Related
So I'm under the impression that the glass panel that covers the LCD is not made of gorilla glass, meaning it would (in theory) scratch relatively easily. This almost certainly necessitates a screen protector, then.
However, I'm only able to find tempered glass protectors (which would be a great added bit of protection) atm, and I hate them because of the dreaded "halo effect" that totally defeats the purpose of the bezel-less display. I've been a fan of the "helicopter-polymer" screen protectors, as once they're stuck, they're stuck; however, I'm unable to find any of those.
I snagged some of the cheapo "transparent-film" protectors (only redeeming part is they give you like 6 in a pack), hoping that I'll be able to get those to stick all the way down around the edges.
Anybody found a screen protector they like?
watch the youtube video where the scratch test is performed. it is near impossible to scratch the screen. i can't see any reason to use a screen protector on this phone given that the scratch test performed as well or better than any other flagship device
edit here it is
https://www.youtube.com/watch?v=_CZj-l9MJmg
I have the mi mix pro version and using this glass screen protector. http://www.ebay.com/itm/142182915322
Perfect fit but has the rainbow effect on the middle of the screen. It looks like it disappears as time goes on though. It's edge to edge no halo.
Sent from my MIX using Tapatalk
bigcc32 said:
So I'm under the impression that the glass panel that covers the LCD is not made of gorilla glass, meaning it would (in theory) scratch relatively easily. This almost certainly necessitates a screen protector, then.
However, I'm only able to find tempered glass protectors (which would be a great added bit of protection) atm, and I hate them because of the dreaded "halo effect" that totally defeats the purpose of the bezel-less display. I've been a fan of the "helicopter-polymer" screen protectors, as once they're stuck, they're stuck; however, I'm unable to find any of those.
I snagged some of the cheapo "transparent-film" protectors (only redeeming part is they give you like 6 in a pack), hoping that I'll be able to get those to stick all the way down around the edges.
Anybody found a screen protector they like?
Click to expand...
Click to collapse
Hey, did the cheapo screen protectors work? I'm looking for a solution as well.
I Used Ali Express to purchase cases and screen protectors from China. You can download app from Play Store
Haven't Arrived Yet
jimtim1980 said:
Hey, did the cheapo screen protectors work? I'm looking for a solution as well.
Click to expand...
Click to collapse
They haven't arrived yet, but I will post a review as soon as they do.
bigcc32 said:
They haven't arrived yet, but I will post a review as soon as they do.
Click to expand...
Click to collapse
I'm riding naked right now. Couldn't take it anymore. Screen is too beautiful not to see. I'm using the phone for entertainment now until better cases arrive at my house.
I ordered some screen protectors as well.
jimtim1980 said:
I'm riding naked right now. Couldn't take it anymore. Screen is too beautiful not to see. I'm using the phone for entertainment now until better cases arrive at my house.
I ordered some screen protectors as well.
Click to expand...
Click to collapse
Hardness test proved the ceramic is an 8, and the glass screen is a 6 (supposedly on par with most other flagship devices, even though there's supposedly no gorilla glass. I've been using it as my every day for about 2 weeks now, and the screen is pristine. I would like a film protector, but if it interferes with the otherwise gorgeous display, I may just run naked.
The case on the other hand is, in my opinion an absolute must. I like the one that came with it, and it seems like it would be pretty protective. I have no intention of accidentally dropping my cherished device (nor testing to see, even though it's insured), but it seems like minor drops might actually be handled quite well by the OEM case.
bigcc32 said:
Hardness test proved the ceramic is an 8, and the glass screen is a 6 (supposedly on par with most other flagship devices, even though there's supposedly no gorilla glass. I've been using it as my every day for about 2 weeks now, and the screen is pristine. I would like a film protector, but if it interferes with the otherwise gorgeous display, I may just run naked.
The case on the other hand is, in my opinion an absolute must. I like the one that came with it, and it seems like it would be pretty protective. I have no intention of accidentally dropping my cherished device (nor testing to see, even though it's insured), but it seems like minor drops might actually be handled quite well by the OEM case.
