hi! I want to install a custom rom on my galaxy fit..i tried to root my phone with all the methods but it fails to root! i tried all versions of gingerbreak,z4root,superoneclick,universalroot,unlockroot,easyroot,and all btw every time it fails!please help me! help me rooting my phone.. thank you!
how can i install custom recovery?is there any tool or something?
Did u search fda to root ur phne
Sent from my Micromax A50
---------- Post added at 01:16 PM ---------- Previous post was at 01:11 PM ----------
I found this process by mohitswani
Samsung Galaxy Fit S5670 – Process For Root & Install CustomRecovery ImageSamsung Galaxy Fit is one of the most famous device which is known because of it’s affordability and great price. Galaxy Fit users can now enjoy Rooting the device, and due course of this article we will tell you how you can install Custom Recovery on your device after Rooting it..Warning for Beginners:Note: This is an rooting and installing process for the mobile phone named Galaxy Fit S5670 and has to be applied to the Mobile phone using the Recovery Mode in the mobile phone. The steps which are included in this guide are very risky and can even brick off your mobile phone. Unless you are aware with CustomROMS, Firmwares and ODIN, don’t even try these things on your mobile phone..Pre-Requisites to Root and InstallCustom Recovery on your SamsungGalaxy FitThe instructions are working for Samsung Galaxy Fit, S5670 Originally manufactured.Backup all of your SMS Messages using SMS Backup Application.Sync all of your Contacts with theGmail Application.Copy all of your notes manually to somewhere else, as if in case yourmobile phone gets bricked these notes will be deleted from the mobile phone.Take a backup of call logs, APN Settings, and other important things.Charge your mobile phone so that it would be having more than 60% battery.Now, enable USB Debugging Mode in your mobile phone (Settings > Applications >Development > USB Debugging).Samsung Device drivers installed in your computer.Follow all steps carefully in order to get 100% assured success.How To Root and Install Custom Recovery on your Samsung Galaxy FitNote: We have written each and every step clearly in order to make the rooting process successful but if any wrong step is taken then Neither me nor thedroidnation.comwill be held responsible in case your device gets bricked.Download Odin, Rooting File and the OPS File from the links to your computer and move them to anew folder in order to prevent any confusions.Turn off your mobile phone and bring the mobile phone to download mode (hold the Volume Down button + Home Key + Power Button and the device will start itself).Now, Shoot up the ODIN executable file.Click on the OPS Tab in the ODINwindow and select the “BENI_v1.0.ops” file after that tick the “One Package” option and select the file “beni_cwm-5_ext4_v2“.Connect your mobile phone to the computer, and wait for the devicedrivers to get installed. After the installation of drivers is complete then the ID:COM section in the ODIN downloader window will turn yellow.Wait for some time, and as soon as the installation is complete thephone will reboot itself. Now, you can remove the USB cable.Now, You can access recovery mode on your mobile phone by holding Volume Up + Home Button+ Power Key and the device will start itself.Now, select “Wipe data/factory reset” & “Wipe Cache partition” one-by-one and the device caches will be cleared off. After this select “Wipe dalvik cache“.Congratulations!! You’ve successfully installed Custom Recovery in your Samsung Galaxy Fit...Press Thanks button If I help U in any manner...
By mohitswani not me.press thanks if hlpd
Sent from my Micromax A50
---------- Post added at 01:17 PM ---------- Previous post was at 01:16 PM ----------
For original these visit
http://forum.xda-developers.com/showthread.php?t=1595441
Sent from my Micromax A50
---------- Post added at 01:20 PM ---------- Previous post was at 01:17 PM ----------
For all custom roms for ur device visit
http://allaboutgalaxyfit.blogspot.com/
Pres thanks if Helped u
Sent from my Micromax A50
ajeteja said:
Did u search fda to root ur phne
Sent from my Micromax A50
---------- Post added at 01:16 PM ---------- Previous post was at 01:11 PM ----------
I found this process by mohitswani
Samsung Galaxy Fit S5670 – Process For Root & Install CustomRecovery ImageSamsung Galaxy Fit is one of the most famous device which is known because of it’s affordability and great price. Galaxy Fit users can now enjoy Rooting the device, and due course of this article we will tell you how you can install Custom Recovery on your device after Rooting it..Warning for Beginners:Note: This is an rooting and installing process for the mobile phone named Galaxy Fit S5670 and has to be applied to the Mobile phone using the Recovery Mode in the mobile phone. The steps which are included in this guide are very risky and can even brick off your mobile phone. Unless you are aware with CustomROMS, Firmwares and ODIN, don’t even try these things on your mobile phone..Pre-Requisites to Root and InstallCustom Recovery