Database Info

[KERNEL][64-BIT]Zapdos Kernel 1.1 || 26 July 2015

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Features
Compiled from latest CM source.
64-BIT.
Used official GCC toolchain for 64-BIT.
Disabled GFS.
Enabled ARCH_POWER.
Disabled CRC check.
Optimized SLUB.
Optimized Square Root Algorthm.
FIOPS I/O Scheduler.
Added PowerSuspend drivers.
Added Dynamic Fsync v2.0.
Uses AnyKernel configuration (enhanced compatibility theoretically)
Added ThunderPlug, a hotplug driver originally written by Varun Chitre, ported (tuned) to quad core devices by me.
In-App updates.
Merged latest CM changes.
Thermal throttle temperature made configurable.
Add BFQ IOScheduler.
Enabled HMP aware task scheduling.
Upgraded ondemand to Linux 3.18.
Implemented sysfs for Vibrator Intensity.
Added KCAL.
Added Dynamic Readahead Support.
Lowered VFS Cache Pressure.
Added LCD Notifier drivers to support ThunderPlug.
Installation Instructions
From PC
Download zip.
Put it in phone.
Flash .zip through recovery.
Done.
From phone
Download Gesture Control App (v1.7-r2) (Link Below)
Open app, go to Updater section.
Download and flash and enjoy.
Compatibility
It will work on all CM based ROMs (CM and Exodus confirmed).
May work on AOSP based ROMs as it uses AnyKernel, but confirmation required.
Download
Kernel - Direct
App- Gesture Control 1.7-r2
Kernel will soon support in-app updates
Credits
mr_illusionist - For testing, without whom Kernel release would be impossible.
faux123 and Varun Chitre - For their works and ports.
DoomLord - For providing the platform.
XDA:DevDB Information
Zapdos Kernel, Kernel for the YU Yuphoria
Contributors
corphish
Source Code: https://github.com/corphish/zapdos_lettuce
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-07-18
Created 2015-07-18
Last Updated 2015-07-26

Reserved

Reserved

Update v1.1
Changelog
1. Added ThunderPlug, tuned to quad-core devices by me.
2. Added LCD Notifier drivers to support ThunderPlug.
3. Lowered VFS Cache Pressure.
4. Added Dynamic Readahead Support.
5. Added KCAL.
6. Implemented sysfs for Vibrator Intensity.
7. Upgraded ondemand to Linux 3.18.
8. Enabled HMP aware task scheduling.
9. Add BFQ IOScheduler.
10. Thermal throttle temperature made configurable.
11. Merged latest CM changes.
12. In-App updates.
Download updated in OP.
This fixes Accelerometer issues in latest CM builds.

One of the most stable kernel for yuphoria.
I recommend everyone to try it.
Cheers!
Sent from my YU5010 using Tapatalk

[KERNEL][64-bit] Eximious Kernel v1 [10/03]

Eximious Kernel
​
Code:
#include
/*
* Your warranty is now void. Nah! Just kidding No warranty is void in Mi. :)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Governors:
Ondemand
Interactive
Powersave
Performance
Conservative
Lionfish
Impulse
Crazyactive
Features:
USB Fast Charging
KCAL control--by savoca
BFQ I/O Scheduler
Thermal Throttling
Tweaked interactive and conservative governor
Compiled with latest source
LZ4 Compression Level
Fix high load average from uninterruptible waits
Cortex A53/ARMv8 architecture Tune-Up
KCAL
TCP Congestion Algorithms
Undervolted
Cortex A53 Optimization Enhanced.
Wake Lock
Page Mapping
Load Shifter
Download Link
Mod edit: links removed
Click Here to Download
Installation Steps:
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
Recommended Custom Recovery TWRP
Installation Procedure:
Boot Into Recovery Mode
Flash provide Kernel Zip
Wipe Cache and Dalvik*
Reboot To System
*Note: Not required, If u stuck then do Wipe Cache and Dalvik Cache...
Credits:
YoshiShaPow
Hriday Sharma
AudioGod
Lineage
Xiaomi
Enjoy​
XDA:DevDB Information
[KERNEL][64-bit] Eximious Kernel, Kernel for the Xiaomi Redmi 3S
Contributors
bishnuprasad884uu
Source Code: https://github.com/bishnuprasad884uu/android_kernel_xiaomi_msm8937-1
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2017-03-10
Created 2017-03-10
Last Updated 2017-03-11

Reserved

Reserved

Downloading :fingers-crossed:

Thanks bishnu Bhaiya

Can anyone tell me what USB fast charging is ? Is it same as quick charge ?

