Related
For people, who flashed fRomFuture - NewWorld V2 on AL10 for getting rid of the chinese stuff, and want to get back to stock rom:
1. Stock Recovery is needed!
2. download the file
3. unzip it and copy update.app from the zip into your dload-folder on your sdcard
4. dial *#*#2846579#*#*
5. in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade
6. device will reboot and start flashing
Download
Mirror
raider2k9 said:
For people, who flashed fRomFuture - NewWorld V2 on AL10 for getting rid of the chinese stuff, and want to get back to stock rom:
1. Stock Recovery is needed!
2. download the file
3. unzip it and copy dload file to sdcard
4. dial *#*#2846579#*#*
5. in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade
6. device will reboot and start flashing
Download
Mirror
Click to expand...
Click to collapse
Thanks, does it matter that I re-branded my phone using Paul's L09 update?
Milamber said:
Thanks, does it matter that I re-branded my phone using Paul's L09 update?
Click to expand...
Click to collapse
you can only try, but I think it should work, cause it´s an real AL10 rom for the real AL10.. or did you change something in the oeminfo so that it is recognized as L09?
am following nthe instructions as displayed in the OP but upon unzipping the file there is no 'dload' file available...any help please
1. Stock Recovery is needed!
2. download the file
3. unzip it and copy dload file to sdcard
4. dial *#*#2846579#*#*
5. in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade
6. device will reboot and start flashing
have also followed these instructions which advise to not unzip...?
http://www.huaweiblog.de/downloads/huawei-p9-firmware-update-b166-ota/
mrsim said:
am following nthe instructions as displayed in the OP but upon unzipping the file there is no 'dload' file available...any help please
1. Stock Recovery is needed!
2. download the file
3. unzip it and copy dload file to sdcard
4. dial *#*#2846579#*#*
5. in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade
6. device will reboot and start flashing
have also followed these instructions which advise to not unzip...?
http://www.huaweiblog.de/downloads/huawei-p9-firmware-update-b166-ota/
Click to expand...
Click to collapse
Unzip it and put the update.app file in dload folder on sd card.
Thanks, been looking for this...
Sent from my NEXT using Tapatalk
Mostar088 said:
Unzip it and put the update.app file in dload folder on sd card.
Click to expand...
Click to collapse
and then after i do this what's next please...do i leave the .zip file in the same dload folder on my ex sd card and then follow the instructions as stated
mrsim said:
and then after i do this what's next please...do i leave the .zip file in the same dload folder on my ex sd card and then follow the instructions as stated
Click to expand...
Click to collapse
No, just the file update.app then dial *#*#2846579#*#*
in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade.
Mostar088 said:
No, just the file update.app then dial *#*#2846579#*#*
in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade.
Click to expand...
Click to collapse
I updated the instructions
can you believe after all that the OTA came through today in the UK...LOL...but thanks again for posting and helping...much appreciated by all i am sure....
EVA-AL10 to EVA-L29
Hey guys,
I am really sorry for the dumb question... I want to get rid of all chinese stuff in my phone (EVA-AL10, currently my device is on C00B183).
I already downloaded the SRK tool and have the EVA-L29C636B136 version downloaded from stock ROM thread.
Which oeminfo may I flash in my phone with the tool?
After flash EVA-L29C636B136 I will receive the last update by OTA or need to download the last version in stock rom thread and do it manually?
Can I up this ROM for EVA-L19 ?? thanks
In twrp i've made a mistake: i've done an advanced format (wipe), so now i cannot boot the phone anymore (the phone is stuck at the cyan honor logo)
I can enter in twrp.
What can i do?
Please help!
Thanks!
Flash stock recovery and download last firmware in sd / dload folder then force update (pow+volume rockers both)
VenuGopalu said:
Flash stock recovery and download last firmware in sd / dload folder then force update (pow+volume rockers both)
Click to expand...
Click to collapse
It is mandatory to have an external sd card? Or can i put the dload folder in internal storage?
Thanks
mandelbort said:
It is mandatory to have an external sd card? Or can i put the dload folder in internal storage?
Thanks
Click to expand...
Click to collapse
Dload always with external sd card
Do not try to use it with the internal
Search for the rollback package
Just simply download your device last firmware and extract the following with Huawei update extrator
1.boot .img
2.cust.img
3.recovery.img
4.system.img
5.userdata.img
Then boot your device into fastboot ,open adb command then flash
1.fastboot flash boot boot.img
2.fastboot flash cust cust.img
3.fastboot flash recovery recovery.img
4.fastboot flash system system.img
5.fastboot flash userdata userdata.img
Then 6. fastboot reboot
your device will go on reboot .
That's it back to normal
YES
mandelbort said:
It is mandatory to have an external sd card? Or can i put the dload folder in internal storage?
Thanks
Click to expand...
Click to collapse
yes it is
VenuGopalu said:
Just simply download your device last firmware and extract the following with Huawei update extrator
1.boot .img
2.cust.img
3.recovery.img
4.system.img
5.userdata.img
That's it back to normal
Click to expand...
Click to collapse
Thank you; and others img's are useless?
So, i managed to flash nougat by this links
http://www.stechguide.com/honor-8-b360-nougat-update/
1. Update.zip
2. Update_data_full_hw_eu.zip
putting the various files in the dload folder.
The first update.zip succedeed; but rebooting the system and making first configuration, i see that the os lacks on many apps (no keyboard!).
