to current roms and discussion of the 'preflash validation error'.
Wasn't systemless method only intended for not altering the system partition in such way not to break compatibility with Android Pay and such apps that don't allow root?
Maybe I got it wrong when I first saw the appearance on the scene of systemless root. From what you are saying the auto detect it's supposed to detect with which method the device is compatible (not only detects if system was already modified? let's say like by TWRP).
I wasn't able to flash SuperSu newest stable versions either, all ended up stuck at boot, except for the 2.62 version (updatable later through playstore and binaries thorugh app via normal update). Honestly I haven't tried systemless as for me I through it was a waste (as said I through it wasn't meant for other purpose).
ATM I'm using CM's own root, but I will report as soon as I will try SU again. I never had problems with modem/wifi with SU, only that it didn't boot on newer stable builds.
Got the Moto X Pure a few days ago. It came with 6.0. This procedure works. Thank you!
ban.codrut said:
Wasn't systemless method only intended for not altering the system partition in such way not to break compatibility with Android Pay and such apps that don't allow root?
Maybe I got it wrong when I first saw the appearance on the scene of systemless root. From what you are saying the auto detect it's supposed to detect with which method the device is compatible (not only detects if system was already modified? let's say like by TWRP).
I wasn't able to flash SuperSu newest stable versions either, all ended up stuck at boot, except for the 2.62 version (updatable later through playstore and binaries thorugh app via normal update). Honestly I haven't tried systemless as for me I through it was a waste (as said I through it wasn't meant for other purpose).
ATM I'm using CM's own root, but I will report as soon as I will try SU again. I never had problems with modem/wifi with SU, only that it didn't boot on newer stable builds.
Click to expand...
Click to collapse
No, although that was one thing we thought we would gain (which we didn't), Systemless root is to get around Marshmallow security. Root is detected by SafetyNet API, and it detects pretty much any system modification, systemless or not
Currently Using TWRP 3.0.2.0 . Just unlocked bootloader and haven't done anything else . Recovery flash went well during the initial process of unlocking . Now Im trying to make a backup of the stock Rom , everytime I try to make one I keep getting failed at the end of the process ? Is this a known bug ? I have been doing google searches for the past hour and still unable to find anything to indicate anyone else is having this problem . Unless I didn't use the correct terms while searching . Any help would be appreciated
SouthernEvo said:
Currently Using TWRP 3.0.2.0 . Just unlocked bootloader and haven't done anything else . Recovery flash went well during the initial process of unlocking . Now Im trying to make a backup of the stock Rom , everytime I try to make one I keep getting failed at the end of the process ? Is this a known bug ? I have been doing google searches for the past hour and still unable to find anything to indicate anyone else is having this problem . Unless I didn't use the correct terms while searching . Any help would be appreciated
Click to expand...
Click to collapse
It is not a known issue... Where are you storing the backup, internal storage or SD card?
acejavelin said:
It is not a known issue... Where are you storing the backup, internal storage or SD card?
Click to expand...
Click to collapse
Was backing up to the SD Card . Been messing with it and now its working for some weird reason . I appreciate your quick response though
I used windroid to unlock the bootloader and install twrp( don't reboot system but rather boot into recovery to make twrp stick) , from there I just flashed supersu and I was good to go. Many methods out there but this worked for me.
Thank you so much for this guide. I have to say, as a new Motorola user coming from Samsung phones exclusively, this whole process made me feel like a real noob again.
I made the switch from iOS to Android back when the Galaxy S2 came out because I grew tired of the jailbreak cat and mouse games on the iPhones and iPads. Learning to root and flash ROMs on all my subsequent Samsung devices was fairly simple and very enjoyable. This Moto X Pure though was a real tasker for me. I honestly never knew about the extra steps you had to take to unlock, twrp and root this phone. I really wish manufactures would help us make this much easier.
Anyway, thank you again for your help. I'll be seeing y'all around the forums as a new MXPE user!
acejavelin said:
No, although that was one thing we thought we would gain (which we didn't), Systemless root is to get around Marshmallow security. Root is detected by SafetyNet API, and it detects pretty much any system modification, systemless or not
Click to expand...