on your SamsungGalaxy FitThe instructions are working for Samsung Galaxy Fit, S5670 Originally manufactured.Backup all of your SMS Messages using SMS Backup Application.Sync all of your Contacts with theGmail Application.Copy all of your notes manually to somewhere else, as if in case yourmobile phone gets bricked these notes will be deleted from the mobile phone.Take a backup of call logs, APN Settings, and other important things.Charge your mobile phone so that it would be having more than 60% battery.Now, enable USB Debugging Mode in your mobile phone (Settings > Applications >Development > USB Debugging).Samsung Device drivers installed in your computer.Follow all steps carefully in order to get 100% assured success.How To Root and Install Custom Recovery on your Samsung Galaxy FitNote: We have written each and every step clearly in order to make the rooting process successful but if any wrong step is taken then Neither me nor thedroidnation.comwill be held responsible in case your device gets bricked.Download Odin, Rooting File and the OPS File from the links to your computer and move them to anew folder in order to prevent any confusions.Turn off your mobile phone and bring the mobile phone to download mode (hold the Volume Down button + Home Key + Power Button and the device will start itself).Now, Shoot up the ODIN executable file.Click on the OPS Tab in the ODINwindow and select the “BENI_v1.0.ops” file after that tick the “One Package” option and select the file “beni_cwm-5_ext4_v2“.Connect your mobile phone to the computer, and wait for the devicedrivers to get installed. After the installation of drivers is complete then the ID:COM section in the ODIN downloader window will turn yellow.Wait for some time, and as soon as the installation is complete thephone will reboot itself. Now, you can remove the USB cable.Now, You can access recovery mode on your mobile phone by holding Volume Up + Home Button+ Power Key and the device will start itself.Now, select “Wipe data/factory reset” & “Wipe Cache partition” one-by-one and the device caches will be cleared off. After this select “Wipe dalvik cache“.Congratulations!! You’ve successfully installed Custom Recovery in your Samsung Galaxy Fit...Press Thanks button If I help U in any manner...
By mohitswani not me.press thanks if hlpd
Sent from my Micromax A50
---------- Post added at 01:17 PM ---------- Previous post was at 01:16 PM ----------
For original these visit
http://forum.xda-developers.com/showthread.php?t=1595441
Sent from my Micromax A50
---------- Post added at 01:20 PM ---------- Previous post was at 01:17 PM ----------
For all custom roms for ur device visit
http://allaboutgalaxyfit.blogspot.com/
Pres thanks if Helped u
Sent from my Micromax A50
Click to expand...
Click to collapse
btw by doing this only custom recovery will be installed...what about rooting my phone? and Isn't there any easier way?this is so complicated..
Have u tried this?
http://forum.xda-developers.com/showthread.php?t=1606380
Press thnx button if it was helpful(plz)
Sent from my GT-S5670 using XDA
Hi,
I have MANN ZUG 5s i was using adb tool and tried to reboot device in bootloader using command
fastboot reboot-bootloader
but my phone got stuck, it will show fastboot downloading.... in black background. No matter how many times i restart it will get stuck in this screen. If i pull out the battery and put in again and press the power and volume down button it will go to recovery mode i tried to wipe date/factory reset nothing helped.
I tried to find the compatible boot.img file to flash the boot image in recovery mode with "apply update from adb" but it will fail with "signature verification failed" error. also tried to flash new ROM of another device(because i cannot find the ROM for this device) in similar way all fail with signature verification.
Any help is highly appreciated.
Regards,
Swat
same with my problem
i got zug 5s too but it seems there's no available custom rom for our device yet
Hello,
I succeded to root my Mann Zug 5 plus (5S 16G) with the software named " Iroot 1.8.8.20465 "
Install this software on the computer, launch it, after, connect the phone with usb debugging enabled, and click on the connect button of the software.
This will install some applications on the phone :
App Cool :useless and parasit app, you can un-install immediately
One Cleaner : useless and parasit app, you can un-install immediately
King Root : the root application you must keep it. (go into parameters, and un-check the auto-update and auto-download to be tranquil with eventual boring app)
I tried to install supersu after the install kingroot, to replace it, but it does not work. So I kept kingroot...
Hoping this may help someone a day...
-->Mike
---------- Post added at 10:42 AM ---------- Previous post was at 10:10 AM ----------
Hello,
I succeded to root my Mann Zug 5 plus (5S 16G) with the software named " Iroot 1.8.8.20465 "
I downloaded this here : soft-mgyun-com. qcloudcdn. com /files /products /vRoot /1005 /zip /iRoot_160527 .zip
(I found this adress on a chinese forum, thx to google translate!)
