Related
Hello, my Photon started acting up really weird. First of all, it was really slow. I thought it's because I had like 150MB left and it was nearly full data-wise. However, I erased most of the data, and left it with 3GB left. Didn't work and it got worse.
I have these stripes around the display (just at sides, not at middle), while phone is turned on. Doesn't matter if in system, or at boot logo. Doesn't matter, because whenever I get to system, I can be in system for like 1 minute, then every application starts crashing (Apex launcher, Google play, whatever you pick) and I basically can't get anywhere. Also if I go to sleep mode, phone is basically dead and it's pure luck when I will turn on phone again. I am trying every few minutes and it's worthless, because any time I get to system anyway, I crash after few seconds.
What to do? I was planing to install custom ROM yesterday, but never got to that, because this all started to act up. So what should I do? Reset system? Any other ideas? Is phone dead?
Sorry for bad english, no bully please.
Thanks in advance
Update - now when I am trying to start up my phone, I have just black screen with white lines in the middle. Then phone shuts down. I will give more info when I will be at home and can get phone on charger
Well definitely try to charge the device up. You might try re-flashing the stock ROM using RSD Lite... Although from your description I fear your issue may be hardware related.
Could turn device on. Apparently that black screen with white lines was just discharged phone. When I put it on charger, I could again boot into system and it was working until I pressed power button to go to sleep mode and phone is again dead. Will try to flash RSD Lite later today and will post what happened
kanek06 said:
Could turn device on. Apparently that black screen with white lines was just discharged phone. When I put it on charger, I could again boot into system and it was working until I pressed power button to go to sleep mode and phone is again dead. Will try to flash RSD Lite later today and will post what happened
Click to expand...
Click to collapse
Charge the device as much as you possibly can before doing anything with RSD. Ideally you should have at least 50% battery in the device when flashing anything.
This is really miserable. I can't really get into bootloader. Because phone after that 'crash' or whatever you want to call it is dead and I can't even see if it's turned on or not. Basically I am randomly waiting when it's gonna restart and then I just get into system. Even if I fully discharge it, it will have black screen with white lines first, it flashes quite couple times and then it will finally boot into system. Also I remember it was ***** in past to get into recovery. Can I do anything from system? Because as soon as I don't turn off my screen by power button, phone is working, though it has those lines on side of LCD (I will try to borrow camera from someone and post it here today).
I set automatic turning screen off for 10 minutes and I am really careful about pressing power button. Sucks there is only option for just 10 minutes, so I have to tap on screen at least for once every 10 minutes or I will not have working phone. **** my life, really.
kanek06 said:
This is really miserable. I can't really get into bootloader. Because phone after that 'crash' or whatever you want to call it is dead and I can't even see if it's turned on or not. Basically I am randomly waiting when it's gonna restart and then I just get into system. Even if I fully discharge it, it will have black screen with white lines first, it flashes quite couple times and then it will finally boot into system. Also I remember it was ***** in past to get into recovery. Can I do anything from system? Because as soon as I don't turn off my screen by power button, phone is working, though it has those lines on side of LCD (I will try to borrow camera from someone and post it here today).
I set automatic turning screen off for 10 minutes and I am really careful about pressing power button. Sucks there is only option for just 10 minutes, so I have to tap on screen at least for once every 10 minutes or I will not have working phone. **** my life, really.
Click to expand...
Click to collapse
Why can't you turn the phone off and charge it while off, or boot to recovery and charge the phone in recovery?
arrrghhh said:
Why can't you turn the phone off and charge it while off, or boot to recovery and charge the phone in recovery?
Click to expand...
Click to collapse
About charging it while turned off - Can't because when I try to turn it on again, it's roulette when I get finally bootloader logo and not black screen with white stripes.
And boot to recovery. Is it possible to like download some command prompt application and boot to bootloader from there? I know when I had my G1 (and when I actually understood android ) you could boot to recovery or bootloader via console. I have astro installed on phone, so downloading some console application and installing it shouldn't be problem.
Btw as we are speaking, I tried to call someone and I basically get same thing like when I am going to sleep mode, I get black screen and now I am just waiting, when phone will eventually want to restart itself.
kanek06 said:
About charging it while turned off - Can't because when I try to turn it on again, it's roulette when I get finally bootloader logo and not black screen with white stripes.