Click to collapse
Thank you for clarifying a misconception I had on systemless root
(I intentioned to reply to you earlier, but the mad busy week made me forget about my intent )
I'm going to try right now the latest stable with systemless method (rather than flashing the older version) on a full wiped clean stock to see if it works. (Even tho I see lots of feedbacks here inspiring me to believe it would)
In what order?
acejavelin said:
It seems no matter how much this topic gets discussed, people still use old methods and they either fail, or they break something like WiFi, Mobile Data, infinite bootloop, or getting stuck on the boot logo... THIS DOESN'T HAVE TO HAPPEN and it IS repairable, usually without reflashing the entire image. The problem comes from using an old method, outdated SuperSU, or incorrect method. This guide will help you correct most issues, or help you to flash root correctly the FIRST time.
I have written rooting guides for multiple Moto device, and I have owned many Moto devices as well, so I have some idea what I am saying and I have tested these methods extensively, they work.
------------------------
This guide covers ALL Moto X 2015 models that can be bootloader unlocked and have TWRP available, it doesn't matter if it is the XT1575 or XT1572, the method is identical (untested on Chinese XT1570, but it should work). In fact, this method will work on all 2015 and 2016 series Moto phones running Marshmallow, including the Moto E, X, G3, G4, and Z with the appropriate TWRP image.
Please read completely and make sure you understand each step and how to do it, if you don't get something search the thread or ask an open question, no offense, but do not PM me with a question because you think it is too stupid to ask in public (we all started as noobs), or because you want me to hold your hand and do it for you, I will politely tell you no and ask you to post in the thread.
If you are coming here because you followed an old guide where you used a special boot.img file and now you have no service (WiFi and/or mobile data) and you don't have a TWRP backup to restore first, well, the RIGHT way to fix it is to reflash the current stock firmware image and start over... why? Because the various "help" people give to have you flash the radio files that match the kernel (ie. boot image) that was patched for the old style root method, has now put you in a mismatched firmware environment and could potentially brick on the next OTA. If you are in this situation and don't know for to properly fix it... go to the FAQ section in post #3 below (WIP-incomplete).
If came are coming here to root the first time, or you just thought you could flash SuperSU and reboot and now stuck in either a bootloop or stuck on the boot logo... Your in luck, read on, because we can fix that in a jiffy!
tl;dr version for advanced users: Skip to "How to do it" section
I am writing this tutorial because there are still lots of failed root attempts using older "standard" methods that do not work on this device. I also do not like the "one click" root methods, because they can and do fail (KingoRoot will brick a Moto X P/S, regardless of what it's web page says), and when they do people have no idea how to fix it. The manual way is not difficult, and it teaches you how to work on, fix, and use your device on a level above that of the average smartphone user.
I will only cover the details of rooting, the prerequisites are covered elsewhere in detail and I will link to reliable sources for the information. Specifics of the prerequisites are outside of the scope of this tutorial, but are open for discussion in this thread.
Prerequisites:
1) Device must have an unlocked bootloader. See Moto - Unlocking the Bootloader for more info.
NOTE: Performing this prerequisite will give you all the tools (fastboot) and drivers needed to continue, and wipe your device, meaning erase all your information and programs. Make sure to backup any important data first. This step will also permanently void your warranty once an unlock code has been issued by Moto, it doesn't matter if you even use it, your warranty is done.
2) You need to have TWRP installed or one-time booted via fastboot. CWM and other recoveries will NOT work at this time. See the official TWRP pages for clark here. I will NOT teach you how to use TWRP in this thread, if you are going to root you need to understand that your self, but if you get in a real bind I may knudge you in the right direction. I will tell you that there are two modes, flashed or booted, the later is much better if you plan to take an OTA later as long as you don't do something stupid like flash Xposed.
3) You need a copy of the latest STABLE SuperSU ZIP from Chainfire's site on the internal storage or SD card of your device, you can always fine the latest stable version here: https://download.chainfire.eu/supersu/ As of this posting SR4-SuperSU-v2.78-SR4-20161115184928.zip is the current stable version and it has been tested and verified to work.
NOTE: Unless otherwise stated, do not use a beta version for rooting Moto devices. SuperSU versions with even numbers are stable versions, while odd numbered versions are beta editions.
4) Reboot and start TWRP recovery, the method you use to do this doesn't matter (boot or flash).
5) Backup your device with TWRP to your SD card, even if you just unlocked and the phone is as blank as a printed page from a 1988 HP DeskJet printer with it's original cartridges still installed, backup... You will always have a good point to return to if the worst happens.
