.
.
.
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM when it comes to hardware, drivers and some features.
With the rebrand of CM to LineageOS (LAOS) we are now actually LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or LAOS team, if it concerns their code base. This rom isn't LAOS supported, so no need to report errors or bugs to them!!
.
.
.
.
.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
maxwen
DU team
SlimRoms team
Resurrection Remix team
OmniRom team
Community
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
.
.
.
We are now paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 12.1
Download link: afh
Full Changelog link: goo.gl/ZrR9Vh
Google Apps:
Beans gapps
Or
Open GApps (ARM or ARM64 7.1 pico or nano, depending on your phone's architecture)
You tell...
The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it, and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
How to flash:
Again: Don't do it if you don't know it!
Download the ROM and GApps and transfer them to your device
Boot to recovery (TWRP recommended)
Wipe system, Cache, data and ART/Dalvik cache
Flash ROM Zipfile
Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
Optional: If you are on lollipop bootloader and get a bootloop or wanna use encryption update your firmware from twrp: https://www.androidfilehost.com/?fid=673368273298980128
Flash/Install the root solution of choice (optional)
Reboot to system
ROM supports both, lollipop and nougat, bootloaders.
After successfully downloading, updates are stored under AICP-OTA directory in Internal Memory. After flashing the update you need to flash this kernel and then flash the latest Magisk framework.
Read this: G+ Notice
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)!
Supported root solutions:
Magisk v13(remember that v12 needs the Manager to be installed separately from XDA thread)
Magisk V13 includes Magisk Manager
SuperSU (Use whatever works for you, stable or beta):
SuperSU - stable and beta available (Site by CCMT that took over the the marketing from chainfire)
SuperSU - direct download link for the latest SuperSU directly from the dev (chainfire)
Lineage SU-addon (check your needed version: 14.1 arm or arm64) -> the removal zip is available here too.
KERNEL:
Kernel in this ROM follows LAOS source with custom additions.
PREREQUISITE FOR OTA:
To be able to flash using the buildin OTA app that needs TWRP recovery installed to work.
You can still use CWM/LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. Zip gets saved in the "AICP_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery.
If you want to contribute to the AICP or wanna see what is being worked on/merged, feel free to visit our Gerrit review system. (Link is at the bottom!!!)
IceColdJelly AICP G+ community
Kernel:
ROM & Additional links:
Gerrit Code Review
Github
ROM OS Version: 7.x Nougat
ROM Kernel: Linux x
Version Information
Status: Stable
You want to see a normal night at the "DEV office", click here!!
XDA:DevDB Information
AICP 12.1, ROM for the Xiaomi Mi 4C
Contributors
Cozzmy13, csolanol
Source Code: https://github.com/AICP
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: AOKP and LAOS
Version Information
Status: Nightly
Created 2017-03-03
Last Updated 2018-04-10
Excuse me. When will you move to Naugat Bootloader? Thanks for your great work!
What's the difference between r2 and stable?
Sent from my Mi 4c using Tapatalk
Rhyn said:
What's the difference between r2 and stable?
Sent from my Mi 4c using Tapatalk
Click to expand...
Click to collapse
r2 will be used with a different device repo which has nougat blobs.
Ippfcox said:
Excuse me. When will you move to Naugat Bootloader? Thanks for your great work!
Click to expand...
Click to collapse
It's on our priority list.
Cozzmy13 said:
It's on our priority list.
Click to expand...
Click to collapse
Is it? [emoji12]
csolanol said:
Is it? [emoji12]
Click to expand...
Click to collapse
It is. At the end of it, but it's there.
Is there a recommended way to update? Other than dirty flashing new versions?
im confused in what kernel should i choose,is someone have a direct link ?
im getting crashes in gamings ,
Can I ask you a question? what is the difference with the nougat and the actual bootloader
Inviato dal mio Mi 4c utilizzando Tapatalk
i've updated my aicp version from 0227 to 0302 and it fix system freeze problem that i've got on build 0227. But there's something that doesn't work for me. It is wifi. On build 0227 i've connect to my wifi without any problem, but on 0302 build, it always 'obtaining ip address'.
Anyway, thanks for the great work.
*edit: nvm, wifi problem is fix
nasoduko said:
im confused in what kernel should i choose,is someone have a direct link ?
im getting crashes in gamings ,
Click to expand...