Booted with no issue working great as of now no fc, no hanging testing governors now thank you very much for the kernel.

Vortex99 said:
Can anyone tell me what USB fast charging is ? Is it same as quick charge ?
Click to expand...
Click to collapse
I think you can charge faster when you plug in to PC/Laptop

Vortex99 said:
Can anyone tell me what USB fast charging is ? Is it same as quick charge ?
Click to expand...
Click to collapse
No its not same usb fast charging means it will charge fast when connected to a usb charging point like ur laptop usb point, normally they charges slowly.

Anyone downloaded???

Can i install in miui 8?

reserved

Thanks a lot

deleted
---------- Post added at 11:20 ---------- Previous post was at 11:18 ----------
Raihan666 said:
Can i install in miui 8?
Click to expand...
Click to collapse
The install script printed "ENjoy MIUIers" . Im installing on MIUI Beta 7.3.2. . will report experience.

tuxmaster3105 said:
deleted
---------- Post added at 11:20 ---------- Previous post was at 11:18 ----------
The install script printed "ENjoy MIUIers" . Im installing on MIUI Beta 7.3.2. . will report experience.
Click to expand...
Click to collapse
Is it work?

Yahoo! Weather provider stop working with this kernel

Is it only for cm13 based rom? Can i use it on miui?
Sent from my Redmi 3X using Tapatalk

Raihan666 said:
Is it work?
Click to expand...
Click to collapse
It successfully booted onMIUI 8 Beta 7.3.2
1. wifi broken
2. Screen not waking up with fingerprint sensor. It works only if u add your fingerprint
otherwise fluid. too early to say about battery.

Fingerprint selfie didn't working either. I use pacrom by Irfan..

Awesome

[KERNEL]☭✯ Soviet Star Kernel ☭✯ MIDO[LINARO][CAF]

Disclaimer​
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
☭✯ Soviet Star Kernel ☭✯ ​RED MI NOTE 4 SD​
Features:
Upstream to 3.18.70 & CAF September 07, 2017 LA.UM.5.6.r1-05800-89xx.0
Android O support
Compiled with Linaro 7.x A53 tool-chain
Optimized for msm8953 chip
KCAL color control
Sound control
GPU boost
KSM,ZRAM, ZCACHE & FONT SWAP
Dynamic Fsync, Arch Power,CRC & Gentle fair sleepers toogle
Added Intelitermal solution
FIOPS, ZEN,MAPLE,SIO,BFG,CFQ,deadline,noop I/O schedulers
ioswitcher
OC to 2.2 ghz
Blue_active,despair,chill,electron,relaxed,alucard,darkness,nightmare,zzmoveconservative, ondemand, userspace, powerspace, interactive(default), performance
Tweaked interactive governor
Early suspend driver
Vibration intensity control
F2FS support
Fingerprint sensor boost driver
exFAT Support
Disabled CRC check (up to 30% faster I/O)
Blocked many wakelocks
USB fast charge
KSM optimization
Zram optimization
random updated to 4.2
Frandom number generator
HZ 100 for best performance
HW 32,chacha20poly1305,poly1305 & SHA256 cypto support
Load average fix
Optimized SHA256
Nvidia power saving tunnigs
Ardeno idler
Lazyplug hotplug
Power suspend
Quick wakeup
USB fast charge 2.0
KCAL color control
Works in both AOSP/LineageOS based ROMs
General Performance & Battery life optimizations
And more you can find on my GitHub in commits
DOWNLOADS ​
Credits:
- LINUS for the sources
- @LordArcadius
- @DroidTug
[email protected]
- @franciscofranco
[email protected]
[email protected]
- @Arnav Gosain​-all the other developers from i cherry-picked commits
-all the other testers
XDA:DevDB Information
☭✯ Soviet Star Kernel ☭✯ MIDO, Kernel for the Xiaomi Redmi Note 4
Contributors
NATO66613, NATO66613
Source Code: https://github.com/kondors1995/android_kernel_xiaomi_msm8953
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R6
Stable Release Date: 2017-09-10
Created 2017-09-10
Last Updated 2017-09-10

Reserved

Reserved

Important Information
You will need EX Kernel Manager to use Sound Control or use this Modded Kernel adiuter adiuter!
Getting Fruitloops(bootloop)? Bugs? Or any other issue? Then post here with logs! cause LOGS or GTFO.
Do read the OP before posting any question or any issue.
Do not ask same question again
Every included feature of this kernel will be given in the features section or in change-logs. Do not ask whether this kernel have this and that feature.
If you do not read OP or ask same question again then you'll be ignored.