And boot to recovery. Is it possible to like download some command prompt application and boot to bootloader from there? I know when I had my G1 (and when I actually understood android ) you could boot to recovery or bootloader via console. I have astro installed on phone, so downloading some console application and installing it shouldn't be problem.
Btw as we are speaking, I tried to call someone and I basically get same thing like when I am going to sleep mode, I get black screen and now I am just waiting, when phone will eventually want to restart itself.
Click to expand...
Click to collapse
Still sounds like some sort of a hardware issue, is the phone new to you?
You can certainly force bootloader mode, in several ways. When it's off you can hold power + camera and it will give you a choice of what to boot. When it's in Android you can do "adb reboot recovery" or "adb reboot bootloader" depending on where you want to end up. There are various apps which can also do this for you, if you are on the stock ROM but rooted.
arrrghhh said:
Still sounds like some sort of a hardware issue, is the phone new to you?
You can certainly force bootloader mode, in several ways. When it's off you can hold power + camera and it will give you a choice of what to boot. When it's in Android you can do "adb reboot recovery" or "adb reboot bootloader" depending on where you want to end up. There are various apps which can also do this for you, if you are on the stock ROM but rooted.
Click to expand...
Click to collapse
Phone is not new. I bought it used about one year ago.
I am not entirely new to android, but I didn't have android phone for 2 years and then I got this one. So I am really pretty **** with android atm
I will try reboot to bootloader from some console application.
I am rooted, opened bootloader, stock rom
Finally got into recovery, what now?
Also, when I once booted to system, I downloaded some root checking app, and root apparently isn't here. Well cornholio told me it is rooted back when I gave him my phone to perform sim card mod, but whatever. However, I am in recovery, but device is not detected by RSD Lite.
kanek06 said:
Finally got into recovery, what now?
Also, when I once booted to system, I downloaded some root checking app, and root apparently isn't here. Well cornholio told me it is rooted back when I gave him my phone to perform sim card mod, but whatever. However, I am in recovery, but device is not detected by RSD Lite.
Click to expand...
Click to collapse
Well reading back thru this thread, I was suggesting RSD Lite back to stock. I'm not really sure what you want to achieve tho, what your "final" goal is here.
I'm not even sure what kind of recovery you are booted into - stock recovery? CWM?
Either way, if you want to RSD the phone back to stock, you need to boot into fastboot/bootloader mode - not recovery. Just make sure the phone is charged up as much as possible before flashing in RSD.
Oh, sorry - misunderstanding from my side, thought I can switch to fastboot from recovery, oh well.
Also yeah, stock recovery.
To spread more facts - in case somebody would have similiar problems, when I try to just turn phone on, I have zero success what so ever. There's just this blank black page flashing every few seconds. However, when I remove back cover, I somehow force phone to load to bootloader logo, then I finally get chance to force phone to get to recovery. I will try to get to fastboot
kanek06 said:
Oh, sorry - misunderstanding from my side, thought I can switch to fastboot from recovery, oh well.
Also yeah, stock recovery.
To spread more facts - in case somebody would have similiar problems, when I try to just turn phone on, I have zero success what so ever. There's just this blank black page flashing every few seconds. However, when I remove back cover, I somehow force phone to load to bootloader logo, then I finally get chance to force phone to get to recovery. I will try to get to fastboot
Click to expand...
Click to collapse
Not sure if stock recovery has adb enabled, but if you have adb you can 'adb reboot bootloader'.
Otherwise do the power+cam trick I mentioned earlier.
http://i.imgur.com/3XYLngJ.png
kanek06 said:
http://i.imgur.com/3XYLngJ.png
Click to expand...
Click to collapse
Did you remove the getvar lines from the xml file...?
Yes
Weird. I only recall seeing that when people were trying to downgrade... but you are flashing 4.1.2.
The phone is in fastboot mode? What happens when you click "show device"? The "Device Properties" section is eerily empty.
I know it sounds shady, when I am coming back here again in few weeks, just been a bit busy lately, sorry about that.
However, somehow I got phone to flash it. The white graphical lines on sides dissapeared, however I got some new bug - I can't use phone in portrait mode, just in landscape - aka I need to swipe keyboard to have phone working. Also, that thing when phone completely stops working now occurs only when I am in that portrait mode, but I can restart phone this time.
