Database Info

Bricked?

Hello community
I think i bricked my P8 MAX.
What i did, rooted the phone with Kingroot, altered the Dualwindow file.
Three days ago i tried to install B209 and now it won´t boot up.
I always stay at the animated Huawei Logo.
erecovery is not able to load a Firmware and when i try to do something in Fastbbot, i always get remote command not allowed. In Fastboot it says PHONE Unlocked....
Any suggestions?

audiaudi said:
Hello community
I think i bricked my P8 MAX.
What i did, rooted the phone with Kingroot, altered the Dualwindow file.
Three days ago i tried to install B209 and now it won´t boot up.
I always stay at the animated Huawei Logo.
erecovery is not able to load a Firmware and when i try to do something in Fastbbot, i always get remote command not allowed. In Fastboot it says PHONE Unlocked....
Any suggestions?
Click to expand...
Click to collapse
Which Rom where installed before you updated to B209?

Hirs_E_Fruit said:
Which Rom where installed before you updated to B209?
Click to expand...
Click to collapse
B029

audiaudi said:
B029
Click to expand...
Click to collapse
Stock B029 with Stock Recovery?
OTA Update from B029 to B209?

Stock b029 with stock recovery
Rooted
B209 update through dload folder
I downloaded the b209 form kangvip thread, but the regular one.

audiaudi said:
Stock b029 with stock recovery
Rooted
B209 update through dload folder
I downloaded the b209 form kangvip thread, but the regular one.
Click to expand...
Click to collapse
You never got your Phon to start full into OS after update?

Nope

Does anybody know, why i always get remote command not allowed when using fastboot?

audiaudi said:
Does anybody know, why i always get remote command not allowed when using fastboot?
Click to expand...
Click to collapse
hey you only need flash these files from update.app
boot
cust
recovery
cache
system
reboot and when Android is finish booting copy the update.app to /dload in internal storage and reset factory... then... upgrade from internal storage... BACKUP you NVRAM contents but no lost IMEI how is my case

I can't....
fastboot flash boot boot.img
I get: remote command not allowed

do you have the BOOTLOADER UNLOCK ?..
fastboot oem unlock CODE
??
audiaudi said:
I can't....
fastboot flash boot boot.img
I get: remote command not allowed
Click to expand...
Click to collapse

On the screen it shows phone unlocked but i don't know if it's true cause I didn't unlock so it must have been unlocked before.
And i can't get an umlock code through the Huawei site cause i haven't the huawei id on the phone long enough and know, obviously i can't....

audiaudi said:
On the screen it shows phone unlocked but i don't know if it's true cause I didn't unlock so it must have been unlocked before.
And i can't get an umlock code through the Huawei site cause i haven't the huawei id on the phone long enough and know, obviously i can't....
Click to expand...
Click to collapse
I unlock bootloader with a paid tool..( dont say the name this tool... ), cost to 5 dlls USA

audiaudi said:
Hello community
I think i bricked my P8 MAX.
What i did, rooted the phone with Kingroot, altered the Dualwindow file.
Three days ago i tried to install B209 and now it won´t boot up.
I always stay at the animated Huawei Logo.
erecovery is not able to load a Firmware and when i try to do something in Fastbbot, i always get remote command not allowed. In Fastboot it says PHONE Unlocked....
Any suggestions?
Click to expand...
Click to collapse
Try this version of fastboot...
https://drive.google.com/folderview?id=0B5I_q70mNuR4bWp5Wl9LOGdFQnc

ajsmsg78 said:
Try this version of fastboot...
https://drive.google.com/folderview?id=0B5I_q70mNuR4bWp5Wl9LOGdFQnc
Click to expand...
Click to collapse
The same...
C:\test>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (23406 KB)...
OKAY [ 0.511s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.529s

you extract the img files with a profile ??? I use the unknow... other... and mmmm you probe the names of file and partition are diferent ?
fastboot flash boot BOOT.IMG ...(name of file exactly )

same problem in here...
someone can help us?
FAILED (remote: Command not allowed)

