I can't find any cwm recovery suitable for g6-l11 LTE. Can someone help me develop or find one Pls.
-=-♔♚Need help♚♔-=-
There is twrp recovery u can download it from here
https://drive.google.com/file/d/0B-wMRksKspUMNFY1LWI5X1ltMFU/view?usp=sharing
if u have ubuntu x64 & speed internet connection i can help u to compile cwm
How do you get Ubuntu?? I'm. Using windows 7.
-=-♔♚Need help♚♔-=-
I tried flashing the .img and it worked! Thanks :thumbup::thumbup:
-=-♔♚Need help♚♔-=-
Btw if I accidentally installed a wrong version of cynogenmod will my device soft/hard brick?? And if something else happen what should I do??Should I flash stock boot image? Or what??
-=-♔♚Need help♚♔-=-
Btw on my Huawei G6-L11 Android 4.3 Jellybean. Should I install
CM 10.2/CM 7.2 which??
-=-♔♚Need help♚♔-=-
Need CynogenMod for Huawei G6-L11.
-=-♔♚Need help♚♔-=-
Can anyone help me build one?I have issues with sudo. It kept giving me command not allowed.
-=-♔♚Need help♚♔-=-
i'm building one for u10 i can help u pm me ur fb account or any method to contact with you
I found this guid in other forum. It also have a link for a TWRP recovery.
http://www.htcmania.com/showthread.php?t=969144
Direct Link for the TWRP recovery>
https://yadi.sk/d/SSDNtX5xeMeDB
Note - I did not tried it!
This tutorial is what I have done on my device, I hope can use them my help
Emui installed in your device 3.0 beta we need to install this ROM but does not work...
We will need to download the ROM b370 here I leave the linck: https://yadi.sk/d/gqWACWBleVQAG
And we will do the following for installation, after downloaded extractor must install the Huawei on our computer here the link: http://forum.xda-developers.com/show...php?t=2433454
Then with the Huawei exhaust unzip the following
-Boot.img
-Cust.img
-Recovery.img
-System.img
Now you will have to download the android adb and the SDK tools, adb link here: http://www12.zippyshare.com/v/67744317/file.html
And put the adb on the local disk c and in the folder adb, place the custom recovery.
And we will do the following, execute the cmd in windows
And write the following: chdir c:\adb
And execute the following
-fastboot flash cust cust.img
-fastboot flash recovery recovery.img
-fastboot flash boot boot.img
-fastboot flash system system.img
-fastboot reboot
And ready we already have the system installed with the b370 and the system will tell us that it is Huawei p7 mini not the g6-l11
Now we go to the root of this phone
For that the tutorials need recovery twrp here:
http://www.htcmania.com/showthread.php?t=967406
This is a compilation of the user pepe0000 and there was where remove information in 4pda so stay us more clear tutorial
Agradeciemientos to pepe0000 for bringing us this recovery
He clarified that to install this recovery is mandatory to have the unlocked bootloader, but I know here in this link to go back: http://www.htcmania.com/showthread.php?t=939960
This tutorial was made by D.ceres which I also thank you for this tutorial
1.*descargar and unzip the contents of the ADB at the root of the C: drive * http://www12.zippyshare.com/v/67744317/file.html
TWRP G6-L11 2.*Descargue *: https://yadi.sk/d/SSDNtX5xeMeDB
3.*Copy the downloaded content to the folder file root ADB *
4.*Conect the phone to the computer in Fastboot (bootloader). *(Vol-+ botón de encendido)
5.* Holding down the SHIFT key, right-click on the ADB folder and select the option "Open command window" *
6.* In the command prompt, type without quotes "fastboot flash recovery TWRP_G6-L11.img" or if you want to rename to write the name that been placed
Enter 7.*Pulse now and execute the following code "fastboot reboot"
If you want to return to the original recovery you have to download this file: https://yadi.sk/d/cAphF5smcwmUX
And perform the same procedure.
Again I thank Pepe0000 also for your tutorial because of remove the info there and I couldn't do it on my phone
Click to expand...
Click to collapse
After you install the recovery, downloaded the super su, link its here: https://yadi.sk/d/a92MoztteJAKe
We installed it and ready we will have root on our phone...
That's it, this is what I did and I thank 4pda also because of pull out there is rom
Click to expand...
Click to collapse
How abt cyanogenmod for this device?
-=-♔♚Need help♚♔-=-
flightdragonz said:
How abt cyanogenmod for this device?
-=-♔♚Need help♚♔-=-
Click to expand...
Click to collapse
as far as we know no one is working on it,
some people are working on cm12 for G6-U10, maybe later they will port it to the L11
Twrp g6 l11
messi2050 said:
There is twrp recovery u can download it from here
if u have ubuntu x64 & speed internet connection i can help u to compile cwm
Click to expand...
