Related
Note: I'm not the developer of this recovery
Credit: All the credit goes to androidlover5842
And me (for testing)
Screenshots:
See Attachments
Features:
Selinux support
MTP mode (fixed in the new recovery )
Instructions:
Method 1:
Download zip and flash it from your old recovery.
Reboot recovery.
Method 2: Using Rashr app
Download zip and extract it.
Copy the recovery.img to your device.
Open Rashr app and select recovery from storage.
Select the recovery and flash it.
Reboot into recovery.
Downloads:
TWRP (Old)
TWRP (New)
Source: https://github.com/I8552-cm11/twrp_device_samsung_arubaslim
Contributors:
androidlover5842
Version Information
Status: Stable
Going to upload something very interesting
Just wait guys
You guys have been waiting for many years for that
It's stable CM11
Uploading
did u build this or just port from other device with same specification?
zainifame said:
did u build this or just port from other device with same specification?
Click to expand...
Click to collapse
androidlover5842 made this recovery and i tested it before uploading here
And credit goes to him for building one for core
Ahh, one request, remove button bootloader and replace with download cause core duos doesn't have bootloader mode, add this flag to the boardconfig :
# for disable bootloader button since this device doesn't have bootloader partition
TW_NO_REBOOT_BOOTLOADER := true
# enable download mode
TW_HAS_DOWNLOAD_MODE := true
# disable cpu temperature this device doesn't have this too
TW_NO_CPU_TEMP := true
I have no tested this recovery, but some unused button must remove so that user didn't have problem with that button, overall thanks for him for his build
zainifame said:
Ahh, one request, remove button bootloader and replace with download cause core duos doesn't have bootloader mode, add this flag to the boardconfig :
# for disable bootloader button since this device doesn't have bootloader partition
TW_NO_REBOOT_BOOTLOADER := true
# enable download mode
TW_HAS_DOWNLOAD_MODE := true
# disable cpu temperature this device doesn't have this too
TW_NO_CPU_TEMP := true
I have no tested this recovery, but some unused button must remove so that user didn't have problem with that button, overall thanks for him for his build
Click to expand...
Click to collapse
Okay sure
I'll convey the same to androidlover5842
Is MTP, sideload, adb shell, backup & restore, and all feature available on this twrp is fully working?
zainifame said:
Is MTP, sideload, adb shell, backup & restore, and all feature available on this twrp is fully working?
Click to expand...
Click to collapse
Yup
It's working and i'll report tomorrow about mtp
Nice!
Unable to mount cache
it shows unable to mount cache every time i flash rom 7 stops giving Error 7.......
Any solutions
This is answering my question. Thank you.
hareshsangar said:
it shows unable to mount cache every time i flash rom 7 stops giving Error 7.......
Any solutions
Click to expand...
Click to collapse
Mounting a cache? For what is it? It's a first time I heard that a cache can be mounted.
SHARING IS GOOD said:
This is answering my question. Thank you.
Mounting a cache? For what is it? It's a first time I heard that a cache can be mounted.
Click to expand...
Click to collapse
Bro , Just reboot into recovery , Go to mount option you will find each option which can be mounted ... and i know you can find it:laugh:
hareshsangar said:
Bro , Just reboot into recovery , Go to mount option you will find each option which can be mounted ... and i know you can find it:laugh:
Click to expand...
Click to collapse
can you test my build TWRP 3.0.2-0 use my device tree for GT-S6310 as base and adapt to GT-I8262, so report to me is MTP, usb storage, brightness, and etc are working or not, and usb storage actually is mounting micro sdcard(external storage) as usb flash drive, thanks buddy
This is log when using method 1:
Skipping MD5 check : no MD5 file found
Error flashing zip
SHARING IS GOOD said:
This is log when using method 1:
Skipping MD5 check : no MD5 file found
Error flashing zip
Click to expand...
Click to collapse
hey bro, can u test this?
zainifame said:
hey bro, can u test this?
Click to expand...
Click to collapse
I am using this: TWRP-3.0.2-0-20161019-UNOFFICIAL-arubaslim.zip
1. Flashing : successful
2. Rebooting back to android : successful
3. Booting into recovery mode: successful
4. Mounting sdcard into storage: successful
5. Backing up system (into sdcard): completed
6. Still not trying other function yet, but I think it's works.
Nice job masbro.