Click to collapse
You don't have any choice. Just flash the ROM. Give us logcat from the crash. Make sure you are using the latest version.
foxrobi said:
Can I ask you a question? what is the difference with the nougat and the actual bootloader
Inviato dal mio Mi 4c utilizzando Tapatalk
Click to expand...
Click to collapse
Nougat uses device tree appended to the kernel. Device tree contains hardware specific configuration.
The device tree can only be appended to a gziped kernel. Gzip is a compression algorithm. It seems like the lollipop bootloader doesn't support gzip compression. Either that or we couldn't get it working.
Moving to nougat bootloader is useless for custom ROMs, since we don't need to use it for the ROM to work.
AceStroke said:
Is there a recommended way to update? Other than dirty flashing new versions?
Click to expand...
Click to collapse
That's the recommended way.
Cozzmy13 said:
Nougat uses device tree appended to the kernel. Device tree contains hardware specific configuration.
The device tree can only be appended to a gziped kernel. Gzip is a compression algorithm. It seems like the lollipop bootloader doesn't support gzip compression. Either that or we couldn't get it working.
Moving to nougat bootloader is useless for custom ROMs, since we don't need to use it for the ROM to work.
Click to expand...
Click to collapse
All right, now I know about this... In order to use AICP, how can I get back to lollipop Bootloader? Is there flashable firmware available? I don't want to get back to miui any more...
Ippfcox said:
All right, now I know about this... In order to use AICP, how can I get back to lollipop Bootloader? Is there flashable firmware available? I don't want to get back to miui any more...
Click to expand...
Click to collapse
You need to flash the version of MIUI which can be unlocked from fastboot.
https://forum.xda-developers.com/mi-4c/general/guide-unlocking-mi4c-bl-verification-t3336779
It will downgrade everything.
Then you can root, install TWRP and flash a custom ROM.
Cozzmy13 said:
You need to flash the version of MIUI which can be unlocked from fastboot.
https://forum.xda-developers.com/mi-4c/general/guide-unlocking-mi4c-bl-verification-t3336779
It will downgrade everything.
Then you can root, install TWRP and flash a custom ROM.
Click to expand...
Click to collapse
Thanks for your patient explanation! =)
On the latest 3 builds or so i'm getting partial freezing and then rebooting in different music players. Its happening when i'm changing songs and it's random. Log attached.
I'm updating via OTA, should i try clean install ???
Why is the charging speed very slow?
farchanrifai said:
Why is the charging speed very slow?
Click to expand...
Click to collapse
It's faster than any other Rom while using the fast charger
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM when it comes to hardware, drivers and some features.
With the rebrand of CM to LineageOS (LAOS) we are now actually LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors or bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 12.1
Download link: http://dwnld.aicp-rom.com/?device=land
Full Changelog link: http://dwnld.aicp-rom.com/?device=land
Google Apps:
Beans gapps
Or
Open GApps (ARM or ARM64 7.1 pico or nano, depending on your phone's architecture)
You tell...
FAQ:]
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see, if your device is build on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them (as long as they are LOS based), but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm for SDK 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe System, Cache and ART/Dalvik cache. Flash the ROM, your preferred root solution and reboot. Or you might just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. Boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again if you don't want to loose root, and then reboot.
A2. LOS based kernels sometimes come as a flashable ZIP file too. You can flash them together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue, if you don't want to loose root. Now swipe to flash, clear Cache & ART/Dalvik cache and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Settings -> Navigation -> Enable navigation bar. The bar can be configured separately in its settings.
Q I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A In TWRP, flash the substratum rescue zip in the substratum folder on the internal storage.
Q I keep losing root with Magisk, how do I fix it?
A Check this out, if that doesn't work for you ask for help in this thread, read or ask in the Magisk thread on XDA or just flash Magisk again!
Q I'm having issues with WhatsApp, how do I fix it?
A Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the root section in the AICP Extras menu.
The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device
2. Boot to recovery (TWRP recommended)
3. Wipe system, Cache, data and ART/Dalvik cache
4. Flash ROM Zipfile
5. Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
6. Flash/Install the root solution of choice (optional)
7. Reboot to system
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)!
Supported root solutions:Magisk v13.x
SuperSU - stable and beta available (Site by CCMT that took over the the marketing from chainfire)
SuperSU - direct download link for the latest SuperSU directly from the dev (chainfire)
Lineage SU-addon (check your needed version: 14.1 arm or arm64) -> the removal zip is available here too.
