Hello Everyone
I want to to install B512 that show message "Update Failed"
but Install B521
right now myphone has a lot of lag and not smooth and slowly run
i want to downgrade to B390 or B370 (Kitkat)
if possible please help me
thanks
sorry , my english is very poor
First: Install B521 to B521 (to remove any root file)
Second: Local update with B500: http://consumer.huawei.com/ru/support/products/downloads/h60-l4-ru.htm
Third: Local update with B370 or B390.
Tested and approuved by myself
Download this http://consumer.huawei.com/ru/support/products/downloads/detail/h60-l4-ru.htm?id=49543
Place dload folder in root of SD.
Do local Update.
Download B390 here http://consumer.huawei.com/tw/support/downloads/detail/index.htm?id=40542
You can also experience perfect lollipop with this package download B510 here http://hihonor.in/sites/default/files/hono-6-Android-5.1.zip
If you want a completely stable lollipop, Download B510 and the package in step 1.
First local update on B500 (rollback packare step 1), And then force update to 510 its final build and gave me approx 4500 Antutu score.
since i rooted my phone huawei honor 6 L02 i cannot perform the automatic update, i downloaded update.app from the emui website with the right build number, i put it in my sd card "dload" folder and when i chose "local update" on my phone, it boots in to recovery. I found the "dload" folder in recovery and when i try to open it it says "no files found" PLEASE HELP ME I REALLY NEED YOUR HELP
How to find dload folder using stock recovery??
Or if you are using CWM you can't flash update.app with that recovery.
You need to be on stock recovery to update. TWRP or CWM does can not install official updates.
And even if you are on stock recovery updates may fail (especially OTA:s) if you have modified certain stock system files while rooted.
is this thread helping? http://forum.xda-developers.com/honor-6/general/honor-6-stock-roms-t2963180
Since March 12th 2018, Huawei has released on its OTA server a new rom for GEM-702L device :
GEM-702LC209B206 available as "incremential update OTA" (instalable at least on GEM-702LC209B205)
GEM-702LC209B206CUSTC209D001 as "Full OTA".
Changelog is:
Optimizes system stability.
Integrates Google security patches for improved system security.
radio update
firmwareupdate
You can try a official dload of this complete rom, following these isntructions (need to be verified, not sure that dload install will work, then firmware finder below is 100% working installation soltuion)
You can view the OTA on:
https://translate.google.com/transl...l=GEM-702L&firmware_page=0&edit-text=&act=url
You can even download them there. BUT to install them, it's only possible through "Firmware Finder" app or windows software:
https://play.google.com/store/apps/...refinder&ah=u60E7LEmAezozHpNPibQ4HLWhp0&hl=ru
http://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Android app and its proxy is recommended, you'll find plenty of video tutorials:
https://www.youtube.com/watch?v=jm5pFNCO5v8&t=18s&list=PLgw3d3fHTj5E33lNsLcCwcgoraZmfin7V&index=13
https://www.youtube.com/playlist?list=PLgw3d3fHTj5E33lNsLcCwcgoraZmfin7V
Note that the downloaded full OTA file could also by installed through Huawei updater, but it's more tricky than the Firmware Finder app:
https://forum.xda-developers.com/me...ol-huawei-updater-mediapad-x2-hajuuk-t3660689
Also mentioned here
Please report, if you were able to root this version. If yes please zip the system folder and send it to AJ. He could make a new ROM based on this version.
Please test if you have push or GPS problems.
audioralf said:
Also mentioned here
Please report, if you were able to root this version. If yes please zip the system folder and send it to AJ. He could make a new ROM based on this version.
Please test if you have push or GPS problems.
Click to expand...
Click to collapse
Thanks for this link, with file directly installable with official dload method. But this has to be verified, because this site was already wrong on this precise point, for a previous 702L update.
If this work, I wonder if this file is directly installable on 701L or 703L device.
By the way @ajsmsg78 should be able to install this rom on his 703L. Either directly as mentioned above, or by transforming softwarely the device into 702L (by installing : downgrade script, B203 demo, B205). Isn't it?
Djiban said:
Thanks for this link, with file directly installable with official dload method. But this has to be verified, because this site was already wrong on this precise point, for a previous 702L update.
If this work, I wonder if this file is directly installable on 701L or 703L device.
By the way @ajsmsg78 should be able to install this rom on his 703L. Either directly as mentioned above, or by transforming softwarely the device into 702L (by installing : downgrade script, B203 demo, B205). Isn't it?
Click to expand...