When I finished this, it was midnight so I went to bad, so I tried to set up alarm, if it's gonna randomly shutdown like before and unfortunately, yes it did. I was waken up with this classical white line graphical bug black screen and had to reboot the phone. Oh well, managed to boot to system and it takes 5 minutes to fetch sim card (I have sim card mod from cornholio) and as I said, those white lines on side aka mysterious graphical bug is back.
Unfortunately for me, starts looking like real hardware issue now
Hello all,
Today my Verizon S6 (on CleanRom 1.5) started to keep rebooting. After it boots, I can use the phone for less than a minute until it reboots again.
Here's how it began to happen today, if it helps.
- I didn't plug my phone to a charger last night, and when I woke up the phone had like 0%~1% battery. The phone died soon after I picked up the phone.
- At the same time I turned on the phone, I connected it to the stock charger.
- I used it for like 1-2 minutes, and the phone seemed to get confused whether it should die again or not (at 0% battery level)
- Then the phone decided to die again, and keeps rebooting itself.
My guess is something related to booting, initializing, or battery might have gone wrong. Also the soft button lights get never turn on.
Now I cannot use the phone really, as it dies like 30 seconds after I swipe the lockscreen.
- I tried to boot into safe mode, it didn't help.
- I wiped cache partition, it didn't help either.
The last thing I would like to try is to odin CleanRom again (or factory reset) but I would like to try other things first because I cannot even backup the data as it keeps rebooting. Odin will wipe all the data in my phone.
Any help or suggestions guys?
mtshure said:
Hello all,
Today my Verizon S6 (on CleanRom 1.5) started to keep rebooting. After it boots, I can use the phone for less than a minute until it reboots again.
Here's how it began to happen today, if it helps.
- I didn't plug my phone to a charger last night, and when I woke up the phone had like 0%~1% battery. The phone died soon after I picked up the phone.
- At the same time I turned on the phone, I connected it to the stock charger.
- I used it for like 1-2 minutes, and the phone seemed to get confused whether it should die again or not (at 0% battery level)
- Then the phone decided to die again, and keeps rebooting itself.
My guess is something related to booting, initializing, or battery might have gone wrong. Also the soft button lights get never turn on.
Now I cannot use the phone really, as it dies like 30 seconds after I swipe the lockscreen.
- I tried to boot into safe mode, it didn't help.
- I wiped cache partition, it didn't help either.
The last thing I would like to try is to odin CleanRom again (or factory reset) but I would like to try other things first because I cannot even backup the data as it keeps rebooting. Odin will wipe all the data in my phone.
Any help or suggestions guys?
Click to expand...
Click to collapse
The OE2 tar file shouldn't wipe your phone as it is not a full wipe tar. I don't know if your phone would do it with it's reboot problem but a dirty flash of clean rom shouldn't wipe your phone either. However, a reboot during the middle of either of those would not be good. Flashfire does seem to be able to keep a phone from rebooting once it gets going or at least it has for me when I have been caught in a bad way before.
Problem Solved!!!
Thank you Tulsadiver for your suggestions. But is it okay to do odin without wiping anything?
I almost gave up after struggling several hours and thought about doing a factory reset, but the problem is solved now.
I found it weird that the soft key lights never turn on, so I thought that there might have been something wrong with the power management. So I turned the ultra power saving mode on (fortunately the phone didn't reboot before I did that), and it didn't reboot itself. I turned it back off then now the problem is gone!
I am happy with it now, and this might be one of the things to try if you experience a random reboot.
Bought a Nexus 5 about 6 months ago USED. It has been amazing. I got the latest OTA a week ago or so, not sure if that has anything to do with current issues.
About 2 days ago started randomly restarting. Today, it shut down and has been in continuous loop restarting. I see "Google" and maybe even the boot dots loading, then it is off. Three seconds later, starts again and repeats. Never makes it all the way into Android system. I let it sit for a while and when I pick it up, without touching any buttons, it repeats all of this. I suppose it is probably dead in general, but I don't know. Do you guys have any ideas? Again, I bought it used and from a ma/pap store who said they buy 100 in bulk, which made me skeptical, but they also had a 60 day guarantee and it was amazing the first 60 days and even after. It has been error free for 6 months, so I don't know if this is just a random issue or if the previous owner dropped it in a lake and I got lucky, or what. FWIW the damn thing has been in a case and never dropped, so it isn't anything that I have done I don't think. Thanks for any help.
edit: never rooted, never messed with, always been stock
Another user reported some instability since the last OTA update.