Click to collapse
Maybe you know where can I get new version of TWRP recovery.img for Huawei G6-L11?
Hi.
I want to share the backup Image for Lenovo Vibe Shot (Z90a40) based on Stock S363 ROM. (Make sure you have unlocked bootloader and TWRP installed):
-Download and Unzip "TWRP.zip" in your computer:
Mirror 1: https://www.androidfilehost.com/?w=files&flid=129285
-Enter in TWRP and perform All Wipes.
-Keep in TWRP and connect device to PC and copy unzipped TWRP folder in your phone storage or SDcard.
-Go to Restore and choose the image to be restored
There are two images inside the folder:
-[Stock] Z90a40_S363_160625_ROW-Clean
-[Stock and Rooted] Z90a40_S363_160625_ROW-Rooted
I hope this help anyone.
NOTE: Only checked in Z90a40 phone.
bro tell me... i can recover and my old software or ios??
Hii.. All , I'm using A Lyf wind mobile , I have my my orginginel ( system.img ) file I don't have PC Computer . , I'm using TWRP 3.0 .. Somebody help me how to flash a System.img using TWRP
_ THANKS _
vinay durva said:
Hii.. All , I'm using A Lyf wind mobile , I have my my orginginel ( system.img ) file I don't have PC Computer . , I'm using TWRP 3.0 .. Somebody help me how to flash a System.img using TWRP
_ THANKS _
Click to expand...
Click to collapse
TWRP can flash .img files without having to do anything special.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
TWRP can flash .img files without having to do anything special.
Click to expand...
Click to collapse
Sir .. I was tried , there was only 2 options in TWRP 1st one recovery & 2cond one boot .. Which 1 ican select ,, I need to flash system.img
vinay durva said:
Sir .. I was tried , there was only 2 options in TWRP 1st one recovery & 2cond one boot .. Which 1 ican select ,, I need to flash system.img
Click to expand...
Click to collapse
I dont think you've booted into TWRP yet, I think you're looking at bootloader, select recovery and see if it boots to TWRP.
TWRP has more than just 2 options, are you sure you have TWRP? What version is it? Does it look like this?
http://cloud.tapatalk.com/s/58a730280544c/Screenshot_2017-02-17-12-15-48.png?
If that's what you have, select Install then find your .img and flash it.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
I dont think you've booted into TWRP yet, I think you're looking at bootloader, select recovery and see if it boots to TWRP.
TWRP has more than just 2 options, are you sure you have TWRP? What version is it? Does it look like this?
http://cloud.tapatalk.com/s/58a730280544c/Screenshot_2017-02-17-12-15-48.png?
If that's what you have, select Install then find your .img and flash it.
Click to expand...
Click to collapse
Yes sir I'm Booting Into TWRP , Then > install > install images >. I found 2 options 1st one BOOT 2cond RECOVERY , but I won't to flash SYSTEM.img
vinay durva said:
Yes sir I'm Booting Into TWRP , Then > install > install images >. I found 2 options 1st one BOOT 2cond RECOVERY , but I won't to flash SYSTEM.img
Click to expand...
Click to collapse
I remember now that TWRP doesn't flash system.img correctly, system.img isn't a standard .img, you need PC and use fastboot.
Sent from my SM-S903VL using Tapatalk
Thanks Sir.. Any Another way to flash system , i don't have A PC
vinay durva said:
Thanks Sir.. Any Another way to flash system , i don't have A PC
Click to expand...
Click to collapse
I wouldn't try it without PC
Sent from my SM-S903VL using Tapatalk
vinay durva said:
Thanks Sir.. Any Another way to flash system , i don't have A PC
Click to expand...
Click to collapse
I know it is too late, but you can enter in Advaced > Terminal and then run this command:
dd if=/sdcard/system.img of=/dev/block/bootdevice/by-name/system
If your mobile phone doesnt have by-name symlinks you will need to enter the correct partition.
Aex12 said:
I know it is too late, but you can enter in Advaced > Terminal and then run this command:
dd if=/sdcard/system.img of=/dev/block/bootdevice/by-name/system
If your mobile phone doesnt have by-name symlinks you will need to enter the correct partition.
Click to expand...
Click to collapse
hi aex, I have the same problem but I dont have the folder
/bootdevice/by-name............
can you help me?
it will not work.
try to make a folder and "mount -o loop file in it.
and it will be not mounted also if you specify file system type.