CHANGE LOG
R6 release
https://pastebin.com/UqBVGQAn

wow

Kernel looks awesome!

For Mother Russia !

Awesome work. Does this kernel support AOSP & Lineage?

For miui 8/9 Nougat or only for LOS and Aosp based custom ROMs.. ??! [emoji848]
And what's the difference between usb fast charge and usb fast charge 2.0.. ?! [emoji848]
Sent from my Redmi Note 4 using Tapatalk

Dear sir NATO66613, does kernel support generic USB joystick, I trying so many kernels but nothing support joystic, someone people saying its problem of drivers please sir fix this problem
Redmi note 4 not detecting joystick via otg :'(
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Dear sir NATO66613, does kernel support generic USB joystick, I trying so many kernels but nothing support joystic, someone people saying its problem of drivers please sir fix this problem
Redmi note 4 not detecting joystick via otg :'(

Somebody testing this kernel?
Enviado desde mi Redmi Note 4 mediante Tapatalk

dunklesgemut said:
Somebody testing this kernel?
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
Just installed on los 15 which is a secondary with dual boot patcher. It booted and ran ok but kernel info in settings said unknown. Will report later on how well it runs.

zzmoove does not work as it should.
It does not have the functions of HOTPLUG.
Do not scale frequencies as you should.
Does not automatically disable cores.
Bad zzmoove.-
* Lazyplug hotplug also have bugs

mastersaitek said:
Awesome work. Does this kernel support AOSP & Lineage?
Click to expand...
Click to collapse
This is what the OP said
Every included feature of this kernel will be given in the features section or in change-logs. Do not ask whether this kernel have this and that feature.
If you do not read OP or ask same question again then you'll be ignored.
Click to expand...
Click to collapse

Finally kernel that is focusing on performance , wish you best of luck and im going to test this asap..

Awesome kernel ! Works pretty fine. The performance is same but I did notice faster game response in asphalt 8.... Overall smooth kernel

Would you make version of MIUI sir, i am willing to testing for you

Awesome one..maybe any plan 4 stock miui?

looks good. thanx very much

[KERNEL][MIDO][3.18.y] Canting 1.2 [24/03/2019]

INTRODUCTION​Canting is a kernel based on Google Common 3.18 merged over CAF-kernel.lnx.3.18.r34-rel. Built to provide security and stability improvement​
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
FEATURES​----------------------------------------------
• Only for Custom ROM 8.1.0 & 9.0.0
• Treble/Non-Treble Support
• Linux version 3.18.137
• CAF Tag LA.UM.7.6.r1-04300-89xx.0
• Build with CLANG 9.x optimized for arm64 compiled with build-tools-clang
• Kernel Hardening from Copperhead OS
• CPU Governors: interactive, conservative, ondemand, powersave, performance, userspace
• I/O Schedulers: noop, deadline, cfq, bfq
• Live Display Driver
• Compat vDSO from Pixel kernel
• Native DT2W support
• WireGuard VPN support (Current version: 0.0.20190227)
• KCAL colour control
• Sound Control
• Vibration Intensity Control
• Boeffla wakelock blocker
• sdFAT, exFAT and NTFS Support
• Better performance
• CRC & SHA256 crypto algorithms
• Blocked many wakelocks
• Removed safetynet flags (no need of magisk to bypass safteynet)
• Improved zRAM with lz4 compression
• Tweaked Westwood TCP Congestion set as default
• CPU Boost
• Adreno idler
• Spectrum Kernel Manager
• for more info check my commits
INSTALLATION INSTRUCTIONS​
Download latest kernel version
Boot to recovery
Flash Magisk (skip this if already installed)
Flash kernel.zip
reboot to system
DOWNLOAD LINK​GDrive​ - Github​
CREDITS​• nathanchance
• abhishek987
• fransiscofranco
• flex1911
• All of contributors from my git history ​
XDA:DevDB Information
Canting, Kernel for the Xiaomi Redmi Note 4
Contributors
khusika
Source Code: https://github.com/khusika/canting_kernel_xiaomi_msm8953/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2019-03-24
Created 2018-11-11
Last Updated 2019-03-23

Reserved

Reserved

Nice. Will try!