Flashing the full factory images did the trick.
a friend of mine gave me his nexus 5 to repair and its doing something similar. He had ir rooted and on latest 5.1.1 (i think). Either way, he said it was randomly locking up and rebooting. When i got it it had the red blinking light when plugged so i got a new battery. That got fixed but then the constant bootloop showed itself. I flashed TWRP (many versions, 2.6.3.1; 2.7.1.1; 2.8.7.1; the one that worked best was 2.7.1.1). So, once in twrp wiped, pushed cm 12 snapshot, flashed it, pushed gapps, falshed, pushe supersu flashed. Started the system. That precise order of things (ie: pushing flashing, then pushing something new and flashing it) was what gave me best results to actually boot up at least once. Once booted up and logging in and everything to cm i had some sort of stability (even rebooting and powering off) but i think that everything went wrong when i plugged the phone to the computer and it was back to bootloops and not even getting to the recovery. Flashed everything again. Didnt work. Had to leave the phone sit for a while (without the back casing) before trying again, in order, before getting any success. Im starting to think of ovrheating but it doesnt even get that hot...
Dunno if you guys have any ideas on this. Or if i can give you mor details to help us out.
Regards!
Looks like I'm having a similar problem to what is described here, as well as http://forum.xda-developers.com/google-nexus-5/help/bootlooped-dont-how-to-enable-debugging-t3215951
I've had one of my Nexus 5 phones running OmniROM 5.1.1 for some time now, very stably. After trying out the Marshmallow preview and going back to that ROM, I started having spontaneous hard reboots and hard crashes. The phone would often boot loop before even getting to the OmniROM boot animation. It was also very recalcitrant about entering and staying in the boot loader, rebooting spontaneously shortly after rendering the boot loader screen. I was occasionally able to "grab" control long enough to get it to boot into TWRP, from which a boot to Android seemed to usually get it out of the loop and into running Android.
I've flashed back the boot loader and baseband from factory-stock 5.1.1 LMY48M (HHZ12h and 2.0.50.2.26) using the flash-base.sh script from a freshly downloaded and extracted hammerhead-lmy48m. Things appeared to be OK last evening and this morning, but things got worse today.
Now the phone is in a state where it is not responsive to the power button when unplugged. I can hold it down for 30 seconds with no response.
If I plug in USB, it spontaneously starts rebooting, not showing more than about two seconds of the Google boot loader screen. If I hold the down-volume button, I can get the boot-loader screen, but no matter how fast I try to be, I can't select anything more than "Restart bootloader" (or "Power off") option before it spontaneously reboots (to boot loader).
As far as I know, the battery had a significant charge before this started happening.
I see the same behavior if the phone is connected to a USB charging source, rather than a USB port.
I've tried pulling the SIM, but that doesn't change the behavior.
adb wait-for-device never returns, so poking it over adb doesn't seem to be an option.
fastboot devices also doesn't see the phone, for the brief time the boot loader is running.
Any suggestions on how to get this into the boot loader so I can at least re-flash it?
Nexus 5 D820(E) 32 GB
Edit:
WaxLarry said:
In my opinion your problems seems power button's related.
Click to expand...
Click to collapse
Trying to see how I can "clean" or "clear" the power button now.
Edit:
Paul22000 said:
This morning my Nexus 5 was turned off all of a sudden after not having used it for 20-30 minutes. I held the power button and nothing. I plugged it into power and the "Google" screen appeared. It then went into a reboot loop on and off, on and off, on and off. I held the Volume Buttons and it went into fastboot, but then boot looped out again and again. Searching on Google yielded that this was indeed a common problem. [...]
Click to expand...
Click to collapse
Edit: Repeatedly pressing the power button seems to have temporarily allowed a boot to Android.
In retrospect, I had noticed over the last few days that the phone didn't seem to respond properly to the power button, either "ignoring" it, or when a second press got things started, it would unexpectedly come up with the long-press-volume menu.