KERNEL:
The kernel in this ROM follows LAOS source with custom additions from AOSP.
PREREQUISITE FOR OTA:To be able to flash using the buildin OTA app that needs TWRP recovery installed to work.
You can still use LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. Zip gets saved in the "AICP_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery.
If you want to contribute to the AICP or wanna see what is being worked on/merged, feel free to visit our Gerrit review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/aicp/kernel_xiaomi_msm8937
ROM & Additional links:
Gerrit Code Review
Github
IceColdJelly AICP G+ community
Contributors
@zwliew
@darshan1205
and every user
You want to see a normal night at the "DEV office", click here!!
XDA:DevDB Information
Aicp Nougat For Redmi 3S/Plus, ROM for the Xiaomi Redmi 3S
Contributors
chaubeyprateek, karthick mostwanted
Source Code: https://github.com/AICP/kernel_xiaomi_msm8937
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LOS
Version Information
Status: Nightly
Current Stable Version: 1
Stable Release Date: 2017-12-27
Created 2017-03-20
Last Updated 2018-01-01
Reserved
Seriously means land is going to be green land
Nice to see such a development now...
Thanks for the rom...
it's fingerprint working?
nafeesdipta said:
it's fingerprint working?
Click to expand...
Click to collapse
Check Screenshots
Upgrading to N without Xposed is tasteless as of now
But thats osm that we have N for Redmi 3s.
Cheers. rovo89 is developing xposed for N:fingers-crossed:
MIUI-MODS said:
Upgrading to N without Xposed is tasteless as of now
But thats osm that we have N for Redmi 3s.
Cheers. rovo89 is developing xposed for N:fingers-crossed:
Click to expand...
Click to collapse
the only tasteless thing for our phone is miui
no offense but can you really use it without throwing out every 5 minutes?
Miui 8 + Root(Xposed +Miui Tweaks) beats most of the combination. :cyclops:
Minor bugs than of Lineage, etc.
Thanks, great work.
It has oms substratum ?????
Why is the post doubled?
alexanderp39 said:
Why is the post doubled?
Click to expand...
Click to collapse
It's not doubled.It is nougat AICP.
Avik423 said:
It's not doubled.It is nougat AICP.
Click to expand...
Click to collapse
Oh no. I meant the content of the post is doubled. The OP introduce about AICP twice and give you the download link 3 times.
Another Noughat for land.. Yeah..
Thank for such great work. Will try it..
I cant find any fingerprint option in 3-21 build. can anybody help me?
I cannot find fingerprint option in 21-3 build
nafeesdipta said:
I cant find any fingerprint option in 3-21 build. can anybody help me?
Click to expand...
Click to collapse
konoha.29 said:
I cannot find fingerprint option in 21-3 build
Click to expand...
Click to collapse
i dont know why its not included in newer version but you cant fix that on your own.
Good job
Sent from my Redmi 3X using Tapatalk
Nice , hope soon bugs will be fixed
@chaubeyprateek choud you send me Kernel source? I woud like to tune it a bit& make N version for soviet?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team @maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 13.1
See second post for downloads.
See 3rd post.
Google Apps:
(link the best one for your device, there are several variants out there right now, pico/nano gapps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Go to Aicp Extras/Navigation bar, and enable it.
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I keep losing root with Magisk, how do I fix it?
A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (Try RedWolf from here).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the deivce, some devices need you to flash it every time.
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
Link
ROM & Additional links:
AICP Gerrit Code Review
AICP on Github
AICP G+ community
Credits:
AICP Team
LineageOS Team
TeamReloaded
@nichcream
You want to see a "normal" night at the "DEV office", click
here!!
XDA:DevDB Information
AICP, ROM for the Xiaomi Redmi 3S
Contributors
Devil7DK, nichcream, hridayhs, riteshsaxena
Source Code: https://github.com/AICP
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked Bootloader
Based On: LineageOS
Version Information
Status: Stable
Created 2018-02-28
Last Updated 2018-02-28
Downloads
ROM - Sourceforge.net
Gapps - Unoffcial OpenGapps
Changelog
20180228 - Intial Build. Sepolicy - Enforcing. Camera, Volte, Bluetooth, WiFi working. Thanks to @nichcream for fixing "Dark Video Recording" which is been a big drawback of custom roms in land.