Trying to update with Update_data_full_hw_eu.zip i get incompatible firmware.
So my idea was to flash the original stock rom (android 6); i downloaded it on
http://www.stechguide.com/honor-8-b360-nougat-update/
and put everything in the dload folder.
But this time erecovery says to me "software installation failed, incompatibility with current version"
Any clue?
Thanks again
Follow the given thread video tutorial also given
mandelbort said:
So, i managed to flash nougat by this links
http://www.stechguide.com/honor-8-b360-nougat-update/
1. Update.zip
2. Update_data_full_hw_eu.zip
putting the various files in the dload folder.
The first update.zip succedeed; but rebooting the system and making first configuration, i see that the os lacks on many apps (no keyboard!).
Trying to update with Update_data_full_hw_eu.zip i get incompatible firmware.
So my idea was to flash the original stock rom (android 6); i downloaded it on
http://www.stechguide.com/honor-8-b360-nougat-update/
and put everything in the dload folder.
But this time erecovery says to me "software installation failed, incompatibility with current version"
Any clue?
Thanks again
Click to expand...
Click to collapse
just simply follow my instructions to get normal stock rom
https://forum.xda-developers.com/honor-8/how-to/video-guide-honor-8-unbricking-relock-t3554579
YOUTUBE TUTORIAL :::: https://youtu.be/OMKDnBqbi3U
My phone is dead in water.. I have TWRP that complains that the system partition is read only,
I have erecovery that cannot says "getting package info failed" (dies afer "getting package info from server"), and manual downloading of image 138 putting it in dload folder of SDCARD did not go -- it complained that it was not the right version I think..
What can I do now? I thought that I ought to restore the recovery partition, but I can't seem to find it anywhere..
I'm going nuts here
HELP!!
PS: I have been downloading the firmwares from http://hwmt.ru/oth/HWFF/info/view.php?find_model=mha , they have two sets: Do I need the OTA or the FULL version to be put into SDCARD's "dload" folder?
You need the FULL version. OTA means "over the air update", and is meant to be applied from a specific version to bring you to a newer version without having to download everything.
tkalfaoglu said:
My phone is dead in water.. I have TWRP that complains that the system partition is read only,
I have erecovery that cannot says "getting package info failed" (dies afer "getting package info from server"), and manual downloading of image 138 putting it in dload folder of SDCARD did not go -- it complained that it was not the right version I think..
What can I do now? I thought that I ought to restore the recovery partition, but I can't seem to find it anywhere..
I'm going nuts here
HELP!!
PS: I have been downloading the firmwares from http://hwmt.ru/oth/HWFF/info/view.php?find_model=mha , they have two sets: Do I need the OTA or the FULL version to be put into SDCARD's "dload" folder?
Click to expand...
Click to collapse
well this is a long shot,try to unlock ur BL again.after that try to boot into twrp.and for now only L29C636 n AL00C00 have offline update files that can be flash thru dload folder.
edit-if you need stock recovery actually u can downlaod the full fw of your build and extract update.app using huawei extractor and flash the recovery.img thru twrp or adb
If you can, try firmware finder. For that to work your phone must boot. Or you can go with FunkyHuawei, but that costs money to use.
Both requires stock recovery to install though. And as @eddmecha says, only 2 builds are offline installable.
The system being read only in TWRP is normal as its added as RO in fstab. And if you have dm-verity enabled its no point in installing anything to /system.
>well this is a long shot,try to unlock ur BL again.after that try to boot into twrp.and for now >only L29C636 n AL00C00 have offline update files that can be flash thru dload folder.
>edit-if you need stock recovery actually u can downlaod the full fw of your build and >extract update.app using huawei extractor and flash the recovery.img thru twrp or adb
Thank you very much; however, there is a problem with the huawei extractor: The extractor works and creates unknown_nn.img files, and there is another script, HuaweiFinder or something that renames them by guessing their contents. I have the "unknown" files, but that renaming script no longer works -- (it dies with FINDSTR errors).
So I can't find the recovery.. perhaps someone could do a "strings recovery.img" and tell me what I suppose to see in there, so I can do the same search amongs my unknown_nn.img files.. Many thanks! -t
eddmecha said:
well this is a long shot,try to unlock ur BL again.after that try to boot into twrp.and for now only L29C636 n AL00C00 have offline update files that can be flash thru dload folder.
edit-if you need stock recovery actually u can downlaod the full fw of your build and extract update.app using huawei extractor and flash the recovery.img thru twrp or adb
Click to expand...
Click to collapse
I am right now trying to do that -- to fix the recovery to stock, so that eRecovery will let me recover anything!
But can't find it amongst the extracted "unknown_file.nn" files ..
tkalfaoglu said:
I am right now trying to do that -- to fix the recovery to stock, so that eRecovery will let me recover anything!
But can't find it amongst the extracted "unknown_file.nn" files ..
Click to expand...
Click to collapse
from whr did u download the huawei extractor?
https://forum.xda-developers.com/showthread.php?t=2433454
is it this one?
eddmecha said:
from whr did u download the huawei extractor?
https://forum.xda-developers.com/showthread.php?t=2433454
is it this one?
Click to expand...
Click to collapse
I totally forgot about that one! I instead had used the one that required Perl..
I'm downloading and working on it now; many thanks!!
-t
UPDATE: After removing TWRP (with tears in my eyes) with:
sudo fastboot flash recovery RECOVERY.img
I was able to get my phone back.. It works now!