Click to expand...
Click to collapse
Curious. How do you have it insured?
jimtim1980 said:
Curious. How subtly have it insured?
Click to expand...
Click to collapse
Worth Ave Group. Always have had good experiences with them; they've never done me wrong, and they cover accidental damage.
bigcc32 said:
Worth Ave Group. Always have had good experiences with them; they've never done me wrong, and they cover accidental damage.
Click to expand...
Click to collapse
I'll have to check that out for sure. I have never dropped a phone before but who knows. "knock on wood".
I found some pretty cool phone cases on eBay and one on Amazon. Hopefully they'll get here within the next few weeks.
Look at this on eBay http://www.ebay.com/itm/182363332970
Look at this on eBay http://www.ebay.com/itm/252650190591
Look at this on eBay http://www.ebay.com/itm/291963429459
Xiaomi Mi Mix Case, TopAce Slim Robot Armor Stand Shockproof Hybrid Rugged Rubber Hard back Case For Xiaomi Mi Mix (Silver) https://www.amazon.com/dp/B01N780PB2/ref=cm_sw_r_cp_apa_HLjvybQN0KHJ6
jimtim1980 said:
I'll have to check that out for sure. I have never dropped a phone before but who knows. "knock on wood".
I found some pretty cool phone cases on eBay and one on Amazon. Hopefully they'll get here within the next few weeks.
Look at this on eBay http://www.ebay.com/itm/182363332970
Look at this on eBay http://www.ebay.com/itm/252650190591
Look at this on eBay http://www.ebay.com/itm/291963429459
Xiaomi Mi Mix Case, TopAce Slim Robot Armor Stand Shockproof Hybrid Rugged Rubber Hard back Case For Xiaomi Mi Mix (Silver) https://www.amazon.com/dp/B01N780PB2/ref=cm_sw_r_cp_apa_HLjvybQN0KHJ6
Click to expand...
Click to collapse
The last eBay link you posted is interesting as it does have what looks like extra corner protection. Might grab me one of those.
darveniza said:
I Used Ali Express to purchase cases and screen protectors from China. You can download app from Play Store
Click to expand...
Click to collapse
How long did they take to get to you? Did you order them to be shipped to the US?
---------- Post added at 04:30 PM ---------- Previous post was at 04:28 PM ----------
psygnosi said:
I have the mi mix pro version and using this glass screen protector. http://www.ebay.com/itm/142182915322
Perfect fit but has the rainbow effect on the middle of the screen. It looks like it disappears as time goes on though. It's edge to edge no halo.
Click to expand...
Click to collapse
My phone came with this case on it when i purchased it. Do you have a grid of little dots across the entire screen?
Yes it does. You notice it when screen is off.
Sent from my MIX using Tapatalk
Ali Express shipping to USA take around 2 weeks
bigcc32 said:
They haven't arrived yet, but I will post a review as soon as they do.
Click to expand...
Click to collapse
Have they arrived yet? Are they any good? Looking for screen protectors myself, but cant be arsed fluffing around with crappy ones.
Anyone find a good tempered glass protector?
I bought this a day ago, should get here tomorrow. will let you know. I didn't want to wait for the 2 weeks to get to the US
https://www.amazon.com/gp/product/B01MQLV04B/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Thorin78 said:
I bought this a day ago, should get here tomorrow. will let you know. I didn't want to wait for the 2 weeks to get to the US
https://www.amazon.com/gp/product/B01MQLV04B/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just installed this Screen protector and I have to admit that it fits very nicely. No air Bubbles or anything.
Unfortuanely, i can confirm the amazon Reviews, that the Touch responsveness is pretty bad
syther said:
I just installed this Screen protector and I have to admit that it fits very nicely. No air Bubbles or anything.
Unfortuanely, i can confirm the amazon Reviews, that the Touch responsveness is pretty bad
Click to expand...
Click to collapse
Thanks. Looks like it'll be a return to amazon then. Maybe I'll go back to film instead of glass. I saw one on ebay for $3.
does it fit even w/ the case on?