How to do it:
Now, the procedure is the same whether you are trying to root the first time, or you did it the old way just flashing SuperSU and are now not able to boot...
In TWRP, go to Advanced and open the Terminal, in the terminal type this EXACTLY as shown:
Code:
echo SYSTEMLESS=true>>/data/.supersu
Now press enter (there is no confirmation returned), then exit and press the Home key. You can verify this worked correctly by entering 'cat /data/.supersu' and see if it returns "SYSTEMLESS=true", if not, you did it wrong, try the echo command again.
Go to Install and select the SuperSU zip file you downloaded from Prerequisite #3 and swipe to flash it and reboot. No need to clear caches or anything else but you are welcome to if you wish. You can install SuperSU updates normally through the app going forward (as of this posting).
Why do I have to do this???
For whatever reason, the install script for SuperSU does not recognize that this device (like many others) requires a systemless root installation. By creating /data/.supersu in the TWRP recovery environment, the SuperSU install script parses the file and sees "SYSTEMLESS=true" and ignores what it auto-detects and forces a systemless root installation.
Hope this is helpful to someone!
As always, if this is the first time you have booted TWRP or attempted root... BACKUP IN TWRP FIRST!!! Once the system is modified, it cannot be undone (easily) and you will always have a known good starting place if the worst happens.
DISCLAIMER: I am not responsible for anything that happens... Your device, your responsibility, no matter what happens... Although all the information here has been tested and is known to work with no issues except where noted, things occasionally can and do go wrong and we cannot foresee every possible scenario or circumstance.
If you need assistance, we need detailed information about what what's going on and what you have tried to do... Please provide details including:
1) Device model number and Android version
2) TWRP version
3) SuperSU version
4) Output of 'cat /data/.supersu' from TWRP terminal
And a copy of recovery.log if possible, and any other pertinent information you can think of. Without specific information there is nothing that I can do to assist you and request for help may be ignored.
EDIT: Photos added showing what a proper command and flash should look like. Note that in picture 1 the exit command is not needed, you can just back out. In pictures 2 and 3 a proper flash of SuperSU is shown, note that system-less mode is specified and the boot image is patched, this is what should occur. It is normal for it to loop once or twice, but that is it, first boot could take 10 minutes plus.
Click to expand...
Click to collapse
I really appreciate the help, but I have one question. Do I flash SuperSu and then type the command into the terminal, or do I type the terminal command first?
Thanks again for your help,
Matt
Iglooian said:
I really appreciate the help, but I have one question. Do I flash SuperSu and then type the command into the terminal, or do I type the terminal command first?
Thanks again for your help,
Matt
Click to expand...
Click to collapse
First, a little etiquette lesson, please don't quote long posts (especially the first post) for no reason, at the very least edit it down to only show the relevant parts so people don't have to scroll through a long meaningless quote.
And to answer your question, you enter the terminal command first, then install SuperSU, that is how it is ordered in the first post instructions. If you read the entire first post, it explains what the command does, and logic therefore lets you know it must be done first.
acejavelin said:
First, a little etiquette lesson, please don't quote long posts (especially the first post) for no reason, at the very least edit it down to only show the relevant parts so people don't have to scroll through a long meaningless quote.
And to answer your question, you enter the terminal command first, then install SuperSU, that is how it is ordered in the first post instructions. If you read the entire first post, it explains what the command does, and logic therefore lets you know it must be done first.
Click to expand...
Click to collapse
Actually, it was unclear what order I was supposed to do it in; we call that a clarifying question, but thanks anyway.
Iglooian said:
Actually, it was unclear what order I was supposed to do it in; we call that a clarifying question, but thanks anyway.
Click to expand...
Click to collapse
Fair enough... I will edit the "How to do it" section to make it more clear.
Just in Time for The New Year I would like to show Everyone How to root there Canadian variant LG V20!
Current Known issues
- No Service From Carrier
- Seems VERY Laggy (Can be Fixed with using a Kernel)
Other Information
- Yes you can Restore to factory Settings with this Method (So Don't worry if you screw up)
- Sorry far I Only know This works on the H915 however the Restore should work with all LG Models
- This will give you a Bootloader to have access to fastboot Commands
- Working TWRP Recovery
So After Reading the No Service Part many are mostly not going to be interested... I uploaded this Thread anyway to see if anyone could find a fix to this issue. (When one is found I will update this with the fix)
So If you still want to Root your Canadian LG V20 Let's do it!
