I Tried 3 Custom rom All Are installed And Not opens after the boot logo Waited above one hour Any one tell me to solve this
If you are installing android 4.2.x then first flash kernel 3.4 and then flash the ROM. When i flashed ROM for first time I was also getting bootloop but then I saw that i had a lower Kernel Version. So I flashed the suitable kernal and the flashed ROM. It wirked for me. You also try this step. And do make sure that you clear partition/cache/dalvik etc as required.
Thanks for the reply, My Phone Have the kernel version 3.4.5, And which version of ke
AnkeshPrasad said:
If you are installing android 4.2.x then first flash kernel 3.4 and then flash the ROM. When i flashed ROM for first time I was also getting bootloop but then I saw that i had a lower Kernel Version. So I flashed the suitable kernal and the flashed ROM. It wirked for me. You also try this step. And do make sure that you clear partition/cache/dalvik etc as required.
Click to expand...
Click to collapse
My Phone Have the kernel version 3.4.5, And which version of kernel i want to flash
Related
I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
kidstretch said:
I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
JeffDC said:
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
Click to expand...
Click to collapse
Yes I can, managed to install MIUI only, latest version.
I also installed Multirom again (on MIUI) and it downloaded cm11s kernel).
Ok managed to go back to my old miui os, now I have 2 miui os and no cm11, also downloaded the Franco kernel 30. How can i check if the cm11 that i had before is still there, if not how can i install it again without screwing my already working miui?
update:
After some tests, this is what's happening.
I believe I have no CM11S on my phone, that is gone!
I have the MIUI V5 running, but when i flash the franco kernel, the phone is stuck on boot (1+1 logo), i have to flash the kernel_kexec_bacon_cm11s to make it boot in MIUI (working).
So, now i have a working rom that works through Mutlirom and I cannot flash a working CM11S rom on the phone.
Any help would be great guys!
i am flashing the stock rom again and again even though i am not getting wifi(the wifi is not turning on) also the mobile hotspot......
please help me i am facing this problem since 2 months
my device: XT1033(Asia retail)
When flashing the stock ROM are you also reflashing the stock kernel that goes with that ROM version? If the ROM image doesn't have the right kernel modules for the boot.img you are running your WiFi will not work at all.
elrod16 said:
When flashing the stock ROM are you also reflashing the stock kernel that goes with that ROM version? If the ROM image doesn't have the right kernel modules for the boot.img you are running your WiFi will not work at all.
Click to expand...
Click to collapse
can u send me the links of the asian retail rom and kernel
urgent please....
Im about to flash dirty unicorns 5.0.2 . I already have twrp recovery and have downloaded the elementalx 2.08 kernel.. Do i have to install kernel in order to install the rom or everything will be fine with the stock lollipop kernel?
Usually the ROM is packed with the kernel that is compatible. So every ROM has it's 'default' kernel You can replace it with ElementalX afterwards though
GiwrgosP- said:
Im about to flash dirty unicorns 5.0.2 . I already have twrp recovery and have downloaded the elementalx 2.08 kernel.. Do i have to install kernel in order to install the rom or everything will be fine with the stock lollipop kernel?
Click to expand...
Click to collapse
This
experience7 said:
Usually the ROM is packed with the kernel that is compatible. So every ROM has it's 'default' kernel You can replace it with ElementalX afterwards though
Click to expand...
Click to collapse
BUT it's ALWAYS better to read a few pages from the ROM's thread before flashing it.
Actually if you flash BlissPop rom today then your device won't boot (issue with stock kernel). So you must flash a custom kernel to be able to boot to Android.
Hi all. I'm a bit of a noob who just really started digging into custom roms and rooting this month. A friend helped me root Lollipop when I first got this phone and I've been putting off updating to marshmallow for 6 months, but learned how over the past weekend and I'm loving it! Small problem, though, and I don't know if it's even a real one, but here it is. After all is said and done flashing the XstreStoLite 3.3.1 rom and Aroma add on pack, everything works fine, but the arter97 kernel is no longer listed as the active kernel, even though in XstreStoLite's settings when presented with the overwrite kernel option I always selected No. Is there a reason this is happening? Can I just reflash the kernel now, and is it safe to do so without brick in the phone? Does this rom or any other necessary apps/root features require the custom kernel? Thanks! This was my process in getting my phone up and running:
Factory reset
Flash stock 6.0.1 with Odin
Flash arter97 recovery with Odin
Recovery mode to flash arter97 kernel and superSU
Flash XstreStoLite in recovery, factory reset
Flash aroma addon
Additional random question I had: at what point, if any, should I be flashing the custom bootloader and modem, and does a factory reset/cache wipe delete those or is it one and done? Thank you!
The bootloader and modem flashing is needed if you want to move from 5.x lollipop to 6.x marshmallow.
If you are allready on 6.x there is no need.
If you lost your custom kernel you can reflash it in twrp and after wipe cache/dalvik cache.
If you flash the corect version of kernel the is no problem of softbrick.
Flash a 6.x kernel on a 6.x rom
I was running RR rom on my device then i wanted to change to aosp today but while flashing it got stuck at patching system image unconditionally for like an hour so i flashed the stock COS13 via fastboot.
I can flash MM based roms but no Nougat based roms (
EDIT:
I managed to fix my issue. i went back and flashed twrp 2.8.7.0 recovery and then flashed the latest firmware image. that seems to have fixed my issue. successfully flashed jgcaap's cm14.1 rom now <3
What recovery version are you using?
Re-download the zip rom and flash it again...
Spider-Vice said:
What recovery version are you using?
Click to expand...
Click to collapse
twrp.3.0.2-0 official
iPusak Gaoq™ said:
Re-download the zip rom and flash it again...
Click to expand...
Click to collapse
i can flash all MM roms. i tried to flash 2 nougat roms. both of which i had previously up and running.
Help me please!
K.rockr said:
I was running RR rom on my device then i wanted to change to aosp today but while flashing it got stuck at patching system image unconditionally for like an hour so i flashed the stock COS13 via fastboot.
I can flash MM based roms but no Nougat based roms (
EDIT:
I managed to fix my issue. i went back and flashed twrp 2.8.7.0 recovery and then flashed the latest firmware image. that seems to have fixed my issue. successfully flashed jgcaap's cm14.1 rom now <3
Click to expand...
Click to collapse
Even i'm stuck with the same issue. I flashed the latest firmware too, but it didn't help. I can flash all roms except android nougat roms. Please tell me the entire procedure. Thank you.
evdmello said:
Even i'm stuck with the same issue. I flashed the latest firmware too, but it didn't help. I can flash all roms except android nougat roms. Please tell me the entire procedure. Thank you.
Click to expand...
Click to collapse
Okay so buddy. now do exactly as i tell u okay?
1. flash the latest cm13 snapshot.
2. go to fastboot mode and flash this recovery https://www.androidfilehost.com/?fid=24367857647223599
3. reboot to the new recovery and flash this https://www.androidfilehost.com/?fid=24052804347825946
4. then you reboot to bootloader and flash twrp3.0.2-0
5. flash whichever nougat rom you want because it'll work now .