I wonder which original case from Oneplus will be the best for Oneplus 6?
I never had Oneplus phone and I don't know this cases.
Could You explain me difference between Bumber Case and Protective Case?
I think about carbon. I would like to choose case that will the best protector for my phone. This is the most important for me. I consider only original cases. I will buy original screen protector too.
From specification I see that Bumber Case is heavier 25g vs 11g. So I think that will be better
I've owned both the OnePlus 3 and the OnePlus 5. In my experience, the bumpers are no more then just fancy shells for the phone that don't exactly feel like the offer that much protection to the phone, and I ended up buying Tudia full body cases for both phones. If you want a OnePlus case though, go with the Silicone one - had that for my OP5 and I loved it honestly. However, I feel that OnePlus cases are more crafted for their style than they are for the protection they offer (which is quite depressing, as the Sandstone cases felt so nice to hold in your hand), so you might want to consider looking elsewhere for a case.
As for screen protectors, the tempered glass ones by OnePlus themselves are usually the best, but a lot of cases don't work with them (including the Otter Box case offered by OnePlus). Third party TGSPs are cheaper, but they aren't 3D and often let dust slip in underneath. I ended up slapping a OnePlus TGSP onto my OP3 and then adding a Tudia full body case with a built in screen protector, and that thing survived so much abuse (and is still kicking actually).
I actually had the Carbon case with a OP tempered glass screen protector on my OP5, and the case did nothing to absorb the impact from a fall at work and shattered the glass. The case was nothing more than a hard plastic shell honestly.
But that's just my two cents
I'm gonna wait for third parties first. Till then a poach is the way for me.
Gramzz said:
I wonder which original case from Oneplus will be the best for Oneplus 6?
Click to expand...
Click to collapse
Get the OnePlus carbon bumper, top quality made by EVUTEC. The bumper case protects more. The normal case does not protect the top, bottom and buttons that well.
@Ph0enix_216
Thank you for your wide useful opinion.
Do somebody know will be spigen neo hybrid for Oneplus 6?
I used this case for note 3 and was great as a protective case.
Saved few times my phone.
I think I will buy original case during buying phone because free shipping is from 100 euro so it's better to buy with phone.
But if spigen will be good I will buy too
Would love to get the iron man case from the avengers edition
tbalden said:
I'm gonna wait for third parties first. Till then a poach is the way for me.
Click to expand...
Click to collapse
Looks like the 3rd parties have already gotten started! Just had a look now for mine, and seems like Orzly already have a few up on amazon.
Some are on pre-order but others seem to already be in stock already. (unbelievable how quick some of these 3rd parties are getting organized these days).
The phone's barely been announced!
Anyways, here are the ones I've found from them:
Their version of the silicone (I think they call theirs a FlexiCase)
https://www.amazon.com/dp/B07D3Y8WPP/&keywords=OnePlus+6+case
Their version of the bumper (they call theirs a Fusion Bumper as it has a clear back so you can see the phone whilst still having the decent protective rim in an actual color)
https://www.amazon.com/dp/B07D4MDMD1/&keywords=OnePlus+6+case
The Wallet Case (this is the type that I normally get, so I can use the built in stand for watching videos on my phone)
https://www.amazon.com/dp/B07D3Y246N/&keywords=OnePlus+6+wallet+case
The Lux Case (this style I've not seen before).. Looks like it does the credit card storage thing, but is more of a leather back than the full wallet. (I kinda never use the credit card storage anyway, so it's like they removed the bit I actually use (ie the stand), but kept the bit I don't use (the credit card bit!) haha. Would probably be useful for carrying rail cards though.
http://www.amazon.com/dp/B07D4P3BGQ/&keywords=OnePlus+6+leather+Case
I normally get my glass screen protectors from them, as they're usually a better fit for the OnePlus phones, but I can't seem to find them yet. But if anybody spots them, let me know.
Like Orzly bumper one. so far looks best solution as I don't see transparent original case yet.
Am Gonna pre-order that case and be happy
Sent from my HTC U11 using Tapatalk
Gramzz said:
@Ph0enix_216
Thank you for your wide useful opinion.