Hi,
I have a Mate 9 , Build No. MHA-L09C432B182
Baseband is 21.516.00.00.010
Kernel: 4.1.18-g0ad0fb3
I unlocked bootloader, it is defenetely unlocked. I am able to install TWRP.
I installed twrp-3.0.2 and also twrp-3.1.0 versions but have same problems in both versions:
filenames/folder names in /sdcard (internal storage) are broken, I mean their original names are gone, all files and folders are named like imbj9yf1fATc4Tvm5zt+ and so on instead of Screenshots for example.
So I cannot find my supersu.zip but however I think it would not install, because of this error:
Also I cannot run a TWRP backup, it shows:
Backup started
Backup Folder /data/media/0/TWRP/Backups/UGM2171100001069/2017-07-21-13-11-39_NRD90M...
Can not create '/data/media/0/TWRP' folder (Permission denied)
Failed to make backup folder
I tried to CHMOD 755 this folder/path, did not work/help
Can anybody help me here?
Thx and best!
/data is encrypted by default using file based encryption. That's why you see those files in /sdcard (/data/media/0/). You can remove encryption by using Wipe - 'Format Data' button.
This will remove everything in /data including your files in /sdcard.
To flash stuff you can use an external SD card or remove encryption or flash this twrp: https://mega.nz/#!xg9hWbpJ!dNOWJVUuD_4JL8N8PiDXYsj3SnvaOfKxBndvWc_4wgo
and adb push (adb push file.zip /cache/file.zip) to /cache and flash from there. /cache is added as storage with that twrp.
If you want to remove encryption, flash official SuperSU 2.82 SR1: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Or Magisk 13.3: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Both require at least twrp 3.1.0.
If you chose to remove encryption you will also have to flash public and HW zips after Format Data, because files in /data/hw_init are removed which are needed for themes to work and 'System Update' and a few Huawei apps.
Public zip for L09C432B182:
http://update.hicloud.com:8180/TDS/...55/f1/full/public/update_data_full_public.zip
Hw zip for L09C432B182: http://update.hicloud.com:8180/TDS/...04/v84355/f1/full/hw/eu/update_full_hw_eu.zip
Flash public first then hw. Both will give errors but install fine.
If you don't want to remove encryption you won't be able to backup /data.
If so use this SuperSU: https://mega.nz/#!18FW1QTQ!3DCA3KrIUSRqEu4L-expci4HcKtk6F25fE1u6ecJV9Q
Or magisk 13.3: https://mega.nz/#!I4FQzbyA!gBZelHmD3lGGwzGISUXkf7GQTUAq5i785d_qPHQOaVE
thanks for all your info.
Can you suggest what to do? Acutually I just want to install root to get titanium to work because I have older backups I want to look into to. After that I want to unroot again.
Not sure if i need encryption or if ishould decrypt now
Whats the best way for me now?
ante0 said:
/data is encrypted by default using file based encryption. That's why you see those files in /sdcard (/data/media/0/). You can remove encryption by using Wipe - 'Format Data' button.
This will remove everything in /data including your files in /sdcard.
To flash stuff you can use an external SD card or remove encryption or flash this twrp: https://mega.nz/#!xg9hWbpJ!dNOWJVUuD_4JL8N8PiDXYsj3SnvaOfKxBndvWc_4wgo
and adb push (adb push file.zip /cache/file.zip) to /cache and flash from there. /cache is added as storage with that twrp.
If you want to remove encryption, flash official SuperSU 2.82 SR1: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Or Magisk 13.3: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Both require at least twrp 3.1.0.
If you chose to remove encryption you will also have to flash public and HW zips after Format Data, because files in /data/hw_init are removed which are needed for themes to work and 'System Update' and a few Huawei apps.
Public zip for L09C432B182:
http://update.hicloud.com:8180/TDS/...55/f1/full/public/update_data_full_public.zip
Hw zip for L09C432B182: http://update.hicloud.com:8180/TDS/...04/v84355/f1/full/hw/eu/update_full_hw_eu.zip
Flash public first then hw. Both will give errors but install fine.
If you don't want to remove encryption you won't be able to backup /data.
If so use this SuperSU: https://mega.nz/#!18FW1QTQ!3DCA3KrIUSRqEu4L-expci4HcKtk6F25fE1u6ecJV9Q
Or magisk 13.3: https://mega.nz/#!I4FQzbyA!gBZelHmD3lGGwzGISUXkf7GQTUAq5i785d_qPHQOaVE
Click to expand...
Click to collapse
thanks for all your info.
Can you suggest what to do? Acutually I just want to install root to get titanium to work because I have older backups I want to look into to. After that I want to unroot again.
Not sure if i need encryption or if ishould decrypt now
Whats the best way for me now?
tobyffm said:
thanks for all your info.
Can you suggest what to do? Acutually I just want to install root to get titanium to work because I have older backups I want to look into to. After that I want to unroot again.
Not sure if i need encryption or if ishould decrypt now
Whats the best way for me now?
Click to expand...
Click to collapse
Then don't bother with decryption.
So you basically just have to place the root of your choice (of the mega ones I linked, because the official ones will remove encryption in your boot image and you will boot loop if you flash the official ones) on an external SD or transfer to /cache with adb after flashing the linked twrp. Then flash root and you're good to go.
I think you can sideload root zip, I haven't tried it. But that's another possibility if you don't have an external SD.
ante0 said:
Then don't bother with decryption.