One link on how to replace the power switch yourself is http://protyposis.net/blog/replacing-the-nexus-5-power-button/
Ok @jeffsf keep going on this thread. I had the same damn experience, that ended with RMA. LG said that the problem is related to some tension change in the power button. After the RMA I used the phone totally stock and never had a problem. Two months ago I switched to blu_spark kernel and some weeks after i noticed some problem. When I pressed the button to lock the screen, phone locked itself and then screen turned on, sometimes showing the shutdown option. So i understood that something was happening to the power button. I tried to overvolt with a +5mV on general offset and since then i never had problem. If you can enter recovery or bootloader i suggest you to flash some kernel with volt change support and then overvolt the general offset... and keep finger crossed
jeffsf said:
Looks like I'm having a similar problem to what is described here, as well as http://forum.xda-developers.com/google-nexus-5/help/bootlooped-dont-how-to-enable-debugging-t3215951
I've had one of my Nexus 5 phones running OmniROM 5.1.1 for some time now, very stably. After trying out the Marshmallow preview and going back to that ROM, I started having spontaneous hard reboots and hard crashes. The phone would often boot loop before even getting to the OmniROM boot animation. It was also very recalcitrant about entering and staying in the boot loader, rebooting spontaneously shortly after rendering the boot loader screen. I was occasionally able to "grab" control long enough to get it to boot into TWRP, from which a boot to Android seemed to usually get it out of the loop and into running Android.
I've flashed back the boot loader and baseband from factory-stock 5.1.1 LMY48M (HHZ12h and 2.0.50.2.26) using the flash-base.sh script from a freshly downloaded and extracted hammerhead-lmy48m. Things appeared to be OK last evening and this morning, but things got worse today.
Now the phone is in a state where it is not responsive to the power button when unplugged. I can hold it down for 30 seconds with no response.
If I plug in USB, it spontaneously starts rebooting, not showing more than about two seconds of the Google boot loader screen. If I hold the down-volume button, I can get the boot-loader screen, but no matter how fast I try to be, I can't select anything more than "Restart bootloader" (or "Power off") option before it spontaneously reboots (to boot loader).
As far as I know, the battery had a significant charge before this started happening.
I see the same behavior if the phone is connected to a USB charging source, rather than a USB port.
I've tried pulling the SIM, but that doesn't change the behavior.
adb wait-for-device never returns, so poking it over adb doesn't seem to be an option.
fastboot devices also doesn't see the phone, for the brief time the boot loader is running.
Any suggestions on how to get this into the boot loader so I can at least re-flash it?
Nexus 5 D820(E) 32 GB
Edit:
Trying to see how I can "clean" or "clear" the power button now.
Edit:
Edit: Repeatedly pressing the power button seems to have temporarily allowed a boot to Android.
In retrospect, I had noticed over the last few days that the phone didn't seem to respond properly to the power button, either "ignoring" it, or when a second press got things started, it would unexpectedly come up with the long-press-volume menu.
One link on how to replace the power switch yourself is http://protyposis.net/blog/replacing-the-nexus-5-power-button/
Click to expand...
Click to collapse
I got a notification for this post since you quoted me. I'm not sure if you're having the same problem but I'll tell you what happened to me, just in case. I called T-Mobile and they referred me to the nearest 3rd party phone repair shop. I went there and after an evaluation, the repairman told me the power button on my phone was indeed broken. They replaced it for $55.
The story doesn't end there though. I took my phone home and a few hours later I tried to use bluetooth and it didn't work. I took it back and found out that unfortunately, when the guy replaced the power button, he inadvertently broke the bluetooth. There's no way to fix bluetooth without replacing the motherboard entirely, which would cost $200. I'd rather buy a new phone at that point since my Nexus 5 was getting old. He refunded me, which was nice. At least the power button worked so I could use my phone. Bluetooth isn't as valuable as being able to you know, turn on the phone, so at least it was a net gain.
After that, I purchased a Nexus 6 and rooted it so I could use double-tap-to-wake (along with the automatic screen on when you pick up the Nexus 6). I also use the following app in order to turn off the screen by swiping up from the home button (I don't care about losing the shortcut to Google Now): Screen Off and Lock
I can now literally go weeks without using the power button on my Nexus 6. (I literally only use it when tap to wake sometimes becomes unresponsive which is rare.)
Bottom line: I will never buy another phone without tap to wake functionality! :good:
A local repair shop here indicated that one sometimes does changing the power switch resolve the issue. They have seen situations where the issue appears to be one of the power-management ICs. Just something to be aware of when examining the potential cost of a repair and who you would have do the work.