Do somebody know will be spigen neo hybrid for Oneplus 6?
I used this case for note 3 and was great as a protective case.
Saved few times my phone.
I think I will buy original case during buying phone because free shipping is from 100 euro so it's better to buy with phone.
But if spigen will be good I will buy too
Click to expand...
Click to collapse
You might as well go for a OnePlus case if you're grabbing the phone anyway. You can usually get it cheaper I'd you buy it bundled with a screen protector or something, too.
Spigen typically does make cases for OnePlus devices, but if I remember correctly, they took *forever* to release one for the OnePlus 5. I don't remember seeing one for sale until at least six months after the OP5 launched.
I like the looks of nylon case, and expect it to feel great in hand , if I go by reviews. It also offers decent protection and is the most unique OnePlus case this year IMO
ayush000 said:
I like the looks of nylon case, and expect it to feel great in hand , if I go by reviews. It also offers decent protection and is the most unique OnePlus case this year IMO
Click to expand...
Click to collapse
It looks like they actually offer some decent protection this year too — they cover all edges of the phone, whereas previous cases tended to leave the top and bottom edges exposed.
tbalden said:
I'm gonna wait for third parties first. Till then a poach is the way for me.
Click to expand...
Click to collapse
Are you going to bring your HTC kernel skills to the OnePlus 6 ?
SlyUK said:
Are you going to bring your HTC kernel skills to the OnePlus 6 ?
Click to expand...
Click to collapse
Yeah, I plan to widen my support this year to at least two devices with Qualcomm.
HTC u12+ and oneplus 6 are the chosen ones to mess with some kernel stuff as usual
Sent from my HTC U11 using Tapatalk
tbalden said:
Yeah, I plan to widen my support this year to at least two devices with Qualcomm.
HTC u12+ and oneplus 6 are the chosen ones to mess with some kernel stuff as usual
Sent from my HTC U11 using Tapatalk
Click to expand...
Click to collapse
Both very interesting devices. I will either get:
Oneplus 6 or 6T
HTC U12+
Essential Phone 2
It will be interesting. Currently leaning towards Oneplus 6.
Gramzz said:
@Ph0enix_216
Thank you for your wide useful opinion.
Do somebody know will be spigen neo hybrid for Oneplus 6?
I used this case for note 3 and was great as a protective case.
Saved few times my phone.
I think I will buy original case during buying phone because free shipping is from 100 euro so it's better to buy with phone.
But if spigen will be good I will buy too
Click to expand...
Click to collapse
I suspect they will, they've supported most OP devices recently!
ayush000 said:
I like the looks of nylon case, and expect it to feel great in hand , if I go by reviews. It also offers decent protection and is the most unique OnePlus case this year IMO
Click to expand...
Click to collapse
I agree the nylon case is stunning. But don't forget to factor in it is PC+TPU case while the Carbon Fiber is only a TPU case. But because of this, the Nylon case is 58.5% thinker and 28% heavier than the Carbon Fiber one. Now we are talking about millimeters and grams, so they aren't going to be drastically different, but it swayed me.
Nylon. It has a soft touch lining and that rugged shell - also full coverage. Looks nice too.
I got my 6 a day early and also got the nylon case. Very, very cool.
I ordered carbon Bumber Case. I think carbon will be better, more durable material thank nylon one.
In case of drop for example
Bigs1985 said:
I got my 6 a day early and also got the nylon case. Very, very cool.
Click to expand...
Click to collapse
To anybody who got the nylon case, how is it?
Is it really thick and bulky, or do you think it's nice? I don't want something like those old OtterBox cases that everybody had which would turn a phone into a brick haha
As said by the title, could you list the cases here thick enough that would hide the camera bump enabling the phone to lie flat on the back.
Both cheap and expensive ones are welcome.
ILA said:
As said by the title, could you list the cases here thick enough that would hide the camera bump enabling the phone to lie flat on the back.
Both cheap and expensive ones are welcome.
Click to expand...
Click to collapse
I bought this one.