DOWNLOAD THE ZIP FILE HERE
https://mega.nz/#!ABZV0AZZ!8LBGgpjiGT1ij6scshWTQO4tGhUb9GMUcTHtKLLhfW0
- I DO NOT TAKE ANY RESPONSIBILITY FOR YOU BREAKING YOUR DEVICE
- I HAVE NOT CREATED ANY OF THESE FILES I ONLY PUT EVERYTHING INTO ZIP FOLDER FOR YOU TO DOWNLOAD AND MAKE THINGS CONVENIENT AND SIMPLE
- PLEASE THANK THE ACTUAL DEVELOPERS WHO CREATED THESE FILES (LISTED BELOW)
FILES USED/THANK THESE PEOPLE
@me2151 Dirty Santa Files (Boot2.img, Step 1.bat, Step 2.bat and RUNMEFIRST.bat) -
HTML:
https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
@jcadduono recowvery and dirtycow exploit (used with Dirty Santa)
HTML:
https://forum.xda-developers.com/v20/development/h918-recowvery-unlock-v20-root-shell-t3490594
Stock Images for LG V20 H915 you can find those here
HTML:
http://lg-firmwares.com/lg-h915-firmwares/
(You will need to be flashed on H91510d for this to work however you could try 10e if you wanted)
@autoprime UPPERCUT for LGUP (This is what allows the LG V20 to be read and will allow you to downgrade to 10d if needed and will let you restore to stock using Download Mode at any time! This will only be used for you if you mess up with the root and need to flash back to stock or you need to upgrade or downgrade to the 10d firmware)
HTML:
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
@Chainfire SuperSu v2.79 SR1
HTML:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
WHAT DO YOU NEED BEFORE YOU START
- A Copy of LGUP
- An LG V20 H915 Running the 10d Firmware (if you need help flashing this firmware read below before Step 1)
- The Zip File I Listed above to Download
- ADB and LG Drivers
- A Windows Computer
HOW TO UPGRADE/DOWNGRADE TO FIRMWARE VERSION 10d
Step 1 - Boot Your Device into Download Mode (Turn the phone off hold the Vol + Button and plug in your device to the Computer)
Step 2 - On your Computer find the Zip File (extract it) and Open Uppercut.exe (This should launch LGUP and Make sure your Phone is Connected to your Computer)
Step 3 - In LGUP Select the Upgrade button (even if you are downgrading it will still work) then find the Firmware .kdz file for 10d
Step 4 - Flash the KDZ back onto your device
ROOTING THE DEVICE!
Step 1 - Install a Terminal Emulator App to your Device
Step 2 - Verify your device is plugged in and that ADB sees the Device (adb devices)
Step 3 - On your Computer Open the RUNMEFIRST.bat (do not close this window)
Step 4 - After loading up RUNMEFIRST.bat run Step1.bat (if you see permission denied on the files Flatland and Flatland64 this is normal)
Step 5 - Once the shell prompt opens in the step 1.bat window type "run-as con" (without quotations then hit enter) then type "chmod 0777 /storage/emulated/0/*" (yet again not in quotations and then hit enter)
Step 6 - Once that has finished on your phone open the Terminal app you downloaded earlier and type in id (if untrusted_app is displayed continue if not redo the steps)
Step 7 - In the Terminal Emulator type applypatch /system/bin/atd /storage/emulated/0/dirtysanta then watch the RUNMEFIRST.bat to see when it tells u to open Step2.bat (when it tells u to open Step2.bat open it)
Step 8 - You should now Be into a Somewhat usable bootloader on your device... now we Stop using DirySanta and Start to do things manually by ourselves open up a Command Prompt and type "fastboot flash boot boot.img" this will flash the boot2.img used in the Dirty Santa Exploit
Step 9 - After that finishes type "fastboot flash recovery TWRP.img" This will put TWRP (For the H918 Variant) on your device
Step 10 - Boot into TWRP (Remove battery then put it back in hold the Vol - Button and the Power Button Once LG Powered by Android Logo Appears Release the Power Button then Hold it Again, A White screen should come up say yes to both screens then should boot into TWRP)
Step 11 - Now that you are this far I recommend you backup everything so that you can start from this point if you mess up any upcoming steps that way you do not have to reflash the stock image and start from step 1 again....