I've been using HTC U11 Plus as my main phone since the day it came out. I absolutely love this phone. In my opinion it's the best phone I've ever had. I never felt the need to get a new phone. I've been gaming, working, etc. and I never had any issue with it.
Two days ago all of a sudden while using my phone it got stuck. None of the button were working and the screen also had response so I pressed and hold the Power button and Volume Down button to boot into recovery mode. So i could clear cache and reboot again but my phone doesn't seem to reboot. It just turns off when I select reboot now. I even tried "Wipe data/factory reset from the Recovery menu options" and then delete all user data option and then Reboot system now to restart your phone. Still no luck. As soon as I press on reboot system my phone just turns off and doesn't reboot or turn on at all.
Even when I put my phone on charging there is not light to indicate that my phone is charging at all.
PLEASE HELP!!!!
Same problem here... Screen flashed white, phone rebooted to encryption screen to enter pin, then powered off... Hasn't been back on since (thins happened in October 2021).
I'm interested in a possible way to get the data off the phone, even if some parts swapping is involved.
PS. I changed the battery thinking it was that, but the phone still isn't coming on or showing the red battery charging light.
I guess it is time for you both to use ADB. When installed properly you should be able to see your phone in device manager on Windows systems. That in itself would be a good starting point. Or just fire up ADB and check if ADB detects your phone. If you are unfamiliar with ADB, Google it.
In ADB use: *.\adb devices* (without the *) If it works properly you should get a return with a device number. You could then flash a boot image or system image or both and see if your phone start's up again.
Hello,
same Issue here.
Solution is to heat up the Phone above 50°C and hold the temperature while it run and copy Data.
I have spend 40h+ to Backup Data and heat up the Phone.
Seems for me to the same problem like the RROD at Xbox360.
Lead-Free solder at the BGA-Chips.
Hello, so about 2 days ago from now, my device, while waiting for the bus started to bootloop for no known reason. Skipping into this weekend, I have tried almost everything to get it working without the risk of any data loss, unsuccessful I am here.
Right, so the main problem of the device is that it's very unpredictable, that being said, the device doesn't really have a consistent bootloop. First it started off with the usual, constant bootloop, and then when it got enough of that, it shut off, or I just put it into Fastboot mode to shut off, because it wouldn't stop bootlooping. The power button would always restart it. The loop would start at the start of the booting process(MI Logo) and end when the device would turn on the Lock Screen and then about 3 or 5 seconds later it would crash. Meaning that I can change any setting in the top UI, like wifi settings, bluetooth and whatnot(not that it meant anything since I only had about 5 seconds). Then I left it shut off overnight, and the next day I turned it on, and it actually booted... This gave me a lot of time to back up every photo and video in a panic, and I still had a bit of time. First I thought it was bootlooping because the storage was full, so I uninstalled a lot of apps, and moved about 7GB of data onto my PC. Since the problem kept going, I left it overnight once again to retrieve any more data I needed(right now there's still data on it that I need like 2FA tokens and passwords).
By the way the amount of time I was able to spend in the device was about 5 or 8 minutes before it shut off.. Maybe even more, I had time to move the whole gallery onto my PC and still had time. And the second time I had access to it was just recovering more data, that time I also thought of enabling "OEM Unlock" but I decided not to(like an idiot).
This time though I did not wait till the phone restarted on its own, rather the battery fully discharged at 0%. And that put a somewhat permanent "Empty battery logo" on my recovery UI(the one that uses ADB). I can still access ADB, like the menu works it's just that I'm going blind into it, I can click volume down and select options, it's just that I can't see what I'm clicking. I tried booting it the 3rd time, now in even worse condition than before and now it's fully bricked the whole battery system, because meanwhile I was waiting for it to "do it's thing again" so I can access it I decided to charge it. It 100% had enough time to charge to full battery, yet the phone still thinks the battery is empty and wont show me the Recovery UI. And when I manage to get to the Lock Screen the battery shows 2% and there's absolutely no way it's that low. I slept a good hour waiting for it to charge, and that should be at least 70 - 90%.
Right, so I'm thinking it's either a bad battery connector or a faulty temperature sensor that's making the phone crash, because I can only access it once and that's when it fully cools down, since there's nothing going on in it anyway when it's dead. And later when it heats up it crashes.?