It's a decent case that fits nicely with a glass protector on as well.
Xiaomi Mi A2 Hülle, Mi 6X Hülle, iBetter Carbon Fiber Tasche Silikon Hülle Flexibel Anti-Scratch TPU Cover Case Handyhülle Hüllen für Xiaomi Mi https://www.amazon.de/dp/B07BS8JNJC/ref=cm_sw_r_cp_apap_nchI7FKrSVMPl
I bought this one, looks nice cheap enough, however as my phone has not arrived i cant official state if the case looks as it does on Amazon
https://www.amazon.co.uk/gp/product/B07CYXGHLJ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
daveparki said:
I bought this one, looks nice cheap enough, however as my phone has not arrived i cant official state if the case looks as it does on Amazon
https://www.amazon.co.uk/gp/product/B07CYXGHLJ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
That's the one I have, in black. It really gets smudgy from oil on fingers pretty easily, but I still like it. Have cleaned it a couple times with rubbing alcohol and it seems to be holding up.
It's very thin and it stays on well. Doesn't hide the Cam bump completely, pretty close.
arkedk said:
I bought this one.
It's a decent case that fits nicely with a glass protector on as well.
Xiaomi Mi A2 Hülle, Mi 6X Hülle, iBetter Carbon Fiber Tasche Silikon Hülle Flexibel Anti-Scratch TPU Cover Case Handyhülle Hüllen für Xiaomi Mi https://www.amazon.de/dp/B07BS8JNJC/ref=cm_sw_r_cp_apap_nchI7FKrSVMPl
Click to expand...
Click to collapse
Yeah, I was looking at that one locally, but I'm not completely sold on the color since the phone is black and the case is blue, but since it's like €5, I'm willing to make a compromise for a short while. There is also a red and a gray version so I maybe opt for one of those.
daveparki said:
I bought this one, looks nice cheap enough, however as my phone has not arrived i cant official state if the case looks as it does on Amazon
https://www.amazon.co.uk/gp/product/B07CYXGHLJ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Looks nice, but it says that it has a 0.3mm bump so I'll pass. Even tho that's a pretty small bump I want it completely flat.
ILA said:
Yeah, I was looking at that one locally, but I'm not completely sold on the color since the phone is black and the case is blue, but since it's like €5, I'm willing to make a compromise for a short while. There is also a red and a gray version so I maybe opt for one of those.
Click to expand...
Click to collapse
The review says that the camera still isn't covered completely so you might pass on this as well.
arkedk said:
I bought this one.
It's a decent case that fits nicely with a glass protector on as well.
Xiaomi Mi A2 Hülle, Mi 6X Hülle, iBetter Carbon Fiber Tasche Silikon Hülle Flexibel Anti-Scratch TPU Cover Case Handyhülle Hüllen für Xiaomi Mi
Click to expand...
Click to collapse
I think I bought the same case you have, but from Aliexpress. If you want to look for it, search "Mi A2 Carbon Cover" and you'll find it.I bought mine from the store "Shop3983011 Store".
It's cheaper there but it takes way more to arrive, however I don't mind waiting.
Anyone have any luck finding "decent" cases for this thing?
Same here! If you find one that's available for Canada (shipped or otherwise), I'm game.
Unfortunately until ZTE officially announces North America release of the Axon 10 Pro, then i'm afraid we're out of luck for quality cases made by known 3rd party companies.
Almost nothing here .
I was looking for one as well...i only found ones where you stick your phone to the case with some kind of adhesive sticker and i don't feel like i want that. Doesn't sound secure to me. Probably is, but eh, give me something that actually encases the phone.
I'm afraid to take my new phone out in public for the very reason of not being able to find a good case right now.
Read somewhere that a P30 Pro case may be a close fit for the Axon 10.... May order a cheap silicone case from eBay as an experiment.
We'll have to wait and see, then we'll have a 100% match.