same problem here.. please help us

Huawei P8 Max DAV703 Android 6.0 EMUI 4.0 64 GB chinese variant trying to convert to EU
Well I hope that it isn't completely FUBAR.. I know there has to be a way, but i forget how.
No fastboot, no adb support.. no recovery, no bootloader.. fastboot was only available through software.
I have hard reset which has reset it to bootloop, and I have system upgrade that whatever I do, crashes at 5%
Basically, I bricked my Huawei.
I partially rooted it with kingoroot without doing anything..
but other apps saw it as unrooted so i was going to do the proper way, unlock bootloader, etc..
Then I discovered the Huawei SRK tool for bootloader/kernel/recovery etc.
Checked if my bootloader was unlocked, it was..
restarted the phone, it was fine
Then I was going to flash the recovery, and that's when it went into a bootloop
Like always.. just the logo shows, and if i try to turn it off, it restarts.
Huawei P8 Max DAV703 Android 6.0 EMUI 4.0
hard reset works - pressiing vol up down and power pushes it into hard reset but it stays in bootloop.
usb in, vol down power - puts into update mode which stops at 5% with error.
My next idea would be to try and extract the necessary files and try to use the Huawei update extractor tool
but after trying many update files, I can't find the one that would work, unless it will just keep crashing at 5% always.
Would anyone know what I could do in this situation?

can i hope to restart my huawei mate 7?

hi guys, i have done issues on issues on this phone, at begin I accindentally formatted the system by a cwm recovery, i tried all to make another one,after a lot of process i realized that it was not possible, i had first tried to flash a rom b cwm and he gived me and error like,func NO:10(func_BOOt_recovery)
error NO:2. I solved this with a program that gived me a recovery stock, I was 4.4 on my phone before the accident, i tried all the update, 4.4,5.1.6.0 with normal combination (power but, butt + butt-) with stock recovery, it start the process but at 98% stop, in every case. so I tried to create a flashable rom with cwm thanks to huawei update exatractor, tried the process, and now i'am really blocked, if i try to go in recovery the phone give me the problem error: NO:12 (func_load_iom3) error NO:1,I tried to change recovery by fastboot mode, but nothing, whit any recovery the phone say to me the same error. can u help me? sorry for my bad eng thank you.

Do you remember what firmware you have before format system in Cwm???? If you remember download that same firmware and extract using huawei update extractor and flash this partitions in fast boot.
If you have 4.4.2 flash system.img , boot.img , recovery.img, userdata.img and after this try go to recovery and write what it's happan
Send from ? . If I help you buy me ?

chudy_85 said:
Do you remember what firmware you have before format system in Cwm???? If you remember download that same firmware and extract using huawei update extractor and flash this partitions in fast boot.
If you have 4.4.2 flash system.img , boot.img , recovery.img, userdata.img and after this try go to recovery and write what it's happan
Send from . If I help you buy me
Click to expand...
Click to collapse
i have 4.4.2 but when i try to flash system.img or something else fastboot say to me
target reported max download size of 471859200 byte
error: cannot load 'recovery.img': No error

Unlock bootloader again with your code
Send from ? . If I help you buy me ?

chudy_85 said:
Unlock bootloader again with your code
Send from . If I help you buy me
Click to expand...
Click to collapse
in my phone screen appear fastboot and rescue mode phone unlocked, anyway i tried but adb don't recognize my phone

Install hi suite and then install adb on C:/
Cmd as admin and then write this command
cd C:/adb
Fastboot devices
And check do you have here your S/N number
Send from ? . If I help you buy me ?

chudy_85 said:
Install hi suite and then install adb on C:/
Cmd as admin and then write this command
cd C:/adb
Fastboot devices
And check do you have here your S/N number
Send from . If I help you buy me
Click to expand...
Click to collapse
when i try fastboot oem unlock it give me this error:
FAILED (remote: data parse fail)
finished. total time: 0.002s

It's mean you have unlocked bootloader. You break your system partition and you must flash only backup using twrp or you must try flash img file by fast boot. If you can you can try repair your mate 7 using DC unlocker. Search in google and check how they repair smartfone but you must buy some credits to work!!! 4 credits it's 4 euro. Read how much you need
Send from ? . If I help you buy me ?