If the link doesn't function, I re-uploaded it on my google drive : drive. google. com /file /d /0B5AxEM3H6bPTWmVjX0ZGQUV5Ymc /view?usp=sharing
To use links, remove the spaces, ... I ca'nt post external adresses because it's my first post!
Install this software on the computer, launch it, after, connect the phone with usb debugging enabled, and click on the connect button of the software.
This will install some applications on the phone :
App Cool :useless and parasit app, you can un-install immediately
One Cleaner : useless and parasit app, you can un-install immediately
King Root : the root application you must keep it. (go into parameters, and un-check the auto-update and auto-download to be tranquil with eventual boring app)
I tried to install supersu after the install kingroot, to replace it, but it does not work. So I kept kingroot...
Hoping this may help someone a day...
-->Mike
This is the method I did to successfully root my device....J700H Marshmallow.
I'm not responsible for any harm upon rooting your phone, root at your own risk.
Steps to root your phone:
1) Download TWRP Recovery & SuperSU file to your computer. Then copy SuperSU to your device.
2) Turn off your phone.
3) Go to download mode (by pressing Volume down+home+power buttons at the same)
4) Open ODIN
6) Connect your phone to your computer through USB cable and wait till Odin detects your device.
7) In ODIN click on AP and then select the recovery file you downloaded.
8) Click on start. Done.
9) Turn off your phone.
10) Reboot to recovery (by pressing Volume up+home+power buttons).
11) Flash SuperSU you copied to your device.
12) Done....Reboot....Enjoy.
Brother ? Plz try To say how to work Xposed module.. I already root my device.. But Xposed module Greenify and Other apps stopped my phone.apk
Sent from my SM-J700H using XDA-Developers mobile app
Nilshalok said:
Brother ? Plz try To say how to work Xposed module.. I already root my device.. But Xposed module Greenify and Other apps stopped my phone.apk
Sent from my SM-J700H using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry but don't use Xposed.
not working|
الاذان شغال عندك في الفيدو لو انت عربي اكلمك عربي اسهل
Triggers the Knox Counter or not?
My rootchecker app says "Sorry root access is not properly installed, i did evrything step by step.
---------- Post added at 08:19 PM ---------- Previous post was at 07:43 PM ----------
ok ...now that have changed the statement ,it says root access available....thanks for the guide..:good::good::good::good:
shahzeb khattak said:
My rootchecker app says "Sorry root access is not properly installed, i did evrything step by step.
---------- Post added at 08:19 PM ---------- Previous post was at 07:43 PM ----------
ok ...now that have changed the statement ,it says root access available....thanks for the guide..:good::good::good::good:
Click to expand...
Click to collapse
what we can do?
can anyone tell me how to install Gapss, root and CWM recovery for Huawei enjoy 7 Plus ? i've looking and browsing.. then stuck on bootloop pls help me :crying:
ikhlasshyka said:
can anyone tell me how to install Gapss, root and CWM recovery for Huawei enjoy 7 Plus ? i've looking and browsing.. then stuck on bootloop pls help me :crying:
Click to expand...
Click to collapse
Sorry, I can't help you because I am in the same probleme... I don't find anything.
But first, did you unlock the fastboot ? (by huawei site)
hey..
same pb on trt-al00 device.. it is android 7 and not installing to Google Play Services..
GAPPs in Huawei Enjoy 7 Plus
I managed to unlock the bootloader, install TWRP recovery and root my China bought Huawei Enjoy 7 Plus.
Then, I installed open_gapps-arm-7.0-mini-20171101 via TWRP, wiped cache and rebooted.
The problem now is that Google Play Store won't open (it quickly prompts "Checking info" and then crashes) and neither can I sign in to my Google account.
Same with the "pico" version. The "stock" version installation failed due to lack of space.
---------- Post added at 07:16 PM ---------- Previous post was at 07:11 PM ----------
I was wondering if we could flash its global twin brother Huawei Y7 Prime stock firmware into Huawei Enjoy 7 Plus. I just could not find the rom file available to try.
Try the installation with the Magic Module. To use a Magisk module use this guide.
loconafita said:
I managed to unlock the bootloader, install TWRP recovery and root my China bought Huawei Enjoy 7 Plus.
Then, I installed open_gapps-arm-7.0-mini-20171101 via TWRP, wiped cache and rebooted.
The problem now is that Google Play Store won't open (it quickly prompts "Checking info" and then crashes) and neither can I sign in to my Google account.
Same with the "pico" version. The "stock" version installation failed due to lack of space.