(if it work probably you can use the file)
so ,i don't know how fastboot write in partition or probably
in to file system.
however if you do a dd of your current system partition in a file , after will be correctly mounted , or rewrited correctly in the original partition if you need.
then probably you cannot use fastboot system.img directly in twrp shell (using dd)
this is my experience (e2303 sony / pexorom 3.0 twrp 3.1.1)
if you are searching a fast way to know system partition device block
cat /etc/fstab
and look for system
or just mount system in twrp , then in a terminal do a
df -h
and search for system
for e2303 was /dev/block/mmcblk0p30
(example)
twrp have busybox and light kernel.
so , is linux.
for better support try to ask
tonystark88
u need to use simg2img
(sparse file format compression)
system partition device name can be different on other phones.
done.
img can be write by twrp whitout pc/fastboot.
c'ya
giuseppe
just go to file manager and search for system partition, and on first part type your system.img location and 2 part type just system location
I did this Steps on my Huawei P8. Sim2Img reported a non sparse image, so i moved directly to the DD steps. But after writing the image to the partition, the /system Partition cannot get mountet...
What the hell iam doing wrong ????
I extracted the system.img from an update.app Firmware file.
Its the same Firmware file i flashed before with the dload method.
I want to install TWRP on my Phone with an faulty USB Port. So i have no PC / ADB. I Installed the Firmware via the official Dload Method from Huawai. Then i used this crappy Kingroot to get root and installed TWRP. Now i wanted to flash the stock system partition to get rid of Kingroot for Safetynet.
But why i cant just flash the systempartition ?
Or is there another way to gain root for 15 seconds without traces ?
chr2002 said:
I did this Steps on my Huawei P8. Sim2Img reported a non sparse image, so i moved directly to the DD steps. But after writing the image to the partition, the /system Partition cannot get mountet...
What the hell iam doing wrong ????
I extracted the system.img from an update.app Firmware file.
Its the same Firmware file i flashed before with the dload method.
I want to install TWRP on my Phone with an faulty USB Port. So i have no PC / ADB. I Installed the Firmware via the official Dload Method from Huawai. Then i used this crappy Kingroot to get root and installed TWRP. Now i wanted to flash the stock system partition to get rid of Kingroot for Safetynet.
But why i cant just flash the systempartition ?
Or is there another way to gain root for 15 seconds without traces ?
Click to expand...
Click to collapse
Why not just use the settings in Kingroot to remove root? Or convert from Kingroot to SuperSu then use SuperSu app settings to remove root?
You don't have to flash the stock system to remove root.
Sent from my LGL84VL using Tapatalk
Kingroots uninstall leaves traces in /system/xbin and Safetynet wont work. Why i did not try Supersu ? :-/
But i managed to flash the system.img without problems.
First i tryed an extracted system.img from the Huawei Firmware extractor and Sim2img reported an invalid sparse image. So i thought it must be a raw image.....And this was my mistake. It is a useless image for TWRP.
So i created a flashable zip (TWRP cant flash this, too and the /system partition is not mountable after flashing / installing this zip.
BUT, the system.img INSIDE this zip is a spase image, which sim2img can handle. It gave me a nice raw image which i just dd´d to /system and BINGO, my phone starts up normally
The Short Version :
- Create a FLASHABLE ZIP with the Huawei Firmware Extractor
- use SIM2IMG in TWRP Terminal to get a RAW Image.
- dd´it to the /system partition
System img
You use the restore in twrp to flash your system img, you just until the other boxes
Edit: Sorry wrong thread
Lenovo K5 Pro ROM img
After flashing img file (using TWRP 3.3.1) the phone (Lenovo k5 pro) starts in bootloader mode. Everyone can help?
Help u
Hi u can download a deodexed rom because ais doesn't support some stock roms for ex ch Samsung roms. then decompile it.then decompile it with rar or zarchiver or etc. Then install android image studio (ais) from google
Then open it and tap unpack/mount and select system.img or system.img.ext4 file in decompiled rom . After mounting, copy all files to a directory for ex emulated/0/system/system or another. Attention if you copy it in another directory, rename it as (system) now copy the boot.img from decompiled rom into emulated/0/system .then download this file
https://forum.xda-developers.com/an...oid-o-beta-redesigned-emoji-set-t3608280/amp/
Extract meta-inf file into emulated/0/system using winrar or zarchiver or etc. Now you need to have a system folder,boot.img file and a Meta-inf in diractory emulated/0/system. Now compress system,boot.img and meta-inf into one archive and after completing, turn of your device and boot it into twrp recovery and wipe data and cache without wipping internal storage then select install. Then tap select storage and select internal storage.then go to the file and select it and turn off zip singuature verification and install it after installing tis rom, install root zip file and wipe cache/dalvik art and then reboot your device. It may take between 5-25 minutes to boot. Enjoy your new rom
#issues
Sometimes your device maybe take bootloop so you need to install your stock boot.img file and after installing your root zip file choose wipe cache/dalvik art and then reboot your system.