chudy_85 said:
It's mean you have unlocked bootloader. You break your system partition and you must flash only backup using twrp or you must try flash img file by fast boot. If you can you can try repair your mate 7 using DC unlocker. Search in google and check how they repair smartfone but you must buy some credits to work!!! 4 credits it's 4 euro. Read how much you need
Send from . If I help you buy me
Click to expand...
Click to collapse
with a program i have flashed system.img cust.img recovery .img but I read on internet that the problem is the file senshorhub.img, this programm didn't flash it, and i can't by fastboot for various issues,also if i flash recovery or system recovery's phone doesn't work. i have an answer why fastboot should not work instead dc unlocker can work?

correct you must use dc phoenix. This program can flash full firmware. Read about here ----> https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial

Very hard brick

Hi!
Okay, this case is really weird and of course is thanks to my negligence. I'm gonna post it hoping someone can help me, or at least keep other people aware about trying stupid things lol
I tried to update to Nougat with an unofficial method (I don't consider necessary to tell what method...) and I just messed it up, badly. I'll try to give a detailed explanation:
The phone has the bootloader unlocked. After trying to update to Nougat, it got stuck when rebooting. After the unlocked bootloader warning message, the phone won't go further than that, it just stays there. If I hold and press the power button for more than 10 seconds the phone won't shut down, it will restart to get stuck again after the unlocked BL warning, making impossible to turn it off completely.
I try to enter to stock recovery by pressing vol + and power button at the same time (tried other combinations, vol - and power button & vol -, vol + and power button) but I have no luck, it just gets stuck at the same point.
I already tried extracting BOOT.img, RECOVERY.img, CUST.img and SYSTEM.img from an official update.app and flash them in that order via fastboot (yeah, I can enter to fastboot mode). The process is successful in terminal (I use Linux) but when I reboot the phone, it gets stuck again after the warning.
The only recovery that is actually working is TWRP, the one ported for the Honor 8 (flashed via fastboot), but it won't let me install any custom ROM, it just stays in "patching image unconditionally" forever, making me press and hold the power button but this won't shutdown the phone, it reboots, gets stuck and... so on *infinite loop*
Btw, when I wipe cache, dalvik and data in TWMP, the message "failed to mount /cust" with red letters appears, so it's probably a very corrupted system partition. also, It's impossible to repair the custom partition. This appears:
Repairing Custom using e2fdck...
/sbin/e2fsck -fp /devblock/mmcblk0p44 process ended with ERROR: 8
Unable to repair Custom.
Click to expand...
Click to collapse
Tried HiSuite from Huawei (in Windows) and it doesn't even recognize the phone.
Hope somebody could possibly give a solution, if there's any. If not, I'm afraid I have a beautiful paperweight now...
Oh yeah, one very important part: my Honor 8 is the US version (FRD-L04), and yes, I'm making sure I'm getting the current update.app for this model.
Any help would be greatly appreciated. Thanks in advance.

Hi There
you try this method.
Get a SD CARD
make a directory at the card root name dload
put your best update.app in the directory (the most older version the best)
insert into your phone 2nd sim slot
try everyway to make the 3 button combo.
hope this help
edit: you need stock recovery to do this

chongns said:
Hi There
you try this method.
Get a SD CARD
make a directory at the card root name dload
put your best update.app in the directory (the most older version the best)
insert into your phone 2nd sim slot
try everyway to make the 3 button combo.
hope this help
edit: you need stock recovery to do this
Click to expand...
Click to collapse
Hey, thanks!
unfortunately, as far as I know is that for this method I have to enter to stock recovery, but then again, I can't get in. The phone gets stuck trying any combination of pressed buttons... But I'll try it.
Edit: Trying your method right now, hope it goes well...

El Brillantinas said:
Hey, thanks!
unfortunately, as far as I know is that for this method I have to enter to stock recovery, but then again, I can't get in. The phone gets stuck trying any combination of pressed buttons...
Click to expand...
Click to collapse
Yes, but since you r able to go into TWRP, can your use adb command like adb reboot bootloader than flash stock recovery image?
after that since it is keep rebooting, you can hold your volume up and down all the way to force update.
IDK if this work. but no harm to try it, since it is "very hard brick"
Edit: Fastboot erase {partition} before flash back the image maybe help

chongns said:
Yes, but since you r able to go into TWRP, can your use adb command like adb reboot bootloader than flash stock recovery image?
after that since it is keep rebooting, you can hold your volume up and down all the way to force update.
IDK if this work. but no harm to try it, since it is "very hard brick"
Click to expand...
Click to collapse
Yep, I'm trying it now and right now is installing the update (the EMUI logo with the circular progress bar). Hope it works *crossed fingers*
Edit: No luck. After the process finished, it says:
Software install failed!
Get help from: http//www.emui.com/emotionetcetc.
Click to expand...
Click to collapse