20180308 - Added Volte Icon, UI Changes in Battery Settings, Excessive Drain Fixed, Excessive Heat Fixed (Wish so... ;_; )
Reserved for awesomeness
Wow.. Stable Tag on Initial build?
Very nice rom.
Very fast and smooth.
Thank you very much for developing.
Have some bugs:
1. FP Goodix not working.
2. Battery LED not working.
UPD: Logcat for FP View attachment logcat.zip
Can't seem to find the download link. Trying to get it via mobile. Haven't tested using PC . Ss attached
raf.lozano said:
Can't seem to find the download link. Trying to get it via mobile. Haven't tested using PC . Ss attached
Click to expand...
Click to collapse
Try this https://sourceforge.net/projects/te..._land_o-13.1-UNOFFICIAL-20180228.zip/download
i_love_linux said:
Try this https://sourceforge.net/projects/te..._land_o-13.1-UNOFFICIAL-20180228.zip/download
Click to expand...
Click to collapse
Ty sir!
raf.lozano said:
Can't seem to find the download link. Trying to get it via mobile. Haven't tested using PC . Ss attached
Click to expand...
Click to collapse
how is battrey
i_love_linux said:
Have some bugs:
1. FP Goodix not working.
Click to expand...
Click to collapse
Grab dmesg
firoj9 said:
how is battrey
Click to expand...
Click to collapse
Try for yourself... It's been hours since the release... How do you expect battery testing?
PS: sourceforge is kinda slow... But I've managed to download it about an hour ago. Will try and install today or tomorrow...
Thanks, Dev!
Devil7DK said:
Click to expand...
Click to collapse
https://sourceforge.net/projects/te..._land_o-13.1-UNOFFICIAL-20180228.zip/download
Sir,This link is working for me
abhishekpandey7148 said:
https://sourceforge.net/projects/te..._land_o-13.1-UNOFFICIAL-20180228.zip/download
Sir,This link is working for me
Click to expand...
Click to collapse
Yeah. I know. I just showed it doesn't showing in folder coz the server is static ;_;
Thanks a lot for your work!!
nichcream said:
Grab dmesg
Click to expand...
Click to collapse
dmesg output View attachment dmesg.txt.zip
Thanks so much sir this rom is better than all roms bcz I like no dark camrecording issue but pls fix battery change led
i_love_linux said:
dmesg output View attachment 4434127
Click to expand...
Click to collapse
Thanks, but the logs aren't complete. Please get a dmesg (not kmsg) either with Kernel Adiutor or with the terminal command: `dmesg > /sdcard/dmesg.txt`, right after booting..
firoj9 said:
how is battrey
Click to expand...
Click to collapse
From 82% to now, I must say it's not bad.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 13.1
Download link: AiCP-O 14-5-2018
Full Changelog link: http://dwnld.aicp-rom.com/
Google Apps:OpenGapps
Use 8.1 - Arm64 - Pico/nano.. etc
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Go to Aicp Extras/Navigation bar, and enable it.
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I keep losing root with Magisk, how do I fix it?
A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the deivce, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
KERNEL:
The kernel in this ROM follows LAOS source with custom additions.
PREREQUISITE FOR OTA:
To be able to flash using the built-in OTA app, TWRP recovery is needed.
You can still use the LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. The Zipfile gets saved in the "aicp_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source: https://github.com/Le-S2-Oreo/android_kernel_leeco_msm8976
ROM & Additional links:
AICP Gerrit Code Review
AICP on Github
AICP G+ community
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
AiCP for LeEco Le 2, ROM for the LeEco Le 2
Contributors
Rk585, Codeworkx
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Twrp
Version Information
Status: Stable
Created 2018-03-13
Last Updated 2018-05-17
Reserved
Reserved
Nice. Will give a try
Edit: Video review here
Good rom.
Great Job! very smooth and a lot of customization options to play with.
Rooted?
Egor4ik1337 said:
Rooted?
Click to expand...
Click to collapse
No, you need to root it if you want root access.
Rk585 said:
No, you need to root it if you want root access.
Click to expand...
Click to collapse
How i can got root access on ur rom?
Egor4ik1337 said:
How i can got root access on ur rom?
Click to expand...