But then again, accessing it like 10 or 20 minutes after it naturally shuts off only gives me about 2 or 3 extra seconds when it fully boots even though being cool to to the touch. And leaving it overnight gives me minutes of time.(if)
Right now I have no idea if I will be able to access it ever again, so if I do I'm backing up my tokens and turning "OEM Unlock" on so I can flash it or factory wipe it. And if I don't, my question is.. Is there anything I can do to save this mf phone? Since I don't even know if I have the right idea to why it could be doing this in the first place, and if I can't turn on "OEM Unlock" I can't even factory reset it properly.
I've tried using ADB to pull files, and just use shell, but I can't due to Errors, I also can't boot a custom recovery without OEM. Shutting it off before it shuts off also doesn't do anything.
Tex2083 said:
Hello, so about 2 days ago from now, my device, while waiting for the bus started to bootloop for no known reason. Skipping into this weekend, I have tried almost everything to get it working without the risk of any data loss, unsuccessful I am here.
Right, so the main problem of the device is that it's very unpredictable, that being said, the device doesn't really have a consistent bootloop. First it started off with the usual, constant bootloop, and then when it got enough of that, it shut off, or I just put it into Fastboot mode to shut off, because it wouldn't stop bootlooping. The power button would always restart it. The loop would start at the start of the booting process(MI Logo) and end when the device would turn on the Lock Screen and then about 3 or 5 seconds later it would crash. Meaning that I can change any setting in the top UI, like wifi settings, bluetooth and whatnot(not that it meant anything since I only had about 5 seconds). Then I left it shut off overnight, and the next day I turned it on, and it actually booted... This gave me a lot of time to back up every photo and video in a panic, and I still had a bit of time. First I thought it was bootlooping because the storage was full, so I uninstalled a lot of apps, and moved about 7GB of data onto my PC. Since the problem kept going, I left it overnight once again to retrieve any more data I needed(right now there's still data on it that I need like 2FA tokens and passwords).
By the way the amount of time I was able to spend in the device was about 5 or 8 minutes before it shut off.. Maybe even more, I had time to move the whole gallery onto my PC and still had time. And the second time I had access to it was just recovering more data, that time I also thought of enabling "OEM Unlock" but I decided not to(like an idiot).
This time though I did not wait till the phone restarted on its own, rather the battery fully discharged at 0%. And that put a somewhat permanent "Empty battery logo" on my recovery UI(the one that uses ADB). I can still access ADB, like the menu works it's just that I'm going blind into it, I can click volume down and select options, it's just that I can't see what I'm clicking. I tried booting it the 3rd time, now in even worse condition than before and now it's fully bricked the whole battery system, because meanwhile I was waiting for it to "do it's thing again" so I can access it I decided to charge it. It 100% had enough time to charge to full battery, yet the phone still thinks the battery is empty and wont show me the Recovery UI. And when I manage to get to the Lock Screen the battery shows 2% and there's absolutely no way it's that low. I slept a good hour waiting for it to charge, and that should be at least 70 - 90%.
Right, so I'm thinking it's either a bad battery connector or a faulty temperature sensor that's making the phone crash, because I can only access it once and that's when it fully cools down, since there's nothing going on in it anyway when it's dead. And later when it heats up it crashes.?
But then again, accessing it like 10 or 20 minutes after it naturally shuts off only gives me about 2 or 3 extra seconds when it fully boots even though being cool to to the touch. And leaving it overnight gives me minutes of time.(if)
Right now I have no idea if I will be able to access it ever again, so if I do I'm backing up my tokens and turning "OEM Unlock" on so I can flash it or factory wipe it. And if I don't, my question is.. Is there anything I can do to save this mf phone? Since I don't even know if I have the right idea to why it could be doing this in the first place, and if I can't turn on "OEM Unlock" I can't even factory reset it properly.
I've tried using ADB to pull files, and just use shell, but I can't due to Errors, I also can't boot a custom recovery without OEM. Shutting it off before it shuts off also doesn't do anything.
Click to expand...
Click to collapse
ADB is useless at this stage, through the stock recovery.
By enabling OEM unlock, but not binding your Mi account, to start the unlocking process, it´s also useless, per se.
You can´t flash any partition through fastboot, if the bootloader is locked, by enabling OEM unlock, it´s not enough to.