So you basically just have to place the root of your choice (of the mega ones I linked, because the official ones will remove encryption in your boot image and you will boot loop if you flash the official ones) on an external SD or transfer to /cache with adb after flashing the linked twrp. Then flash root and you're good to go.
I think you can sideload root zip, I haven't tried it. But that's another possibility if you don't have an external SD.
Click to expand...
Click to collapse
Yes, it worked, i flashed supersu and got root acccess now, thx very much.
About unrooting later on, i understand I need to download the full stock rom, create a dload folder and copy update.app into it and reboot phone to download mode. It then will install stock rom and stock recovery, correct?
Will this erase internal storage again same like when unlocking bootloader?
thx!
tobyffm said:
Yes, it worked, i flashed supersu and got root acccess now, thx very much.
About unrooting later on, i understand I need to download the full stock rom, create a dload folder and copy update.app into it and reboot phone to download mode. It then will install stock rom and stock recovery, correct?
Will this erase internal storage again same like when unlocking bootloader?
thx!
Click to expand...
Click to collapse
No need (dload doesn't work anyway, except for AL00C00B115 and L29C636B136). You can uninstall using the SuperSU app or manually by removing /data/SuperSU.apk and restoring stock boot image. Boot image can be extracted from update.app for your model using Huawei Update extractor. Same goes for recovery. If you want to lock bootloader you have to install an update/same build number, you could use Firmware Finder for that or this tool: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
In my experience it will not remove apps, but data seems to go poof (as in app settings and data). Unlocking bootloader again will remove apps though as it does a factory reset.
ante0 said:
/data is encrypted by default using file based encryption. That's why you see those files in /sdcard (/data/media/0/). You can remove encryption by using Wipe - 'Format Data' button.
This will remove everything in /data including your files in /sdcard.
To flash stuff you can use an external SD card or remove encryption or flash this twrp: https://mega.nz/#!xg9hWbpJ!dNOWJVUuD_4JL8N8PiDXYsj3SnvaOfKxBndvWc_4wgo
and adb push (adb push file.zip /cache/file.zip) to /cache and flash from there. /cache is added as storage with that twrp.
If you want to remove encryption, flash official SuperSU 2.82 SR1: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Or Magisk 13.3: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Both require at least twrp 3.1.0.
If you chose to remove encryption you will also have to flash public and HW zips after Format Data, because files in /data/hw_init are removed which are needed for themes to work and 'System Update' and a few Huawei apps.
Public zip for L09C432B182:
http://update.hicloud.com:8180/TDS/...55/f1/full/public/update_data_full_public.zip
Hw zip for L09C432B182: http://update.hicloud.com:8180/TDS/...04/v84355/f1/full/hw/eu/update_full_hw_eu.zip
Flash public first then hw. Both will give errors but install fine.
If you don't want to remove encryption you won't be able to backup /data.
If so use this SuperSU: https://mega.nz/#!18FW1QTQ!3DCA3KrIUSRqEu4L-expci4HcKtk6F25fE1u6ecJV9Q
Or magisk 13.3: https://mega.nz/#!I4FQzbyA!gBZelHmD3lGGwzGISUXkf7GQTUAq5i785d_qPHQOaVE
Click to expand...
Click to collapse
hi,
thx for your last reply!
I am still on root status. I needed to decrypt now, thus I selected format data.
After that, files and folders are named correctly and I am able to create a backup.
I flashed public ziip, the other one was corrupt, mayve because of failed download, however as I understand it is not the reason why it always goes back to encryption, isn't it?
But: Once I reboot to Android and go back to recovery it is encrypted again?
My current problem is: I need to move a TWRP backup to internal storage and run TWRP restore feature from recovery, but it is encrypted. Once I format data it is decrypted but internal storage empty again. So I reboot to Android (because mounting from within TWRP does not work )and put TWRP backup folder to internsal storage, but then I go back to recovery and see it is encrypted again :S like driving in a circle ...
And I cannot put backup folder to external micro sd as it is too large for my small micro sd I have.
Do I need to flash a decrypted bootimage? If yes, which one?
Can you help me on this maybe?
tobyffm said:
hi,
thx for your last reply!
I am still on root status. I needed to decrypt now, thus I selected format data.
After that, files and folders are named correctly and I am able to create a backup.
I flashed public ziip, the other one was corrupt, mayve because of failed download, however as I understand it is not the reason why it always goes back to encryption, isn't it?
But: Once I reboot to Android and go back to recovery it is encrypted again?
My current problem is: I need to move a TWRP backup to internal storage and run TWRP restore feature from recovery, but it is encrypted. Once I format data it is decrypted but internal storage empty again. So I reboot to Android (because mounting from within TWRP does not work )and put TWRP backup folder to internsal storage, but then I go back to recovery and see it is encrypted again :S like driving in a circle ...
And I cannot put backup folder to external micro sd as it is too large for my small micro sd I have.
Do I need to flash a decrypted bootimage? If yes, which one?
Can you help me on this maybe?
Click to expand...
Click to collapse
'Format Data', flash official Magisk 13.3 or SuperSU 2.82 SR1 (mine from mega doesn't remove encryption), flash public zip, flash HW zip. It should now stay decrypted. You might have to go back to TWRP start screen after Format, then select 'Reboot' - 'Reboot Recovery' if it doesn't want to mount /data after Format.
Rebooting to system after formatting but not flashing magisk or supersu will encrypt again.