Click to collapse
Flash MAGISK
Thanks
smoother than the other 8, but smoothness is still far away... Thanks Dev
A much awaited rom..thanks a lot :laugh:
VoLTE Did not work for Me
Hey Folks, I just installed AICP ROM after Pixel Experience, that was a stable ROM in my frank Opinion but as I switched here, VoLTE is completely gone. Be careful before you could install it. I Didn't work, might not be in your case but I highly suggest to Try Pixel Experience once before you could install any other Android 8.1 ROM.
If Possible, do fix this issue... Dev
Thanks
Great News!! This is the Rom I like more... when it will be Official?
Thank you for de great work @Rk585
Volte?
Sent from my X526 using Tapatalk
AyaAn724782 said:
Volte?
Sent from my X526 using Tapatalk
Click to expand...
Click to collapse
Ded. VoLTE hates me.
How Do I Manually Change The APN, Its automatic but has the wrong setting for Straight Talk. Thanks
Update: Found it was in the wrong setting lol:victory:
Update: MMS Messaging Pictures isn't working tried different apn's.. Restarts.. Ect no success
How to pass SafetyNet with this ROM ?
Magisk 16.0 it show SafetyNet API error
@Rk585, pls continue the project. Thus is a very good rom.
Pls provide us updates
tumonh said:
@Rk585, pls continue the project. Thus is a very good rom.
Pls provide us updates
Click to expand...
Click to collapse
Yes I'm going to. I was busy with exams and all
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Testing Build Version 13.1
Download link
Previous Testing Builds
Full Changelog link
Google Apps:
I recommend using Open GApps (Platform: ARM, Version: 8.1).
Other packages like MindTheGapps might work, but I haven't testet any of these.
Hardware key brightness control
VoLTE
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. This project is discontinued. So there will be no next build.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Go to Aicp Extras/Navigation bar, and enable it.
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I keep losing root with Magisk, how do I fix it?
A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)
Prerequisities:
Marshmallow Bootloader installed
TWRP >= 3.2.1-2 installed
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
KERNEL:
The kernel in this ROM follows LAOS source with custom additions.
PREREQUISITE FOR OTA:
To be able to flash using the built-in OTA app, TWRP recovery is needed.
You can still use the LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. The Zipfile gets saved in the "aicp_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/nr23730/kernel_samsung_exynos7580-common
Device tree:
https://github.com/nr23730/device_samsung_s5neoltexx
https://github.com/nr23730/device_samsung_exynos7580-common
To avoid soft reboots when trying to access location services you need to apply a patch to hardware/interfaces. As it's on the LinageOS Gerrit you can simply run this comand from the root of your workdir before building:
Code:
$ repopick 206140 -g https://review.lineageos.org -P hardware/interfaces/
ROM & Additional links:
AICP Gerrit Code Review
AICP on Github
AICP G+ community
Android Helping Group
Special thanks to:
Stricted, KMXSLR (they maintain the LineageOS tree for this device)
Whole Exynos7580 community
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
AICP 13.1 for s5neoltexx, ROM for the Samsung Galaxy S5 Neo
Contributors
nr23730
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader, TWRP >= 3.2.1-2
Based On: AICP, LineageOS
Version Information
Status: Testing
Created 2018-05-08
Last Updated 2018-08-12
Reserved
Reserved
Thank you
Hi, thanks for your work, I will approve it.:good:
Hey, any chance for some screenshots?
nanquan said:
Hey, any chance for some screenshots?
Click to expand...
Click to collapse
I try to add some tomorrow.
New build,
Changes:
Fixed hardware key illumination
Custom actions for hardware keys
Wake using home button
Download:
https://www.androidfilehost.com/?fid=674106145207485723
md5:
https://www.androidfilehost.com/?fid=674106145207485727
Changelog:
https://www.androidfilehost.com/?fid=962339331458991027
overheating
temperature keeps increasing as i use the phone, help
Microfone
The ROM is clean and fast, but i'm having a issue with the microfone... In videos and audios the mic is very low and a it seens little "vibrating". I don't know if it's only with me, but it's reported. ;D
George1337 said:
temperature keeps increasing as i use the phone, help
Click to expand...
Click to collapse
Can you try using the bioshock cpu covernor? I'm actually considering to set it as default governor for the next build.
nr23730 said:
Can you try using the bioshock cpu covernor? I'm actually considering to set it as default governor for the next build.
Click to expand...