---------- Post added at 07:16 PM ---------- Previous post was at 07:11 PM ----------
I was wondering if we could flash its global twin brother Huawei Y7 Prime stock firmware into Huawei Enjoy 7 Plus. I just could not find the rom file available to try.
Click to expand...
Click to collapse
Could you please share how did you got that? I've been looking for TWRP / root just for installing gApps (the **** GMSCore / google installers from HiApp / miui, and so on are NOT working, GMSCore doesn't install, and i always get the "install GMSCore libs for app to work")
I was happy with my Note3 when it suffered an accident in china, bought quickly a mobile "please with global support", and yes, it works great... but without google apps. and I really need them (most important: for many 3rd party using login; lesser: many apps bought in play store, gmaps with its history mode, and so)
In fact, I don't need to nstall everything, I think GMSCore is enough; i've tried to install via ADB but every version i find (even in MicroG) says the package is signed with V2 but signature is not present; So maybe we could have it working if we find a SIGNED for Androiod 7 / emui 5.1 version of GMSCore.apk
Regards,
XiaoMigue said:
Could you please share how did you got that? I've been looking for TWRP / root just for installing gApps (the **** GMSCore / google installers from HiApp / miui, and so on are NOT working, GMSCore doesn't install, and i always get the "install GMSCore libs for app to work")
Click to expand...
Click to collapse
XiaoMigue said:
I've just tried to post the external link with the tutorial on how to install TWRP, but was denied with the "ALL new users prevented from posting outside links in their messages" warning.
Let's work around it. Google the sentence below and it should take you to the huaweirom page with the instructions and the link for the TWRP download.
华为畅享7 Plus刷recovery图文教程_畅享7 Plus安装rec方法
This TWRP version boots in Chinese, but there's a button to change the language to English.
Click to expand...
Click to collapse
loconafita said:
XiaoMigue said:
Could you please share how did you got that? I've been looking for TWRP / root just for installing gApps (the **** GMSCore / google installers from HiApp / miui, and so on are NOT working, GMSCore doesn't install, and i always get the "install GMSCore libs for app to work")
Click to expand...
Click to collapse
XiaoMigue said:
I've just tried to post the external link with the tutorial on how to install TWRP, but was denied with the "ALL new users prevented from posting outside links in their messages" warning.
Let's work around it. Google the sentence below and it should take you to the huaweirom page with the instructions and the link for the TWRP download.
华为畅享7 Plus刷recovery图文教程_畅享7 Plus安装rec方法
This TWRP version boots in Chinese, but there's a button to change the language to English.
Click to expand...
Click to collapse
Thanks a lot. Let's see if I can post url... https://pan.baidu.com/s/1o89gkKM
---------- Post added at 09:16 AM ---------- Previous post was at 08:35 AM ----------
loconafita said:
XiaoMigue said:
Could you please share how did you got that? I've been looking for TWRP / root just for installing gApps (the **** GMSCore / google installers from HiApp / miui, and so on are NOT working, GMSCore doesn't install, and i always get the "install GMSCore libs for app to work")
Click to expand...
Click to collapse
XiaoMigue said:
I've just tried to post the external link with the tutorial on how to install TWRP, but was denied with the "ALL new users prevented from posting outside links in their messages" warning.
Let's work around it. Google the sentence below and it should take you to the huaweirom page with the instructions and the link for the TWRP download.
华为畅享7 Plus刷recovery图文教程_畅享7 Plus安装rec方法
This TWRP version boots in Chinese, but there's a button to change the language to English.
Click to expand...
Click to collapse
Almost there. TWRP seems to install, but for the misc.bin...
Code:
target reported max download size of 531628032 bytes
sending 'misc' (8 KB)...
OKAY [ 0.004s]
writing 'misc'...
FAILED (remote: Command not allowed)
finished. total time: 0.010s
misc.bin has "boot-recovery" and a bunch of \0 (NUL charachter) up to 8kb.
phone is not booting into TWRP (it still opens the emui erecovery). But it is not bricked, at least...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Did you use the chinese .bat file included on the zip file to flash TWRP? I didn't get this error.
Both recovery can be accessed. When I turn it on while pressing vol+ button, if the phone is connected to the USB, it boots to the stock recovery. If it is not connected, it boots to TWRP. The vol+ button has to be released as soon as the screens lights.
loconafita said:
Did you use the chinese .bat file included on the zip file to flash TWRP? I didn't get this error.
Both recovery can be accessed. When I turn it on while pressing vol+ button, if the phone is connected to the USB, it boots to the stock recovery. If it is not connected, it boots to TWRP. The vol+ button has to be released as soon as the screens lights.
Click to expand...