Try booting to stock recovery, you can wipe your data/factory reset, in case this may help.
But, probably, the issue is with the battery or the battery connector, pay attention to the charger time, and test if the charge level is correct.
Just in case you need to power off your device, you may connect to the PC while you press the volume down button, you´ll get fastboot mode, then disconnect the cable to the PC, device will shut off itself, when the connection time expires, it may takes only seconds.
Tex2083 said:
Hello, so about 2 days ago from now, my device, while waiting for the bus started to bootloop for no known reason. Skipping into this weekend, I have tried almost everything to get it working without the risk of any data loss, unsuccessful I am here.
Right, so the main problem of the device is that it's very unpredictable, that being said, the device doesn't really have a consistent bootloop. First it started off with the usual, constant bootloop, and then when it got enough of that, it shut off, or I just put it into Fastboot mode to shut off, because it wouldn't stop bootlooping. The power button would always restart it. The loop would start at the start of the booting process(MI Logo) and end when the device would turn on the Lock Screen and then about 3 or 5 seconds later it would crash. Meaning that I can change any setting in the top UI, like wifi settings, bluetooth and whatnot(not that it meant anything since I only had about 5 seconds). Then I left it shut off overnight, and the next day I turned it on, and it actually booted... This gave me a lot of time to back up every photo and video in a panic, and I still had a bit of time. First I thought it was bootlooping because the storage was full, so I uninstalled a lot of apps, and moved about 7GB of data onto my PC. Since the problem kept going, I left it overnight once again to retrieve any more data I needed(right now there's still data on it that I need like 2FA tokens and passwords).
By the way the amount of time I was able to spend in the device was about 5 or 8 minutes before it shut off.. Maybe even more, I had time to move the whole gallery onto my PC and still had time. And the second time I had access to it was just recovering more data, that time I also thought of enabling "OEM Unlock" but I decided not to(like an idiot).
This time though I did not wait till the phone restarted on its own, rather the battery fully discharged at 0%. And that put a somewhat permanent "Empty battery logo" on my recovery UI(the one that uses ADB). I can still access ADB, like the menu works it's just that I'm going blind into it, I can click volume down and select options, it's just that I can't see what I'm clicking. I tried booting it the 3rd time, now in even worse condition than before and now it's fully bricked the whole battery system, because meanwhile I was waiting for it to "do it's thing again" so I can access it I decided to charge it. It 100% had enough time to charge to full battery, yet the phone still thinks the battery is empty and wont show me the Recovery UI. And when I manage to get to the Lock Screen the battery shows 2% and there's absolutely no way it's that low. I slept a good hour waiting for it to charge, and that should be at least 70 - 90%.
Right, so I'm thinking it's either a bad battery connector or a faulty temperature sensor that's making the phone crash, because I can only access it once and that's when it fully cools down, since there's nothing going on in it anyway when it's dead. And later when it heats up it crashes.?
But then again, accessing it like 10 or 20 minutes after it naturally shuts off only gives me about 2 or 3 extra seconds when it fully boots even though being cool to to the touch. And leaving it overnight gives me minutes of time.(if)
Right now I have no idea if I will be able to access it ever again, so if I do I'm backing up my tokens and turning "OEM Unlock" on so I can flash it or factory wipe it. And if I don't, my question is.. Is there anything I can do to save this mf phone? Since I don't even know if I have the right idea to why it could be doing this in the first place, and if I can't turn on "OEM Unlock" I can't even factory reset it properly.
I've tried using ADB to pull files, and just use shell, but I can't due to Errors, I also can't boot a custom recovery without OEM. Shutting it off before it shuts off also doesn't do anything.
Click to expand...
Click to collapse
Hey there. Was you issue fixed? I had somewhat of a similar issue. My phone did the same bootloop in two different days. First I thought it was some error after update. I didn't bother. It happened once again and after few times of crashing at lockscreen, it actually booted and I was able to use it for a day. I thought of backing up my stuff but didn't give much attention. Now it have happened once again and this time it is never getting into usable boot. If the battery is sufficient enough, it'll go into lockscreen and crashes repeatedly. Then soon it just crash after the MI Logo and the three loading dots. Safe mode does the same. It boots into lockscreen at times but the safe mode symbol is not seen.
I read you were able to get your data out of it. Did you resolve the issue?