Click to collapse
The new B206 update also has a radio update as well as some firmware. The only way to update to that radio and firmware is to flash it on a supported device. However I am finishing up a B206 rom that I put together based off of this and will have it done soon.
ajsmsg78 said:
The new B206 update also has a radio update as well as some firmware. The only way to update to that radio and firmware is to flash it on a supported device.
Click to expand...
Click to collapse
Ok, hope a 702L user will install it , and send the system folder to ajsmsg78
Djiban said:
Since March 12th 2018, Huawei has released on its OTA server a new rom for GEM-702L device :
GEM-702LC209B206 available as "incremential update OTA" (instalable at least on GEM-702LC209B205)
GEM-702LC209B206CUSTC209D001 as "Full OTA".
Changelog is:
Optimizes system stability.
Integrates Google security patches for improved system security.
radio update
firmwareupdate
You can try a official dload of this complete rom, following these isntructions (need to be verified, not sure that dload install will work, then firmware finder below is 100% working installation soltuion)
You can view the OTA on:
https://translate.google.com/transl...l=GEM-702L&firmware_page=0&edit-text=&act=url
You can even download them there. BUT to install them, it's only possible through "Firmware Finder" app or windows software:
https://play.google.com/store/apps/...refinder&ah=u60E7LEmAezozHpNPibQ4HLWhp0&hl=ru
http://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Android app and its proxy is recommended, you'll find plenty of video tutorials:
https://www.youtube.com/watch?v=jm5pFNCO5v8&t=18s&list=PLgw3d3fHTj5E33lNsLcCwcgoraZmfin7V&index=13
https://www.youtube.com/playlist?list=PLgw3d3fHTj5E33lNsLcCwcgoraZmfin7V
Note that the downloaded full OTA file could also by installed through Huawei updater, but it's more tricky than the Firmware Finder app:
https://forum.xda-developers.com/me...ol-huawei-updater-mediapad-x2-hajuuk-t3660689
Click to expand...
Click to collapse
Hi! I have a mediapad X2 702L. It is not rooted, bootloader is not unlocked and without recovery..
I want to install a new stock rom with android 6.0.
Can I install this rom directly with dload metod??
Thanks!!
Hello,
I get a notification that I can update my P20 Pro from .131 version to .152 version.
The update has around 700MB, the problem is that when my update gets downloaded and when I reboot the device it reboots the device in to a TWRP where I get an error 9 with an information that the update has failed to install.
What can I do?
Should I remove TWRP, would that help?
I really want that update since I have very bad SOT (4 hours of SOT max )
Thank you all in advance
Hi,
We can't do it if you have TWRP. You must use HuRUpdater.
I did it on my P20.
You can use Huawei Firmware Finder APK on play store to download the packages.
(I will do it with 8.1.0.164 )
How to use:
Warning: Make sure you know what you are doing and do not flash firmware from other devices.
Download firmware files (for official firmware use Huawei Firmware Finder).
Put files you want to flash in a seperate folder on sdcard.
Supported zip files to flash are (name must match):
update.zip (use FullOTA file)
update_all_hw.zip
update_data_public.zip
Optional: Put recovery.img in same folder if you want to keep custom recovery.
Hi,
On Yandex i found there there is an Android 9 upgrade for Rockchip PX30. I've downloaded it and placed it in my SD card slow.
The update failed due to some verifications etc...
Is there another way to install it? I assume its because its going from 8.1 to 9 which may have different partitions etc. I've tried using the SD Firmware Tool but the downloaded firmware doesnt seem to be valid.
Here are the contents of the zip file:
compatibility.zip
boot.img
oem.new.dat.br
oem.patch.dat
oen.transfer.list
system.patch.dat
system.transfer.list
trust.img
uboot.img
vbmeta.img
vendor.new.dat.br
vendor.transfer.list.
Hi,
i've also a PX 30 that till last friday work properly but now i've a problem with bluetooth after a factory reset:
i can do pairing with my phone, i can start call..or reply at phone but NO SOUND ..(with a2dp ,app work properly and i can listen music from my phone )
Till friday with apkinstaller i saw a bluetooth.apk installed ...(i think that ins't the same that i can see inside app folder)
now i not see this app..you can share with me??
My device isn't routed ...
I also downloaded from this link https://yadi.sk/d/r4fcwhZyKeNiUAthe last rom with android 9 but not installed yet( i already updated MCU to 3.7 from 3.01_4 from this ling ..i've a MTCEGS )https://yadi.sk/d/VzQDC13g3HGZux
---------- Post added at 09:52 PM ---------- Previous post was at 09:49 PM ----------
before MCU upgrade
Hi,
Have you managed to get Android 9 on the PX30? I have tried several times but always get an error after the installation package is verified.