Click to collapse
(sorry the delay... work trip almost no time)
You said rigth. Every recovery is avaliable (from huawei site:
Phone off state, you can enter Fastboot / eRecovery / Recovery / upgrade these modes:
Need to connect the computer:
Fastboot mode: long press the volume key + power button.
eRecovery mode: long press the volume key + power button.
Do not need to connect the computer:
Recovery mode: long press the volume key + power button.
Upgrade mode: long press the volume key + volume key + power key.
When the phone is in these modes, long press the power button can restart the phone to exit the mode.
). I tried some different combos of microg/gapps/xposed and so, never working (the most I've got was microG telling me spoof signature was activated, but only once, all other times it was not possible). some GMSCore.apk seemed ok from source but it was not installing, when trying via TWRP, it said something about not signature so I needed spoofing it.
in one of the tries, i bootlooped my phone. The "erase all google apps" was my fault. I uninstalled 3 apps (titanium), and on reboot... boot loop prize! Since then, i've been trying to restore, at least to original mobile. But no luck, the only site i've found with firmware (1 full firm, 3 OTA updates) redirects to a huawei site that gives error for downloading them (although other files on same site works). I've tried looking for Y7 prime firmware also without success.
I even tried the eRecovery: boot phone on erecovery, connect to wifi, it updates. Bleh. Not for me. Found this statement on huawei site: http://consumer.huawei.com/cn/support/faqs/detail/?id=143646&name=华为畅享7 Plus -- basically, you cannot do it if you're root. Ok, unrooted phone (via twrp). Same error: "getting package info failed"
I've been trying to d'load rom from http://www.huaweirom.com/device/changxiang7plus/ but bad luck: files are too big and you should install CHINESE app (Baidu cloud). problem is it needs a user for Baidu, and it needs a chinese mobile card. I will insist and maybe i can get the ROM.
Bootloop
I have a chinese SIM card that luckily worked in my country and allow me to create a Baidu account. I downloaded the file and uploaded to my Google Drive account. The shared link was sent to you via PM. I never tested it, since my bootloops have been solved restoring a previous backup done via TWRP.
About the stock recovery, it wasn't working with the build B201. But after the upgrade to the build B210, I was also able to recover it OTA.
Have you tried to TWRP's Wipe factory reset?
loconafita said:
I have a chinese SIM card that luckily worked in my country and allow me to create a Baidu account. I downloaded the file and uploaded to my Google Drive account. The shared link was sent to you via PM. I never tested it, since my bootloops have been solved restoring a previous backup done via TWRP.
About the stock recovery, it wasn't working with the build B201. But after the upgrade to the build B210, I was also able to recover it OTA.
Have you tried to TWRP's Wipe factory reset?
Click to expand...
Click to collapse
Hey
Can you share the ROM with me also? Please PM me the Google Drive link,
In addition, what do you mean by stock recovery? my phone got screwed! how can I upgrade to build B210?
Thanks a lot!
loconafita said:
I have a chinese SIM card that luckily worked in my country and allow me to create a Baidu account. I downloaded the file and uploaded to my Google Drive account. The shared link was sent to you via PM. I never tested it, since my bootloops have been solved restoring a previous backup done via TWRP.
About the stock recovery, it wasn't working with the build B201. But after the upgrade to the build B210, I was also able to recover it OTA.
Have you tried to TWRP's Wipe factory reset?
Click to expand...
Click to collapse
FYI: I got your download. Thanks very much ^_^
Also, prior to watching your PM, I found a way for downloading the pan.baidu files without an account (I already had tampermonkey and an arab page had a script for so... just installed script -after reading what it does, of course-, visited page again, and hitting download just simply downloads it)
In any case, I managed to make a "fastboot flash system system.img" (with system.img extracted from update.app), amd mobile came up; needed to reconfigure it all, so i went again through all menus and so. But
WARNING - DON'T DO THIS
I activated the "Find phone" feature from huawei
WARNING - DON'T DO THIS
and that was a BIG mistake. I started again trying to setup google... and i broke it again (i think one of the "GMSInstallers out there I've tested makes an uninstall... but it uninstalls too much!). Mobile was booting, but it only showed a BLACK screen with navigation buttons, and pressing volume keys dropped down the volume menu (in chinese) and that was all. Okay, let's restore again... fastboot... WTF! "FAILED: Need to disable Phone finer first". But the f*** phone does not boot so I can not do that! nightmare begins. Again.
Solved, though. Steps:
- put mobile on fastboot mode (still unlocked, btw)
- Use HiSuite in PC for upgrading. It said "downloading"... uncompressiong...installing recovery...installing system...