I can make a decrypted boot image if it doesn't want to stay decrypted.
ante0 said:
'Format Data', flash official Magisk 13.3 or SuperSU 2.82 SR1 (mine from mega doesn't remove encryption), flash public zip, flash HW zip. It should now stay decrypted. You might have to go back to TWRP start screen after Format, then select 'Reboot' - 'Reboot Recovery' if it doesn't want to mount /data after Format.
Rebooting to system after formatting but not flashing magisk or supersu will encrypt again.
I can make a decrypted boot image if it doesn't want to stay decrypted.
Click to expand...
Click to collapse
ok thx.
I redownloaded HW zip and checked md5 sum with the file from first attempt, same md5. However this is what i did:
Format data, tried to flash Magisk, but did not work, there was an error, this is why I flashed SuperSU 2.82 SR1 which worked with no errors. I flashed public zip right away, after that I flashed HW zip, but again, it did not work there were errors. However, encryption seems to be gone anyway. and yes, it keeps being decrypted.
I managed to get TWRP seeing an old TWRP Backup, which I pushed onto internal storage. I started restore of /data/ of that TWRP backup because I want to get the WhatsApp incl. data from data backup.
I booted up to Android and now I am faced with the next fuc*in problem: lock pattern of Dec 16. I cant remember and after few attemps devices is locked for 10 minutes, then for another 30 minutes ...
After google research it should be able to use Android device manager from a browser and to lock device and set a new pin/password to unlock the device. It is communicating as I can let the phone ring with no problem, but all how_tos show me this screen in android device manager interface
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Of course it is me, who dont get this mask to set a new pin/password ( (
I only can enter an optional phone no and message from browser
Any idea what to do?
Update: I extracted whatsapp from backup with nandroid manager app but it did not restore my data correctly, best way would be to get done the pattern problem when restopring the twrp backup
redaring locking bootloader again:
I went to your link https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
they say to download file for own device here: http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=
I only find:
DUK-L09C432B182
But mine is MHA-L09C432B182, can I go forward with DUK-L09C432B182 anyway? Actually I dont understand what to do, their description is curios.
tobyffm said:
ok thx.
I redownloaded HW zip and checked md5 sum with the file from first attempt, same md5. However this is what i did:
Format data, tried to flash Magisk, but did not work, there was an error, this is why I flashed SuperSU 2.82 SR1 which worked with no errors. I flashed public zip right away, after that I flashed HW zip, but again, it did not work there were errors. However, encryption seems to be gone anyway. and yes, it keeps being decrypted.
I managed to get TWRP seeing an old TWRP Backup, which I pushed onto internal storage. I started restore of /data/ of that TWRP backup because I want to get the WhatsApp incl. data from data backup.
I booted up to Android and now I am faced with the next fuc*in problem: lock pattern of Dec 16. I cant remember and after few attemps devices is locked for 10 minutes, then for another 30 minutes ...
After google research it should be able to use Android device manager from a browser and to lock device and set a new pin/password to unlock the device. It is communicating as I can let the phone ring with no problem, but all how_tos show me this screen in android device manager interface
Of course it is me, who dont get this mask to set a new pin/password ( (
I only can enter an optional phone no and message from browser
Any idea what to do?
Update: I extracted whatsapp from backup with nandroid manager app but it did not restore my data correctly, best way would be to get done the pattern problem when restopring the twrp backup
redaring locking bootloader again:
I went to your link https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
they say to download file for own device here: http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=
I only find:
DUK-L09C432B182
But mine is MHA-L09C432B182, can I go forward with DUK-L09C432B182 anyway? Actually I dont understand what to do, their description is curios.
Click to expand...
Click to collapse
L09C432B156 firmware: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1366/g104/v84355/f1/full/update.zip
L09C432B182 public data zip:
http://update.hicloud.com:8180/TDS/...55/f1/full/public/update_data_full_public.zip
L09C432B182 hw data zip:
http://update.hicloud.com:8180/TDS/...04/v84355/f1/full/hw/eu/update_full_hw_eu.zip
You might as well update to B190 while you're at it..
L09C432B190: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1366/g104/v89786/f1/full/update.zip
L09C432B190 public data zip:
http://update.hicloud.com:8180/TDS/...86/f1/full/public/update_data_full_public.zip
L09C432B190 hw data zip: http://update.hicloud.com:8180/TDS/...l/MHA-L09_hw_eu/update_full_MHA-L09_hw_eu.zip
Rename public data zip to update_data_public.zip.
Rename hw data zip to update_all_hw.zip
ok, to summarize:
1) I download these 3 files:
full update.zip:
L09C432B190: http://update.hicloud.com:8180/TDS/d...ull/update.zip
L09C432B190 public data zip:
http://update.hiclod.com:8180/TDS/d...ull_public.zip
L09C432B190 hw data zip:
http://update.hicloud.com:8180/TDS/d...-L09_hw_eu.zip
2) I extract recovery img file from update zip
3) I uninstall root from within super su app.