Step 12 - Select Wipe from the Main menu then go to Format Data then type yes and enter (This will remove the password lock currently enabled on the device)
Step 13 - On the Main Menu select Install browse to your SD Card where you put your SuperSU.zip File onto and flash that to the device
Step 14 - Once that is completed return to the main menu select the Wipe menu again go to Format Data then yes again
Step 15 - Go back to the Wipe Menu and go to Advanced and select Dalvik, Data and Cache then slide to wipe after this finishes reboot to the system
Step 16 - Once in the System complete the Android setup and enable USB Debugging again then type adb reboot recovery (if your device does not boot into Android this is when u go back into TWRP by doing the remove battery method and holding those buttons down as I stated before and you Restore your Backup you made in Step 11 and you try doing those Steps again)
Step 17 - Once Back into TWRP (you may make another backup here if you would like) select Install then Flash SuperSU to your device again... Go back to the Main Menu Select Wipe then Advanced and Select Dalvik and Cache then Slide to Wipe and reboot into the System
Step 18 - Once back into Android you should see SuperSU on your device and you may download a Root Checker app of the Play Store to Make sure your Device is Fully Rooted and Working!
Please inform any Issues in the Replies below and I will add them to the List for People to Know before they Attempt rooting... If anyone finds a Fix for the Modem file to get service working on the LG V20 H915 while rooted please reply and i will Add that to the guide BELOW!
I DID NOT MAKE ANY OF THESE FILES SO PLEASE THANK THE CREATORS (LISTED ABOVE) FOR THEIR HARD WORK AND EFFORTS!
I THINK I BRICKED MY DEVICE/ THE ROOT DID NOT WORK/ I WANT TO GO BACK TO STOCK
Step 1 - As Stated Above to this all we need to do is Enter Download Mode (Remove Battery reinsert battery hold Vol + and plug in the Device) and then run the UPPERCUT.exe File
Step 2 - Select Upgrade browse over to your kdz file and select it then flash it to your device! Your Device Should boot up into Android (I Have Bricked my LG V20 Many Times Removing TWRP and the Bootloader and having nothing but the LG Logo and the Download Mode and I could Still get into the Device after doing this so it should work for you! However any problems should be dealt with the developer on his forum listed here
HTML:
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
)
Anyone willing to Try installing things like Kernels and ROMs I would assume you would be using H918 Supported Files For those as thats what TWRP is running in.....
Will be adding a Zip File will all the Files need in a Couple of Minutes....
There seems to be a hidden settings menu on our Devices in which we can play around with the Modem Settings among other things.... you need to open the Phone App and Type in *#546368#*915# and the menu should come up.... Maybe somebody can figure out how to get Service running.... All Credit for this goes to @KedarWolf in his post listed here https://forum.xda-developers.com/v20/how-to/access-hidden-menu-h915-t3515098
Nice little write up. Did you try this on the wind/freedom 915 or videotron 915? My guess would be that you tried it on the wind 915 and if so i bet it has something to do with their slightly differnet bands they use albeit for a change an unlocked wind device works fine on other networks. But i really have no clue if there's a connection on why there's no signal. This kind of thing is beyond my pay grade. I would be guessing someone like @autoprime would be someone to ask but chances are he has other things to worry about and likely doesn't have the device.
But keep plugging away. You may figure it out yet
markbencze said:
Nice little write up. Did you try this on the wind/freedom 915 or videotron 915? My guess would be that you tried it on the wind 915 and if so i bet it has something to do with their slightly differnet bands they use albeit for a change an unlocked wind device works fine on other networks. But i really have no clue if there's a connection on why there's no signal. This kind of thing is beyond my pay grade. I would be guessing someone like @autoprime would be someone to ask but chances are he has other things to worry about and likely doesn't have the device.
But keep plugging away. You may figure it out yet
Click to expand...
Click to collapse
Yes the Wind H915 still haven't got it figured out yet hopefully someone will soon then we will have an official working root for the Canadian Variant
I would have jumped on the Freedom Mobile (formerly Wind) deal ($30 for 6GB for the first 10 months) if the H915 had been root and has an unlocked bootloader. LG's track record of offering unlocked bootloader is looking very bleak for the H915.