#Alert
1.Don't install the recovery.img file which exists in the decompiled rom because it takes your device into recovery mod and not boot anymore and after you need to install the stock rom using PC
2.your device maybe take bootloop in this method so do it with your own risk
---------- Post added at 07:58 AM ---------- Previous post was at 07:53 AM ----------
ShmuelCohen said:
After flashing img file (using TWRP 3.3.1) the phone (Lenovo k5 pro) starts in bootloader mode. Everyone can help?
Click to expand...
Click to collapse
Reboot your device and install twrp official app and open it and select flash image from a directory and select your own twrp and reboot your device [root]
Connect your phone to a PC and install stock rom using ADB or another app which was made for your smartphone [no root]
[ TWRP 3.0.2-r5 for G6 3G versions ]
I porte TWRP lux 3.0.2-r5 now for G6 3G devices ( U10, U251, etc )!
I had made a version for LTE version to and it works!
Who want to test the 3G version??? ( i can´t no longer have a G6 )
This is the TWRP image ->https://mega.nz/#!3tgRHQ4Z!acCuRdz92ST9PoKxZMB242QAwO4ejrcxVuhHZPkPi-U
With this TWRP you can do backup to PC directly thrue ADB.
Just plug the USB cable, boot in TWRP and execute ADB.
This is the comand for system backup:
adb backup -f SYSTEM.img --twrp system
And it will backup to your ADB folder
If you test it tell me if worked for you!!!
Thanks!
Perfect, thanks!
Restore
I want to restore stock recovery for local update (dload)
What should i do ???
I flashed this recovery using the previous version of TWRP and it works completely fine. Good job!
It works on G6-U10
Used to backup system
There is no need to flash it, you can
1) Go to fastboot mode using
# ./adb reboot bootloader
2) launch the actual twrp using
# ./fastboot boot /home/damiano/work/androida/Huawei-P6-U10/twrp-lux-3.0.2-r5_G6.img
Thanks for providing it, with all the money wasted to wargames it would be correct that a decent wage be given to you guys !!
Maybe we should do a petition ?
Link Expired:crying:
Hello I Port TWRP 3.3.1. and Magisk Manager v23 for rooting BV9900 with Firmware BV9900_EEA_S900AA_V1.0_20200522V12_user_20200523-0035!
If you have Firmware BV9900_EEA_S900AA_V1.0_20191225V08_user_20200103 Update to BV9900_EEA_S900AA_V1.0_20200522V12_user_20200523-0035.
instructions:
You must follow a procedure!
Make Backup because your data will be wiped!
Unlock Botloader!
Flash Firmware BV9900_EEA_S900AA_V1.0_20191225V08_user_20200103 with SP Flash tool -Includet Scatter File
Offical Firmware:
MEGA
MEGA provides free cloud storage with convenient and powerful always-on privacy. Claim your free 20GB now
mega.nz
Boot system
Connect wifi internet
Make system update to version BV9900_EAA_S900AA_V1.0_20200522V12_20200523-0035 - Normal Update in the Phone
Run on PC adb Tool and flash Vbmeta.imf from TWRP Folder:
adb devices
adb reboot-bootloader
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Power on Mobile
Power off Mobile
Run Sp Flash tool and Flash:
(RECOVERY)TWRP-Recovery 3.3.1.img and
(BOOT)-Boot-Magisk23.img with SP Flash Tool
Disconect Phone from PC
HOLD KEY UP and POWER. Then click Recovery.In TWRP-Recovery Slide "Swipe to Allow Modifications"
Go "Mount" Vendor and nvada
////If you cant mount Data Partition in TWRP-Recovery:
Format Data Partition In TWRP Recovery - You must Formating data not Wipe
Wipe Dalvik/Cache
Reboot to Recovery (check now if you can mount data)
/////
Copy File from BV9900 TWRP&Magisk/fstab/Vendor/etc to vendor/etc
Copy File from BV9900 TWRP&Magisk/fstab/nvdata to nvada
Reboot to System
Instal magisk apk from your launcher....Click ok and restart phone.
Now you can login to google acount.
If you have problem with loading Widgets find build.prop file in mobile or download from Playstore BuildProp Editor
This problem is solved very easily with root access. You just need to fix one line in the build.prop file:
ro.freeme_freemanager=1
ro.hct_autostart_manager=1
In these lines you need to change 1 to 0
Magisk manager works without TWRP great
In TWRP recovery dos not work mtp
And big problem with TWRP is if you formating data then mobile can not recognize sim card (IMEI null,baseband unkown)
If anybody have solution thanks.
Android 10?
Android 9
How remove Chinese text? Thank You.