New kernel for mido

Tried this kernel on pe unofficial by aryan. After flashing the kernel it went to fastboot mode from recovery! And by the way why do i need to flash magisk? Well i did not install magisk is this happening because of that?

I got bootloop after flash the kernel. My screen keep booting. Im in aex oreo latest

Oh I love me some new kernel. Thank you very much. Will try.

thanks dev! downloading now

Sanjai23 said:
Tried this kernel on pe unofficial by aryan. After flashing the kernel it went to fastboot mode from recovery! And by the way why do i need to flash magisk? Well i did not install magisk is this happening because of that?
Click to expand...
Click to collapse
Maybe magisk is used for the spectrum app?

Nice to see you there @khusika!!

Please make Overclock version dev?

I got bootloop.

Hi Dev, and thanks for your work. I saw your thread on mi A1 forum about Linux 4.9 kernel, so, can I know if it's possible to have a new kernel version for mido? It is only a question, sorry if this is ETA or OT. Good work!
P.S. I have a problem with liquid remix pie. During kernel installation, the ROM is recognized as Non Treble ROM , so my device go into bootloop

naisu @khusika

BootLoop??
Got bootloop on MSM Xtented Latest build!

Englezos said:
Nice to see you there @khusika!!
Click to expand...
Click to collapse
Who would've guessed that two kernel devs are friends? :,D Nice job there, you two
---------- Post added at 21:48 ---------- Previous post was at 21:08 ----------
Sorry to report bad news but bootloop occurs on Pixel Experience Pie ROM r10. Had to revert to Englezos r9.

Got bootloop on miuipro10 gsi
Sent from my mido using XDA Labs

adamnthing said:
I got bootloop after flash the kernel. My screen keep booting. Im in aex oreo latest
Click to expand...
Click to collapse
Sanjai23 said:
Tried this kernel on pe unofficial by aryan. After flashing the kernel it went to fastboot mode from recovery! And by the way why do i need to flash magisk? Well i did not install magisk is this happening because of that?
Click to expand...
Click to collapse
---------- Post added at 23:30 ---------- Previous post was at 23:29 ----------
superjules0 said:
I got bootloop.
Click to expand...
Click to collapse
FN07 said:
Hi Dev, and thanks for your work. I saw your thread on mi A1 forum about Linux 4.9 kernel, so, can I know if it's possible to have a new kernel version for mido? It is only a question, sorry if this is ETA or OT. Good work!
P.S. I have a problem with liquid remix pie. During kernel installation, the ROM is recognized as Non Treble ROM , so my device go into bootloop
Click to expand...
Click to collapse
mistu2012 said:
Got bootloop on MSM Xtented Latest build!
Click to expand...
Click to collapse
tjahjo.djoko said:
Got bootloop on miuipro10 gsi
Sent from my mido using XDA Labs
Click to expand...
Click to collapse
It seems the kernel won't detect treble status properly and because of this it will flash non treble version either way. Came up with a quick fix and seems to be working. Replaced non treble with treble so both of them is actually treble supported inside the zip. Also made one with the same method for non treble roms too. Works for me.
Treble version.
Non treble version.

greenys' said:
---------- Post added at 23:30 ---------- Previous post was at 23:29 ----------
It seems the kernel won't detect treble status properly and because of this it will flash non treble version either way. Came up with a quick fix and seems to be working. Replaced non treble with treble so both of them is actually treble supported inside the zip. Also made one with the same method for non treble roms too. Works for me.
Treble version.
Non treble version.
Click to expand...
Click to collapse
Nice one bro ?