@TheDantee I am sure the service issue will be resolved soon but "Seems VERY Laggy" part is worrying me more. What is the reason for that? I like the possibility to go to the default LG rom like nothing happen.
Emilius said:
@TheDantee I am sure the service issue will be resolved soon but "Seems VERY Laggy" part is worrying me more. What is the reason for that? I like the possibility to go to the default LG rom like nothing happen.
Click to expand...
Click to collapse
Sorry i should mention that a Kernel fixed this issue for me!
TheDantee said:
Sorry i should mention that a Kernel fixed this issue for me!
Click to expand...
Click to collapse
Service issue or laggy part?
Emilius said:
Service issue or laggy part?
Click to expand...
Click to collapse
Laggy Part
Noob question, is the phone fully functional after step 10 (TWRP).
The reason I ask is because I really only need to get to TWRP as I want to enable google assistant.
At this point, the root is not a big concern for me.
Thanks,
SHABBA JOTS said:
Noob question, is the phone fully functional after step 10 (TWRP).
The reason I ask is because I really only need to get to TWRP as I want to enable google assistant.
At this point, the root is not a big concern for me.
Thanks,
Click to expand...
Click to collapse
Shoulbe be but you will need to still do a format on the device or you will get locked out and it will ask for a passcode....
TheDantee said:
Shoulbe be but you will need to still do a format on the device or you will get locked out and it will ask for a passcode....
Click to expand...
Click to collapse
So SuperSU messed the service reception? Not bootloader?
Emilius said:
So SuperSU messed the service reception? Not bootloader?
Click to expand...
Click to collapse
I don't think its SuperSU Causing the problem... In the bootloader (debug) that is provided in the DirtySanta root it states the device as an unlocked US996 LG V20 I feel that this is because it has no idea which provider its with since we are Canadian.. I have tried flashing many many modem files from many different firmwares I either get modem blue screens on boot (Goes away permanently if you remove sim card) or I get no Service in the System it self... so personally I think it is the Bootloader since its a debug bootloader because the Canadian Variant does not seem to have a bootloader.... May I ask what is your reasoning for SuperSU being the issue?
TheDantee said:
I don't think its SuperSU Causing the problem... In the bootloader (debug) that is provided in the DirtySanta root it states the device as an unlocked US996 LG V20 I feel that this is because it has no idea which provider its with since we are Canadian.. I have tried flashing many many modem files from many different firmwares I either get modem blue screens on boot (Goes away permanently if you remove sim card) or I get no Service in the System it self... so personally I think it is the Bootloader since its a debug bootloader because the Canadian Variant does not seem to have a bootloader.... May I ask what is your reasoning for SuperSU being the issue?
Click to expand...
Click to collapse
Based on your answer to SHABBA JOTS I get feeling that maybe is SuperSU creating that problem if until step 10 (TWRP) is all good. So soon we do step 8 (flashing boot image) service is gone. Is that right?
Emilius said:
Based on your answer to SHABBA JOTS I get feeling that maybe is SuperSU creating that problem if until step 10 (TWRP) is all good. So soon we do step 8 (flashing boot image) service is gone. Is that right?
Click to expand...
Click to collapse
Currently I have no access to my V20 so i can not try and tell you but if you are willing to reset and try the steps again up to Step 8 then lemme know the answer... however the system is very very very unstable many crashes tons of lag massive downgrade in battery without that boot.img... what if u flash twrp once in the bootloader but not the boot.img try that.... then get back to me Curious now lol
TheDantee said:
Currently I have no access to my V20 so i can not try and tell you but if you are willing to reset and try the steps again up to Step 8 then lemme know the answer... however the system is very very very unstable many crashes tons of lag massive downgrade in battery without that boot.img... what if u flash twrp once in the bootloader but not the boot.img try that.... then get back to me Curious now lol
Click to expand...
Click to collapse
He he, I am an Nexus person. I am so afraid to mess up my V20. With Nexus it is so easy, in 2 steps you are done. I miss that part I mast say.
Ok so i gave this a quick read and from what i gather you flash the bootloader before you flash twrp and super su. So here's a question that may or may not have been tried. Is there any reason you can't follow this method to root and then flash stock recovery and then flash stock bootloader?