El Brillantinas said:
Yep, I'm trying it now and right now is installing the update (the EMUI logo with the circular progress bar). Hope it works *crossed fingers*
Edit: No luck. After the process finished, it says:
Click to expand...
Click to collapse
I assume you having the update.app from a L04 full firmware, not the OTA.
for the not able to repair partition like custom maybe you can erase it using fastboot erase command and fastboot flash it back
or you can fastboot erase all the known partition like system, cache, data, custom etc.... and fastboot flash back the image.
i assume your fastboot still able to access

chongns said:
I assume you having the update.app from a L04 full firmware, not the OTA.
for the not able to repair partition like custom maybe you can erase it using fastboot erase command and fastboot flash it back
or you can fastboot erase all the known partition like system, cache, data, custom etc.... and fastboot flash back the image.
i assume your fastboot still able to access
Click to expand...
Click to collapse
I did it!!
I could bring it back following some of your methods. Here's how I achieved it:
-Formatted the Custom partition in fastboot.
-Flashed BOOT.img, RECOVERY.img, CUST.img and SYSTEM.img again.
-Forced the update by putting the entire firmware in the dload folder located in the sdcard, it failed at the end, but I rebooted by pressing and holding the power button.
-The phone passed beyond the point where it was getting stuck (finally!), but now it got stuck in the Honor 8 blue screen. Rebooted it again doing coldboot.
-Entered to stock recovery, wiped everything.
Then I just rebooted it and Voalá! It started all new!
Guess it was not that hard brick haha. I'll have to change the name of the topic.
A million thanks @chongns, you rock!

El Brillantinas said:
I did it!!
I could bring it back following some of your methods. Here's how I achieved it:
-Formatted the Custom partition in fastboot.
-Flashed BOOT.img, RECOVERY.img, CUST.img and SYSTEM.img again.
-Forced the update by putting the entire firmware in the dload folder located in the sdcard, it failed at the end, but I rebooted by pressing and holding the power button.
-The phone passed beyond the point where it was getting stuck (finally!), but now it got stuck in the Honor 8 blue screen. Rebooted it again doing coldboot.
-Entered to stock recovery, wiped everything.
Then I just rebooted it and Voalá! It started all new!
Guess it was not that hard brick haha. I'll have to change the name of the topic.
A million thanks @chongns, you rock!
Click to expand...
Click to collapse
Good to know you succeed.
please tag a moderator to move your thread to Guide, News and Discussion section..
most of the time ppl search solution at there.

Guide in another Huawei phone XDA forum.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969

Moderatos, can you please move this topic to the Guides and discussion section? Thanks in advance.

Glad you fixed it bro. That was very critical.

El Brillantinas said:
Moderatos, can you please move this topic to the Guides and discussion section? Thanks in advance.
Click to expand...
Click to collapse
good to hear u go phone back , and there is another guides already exist to restore a framware throw the same method , thank you for sharing ur experience .

Here's the issure I'm having. My Honor 8 FRD-L04 is stuck at a hard brick. It won't reach the recovery. I tried to flash images using fastboot. But I end up with the error: FAILED (remote: Command not allowed)
Any help would be appreciated

bho01 said:
Here's the issure I'm having. My Honor 8 FRD-L04 is stuck at a hard brick. It won't reach the recovery. I tried to flash images using fastboot. But I end up with the error: FAILED (remote: Command not allowed)
Any help would be appreciated
Click to expand...
Click to collapse
Is your frp status lock in fastboot?

faizalotai said:
Is your frp status lock in fastboot?
Click to expand...
Click to collapse
No it's unlocked

bho01 said:
No it's unlocked
Click to expand...
Click to collapse
Your phone status?

faizalotai said:
Your phone status?
Click to expand...
Click to collapse
Still can't get into recovery and I'm still getting the "FAILED(Command not allowed)" error whenever I try to flash stock images

bho01 said:
Still can't get into recovery and I'm still getting the "FAILED(Command not allowed)" error whenever I try to flash stock images
Click to expand...
Click to collapse
I mean your phone status in fastboot.
Its comes with frp and phone status..both have to be unlocked in order to flash images.