- (yes, stock recovery, TWRP lost)
- Installation failed. WTF?!?!?!
- reset mobile; it starts usual boot animation, and then vibrates, and reboots automatically in stock recovery. I try to use it for download and setup upgrade. after download is complete, it fails to install
- Retry HiSuite. This time it ends telling "success". Reboot mobile again
- Again fails to boot. Again try the Wifi solution. This time, I reboot into recovery again, instead going to normal reboot. I do eery wipe I can. it works. Mobile boots again, as brand new mobile.
- I have version B201 with locked boot and stock recovery. But it works.
- There is an OTA ready; download it and install. First try fails (in recovery mode), second try works. Now I have the B210 version.
- I configure things again, and I go... let's install TWRP again in order to create backup (this time I won't forget to do so)
- First step: unlock bootloader again. Ok, it works. Oh, gosh... it makes a factory reset again (all configs done previously, lost).
- Configure all things again. I update all the apps ready to update. Now I can finish install of TWRP and make a full backup of mobile.
Now I'm going to install TWRP, make a full backup, and try to install only basic gapps in the way i've found in other webs: (make a google search for reference): "
Install, in this order (i have installed them through ADB), but do not run them: GoogleLoginService.apk, GoogleServicesFramework.apk, PrebuiltGmsCore.apk, GoogleCalendarSyncAdapter.apk, GoogleContactsSyncAdapter.apk, Phonesky.apk
Click to expand...
Click to collapse
".
If not, I will try to get ROM for any of Huawei Y7 Prime TRT-AL53, TRT-L21A, or other TRT (for example TRT-LX1, TRT-LX3, Y7 2017, Nova Lite+, they all have 2Gb/16Gb but other specs are the same... and important thing is they are nougat 7.0/emui 5.1 as my last update -B210-, so google apps in that rom may be compatible)
saeedbeliever said:
Hey
Can you share the ROM with me also? Please PM me the Google Drive link,
In addition, what do you mean by stock recovery? my phone got screwed! how can I upgrade to build B210?
Thanks a lot!
Click to expand...
Click to collapse
I have it in a mega link, if you like them:
TRT-AL00B102_Android+7.0_EMUI+5.0.rar
I reccomend you using HiSuite, if you don't mind resetting mobile to original state (bye bye pics, videos, apps, and so on, unless you have them in cloud). On the other hand, I did not tested this with TWRP nor huawei's default recovery, but this update.zip is the file HiSuite has downloaded for trying to restore my mobile. You can dow many things with it:
+ Extract system.img and then make a fastboot flash sytem system.img (i did when mobile still had bootloader unlocked, and it worked, leaving my data live)
+ copy dload folder with update.app inside to the root folder of a microSD and put the microSD inside mobile; then try to boot into emergency mode (up+down) or in recovery and install it. I have not tried this method.
Good luck.
... I'm about to resign.
- Installed GApps the usual way (download from gapps, flash with TWRP, dalvik/cache wipe). Opening Play Store: "GMSCore not installed."
- Uninstalled all. Tried the "install only APKs approach" from mobile, in the sequence specified, it fails.
- Uninstalled all. Tried the "install only APKs approach" from ADB, in the sequence specified, it fails. But a light of hope appears: When trying to install (ADB install ....APK), an error appears regarding signature.
- Uninstall all. Using APK Easy tool i sign the critical APKs and try again the ADB install. They are installed. Reboot in recovery, cache/dalvik wipe. Reboot. Boo... failure.
- Uninstall all. Using APK Easy tool I sign ALL the APKs inside the GAPPs pico package and rebuild the ZIP file. TWRP flash it, no errors on screen, cache/dalvik wipe, reboot... boo. Failure. Now I have the same situation as @loconafita after installing gapps: Play store is there, I can run it but nothing happens (sometimes a brief whitescreen appears but then it comes back to previous screen). The same if I try to register a new google account.
I don't know what else to do. Maybe installing a different ROM with already installed google environment from a non-china version of mobile?
Note: In Twrp, when I try to browse over Data folder, it is encrypted. I don't think it is relevant, as GApps are in system, but... just in case.
Any idea?
EDIT: I've tried the magisk solution, but it gives an error 1 on installing; with same result: it does not complaint about GMSCore, but just doesnt't works. When trying to add a g-account, it briefly shows the "checking..." and it comes back to previous screen
I've tried with and without the signature spoofing (and the GAPPS zip is the original downloaded as is from opengapps). Screenshot of the error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
loconafita said:
I managed to unlock the bootloader, install TWRP recovery and root my China bought Huawei Enjoy 7 Plus.