4) I rename zip files and flash public zip as well as hw zip from within twrp recovery
5) i put extraced recovery img to device by using "fastboot flash recovery "
Will it work like this? Or do I need to flash public and hw first and after that uninstall root from supersu?
and then in the end "fastboot oem lock" ? to get the bootloader locked and to switch off the boot message "your device cant be trusted" ?
and: I couldnt flash hw zip before as it ended up with errrors, is this why I dont have Search for updates in EMUI 5.0 anymore?
tobyffm said:
ok, to summarize:
1) I download these 3 files:
full update.zip:
L09C432B190: http://update.hicloud.com:8180/TDS/d...ull/update.zip
L09C432B190 public data zip:
http://update.hiclod.com:8180/TDS/d...ull_public.zip
L09C432B190 hw data zip:
http://update.hicloud.com:8180/TDS/d...-L09_hw_eu.zip
2) I extract recovery img file from update zip
3) I uninstall root from within super su app.
4) I rename zip files and flash public zip as well as hw zip from within twrp recovery
5) i put extraced recovery img to device by using "fastboot flash recovery "
Will it work like this? Or do I need to flash public and hw first and after that uninstall root from supersu?
and then in the end "fastboot oem lock" ? to get the bootloader locked and to switch off the boot message "your device cant be trusted" ?
and: I couldnt flash hw zip before as it ended up with errrors, is this why I dont have Search for updates in EMUI 5.0 anymore?
Click to expand...
Click to collapse
No. Follow the guide you linked, that's where you use those files.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
You could relock but it will say Bootloader Relocked instead of Bootloader Lock.
And if you don't plan on updating to B190 using the guide I suggest you download public and HW Data for B182 and flash those in twrp.
Can cause problems otherwise.
Flash public first. They will give errors because you're not supposed to flash them in twrp, they're official Huawei zips that are flashed using stock recovery.
ante0 said:
No. Follow the guide you linked, that's where you use those files.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
You could relock but it will say Bootloader Relocked instead of Bootloader Lock.
And if you don't plan on updating to B190 using the guide I suggest you download public and HW Data for B182 and flash those in twrp.
Can cause problems otherwise.
Flash public first. They will give errors because you're not supposed to flash them in twrp, they're official Huawei zips that are flashed using stock recovery.
Click to expand...
Click to collapse
OK and why i currently dont see menue point "search for updates" in EMUI 5.0 ? Maybe i will stay rooted as I see that xposed has now been released.
But I want to receive official OTAs anyway, but currently the full menue point for searching for updates is gone. Any idea?
tobyffm said:
OK and why i currently dont see menue point "search for updates" in EMUI 5.0 ? Maybe i will stay rooted as I see that xposed has now been released.
But I want to receive official OTAs anyway, but currently the full menue point for searching for updates is gone. Any idea?
Click to expand...
Click to collapse
Did you flash back public and HW Data for B182?
ante0 said:
Did you flash back public and HW Data for B182?
Click to expand...
Click to collapse
I was not sure which was the last I flashed during last days, B182 or B190.
However, just redownload B182 files and flashed, first public, then hw zip.
Rebooted device, "search for updates" is available again, thank you very much
But it says B182 is latest update, so OTA not available for me so far yet. How can I manually flash to latest version B190 without loosing 'Search for Update' section?
tobyffm said:
I was not sure which was the last I flashed during last days, B182 or B190.
However, just redownload B182 files and flashed, first public, then hw zip.
Rebooted device, "search for updates" is available again, thank you very much
But it says B182 is latest update, so OTA not available for me so far yet. How can I manually flash to latest version B190 without loosing 'Search for Update' section?
Click to expand...
Click to collapse
You can with that guide i linked a couple of posts back. You can't flash update.zip in twrp, you have to use that guide to flash it. It's pretty straightforward. Download HWOTA BASE, HWOTA WINDOWS and HWOTA MHA (Mate 9), extract all to the same folder (C:\hwota is a good location). Download the files for B190 i linked a couple of posts back. Rename public data zip to update_data_public.zip.
Rename hw data zip to update_all_hw.zip, place them and update.zip in the update folder, run bat (if windows) or sh (Linux) then do what the prompts say. When it asks pick same brand update, then script update folder. It will transfer files for you. Bootloader will be locked when you're done.
ante0 said:
You can with that guide i linked a couple of posts back. You can't flash update.zip in twrp, you have to use that guide to flash it. It's pretty straightforward. Download HWOTA BASE, HWOTA WINDOWS and HWOTA MHA (Mate 9), extract all to the same folder (C:\hwota is a good location). Download the files for B190 i linked a couple of posts back. Rename public data zip to update_data_public.zip.
Rename hw data zip to update_all_hw.zip, place them and update.zip in the update folder, run bat (if windows) or sh (Linux) then do what the prompts say. When it asks pick same brand update, then script update folder. It will transfer files for you. Bootloader will be locked when you're done.
Click to expand...
Click to collapse
Did like described, when it comes to "update should install automatically" it reboots into erecovery, but Software install failed!
The update package does not exists please download the package again
But all 3 files are within the script folder and named correctly i think, pls see my attached screenshot
tobyffm said:
Did like described, when it comes to "update should install automatically" it reboots into erecovery, but Software install failed!
The update package does not exists please download the package again
But all 3 files are within the script folder and named correctly i think, pls see my attached screenshot
Click to expand...
Click to collapse
Are they in the update folder? I think I see the update.bat file there.
Put them in the update folder (for example c:\hwota\update\)
ante0 said:
Are they in the update folder? I think I see the update.bat file there.
Put them in the update folder (for example c:\hwota\update\)
Click to expand...
Click to collapse
yes, that was my fault.