Try using the dload method of flashing

faizalotai said:
I mean your phone status in fastboot.
Its comes with frp and phone status..both have to be unlocked in order to flash images.
Click to expand...
Click to collapse
Also unlocked

Honor 8 Hard Bricked

Hello,
My honor 8 is hard bricked, yesterday I wished to install custom Rom and it was encrypted so I decided to return to EMUI, I installed stock recovery I installed rollback package to emui 4.1 and emui 4.1 now i'm stuck on boot screen. I already do a format data and wipe cache but nothing.
Please help me.
EDIT : I can go to ADB but I have this message when I try to flash anything... "FAILED (remote: Command not allowed)" FRP is locked

Please help me I'm so bored about this problem

There are some guides on how to unbrick phone with FRP locked... You could try to watch on them.
That's mine guide

ScardracS said:
There are some guides on how to unbrick phone with FRP locked... You could try to watch on them.
That's mine guide
Click to expand...
Click to collapse
The problem is when i use ADB command it wrongs me
"target reported max download size of 471859200 bytes
sending 'recovery' (36996 KB)...
OKAY [ 0.894s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.903s"

If you can't find any solution with ADB, as a last resort you could use DC Phoenix to fix it. But it costs 15 Euros to use it. That's what I had to do fix the same problem you have.

BnK1986 said:
The problem is when i use ADB command it wrongs me
"target reported max download size of 471859200 bytes
sending 'recovery' (36996 KB)...
OKAY [ 0.894s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.903s"
Click to expand...
Click to collapse
Go with dload method. Try downloading the full firmware for your model and use the 3 combination to flash. There is quick guide in my signature if you are not aware of the exact method for dload.

shashank1320 said:
Go with dload method. Try downloading the full firmware for your model and use the 3 combination to flash. There is quick guide in my signature if you are not aware of the exact method for dload.
Click to expand...
Click to collapse
I can't do dload method it shows me boot screen.

BnK1986 said:
I can't do dload method it shows me boot screen.
Click to expand...
Click to collapse
You may not be doing it right. Assuming.
Keep trying couple of times, remember to press power up+powet down 1st and then power key and keep pressing all together

shashank1320 said:
You may not be doing it right. Assuming.
Keep trying couple of times, remember to press power up+powet down 1st and then power key and keep pressing all together
Click to expand...
Click to collapse
Yes I know i was doing this before and it worked but now it's not possible I will try several times like 5-10 times in a row

BnK1986 said:
Yes I know i was doing this before and it worked but now it's not possible I will try several times like 5-10 times in a row
Click to expand...
Click to collapse
are you able to get into fastboot or recovery?

shashank1320 said:
are you able to get into fastboot or recovery?
Click to expand...
Click to collapse
No I hold the 3 buttons it shows me boot screen, black screen for 1 second and again boot screen

shashank1320 said:
are you able to get into fastboot or recovery?
Click to expand...
Click to collapse
Any solutions?

BnK1986 said:
Any solutions?
Click to expand...
Click to collapse
You can enter in fastboot, by pressing volume down when the phone is powering on and holding the button, immediately insert the usb cable (already plugged in the pc) and you will enter in fastboot.
Video
Sent from my FRD-L09 using XDA Labs

grilla99 said:
You can enter in fastboot, by pressing volume down when the phone is powering on and holding the button, immediately insert the usb cable (already plugged in the pc) and you will enter in fastboot.
Video
Sent from my FRD-L09 using XDA Labs
Click to expand...
Click to collapse
I can do this but ADB commands not working

BnK1986 said:
I can do this but ADB commands not working
Click to expand...
Click to collapse
When you enter in this shell, you are not allowed to use ADB commands, but only fastboot commands, previously you typed adb devices, now you can't. But if you type fastboot device it will shown you your id number plus device, just try if what i sad is true
Sent from my FRD-L09 using XDA Labs

tnks !!!! friend save _me !!!!!

hey i have the same problem
what did you exactly do in fastboot mode? no commands works on my phone

Honor v 10 softbricked!?