Click to collapse
if you can tell me how... i'm kinda newb into custom roms
EDIT:: initially i installed pico open gapps for 8.1 and i think that was the problem. now i reinstalled the rom without gapps and the temperature is normal
Hi, thank you for your work! Just one question: has this rom atm the same mic bug of stricted laos rom?
jackstef said:
Hi, thank you for your work! Just one question: has this rom atm the same mic bug of stricted laos rom?
Click to expand...
Click to collapse
There mic bug has been fixed in los rom
Nice ROM thx for work. Really smooth one. I like it
Need volte ........... great work.....keep it up.....
How to install Marshmallow Bootloader?
paszkowsky said:
How to install Marshmallow Bootloader?
Click to expand...
Click to collapse
Install latest Marshmallow stock on phone and it will be enough
Animations are laggy.. like quick settings, opening closing animations and switching between apps animations are lagging......
Anyone got any screenshots they can share?
nanquan said:
Anyone got any screenshots they can share?
Click to expand...
Click to collapse
Here u r
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we are now LOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LOS team will if it concerns their code base. This rom isn't LOS supported, so no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
This ROM is heavily based on the works of @forkbomb444 and @tilaksidduram, Huge thanks to them
Thanks to @makorn645 for the kernel source
I would also like to thank:
LineageOS & CM (R.I.P.) team
The OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
Download link: http://www.mediafire.com/folder/cnu5mzuldjru4/AICP_N7100
Google Apps:
https://opengapps.org/
(version: 7.1, ARM, package of your choice, nano/pico recommended)
TWRP:
https://dl.twrp.me/t03g/
(Thanks to @Marc0601 for the latest one)
You tell...
The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it, and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
How to flash:
Again: Don't do it if you don't know it!
Download the ROM and GApps and transfer them to your device
Boot to recovery (TWRP recommended)
Wipe system, Cache, data and ART/Dalvik cache
Flash ROM Zipfile
Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
Flash/Install the root solution of choice (optional)
Reboot to system
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every ROM Update!
Currently Supported Root Solutions:
Magisk stable
KERNEL:
Kernel in this ROM follows @makorn645's retrokernel source with custom additions.
Kernel source:
https://github.com/makorn645/android_kernel_samsung_smdk4412
XDA:DevDB Information
AICP 12.1 N7.1.2 Unofficial, ROM for the Samsung Galaxy Note II
Contributors
@AndroX99
Source Code: https://github.com/aicp
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: TWRP
Based On: LineageOS
Version Information
Status: Unofficial
Created 2018-12-31
Last Updated2019-01-26
AndroX99 said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we are now LOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LOS team will if it concerns their code base. This rom isn't LOS supported, so no need to report errors/bugs to them!!
WARNING: Those who are on f2fs must flash retrokernel or your favourite custom kernel after flashing! Details at "Known Issues"
Feature list (rough Overview)
This ROM is heavily based on the works of @forkbomb444 and @tilaksidduram, Huge thanks to them
I would also like to thank:
LineageOS & CM (R.I.P.) team
The OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
Download link: https://mega.nz/#!UhUyFK7b
Google Apps:
https://opengapps.org/
(version: 7.1, ARM, package of your choice, nano/pico recommended)
TWRP:
https://dl.twrp.me/t03g/
(Thanks to @Marc0601 for the latest one)
Kernel is in extreme alpha stage. Any bugs of the ROM is most likely caused by the kernel. They'll be solved soon. I wanted to use retrokernel but I haven't received any reply from @makorn645 yet providing the permission
1. Kernel doesn't support f2fs yet. (Added to my todo list. Fix will be up soon, you can use @makorn645's retrokernel till then. Link: https://forum.xda-developers.com/attachment.php?attachmentid=4411193&d=1517912742
2. Kernel doesn't support adoptable storage. I'll probably fix it but it's not a priority. You can just use retrokernel or link2sd.
You tell...
The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it, and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
How to flash:
Again: Don't do it if you don't know it!
Download the ROM and GApps and transfer them to your device
Boot to recovery (TWRP recommended)
Wipe system, Cache, data and ART/Dalvik cache
Flash ROM Zipfile
Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
Flash/Install the root solution of choice (optional)
Reboot to system
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every ROM Update!
Currently Supported Root Solutions:
Magisk stable
KERNEL:
Kernel in this ROM follows LAOS source with custom additions.
Overclocking and many customizations are added. NEVER TOUCH THEM UNLESS YOU KNOW WHAT YOU ARE DOING. I'M NOT RESPONSIBLE FOR DEAD DEVICES DUE TO OVERCLOCKING TOO HIGH!