[KERNEL][MIUI/AOSP] Octopus Kernel

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at yo
*/
Sorry for making new thread because i can't clean up the previous thread
Compatibility:
• PURE MIUI running on Nougat (Marshmellow is not support)
• TREBLE ROM. AOSP, GSI running on Oreo-Pie (8.1-9)
Features:
• Compiled with Linaro 7.3.x Toolchain
• CPU Freq 652-2208MHz
• GPU Freq 133-700MHz
• CPU Governors: Interactive, Conservative, Ondemand, Userspace, Powersave, Performance, Electron and Intelliactive
• I/O schedulers: bfq, noop, deadline, cfq, maple
• F2FS Support
• WireGuard VPN support
• Sound Control, KCAL, Vibration Strenght
• SafetyNet bypass by Sultanxda
• Boeffla wakelock blocks
• Spectrum Support
• Etc....
Installation Steps:
• Backup your current kernel!
• Download latest kernel
• Boot into TWRP Recovery
• Select the package
• Reboot (no need to wipe anything)
Source Code:
MIUI - https://github.com/ocoot/octopus_miui_mido
AOSP - https://github.com/ocoot/octopus_aosp_mido
Thanks to:
• abhishek987
• akhilnarang
• TheHitman7
• flar2
• frap129
• franciscofranco
• Adesh15
• Adekmaulana
• krasCGQ
• More on my github commit​
XDA:DevDB Information
Octopus Kernel, Kernel for the Xiaomi Redmi Note 4
Contributors
ocoot
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2019-01-22
Created 2019-01-22
Last Updated 2019-01-30

Changelog:
20190404
Upstreamed to Linux 3.18.138
Updating the latest thermal-engine.conf from @TheHitMan7
20190331
Upstreamed to Linux 3.18.137
20190226
Upstreamed to Linux 3.18.136
Updating the latest thermal-engine.conf from @TheHitMan7
20190129
Upstreamed to Linux 3.18.133
20190124
Darkness Gov Added
Updating Spectrum Config
FK Manager Profile Support
USB Fast Charge
Force FastCharge to 2500mA

Download
AFH​
Note:
- Higher DATE is newer Build. Latest Build 20190404
- Miui build starting with miui-octopus-blabla.zip
- Aosp build starting with mido-octopus-blabla.zip
- Aosp build compatible with all Treble Rom's (Oreo-Pie), all MIUI GSI/Port Rom's (Oreo-Pie)
- Don't Use MIUI Build to MIUI GSI Rom's
- Officially dropped support for treble roms. last build for treble roms is mido-octopus-20190129.zip
- For MIUI, i'm still here for it to always trying my best to update
Telegram Group: Octopus Kernel

Thanks, i thought you abandoned the project. ?

Did you update kernel source?

i test for miui i hope not lag2

Thanks for supporting Miui.

Thanks dev. You deserved all likes because of supporting miui roms.

Telegram ?

puturaya20 said:
Telegram ?
Click to expand...
Click to collapse
t.me/octopuskernel
Zile995 said:
Did you update kernel source?
Click to expand...
Click to collapse
yep. check at the 1st post
Walden0 said:
Thanks, i thought you abandoned the project. ?
Click to expand...
Click to collapse
no. i just need to restart the thread again hehehe. i'm forgot about my reserved post at the previous thread looool

New update are up ))

ocoot said:
New update are up ))
Click to expand...
Click to collapse
Bro can you make this kernel fully performance based with spectrum support like OC to 2.7 ghz?
And gpu OC to 1100 mhz?

baba9 said:
Bro can you make this kernel fully performance based with spectrum support like OC to 2.7 ghz?
And gpu OC to 1100 mhz?
Click to expand...
Click to collapse
if you find something like that, there is eXtreme Kernel available for you bro

so far so good

ocoot said:
if you find something like that, there is eXtreme Kernel available for you bro
Click to expand...
Click to collapse
But that is way too outdated

Thanks, bro.

baba9 said:
But that is way too outdated
Click to expand...
Click to collapse
You got storm gaurd

Very nice kernel, got some nice battery life and no performance issues so far.

baba9 said:
But that is way too outdated
Click to expand...
Click to collapse
try to ask the dev to update the kernel via telegram group, maybe

ocoot said:
try to ask the dev to update the kernel via telegram group, maybe
Click to expand...
Click to collapse
Good kernel just installed how to set for pubg any profile? Thanks in advance
Sent from my mido using XDA Labs
---------- Post added at 09:48 AM ---------- Previous post was at 09:46 AM ----------
ocoot said:
try to ask the dev to update the kernel via telegram group, maybe
Click to expand...
Click to collapse
Also is spectrum app supported?
Sent from my mido using XDA Labs