Cheers.
Grimzter said:
Hi,
On Yandex i found there there is an Android 9 upgrade for Rockchip PX30. I've downloaded it and placed it in my SD card slow.
The update failed due to some verifications etc...
Is there another way to install it? I assume its because its going from 8.1 to 9 which may have different partitions etc. I've tried using the SD Firmware Tool but the downloaded firmware doesnt seem to be valid.
Here are the contents of the zip file:
compatibility.zip
boot.img
oem.new.dat.br
oem.patch.dat
oen.transfer.list
system.patch.dat
system.transfer.list
trust.img
uboot.img
vbmeta.img
vendor.new.dat.br
vendor.transfer.list.
Click to expand...
Click to collapse
Did you have any luck updating to Android 9?
Archie_Slap said:
Did you have any luck updating to Android 9?
Click to expand...
Click to collapse
Hi Friends i spent this quarantena coronavirus day to upgrate my px30 android 8.1 in android 9.0!
In the url you have to add "ht".
To do this you need to install the recovery tool of android 9, it's simple you need to download this apk "RecoveryInstaller_PX30.apk" I found this apk in "tps://yadi.sk/d/Qx8le85frD93ng" from this download you take only the RecoveryInstaller_PX30.apk file. Put it in your android and make the install and run. Now you automatic reboot in recovery mode for android 9, you select update software(the second point) you select from usb or sd card an android 9 rom that you have download from Yandex (tps://yadi.sk/d/umCvHqCDzHccr/RockChip%20PX30%20%20Android%209, i take the ota version in main folder) and start the installation (long time) and important when the installation is finish the system return in recovery data, you must select WIPE DATA and apply. And the system restart with android 9.
I just did it now and it worked. My radio is an isudar px30. Good job
Update PX30 Eonon GA9253B to Android 9.0
nanoalieno said:
Hi Friends i spent this quarantena coronavirus day to upgrate my px30 android 8.1 in android 9.0!
In the url you have to add "ht".
To do this you need to install the recovery tool of android 9, it's simple you need to download this apk "RecoveryInstaller_PX30.apk" I found this apk in "tps://yadi.sk/d/Qx8le85frD93ng" from this download you take only the RecoveryInstaller_PX30.apk file. Put it in your android and make the install and run. Now you automatic reboot in recovery mode for android 9, you select update software(the second point) you select from usb or sd card an android 9 rom that you have download from Yandex (tps://yadi.sk/d/umCvHqCDzHccr/RockChip%20PX30%20%20Android%209, i take the ota version in main folder) and start the installation (long time) and important when the installation is finish the system return in recovery data, you must select WIPE DATA and apply. And the system restart with android 9.
I just did it now and it worked. My radio is an isudar px30. Good job
Click to expand...
Click to collapse
Hi everyone. Me too.. I'm trying to update my radio Eonon GA9253B. I've tried with your method but I have this error:
"Failed to update system image"
My radio have this version of Android 8.0
PX30 8.1.0 OPM8 181105.002 eng.hct 20181229.163118
So I've tried to install this version of Android 9.0:
HCT_PX30_9.0(20191218)
Because thinking was the right one for HCT build.
Can you help me to download the right one? I'd like to install a normal version, not a modded one.. thank you!
Greetings from Italy
Hi
Bought My car stereo from autostereo.com.ca for Volvo.
Have been happy with it and No problems.
But need some help as i tried to update it from
Android 8.1 to 9.0 and now it only erase and factory reset and keep ON loop.
I installer update_Malay_Mod_PX30_v_1.0_Pie_9_0_LITE_Version
And update mtce as IT Said it was 3.10 But when it installer it Said 2.5.
So need help how to get passe the loop the player is doing, IT is Px30.
Please appriciate all help i can get..
Info build and Mtc
Mtce KSP v. 3.05_1
PX30 8.1. 0 OPM8. 1811. 05. 002 eng. HTC. 20181228. 215907
Kindly regards
Alexander
Alex639 said:
Hi everyone. Me too.. I'm trying to update my radio Eonon GA9253B. I've tried with your method but I have this error:
"Failed to update system image"
My radio have this version of Android 8.0
PX30 8.1.0 OPM8 181105.002 eng.hct 20181229.163118
So I've tried to install this version of Android 9.0:
HCT_PX30_9.0(20191218)
Because thinking was the right one for HCT build.
Can you help me to download the right one? I'd like to install a normal version, not a modded one.. thank you!