Then, I installed open_gapps-arm-7.0-mini-20171101 via TWRP, wiped cache and rebooted.
The problem now is that Google Play Store won't open (it quickly prompts "Checking info" and then crashes) and neither can I sign in to my Google account.
Same with the "pico" version. The "stock" version installation failed due to lack of space.
---------- Post added at 07:16 PM ---------- Previous post was at 07:11 PM ----------
I was wondering if we could flash its global twin brother Huawei Y7 Prime stock firmware into Huawei Enjoy 7 Plus. I just could not find the rom file available to try.
Click to expand...
Click to collapse
same problem.. and not finding any ROM for Enjoy 7 Plus / Y7 prime / Holly 4 plus..
If i install twrp on my Huawei enjoy 7 plus and just root it what problems will i get???
VQiWdjj said:
same problem.. and not finding any ROM for Enjoy 7 Plus / Y7 prime / Holly 4 plus..
Click to expand...
Click to collapse
Nice point for Honor Holly 4 Plus (so new that it is still not in the honor support page, but it is selling already...), as it is EXACTLY the same model number as my Enjoy 7 Plus (TRT-AL00)... http://consumer.huawei.com/in/support/phones/honor-holly-4-plus/
Try google app installer apk file
https://forum.xda-developers.com/android/general/google-installer-apk-file-to-install-t3651085
rajeshjangid2011998 said:
Try google app installer apk file
https://forum.xda-developers.com/android/general/google-installer-apk-file-to-install-t3651085
Click to expand...
Click to collapse
still not working.
There's Pop-Up
Install core GMS packages to use Google Play Store.
VQiWdjj said:
still not working.
There's Pop-Up
Install core GMS packages to use Google Play Store.
Click to expand...
Click to collapse
if you are using stock rom By huawei then open HiApp/AppCenter then search for Google play store
---------- Post added at 11:15 AM ---------- Previous post was at 11:12 AM ----------
VQiWdjj said:
still not working.
There's Pop-Up
Install core GMS packages to use Google Play Store.
Click to expand...
Click to collapse
check that you tube video
https://www.youtube.com/watch?v=On3SGirtLJo
Install Rom Stock 3.18 with Gapps support (google apps), (Possibly works for rons 3.05 and 3.11).
Any and all software changes are the responsibility of the user. If you have doubts or little knowledge about these resources don't do it!
I am not responsible for problems or defects when using this tutorial
Make sure you have 100% battery
We will need a pendrive and an OTG.
The files for the pendrive are in the “Pendrive + Roms” folder (the update can be removed if it is not used, eg if you are going to install rom 3.18, you can remove the file from rom 3.05 plus the file from rom 3.11).
The complete folder with the necessary files (vbmetaDISABLE, recoveryTWRP.img ...) and ADB commands is: “ADB Nubia-X folder”, this folder must be saved on the computer for ADB commands.
The ABD commands will basically be:
• fastboot oem nubia_unlock NUBIA_NX616J
• fastboot flash recovery recoveryTWRP.img
• fastboot flash vbmeta vbmetaDISABLED.img
• fastboot reboot
Files on the virtual drive, link:
• https://drive.google.com/drive/folders/15Nzaxe_94Z3LwpCX6WP51SIi1UCAxbec?usp=sharing
• https://encurtador.com.br/zQSW0
Link
Link 2
First we must understand that with the roms in hand, ZTE NUBIA website: Link Nubia, there is a process for the correct update. Example: if we are in rom 3.05 and we want to update to 3.11 or 3.18 using the original recovery, only the OTG (rom on pendrive) will always show an error in the 25% update, so for the correct update you need to downgrade and so the phone is enabled to update later. More precisely, let's say that we are at rom 3.05 and we intend to upgrade to rom 3.18 in view of this we must follow the following steps: 3.05> downgrade to 2.11 <upgrade to 3.18, remembering that it is not necessary to initialize the device between the firmware installations.
(all necessary files are on the virtual drive)
First of all to be able to start with the updates we need to have recovery stock on the device. If you are currently with TWRP you can go to the TWRP menu at: "Advanced" / "Glass Tools" / "Stock Recovery" and drag the bar to the side that will return ´for stock Recovery, if you are in Stock just follow the steps :
Restart the device with Vol + pressed to open the Recovery menu.
The menus are navigated using the Vol + keys; Vol-; and Power as the enter button.
Clear the cache and data: English / Wipe Data / Userdata Partition + Cahe Partition (back up the data previously).
Navigate in the menu: Choose Update Package, here already with the appropriate files on the USB stick, select the firmware “NX616J-update-2.11.zip”.