Since it seems bootloader is the issue with having no data or signal. You would at least have root but just not twrp. Does that make sense?
markbencze said:
Ok so i gave this a quick read and from what i gather you flash the bootloader before you flash twrp and super su. So here's a question that may or may not have been tried. Is there any reason you can't follow this method to root and then flash stock recovery and then flash stock bootloader?
Since it seems bootloader is the issue with having no data or signal. You would at least have root but just not twrp. Does that make sense?
Click to expand...
Click to collapse
It's look like H915 dues not have bootloader at all.
Emilius said:
It's look like H915 dues not have bootloader at all.
Click to expand...
Click to collapse
Well it has to have a bootloader. It's just locked right. Like if we pulled apart the stock kdz we should be able to find it and my theory is we could use flashfire to flash stock recovery and also flash thr bootloader since twrp can't to my knowledge flash bootloaders. We would be left with root but no recovery. I could be so far from being right but who knows. This could be the only way to have root and a working phone.
So is it really so that the Xperia XZ does not have a recovery/bootloader menu?
I have unlocked the bootloader which needed the fastboot which works but now that I want to root the device and need TWRP I am getting nowhere since I can not get the device to go into recovery mode. this is annoying me badly, my phone is basically useless until I am done with this.
Any advice?
kane_1371 said:
So is it really so that the Xperia XZ does not have a recovery/bootloader menu?
I have unlocked the bootloader which needed the fastboot which works but now that I want to root the device and need TWRP I am getting nowhere since I can not get the device to go into recovery mode. this is annoying me badly, my phone is basically useless until I am done with this.
Any advice?
Click to expand...
Click to collapse
During the initial unlocking of the device of course it doesn't carry any recovery. Maybe ought to try powering down your device and press and hold the volume up key while connecting your device to the computer until the blue led is lit that's fastboot mode. Do this fastboot flash recovery recovery name.img then try accessing recovery after that. You now should have a working recovery.
---------- Post added at 06:09 AM ---------- Previous post was at 06:06 AM ----------
You can find the available recovery.img on androplus website https://kernel.andro.plus/tone2.html for your corresponding firmware and androplus kernel fastboot flash boot boot.img.
---------- Post added at 06:10 AM ---------- Previous post was at 06:09 AM ----------
The available instructions are posted on the website. Please make sure you have the perquisites.
Thanks.
Would you recommend running a custom rom or sticking to stock android and run xposed?
also, the first step it say boot into recovery bootloader, I don't understand how i am supposed to do that when there is none in the beginning.
I have tried everything any guide says and it just doesn't seem to work.
The adb says waiting for device as if the device is not there, the one click tool just doesn't do anything.
Idk anymore
kane_1371 said:
I have tried everything any guide says and it just doesn't seem to work.
The adb says waiting for device as if the device is not there, the one click tool just doesn't do anything.
Idk anymore
Click to expand...
Click to collapse
background (look at the date - some content is for Z3 xperias and older that do not have DM-Verity):
https://forum.xda-developers.com/crossdevice-dev/sony/noob-guide-to-sony-ericsson-xperia-t3209012
For the newer phones follow the instructions you find in the device-fora.
Here (after a full wipe) you get started following the instructions written by AndroPlus.
You need the right ROM and TWRP (recovery) for your ROM-version. Look at the changelog.
e.g.: I am on 39.2.A.0.374. There is no kernel for that right now -> I can not get into recovery -> no root for me ATM
fastboot boot TWRP_xy boots the recovery
You will become a "developer" on your device once you tapped seven times on the build number -> then you switch on adb debugging in the developer options
"When you unlock your bootloader you will lose all the DRM features on your device, this makes it valuable to have a backup of the unmodified version stowed away somewhere safe. You will need root level access to create that backup before unlocking. There is a tool called Backup TA which is widely used to create and restore backups of the TA partition. TWRP in XZDualRecovery can do the same. "
What the heck?
I need to backup TA, ok, but I need to have root to do this? ok, but to have root access I need to unlock my bootloader and flash a root boot which messes up with the TA?
It seems like every single one of these posts that I read just make things more confusing.
Why can't there just be a simple step by step that tells you what to do?
NVM, I actually flashed a recovery into the phone by using a combination of one click tool and Quickimage.
God this community need better tutorials and step by steps
Anyway now it is asking me for a password which is a surprise to me
OK past that too, did a backup and no I see that I have nothing but the recovery to boot to, hmmmm still figuring this thing out
It is amazing to imagine how **** is constantly hitting the fan.