Kernel source:
https://github.com/LineageOS/android_kernel_samsung_smdk4412
XDA:DevDB Information
AICP 12.1 N7.1.2 Unofficial, ROM for the Samsung Galaxy Note II
Contributors
@AndroX99
Source Code:https://github.com/aicp
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: TWRP
Based On: LineageOS
Version Information
Status: Unofficial
Created 2018-12-31
Last Updated2018-12-31
Click to expand...
Click to collapse
Link isn't working
Hey, also you can use my stable kernel, it is based on @pascua28 Hybrid-Kernel
https://github.com/marc0601/stable_android_kernel_samsung_smdk4412
Use boeffla14 branch, it is fully stable, good luck
Marc0601 said:
Hey, also you can use my stable kernel, it is based on @pascua28 Hybrid-Kernel
https://github.com/marc0601/stable_android_kernel_samsung_smdk4412
Use boeffla14 branch, it is fully stable, good luck
Click to expand...
Click to collapse
How do I download it? Do I click on download as zip??
Sent from my SM-N910P using Tapatalk
Link not working please update it to mediafire
+1
Happy new years roms :laugh: :good:
Marc0601 said:
Hey, also you can use my stable kernel, it is based on @pascua28 Hybrid-Kernel
https://github.com/marc0601/stable_android_kernel_samsung_smdk4412
Use boeffla14 branch, it is fully stable, good luck
Click to expand...
Click to collapse
Thanks a lot. I'll take a look at it
ousamovic said:
Link not working please update it to mediafire
Click to expand...
Click to collapse
Mediafire provides 10 GB storage for free only. I'd still consider uploading new builds there too
janio said:
+1
Click to expand...
Click to collapse
Marc0601 said:
Link isn't working
Click to expand...
Click to collapse
Link updated. Forgot to include decryption key
does this rom mute the ringing or stop the alarm when u flip the phone same of crdroid ??
AbdAbd10 said:
does this rom mute the ringing or stop the alarm when u flip the phone same of crdroid ??
Click to expand...
Click to collapse
Yes
AndroX99 said:
Mediafire provides 10 GB storage for free only. I'd still consider uploading new builds there too
Link updated. Forgot to include decryption key
Click to expand...
Click to collapse
Thanks man ???
AndroX99 said:
Yes
Click to expand...
Click to collapse
thx for answering and i install the rom but I can't turn off the buttons light the settings are not doing anything when i change them
@AndroX99 use this:
https://github.com/ComicoTeam/andro...mmit/c2f91a6404e79e686fbb915c648dd12a9f3eacfb to fix the menu key remaping.
and this to change the recents to double tap home: https://github.com/ComicoTeam/andro...mmit/af4829b3dd7dae20ea5b034fa415420f21e80093
Thanks @AndroX99 .....Everything working great I m using Marc kernel which gives me best performance:fingers-crossed:
AbdAbd10 said:
thx for answering and i install the rom but I can't turn off the buttons and the notifications light the settings are not doing anything when i change them
Click to expand...
Click to collapse
A kernel issue probably. Please flash retrokernel and report back after trying to disable lights
ComicoX said:
@AndroX99 use this:
https://github.com/ComicoTeam/andro...mmit/c2f91a6404e79e686fbb915c648dd12a9f3eacfb to fix the menu key remaping.
and this to change the recents to double tap home: https://github.com/ComicoTeam/andro...mmit/af4829b3dd7dae20ea5b034fa415420f21e80093
Click to expand...
Click to collapse
They are already working
[email protected] said:
Thanks @AndroX99 .....Everything working great I m using Marc kernel which gives me best performance:fingers-crossed:
Click to expand...
Click to collapse
Thanks for reporting. I didn't get time to test it out. I will test his kernel and include it instead in next builds after trying (It'd definitely be better than this one since I made this in around 15 days. This was just an alternative )
Great work @AndroX99. AICP was one of the best nougat ROMs for our device until it became EOL. Can't wait to try this out
AndroX99 said:
Thanks for reporting. I didn't get time to test it out. I will test his kernel and include it instead in next builds after trying (It'd definitely be better than this one since I made this in around 15 days. This was just an alternative )
Click to expand...
Click to collapse
You can use my device tree too, it has some improvements and some new things, contact me on telegram marc0601