Greetings from Italy
Click to expand...
Click to collapse
you need to download this apk "RecoveryInstaller_PX30.apk" ,
after this you can install the version of android 9 you prefer. Basically what I understood is that every recovery is tied to an android version. With Recovery 9 you can install android 9. Try to re-read the post I wrote above. I haven't installed a mod. version, of the mod version I only took the file with the recovery of android 9!
nanoalieno said:
Hi Friends i spent this quarantena coronavirus day to upgrate my px30 android 8.1 in android 9.0!
In the url you have to add "ht".
To do this you need to install the recovery tool of android 9, it's simple you need to download this apk "RecoveryInstaller_PX30.apk" I found this apk in "tps://yadi.sk/d/Qx8le85frD93ng" from this download you take only the RecoveryInstaller_PX30.apk file. Put it in your android and make the install and run. Now you automatic reboot in recovery mode for android 9, you select update software(the second point) you select from usb or sd card an android 9 rom that you have download from Yandex (tps://yadi.sk/d/umCvHqCDzHccr/RockChip%20PX30%20%20Android%209, i take the ota version in main folder) and start the installation (long time) and important when the installation is finish the system return in recovery data, you must select WIPE DATA and apply. And the system restart with android 9.
I just did it now and it worked. My radio is an isudar px30. Good job
Click to expand...
Click to collapse
Hi,
Is the firmware version important for recovery?
I mean I have a device with MTCD_LM instead of MTCE_GS
greetings Dimes
Dr.Dimes said:
Hi,
Is the firmware version important for recovery?
I mean I have a device with MTCD_LM instead of MTCE_GS
greetings Dimes
Click to expand...
Click to collapse
The firmware version is better respected, this procedure should be used if you want to switch from an Android 8 firmware to an Android 9 firmware. If you change the firmware version but remain in the same android the procedure is not this but another, more Simple! As for your question, it is better to respect the version you may have malfunctioning!
I tried today to update my MTCE_LM Unit from 8.1 to 9.0 with the proceed above, so I downloaded the ROmfile for the LM Unit_ota9.0 from yandex server.
I’m stuck on boot loop now.
The Unit try’s to boot up and the error with can’t boot try again or make wipe data pops up. Tried both options with no luck.
I have the possibility to go into recovery but the recovery is 8.1.3 and I think not possible anymore to load recovery 9.0 from this apk File explained above.
Is there any solution to get my unit updated?
I tried the 8.1 LM_Rom from yandex with no luck.
My Unit is a Xrross with px30 MTCE_LM. 3.01 DCMU.
I updated the LM_MCU to 3.37 with success, bevor I start flashing.
I went to 8.1 and used RecoveryInstaller PX30, it gave the Android 9 recovery but no update.zip work. They all say E1001 Failed to update system image. Status 7
I have MTCE CHS android 8.1. The MCU upgrade was successful to CHS 3.40. But while updating the rom to 9.0 it crashes. What am I doing wrong?
View attachment 5046993
Wysłane z mojego SM-N970F przy użyciu Tapatalka
Hi, it´s not able to do this update without the special APK for the Recovery Update.
The 8.1 blocks the Update with Status E7. So the internal Check fails. Maybe it works if you signed the File itself, Maybe not.
So look in the Forum for this APK-Tool. Xou have to Pay 10-20 Bucks and send your Serialnumber.
greetings Dimes
nanoalieno said:
Hi Friends i spent this quarantena coronavirus day to upgrate my px30 android 8.1 in android 9.0!
In the url you have to add "ht".
To do this you need to install the recovery tool of android 9, it's simple you need to download this apk "RecoveryInstaller_PX30.apk" I found this apk in "tps://yadi.sk/d/Qx8le85frD93ng" from this download you take only the RecoveryInstaller_PX30.apk file. Put it in your android and make the install and run. Now you automatic reboot in recovery mode for android 9, you select update software(the second point) you select from usb or sd card an android 9 rom that you have download from Yandex (tps://yadi.sk/d/umCvHqCDzHccr/RockChip%20PX30%20%20Android%209, i take the ota version in main folder) and start the installation (long time) and important when the installation is finish the system return in recovery data, you must select WIPE DATA and apply. And the system restart with android 9.
I just did it now and it worked. My radio is an isudar px30. Good job
Click to expand...
Click to collapse
Hi, exactly which package did you install (GS, HCT, LM, OLS, etc.) and which release (date)? Because I tried all the HCT files and I can't update, I'm always stuck on Android 8.1 with this version HCT4_px30_8.1_IMG (20181225)