Well, my experiment had mixed results. The generic Chinese tpu case I bought does fit my 10 Pro. It did require some minor modifications in order to make the volume rocker and power buttons operate properly. Had to make some small incisions with a razor blade. The case fits the frame very well overall. The camera and flash cut outs aren't exactly a match, but the cut outs don't interfere with their functioning. I only spent a few dollars on the case, so I didn't mind making the adjustment. It works, but it ain't what I'd call pretty...
AliExpress have a few, not the best looking one. I ordered another silicone case that offer more protection for camera.
Sent from my ZTE A2020U Pro using Tapatalk
still no luck on a case for this thing. it just sits on flat surfaces or in my pocket.
aliexpress.com/wholesale?catId=0&initiative_id=SB_20191113154156&SearchText=phone+cases+for+axon+10+pro
Not an otterbox, but..
Amazon has one that i just got yesterday. Fits fine and covers the camera bump and the curved edges of the screen.
https://smile.amazon.com/gp/product/B07Y86B1H5/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Still cannot believe a decent more rugged 2 piece case hasn't been made yet.
Still no case as of July 3rd 2020
ZTE Axon 10 Cases
Denric said:
Still no case as of July 3rd 2020
Click to expand...
Click to collapse
As of August 10, 2020 still no decent hard case to truly protect the Axon 10 Pro from drops. There a cheapo silicone soft cases to protect against scratches to the back but that WILL NOT protect you one bit from a drop on a hard surface. The only thing that I've been able to find are the fold open "portfolio" cases...I believe that would provide some protection against drops. I may order one of these cheap folding portfolio cases.
I also found a clamshell glass case on AliExpress (sorry I can't post the link because I'm a NEWBIE here..argh) with metal bumpers all around the sides that may provide some protection but I'm assuming once you dropped you phone with one of these cases the case would shatter and you'd have to replace it...and at $20 each that could get expensive. But IF it worked I guess it's cheaper than replacing your phone screen or backing.
I don't understand why no one in China has produced a hard two piece case for the ZTE axon 10 Pro phone...Maybe even China is shunning ZTE at this point. WTH
If anyone comes across a good hard case let us know.
Cheers,
Jet
Cases !
I do use an Otterbox Symmetry clear Huawei P30pro case, not perfect but safe. Combined with LK screen protector for P30 pro.
cheers, Tom
Thx..$50...yikes!
Thomas_Velte said:
I do use an Otterbox Symmetry clear Huawei P30pro case, not perfect but safe. Combined with LK screen protector for P30 pro.
cheers, Tom
Click to expand...
Click to collapse
Tom, thanks for the suggestion...but very pricey at $50. It better be bullet proof or made of titanium at that price.
Cheers
JetAMartin said:
Tom, thanks for the suggestion...but very pricey at $50. It better be bullet proof or made of titanium at that price.
Click to expand...
Click to collapse
Hhmm, yes, I do not remember the original price, paid 9.99 Euro per warehouse deal.
Ain't bulletproof for sure, but has some kind of unicorn flair with all the glittering ´
cheers, Tom
Hi everyone,
This case looks great, but i can't find on aliexpress or in EU online store which shipping to Turkey, is there anyone using this case
https://www.bhphotovideo.com/c/product/1517049-REG/zte_a10pcas1_case_for_axon_10.html
At 9.99 Euro that's not bad but at $49.99USD....
Thomas_Velte said:
Hhmm, yes, I do not remember the original price, paid 9.99 Euro per warehouse deal.
Ain't bulletproof for sure, but has some kind of unicorn flair with all the glittering ´
cheers, Tom
Click to expand...
Click to collapse
Looks like it's gone up by $40.00 since you purchased it. That glittering better be real gold or titanium flakes at that price.
Cheers
Post up your purchased cases and links photos etc here
I like this
https://latercase.com/products/oneplus-8-pro-thin-case
Waiting for this one:
https://a.aliexpress.com/_d8IHYyE
Anyone familiar with xundd cases? The also make some for other OnePlus phone's.
Will post a photo when I have the case.
Nekromantik said:
I like this
https://latercase.com/products/oneplus-8-pro-thin-case
Click to expand...