The quick image thread has very little explanation and two screen shots which show that they are flashing the image to boot.
So I did exactly that and now I have no Boot but a recovery instead hhahahahahaha.
I am fairly depressed and desperate at this point
Well I somehow managed to install Xplayztation.
As mentioned before the only way possible for me to get a recovery installed was through flashing it on boot and loosing my access to the android at first and then installing a new rom through Twrp.
I have no idea what will the outcome for this be.
Any suggestions?
kane_1371 said:
God this community need better tutorials and step by steps
Click to expand...
Click to collapse
Go ahead!
You will find everything HERE and on
https://forum.xda-developers.com/crossdevice-dev/sony
There is more than plenty on the Z5 and Z3+ foro too...
In the Z5 forum you can really get to the technical beef if you want. The tutorial I quoted is gentle but written at a time when it was easier to root the devices.
The TA-Backup works via a vulnerability that raises the rights temporarily. This is not rooting per se since this does not survive a reboot.
Why can't there just be a simple step by step that tells you what to do?
Click to expand...
Click to collapse
Here on this forum (after a full wipe) you get started following the instructions written by AndroPlus.
or:
https://forum.xda-developers.com/showpost.php?p=70370065&postcount=7
DHGE said:
Go ahead!
You will find everything HERE and on
https://forum.xda-developers.com/crossdevice-dev/sony
There is more than plenty on the Z5 and Z3+ foro too...
In the Z5 forum you can really get to the technical beef if you want. The tutorial I quoted is gentle but written at a time when it was easier to root the devices.
The TA-Backup works via a vulnerability that raises the rights temporarily. This is not rooting per se since this does not survive a reboot.
Here on this forum (after a full wipe) you get started following the instructions written by AndroPlus.
or:
https://forum.xda-developers.com/showpost.php?p=70370065&postcount=7
Click to expand...
Click to collapse
Thanks for the links man.
Well I somehow managed to install Xplayztation.
As mentioned before the only way possible for me to get a recovery installed was through flashing it on boot and loosing my access to the android at first and then installing a new rom through Twrp.
I have no idea what will the outcome for this be.
Any suggestions?
Also I had already unlocked my bootloader when I learned about TA backup.
And then was confused that I am supposed to Root for it to work, so what are my options now?
Are the DRM keys reverseable through flashing my regions latest firmware via the flashtool?
kane_1371 said:
Thanks for the links man.
Also I had already unlocked my bootloader when I learned about TA backup.
Click to expand...
Click to collapse
You are welcome
Your TA-keys are gone. NO WAY to revover them. Do not even try - you will hardbrick your phone.
Follow the links I gave.
OK
Well I have the insurance on it, so if anything ever happens that is not reversible I will bust the phone and get a new one lol.
For now I will enjoy the stuff
It was a lot of trouble but I got what I wanted (moded Spotify app haha )
I want to root my xz too. Did you root it. If you did, how.? Plz reply
Im just gonna ask confirmation New to sony scene and never knew i had to backup the TA partion (Shouldve came here first normally would) but i assume theres no way to recovery DRM keys (i did install Androplus Kernel)
Well yes I did manage to do the work but I imagine the XZ is built in a manner that you can not root it without burning all the bridges behind you however I am basically the only person in this forum that I found to either have rooted their XZ or had to go through these many hassles.
As you can read in earlier posts I did have to backup the TA but by the time I knew about that I had already deleted the TA. The extended permission didn't work for me either so Idk if it was me doing something wrong or Sony going hard against rooters.
Also no TA is not reversible so once you do root and if you don't have the TA backed up don't even go for reinstalling the original rom because it will not work period.
I had to flash my boot and install recovery on that which is not the intended way of using recovery but I couldn't do it any other way, when you do that you basically are left with a paperweight the shape of a phone and then from there I would go to Boot instead of recover since recovery partition was empty and the recovery image was flashed on boot partition and use the recovery to install the rom.
But you should try to follow the step by steps posted in this forum by other people so maybe you won't have to endure the pain I did.
I have to say at this time I really feel like it wasn't even worth it because XZ is a pretty underwhelming phone even though I had a busted Z3 before this I never experienced such a slow phone with that.
XZ is just constantly out of ram and slows down and reboots the rom's shell which is pretty annoying.