After updating, it will restart automatically, then press and hold the “Vol +” button and when the menu appears, navigate to: Choose Update Package and select the firmware “NX616J-update-3.18.zip”.
After updating 100% it will restart again, press and hold the “Vol-” button and this time we will enter “Fastboot menu”.
The commands via ADB (See ADB tutorial here on XDA), will be as follows:
6.1 fastboot oem nubia_unlock NUBIA_NX616J (to unlock the bootloader)
6.2. fastboot flash vbmeta vbmetaDISABLED.img (avoid partial brick)
6.3. fastboot flash recovery recoveryTWRP.img (implement TWRP recovery)
After the fastboot commands, we will navigate with the Vol + / Vol- buttons to the “Reboot to recovery mode” option or restart the device with the “Vol +” button pressed.
On the recovery screen select the option “Install” / sub menu “Select Storage” / “USB-OTG” / “Magisk-v20.4.zip” (I repeated this process 2 times)
Now switch on the device normally and make the first and basic necessary settings. Note: if the message appears that the device is corrupt, do not panic. Restart the device with “Vol-” pressed and follow steps “6.1 and 6.2”, and continue the procedures.
After everything is ok check if the “Magisk Manager” is showing on the screen, if ok skip to step “11”. And if not, repeat step “8”. (If the original recovery is restored, repeat step “6”); If a corrupt device appears (partial brick), restart the device with the “Vol-” button pressed and follow steps “6.1 and 6.2”, and continue with step “8”.
Device restarted and with Magisk on the screen we must install the apk: “GoogleLoginService.apk” by the file explorer.
Now again we restart the device in Recovery Mode (“Power” + “Vol +”) and follow the steps: “Install” / sub menu “Select Storage” / “USB-OTG” / “open_gapps-arm64-9.0-pico- 20200403 ”and the pico gapps will be installed (use the pico because I was successful with google services).
Now we restart the device and we will see the “PlayStore” icon but it still doesn't work. So let's install the apps: “microg_YouTube_Vanced_0.2.6.17455_28052019.apk” (MicroG) + “com.google.android.gm_2020.05.17.313130477.apk” (Gmail).
With the applications installed, we start the Gmail app and make the login settings. Upon completion, the “PlayStore” will function normally.
Optional applications: AuroraStore_3.2.8.apk; Solid-Explorer-v2.8.0-Arm64-www.ReXdl.com.apk; Split APKs Installer SAI_v3.12_apkpure.com.apk; YouTube_Vanced-v15.05.54-nonroot-default-dark.apks (YouTube_Vanced is installed by the “SAI” App).
This was the step by step that I did to make the google apps work without problems, I did it twice exactly as described and both times everything went well. The GPS bug does not exist and the Waze app works perfectly, google apps work very well, except google drive when using a .edu account, but with personal accounts they work 100%.
3.21 ok
Also functional with rom 3.21
Thank you for everything .
Im on mokee rom....... could be better to flash stock rom or stay to mokee ? Thanks
Thanks for the information
I have successfully installed the latest room with google play store thanks once again ?
---------- Post added at 10:48 AM ---------- Previous post was at 10:45 AM ----------
rcsj said:
Also functional with rom 3.21
Click to expand...
Click to collapse
Yes It will working with my phone.
---------- Post added at 10:53 AM ---------- Previous post was at 10:48 AM ----------
rcsj said:
Also functional with rom 3.21
Click to expand...
Click to collapse
Yes It is working with my phone.
you don't have a problem of network cut when you receive a sms ?
No it's working fine.
Nubia X,, no Gapps??
Hello,
rcsj
I don't know much about it, I've never had a smartphone without Gapps, this is the exact instructions on how to install Gapps ?? There is no video tutorial.
6. The commands via ADB (See ADB tutorial here on XDA), will be as follows:?? Where tutorial, link?
Thank you for help
hi friends,
is there a solutions how i can root my Nubia X (nx616j) with firmware V3.22 or is there a solution how i can install Google play?
i have tries to flash a lower firmware version , but nothing worked for me.
i have an second same phone with more storage capacity , and this phone worked fine with google play, i hope all of you having solutions fot me
thanks in advance
Master42k
Update:
I managed to do everything, but now have a problem with WIFI, its just simply won't turn on, what can I do fix this?
Hello and thank you so much for this tutorial and tools to add Play Store to the Nubia X.
I know it's an old thread, but there is now a v3.25 official (and probably last) ROM update on the official Nubia X web page. Did anyone install it using this method and is everything working?
I'm still on Mokee ROM and everything seems to be working fine, but since the main maintainer has stopped his (very good!) work, I might once try to go back to stock, just in case.
Thanks in advance