Put to update folder and run again, update was running and finished with 100%. phone rebooted loaded very long. Now android is broken. I see my background image, but cannot do anything it is like hanging hanging hanging, everyhting very slow, like it is loading much of information. rebooted phone and waited some more time. seems now it is working and I am on B190. Now, i have to unlock bootloader again and install supersu again =)
thx for your help so far.
btw: u dont have any solution for my previous posted problem with my twrp backup, dont you? restoring twrp backup ends up in lock screen with pattern which I cant remember. Android Device Manager from PC browser can communictae with the phone but it does not offer me to set a new pin. Do you have any other method in mind how I can go on?
If you have unlocked bootloader and TWRP, you can flash a newer firmware using HuRUpdater
This steps can be risky for your device if you don't know what you are doing, so try to read some guide about flashing first
before attempt these operations if you are a new to these things.
I don't take any responsability of catastrophic failures and loss of data.
-- I did a titanium backup before the upgrade, but in my case no restore was needed as all data were retained.
In this simple update no factory reset was triggered.
Please read the HUrupdater thread also for more informations.
- Install Unofficial TWRP by Pretoriano80
- Download HuRUpdater 0.3 and put it in a folder in your sdcard
-Search the firmware for your device with Firmware Finder
Make sure you download the correct firmware version for your device (type, region code)
wrong firmware can brick your device
I used updated firmware files APPROVED for my device checked with firmware finder app.
I don't know if flashing NOT APPROVED files will harm your device. You have been warned.
I successfully updated my device from CLT-L29C636B130 to CLT-L29C636B131
***Don't try to rebrand your phone with this method***
- Use FullOTA-MF images of the firmware and download the 3 files needed
in my case:
update.zip
update_data_full_public.zip
update_full_CLT-L29_hw_spcseas.zip
- rename the 3 files to:
update.zip
update_data_public.zip
update_all_hw.zip
and put the files in the same folder with HuRUpdater 0.3
(optional)
- The Update will overwrite your TWRP custom recovery so to retain it automatically rename the TWRP IMAGE
twrp_clt_0.1.img to recovery.img and put in the same folder with others files.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Remove all security locks from your phone before rebooting to TWRP.
Go to System- Developer Options
Disable Screen lock (third row)
this will suffice to remove the security locks of the phone (sequences, pin,fingerprints)
-Reboot to TWRP
If you are rooted, remove Magisk first with its uninstaller. I don't know if it's needed but better don't have things like that
messing around during the update. You can reroot later anyway.
-Go to the folder with the files and flash the system using the HuRUpdater_0.3.zip ONLY
That great tool will do all the job needed. After system, it will reflash the TWRP recovery IMG you previoulsly renamed
overwriting again the stock ramdisk_recovery that comes with the firmware.
It will take some minutes, don't panic and let the process end.
You will see some red errors but don't worry,it's fine
- Reboot in your TWRP to check (from inside TWRP , reboot - recovery, be sure not to have a usb cable plugged or it will trigger stock EMUI e-recovery)
- Wipe dalvik and cache
- Reroot new system with Magisk
-Reboot to system and restore the security lock in developer options
- Restore your fingerprints and pins
- Enjoy the update.
Thanks to @zxz0O0 for this great Tool, works good on P20 pro too.
And obviously @Pretoriano80 for his recovery.
Reserved
Working adb sideload?
If an update is already approved by Huawei, can we just download the firmware through HFF and place it in the appropriate folder, go to SYSTEM to check for updates, and then install it?
mangusZen said:
If you have unlocked bootloader and TWRP, you can flash a newer firmware using HuRUpdater
This steps can be risky for your device if you don't know what you are doing, so try to read some guide about flashing first
before attempt these operations if you are a new to these things.
I don't take any responsability of catastrophic failures and loss of data.
-- I did a titanium backup before the upgrade, but in my case no restore was needed as all data were retained.
In this simple update no factory reset was triggered.
Please read the HUrupdater thread also for more informations.
- Install Unofficial TWRP by Pretoriano80
- Download HuRUpdater 0.3 and put it in a folder in your sdcard
-Search the firmware for your device with Firmware Finder
Make sure you download the correct firmware version for your device (type, region code)
wrong firmware can brick your device
I used updated firmware files APPROVED for my device checked with firmware finder app.
I don't know if flashing NOT APPROVED files will harm your device. You have been warned.
I successfully updated my device from CLT-L29C636B130 to CLT-L29C636B131
***Don't try to rebrand your phone with this method***
- Use FullOTA-MF images of the firmware and download the 3 files needed
in my case:
update.zip
update_data_full_public.zip
update_full_CLT-L29_hw_spcseas.zip
- rename the 3 files to:
update.zip
update_data_public.zip
update_all_hw.zip
and put the files in the same folder with HuRUpdater 0.3
(optional)
- The Update will overwrite your TWRP custom recovery so to retain it automatically rename the TWRP IMAGE
twrp_clt_0.1.img to recovery.img and put in the same folder with others files.
- remove all security locks from your phone before rebooting to TWRP.
Go to System- Developer Options
Disable Screen lock (third row)
this will suffice to remove the security locks of the phone (sequences, pin,fingerprints)
-Reboot to TWRP
-If you are rooted, remove Magisk first with its uninstaller. I don't know if it's needed but better don't have things like that
messing around during the update. You can reroot later anyway.
-Go to the folder with the files and flash the system using the HuRUpdater_0.3.zip ONLY
That great tool will do all the job needed. After system, it will reflash the TWRP recovery IMG you previoulsly renamed
overwriting again the stock ramdisk_recovery that comes with the firmware.