Click to collapse
do you know if popsocket adhesive glues well onto those cases?
masri1987 said:
do you know if popsocket adhesive glues well onto those cases?
Click to expand...
Click to collapse
no idea never had one
No great cases for the pro model.
worldsoutro said:
No great cases for the pro model.
Click to expand...
Click to collapse
UAG has the plasma series in stock for both.
Ordered the pro version a couple days ago. Hasn't shipped yet though.
bigrigludwig said:
UAG has the plasma series in stock for both.
Ordered the pro version a couple days ago. Hasn't shipped yet though.
Click to expand...
Click to collapse
I ordered the Blindbox in Germany so I got delivered the sandstone and sandstone case additionally. They are quite hard and not really flimsy. However it's true, camera protection is barely there and I don't think those cases will protect from a drop really good. Also, I want to rock a transparent case with this beautiful blue color. The included one looks and feels really good but is way to soft at the sides, this is even lesser protection than the others cases.
Currently I am using the sandstone case as it gives me way better grip than the carbon one.
I have ordered this case. Let's see how it handles once it gets here: https://www.amazon.de/dp/B085DTHLSZ/ref=cm_sw_r_other_apa_i_hsUMEb0JFJSHQ
Got this.Its the original...but cheeper
https://de.aliexpress.com/item/32953651237.html?spm=a2g0s.9042311.0.0.7b304c4dX0IYSd
also nice:
https://de.aliexpress.com/item/4000927711260.html?spm=a2g0s.9042311.0.0.7b304c4dX0IYSd
I love that thing.
https://dbrand.com/shop/special-edition/teardown
What do you think about it?
Envoyé de mon VOG-L29 en utilisant Tapatalk
https://www.ebay.com/vod/FetchOrderDetails?itemId=324108711532&transactionId=2174225841011
I drop my phones about once per year so I need a case to protect my phones but a simple bumper case is not enough with these curved displays and depending on how the phone lands, screen might shatter even with a good bumper.case. The cover cases also prevent damage from typical day to day usage.
I have seen some really good implementation of always on displays with smart cover cases, especially from Samsung.
I cannot recommend the case I linked, I don't have it yet and I do not expect much from the case, it just happens to be one for sale now, I think beat cases typically don't get released this early. If anyone sees a good cover case, please post here, also if you see always on screen mods for the phone.
I've ordered it! It looks good but won't ship until next month!
i hope otterbox makes a pop socket symmetry case for this
I've ordered 1 of these for the missus.
I will wait for Spigen or Ringke cases etc
nathlynn22 said:
I've ordered 1 of these for the missus.
I will wait for Spigen or Ringke cases etc
Click to expand...
Click to collapse
You probably wont get it for a long while unless you paid through the roof for DHL or UPS!
Im gonna have to take extra care and not drop it until I can get a cheap case from amazon while I wait for Spigen or Rhinoshield.
Nekromantik said:
You probably wont get it for a long while unless you paid through the roof for DHL or UPS!
Im gonna have to take extra care and not drop it until I can get a cheap case from amazon while I wait for Spigen or Rhinoshield.
Click to expand...
Click to collapse
I used ali express. My screen protectors should be here by the last week of april while I wait for whitestone to sort theres out. I'll just use the case in the ox while I wait aswell
Olixer cases should be in stock next month on MobileFun.
I like these https://interiorexofficial.com/collections/oneplus , I got it on my Google Pixel 3. You can add logo's
Nekromantik said:
You probably wont get it for a long while unless you paid through the roof for DHL or UPS!
Im gonna have to take extra care and not drop it until I can get a cheap case from amazon while I wait for Spigen or Rhinoshield.
Click to expand...
Click to collapse
God I hope not. I ordered like 100 worth of cases and screen protectors.
masri1987 said:
do you know if popsocket adhesive glues well onto those cases?
Click to expand...
Click to collapse
Had a popsocket for half a year. I liked it. I was reading web books. I did not trust it staying put . . . so . . . . I dabbed a tiny, tiny little bit of super glue at the edges.
.
.
.
Nice grippy side is 'critical' for me.