Under AICP14 i had significant problems with Bluetooth, so I'm back to the latest pie version via erecovery ... all right. Then in preparation for root in TWRP noticed that data is again encrypted. So reset to factory settings via twrp, rebooted into the TWRP3.2.3-3 and formatted data with yes. Thereafter, on the screen was "formatting done," but down the blue animation was still running around, about 10 minutes, apparently hung. Since I could not do anything else, power button long pressed and booted again into the TWRP, but the hangs at the entrance screen, probably clear in the unsuccessful attempt to decrypt data. The Erecovery with the ability to restore the system and the stock recovery is not reachable for me, with everything I've tried. Fastboot is still to reach ... When booting the device will always hang at the inscription "The device is booted" ...has someone an idea? ? Thanks for thinking!
How to restore erecovery? It was pie, latest version installed from erecovery on the device before this crash...

Flash the erecovery partition. Extract the IMG from the update.zip file and flash the same.

shashank1320 said:
Flash the erecovery partition. Extract the IMG from the update.zip file and flash the same.
Click to expand...
Click to collapse
Got an error trying to extract:

borisku said:
Got an error trying to extract:
Click to expand...
Click to collapse
Go to settings and disable checksum or some verification. Dont remember the exact one but its there in setting

shashank1320 said:
Go to settings and disable checksum or some verification. Dont remember the exact one but its there in setting
Click to expand...
Click to collapse
I Managed to extract ERECOVERY_RAMDI.img and ERECOVERY_RAMDI.img header... i also extracted SYSTEM.img/header and RECOVERY_RAMDIS.img/header frum the update.app
Is it correcht to follow this syntax:
fastboot flash erecovery_ramdisk ERECOVERY_RAMDI.img
to reflash the erecovery? btw. i dont know the exact version of the firmware i installed, it was yesterday i think it had been BKL-L09 (9.0.0.233) C432E4R1P12 , but i cant find that as an update.zip. So i took BKL-L09C432E4R1P8B108-log (9.0.0.108) and extracted the files from there...

borisku said:
I Managed to extract ERECOVERY_RAMDI.img and ERECOVERY_RAMDI.img header... i also extracted SYSTEM.img/header and RECOVERY_RAMDIS.img/header frum the update.app
Is it correcht to follow this syntax:
fastboot flash erecovery_ramdisk ERECOVERY_RAMDI.img
to reflash the erecovery? btw. i dont know the exact version of the firmware i installed, it was yesterday i think it had been BKL-L09 (9.0.0.233) C432E4R1P12 , but i cant find that as an update.zip. So i took BKL-L09C432E4R1P8B108-log (9.0.0.108) and extracted the files from there...
Click to expand...
Click to collapse
As long as it is pie erecovery, it should work fine. Yes, flash that file.

shashank1320 said:
As long as it is pie erecovery, it should work fine. Yes, flash that file.
Click to expand...
Click to collapse
No success:
sending erecovery_ramdisk (32768KB)
okay [0.707s]
writing 'erecovery_ramdisk
FAILED (remote: command not allowed)
or should i flash to recovery_ramdisk not to Erecovery_ramdisk?

borisku said:
No success:
sending erecovery_ramdisk (32768KB)
okay [0.707s]
writing 'erecovery_ramdisk
FAILED (remote: command not allowed)
Click to expand...
Click to collapse
Is your bootloader still unlocked? There was a guide i posted in v10 section for going back to stock if that's what you are interested.

shashank1320 said:
Is your bootloader still unlocked? There was a guide i posted in v10 section for going back to stock if that's what you are interested.
Click to expand...
Click to collapse
Phone unlocked
FRP unlock
i try to come back to erecovery to install latest Emui 9, and from that point i want to return to AICP14...
@edit: I got it following this post:
https://forum.xda-developers.com/showpost.php?p=78752217&postcount=22
i reached erecovery and i´m installing 9.0.0233 via wifi.... hope it wil run til its completed
The most ****ty problem comes if you want to remove the idiotic encryption via formatting data partition in twrp with the red "yes" ...
Thanks to shashank1320!