- It will take some minutes, don't panic and let the process end.
You will see some red errors but don't worry,it's fine
- Reboot in your TWRP to check (from inside TWRP , reboot - recovery, be sure not to have a usb cable plugged or it will trigger stock EMUI e-recovery)
- Wipe dalvik and cache
- Reroot new system with Magisk 16.4
-Reboot to system and restore the security lock in developer options
- restore your fingerprints and pins
- enjoy the update.
Thanks to @zxz0O0 for this great Tool, works good on P20 pro too.
And obviously @Pretoriano80 for his recovery.
Click to expand...
Click to collapse
ekremxx said:
Working adb sideload?
Click to expand...
Click to collapse
I have not tried that, it depends on the TWRP recovery, let us know if you try
sarichter said:
If an update is already approved by Huawei, can we just download the firmware through HFF and place it in the appropriate folder, go to SYSTEM to check for updates, and then install it?
Click to expand...
Click to collapse
I really don't know, and I don't think it will work.
As far as I know this is the only manual update method for now.
I just updated to unapproved .150 for my c636 and all seems fine
If I reinstall twrp by renaming it as recovery.img, will HuRUupdater install the twrp in recovery_ramdisk, or will it replace eRecovery instead?
If twrp doesn't replace eRecovery, how do I get to eRecovery? As of now, whenever I want to enter recovery, it will get to twrp.
sishafie said:
If I reinstall twrp by renaming it as recovery.img, will HuRUupdater install the twrp in recovery_ramdisk, or will it replace eRecovery instead?
If twrp doesn't replace eRecovery, how do I get to eRecovery? As of now, whenever I want to enter recovery, it will get to twrp.
Click to expand...
Click to collapse
eRecovery is not replaced.
To enter there try other volume button or with a cable plugged
Not working adb sideload... How I can install I not know...not have my phone micro SD card slot...puff
sishafie said:
If I reinstall twrp by renaming it as recovery.img, will HuRUupdater install the twrp in recovery_ramdisk, or will it replace eRecovery instead?
If twrp doesn't replace eRecovery, how do I get to eRecovery? As of now, whenever I want to enter recovery, it will get to twrp.
Click to expand...
Click to collapse
when booting there is a screen prompting to whether you want to go to eRecovery by pressing up or just boot into system and something ike that
---------- Post added at 04:23 PM ---------- Previous post was at 04:23 PM ----------
ekremxx said:
Not working adb sideload... How I can install I not know...not have my phone micro SD card slot...puff
Click to expand...
Click to collapse
why you want to do sideload ? guide clearly explained to install it using TWRP.
if you dont have TWRP, then install it first
I install twrp but how can I install whitour sd card I not have sd card slot my Huawei p20 pro one SIM card join no have sd card slot how I can install i not know.. when I try install abd sideload hrudader say cant find update.zip
update_data_public.zip
update_all_hw.zip
ekremxx said:
I install twrp but how can I install whitour sd card I not have sd card slot my Huawei p20 pro one SIM card join no have sd card slot how I can install i not know.. when I try install abd sideload hrudader say cant find update.zip
update_data_public.zip
update_all_hw.zip
Click to expand...
Click to collapse
The guide never said that you need sdcard
it said, that u need to put all those three files in same folder with the HuruUpdater.zip , and of course you can put it in your internal storage
i wont explain anything here. you better re-read the whole main post, as it already very clear
- put all files in one folder
- reboot to twrp
- flash huruupdater.zip
- boot to system
- reboot to twrp
- flash magisk to reroot
which step exactly that not understandable ? :silly:
I can install that's style orjinal filmware ty so much
Forgive me if this is not the appropriate forum, one question:
I have the Huawei P20, for this phone I only have 2 firmware files, the "Update .zip" and the "update_full_EML_L09_hw_eu.zip ".
Can't find the "update_data_public.zip"
Can I install the new firmware with Hurupdater anyway ? Thanks in advance.
Roberto
moghetto said:
Forgive me if this is not the appropriate forum, one question:
I have the Huawei P20, for this phone I only have 2 firmware files, the "Update .zip" and the "update_full_EML_L09_hw_eu.zip ".
Can't find the "update_data_public.zip"
Can I install the new firmware with Hurupdater anyway ? Thanks in advance.
Roberto
Click to expand...
Click to collapse
You should check and ask at P20 and HURupdater threads.
I don't know about P20.
Hello! Thank you very much for this tutorial .. A question.. I am in Chipset-boston 8.1.0. 001 (01DL) I have the bootloader open, just by installing the recovery that you say in the tutorial and then the other steps, I would not have a problem, right?
can I downgrade firmware safely with this method? im on 150 and want to go back to 130
Ferezesal19 said:
Hello! Thank you very much for this tutorial .. A question.. I am in Chipset-boston 8.1.0. 001 (01DL) I have the bootloader open, just by installing the recovery that you say in the tutorial and then the other steps, I would not have a problem, right?
Click to expand...
Click to collapse
You should not have problem, unless you are trying to rebrand.
Allesa said:
can I downgrade firmware safely with this method? im on 150 and want to go back to 130
Click to expand...
Click to collapse
I don't know about downgrading and I would not raccomend it
mangusZen said:
You should not have problem, unless you are trying to rebrand.
Click to expand...
Click to collapse
Thanks you. Only i want to Update... What firm you recommend That improves the duration of the battery?