SHARING IS GOOD said:
I am using this: TWRP-3.0.2-0-20161019-UNOFFICIAL-arubaslim.zip
1. Flashing : successful
2. Rebooting back to android : successful
3. Booting into recovery mode: successful
4. Mounting sdcard into storage: successful
5. Backing up system (into sdcard): completed
6. Still not trying other function yet, but I think it's works.
Nice job masbro.
Click to expand...
Click to collapse
Bro, are you using method 2?
Just want to make sure because had bad experiences with cwm before
SHARING IS GOOD said:
I am using this: TWRP-3.0.2-0-20161019-UNOFFICIAL-arubaslim.zip
1. Flashing : successful
2. Rebooting back to android : successful
3. Booting into recovery mode: successful
4. Mounting sdcard into storage: successful
5. Backing up system (into sdcard): completed
6. Still not trying other function yet, but I think it's works.
Nice job masbro.
Click to expand...
Click to collapse
Have u try to mount usb storage, system, cache, etc? And brightness? Is that work? I can't test it cause my core duos has dead
hello My friends
I've repaired errors
And added features
download new recovery and unzip the file and flash by RASHR.APK
Features:
Code:
1-Supports otg usb
2-Supports ext sdcard
3-Added full support f2fs
4-Disabled Knox in the kernel and boot initialization
Enjoy :fingers-crossed:
Do not forget thank Button
only for j120h? or all divices
I can confirm it works and detects extSdCard properly now. To flash it via Odin I converted it to tar.md5. To save you the trouble I'm attaching it zipped up (unzip before flashing, and choose BL in Odin).
guloher said:
only for j120h? or all divices
Click to expand...
Click to collapse
yep,j120h only
what model you want
r4veren said:
I can confirm it works and detects extSdCard properly now. To flash it via Odin I converted it to tar.md5. To save you the trouble I'm attaching it zipped up (unzip before flashing, and choose BL in Odin).
Click to expand...
Click to collapse
thx pro
very nice
can you add pls like make SeLinux Permissive
---------- Post added at 02:47 AM ---------- Previous post was at 02:38 AM ----------
r4veren said:
I can confirm it works and detects extSdCard properly now. To flash it via Odin I converted it to tar.md5. To save you the trouble I'm attaching it zipped up (unzip before flashing, and choose BL in Odin).
Click to expand...
Click to collapse
md5 error binary
الله محيي اصلك يا ابن البلد
مشكوور كتيير
:laugh:
TWRP 3.0.3 Recovery ProjectDisclaimer
Disclaimer
#include
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
ChangeLog For 3.0.3
Fixed issue with ext4 (Formatting in ext4 no longer takes a life.)
build ramdisk on LZMA
Builded DT on lz4c
Improve backup display names with emulated storage
Fix crash during check for TWRP app
Fill uid/gid for screenshots at compile time
Allow custom bootloader msg offset in block misc
ScreenShots
Click Here
Installation Instructions:silly:
By PC
What’s required:
USB Cable / PC
SP Flash Tool or MTK Flash Tool
ADB VCOM Drivers (normally I use PDAnet)
Scatter file for your phone
recovery.img
Click to expand...
Click to collapse
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + volDown+power and then hold volUP to boot into recovery
By Mobile
Download the recovery in phone or move it to phone.
Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
Open flashify and follow the screenshots.
Go To Flash Tap And Select Recovery Image
Select - Choose a file , Download the recovery.img and select this recovery from your dir
Tap on Yes and after successful recovery flash , reboot and enjoy
By Custom Recovery (CTR OR TWRP or CWM)
Download Recovery Flashable TWRP from the given link ... Flash It and then reboot to recovery
Bugs :- The Recovery Is Inverted As Our device Is Inverted ... Will be fixed soon
Download Links (Choose Carefully)
TWRP 3.0.3 - SP TOOL FLASHABLE AND FLASHIFY : Click Here - (9mb)
TWRP 3.0.3 - CUSTOM RECOVERY FLASHABLE : Click Here
Credits
Allah SWT
Vojtěch Hejsek for build from source
TeamWin
Dees Troy
Omni
LPAD
AMD Families
You & Me
HIT THANKS IT WLL NOT COST YOU !!!
XDA:DevDB Information
TWRP 3.0.3 For Micromax Unite 2, Tool/Utility for the Micromax A106 Unite 2
Contributors
manjot.gni, charansai, Ayush Rathore, Teamwin
Source Code: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Version Information
Status: Stable
Current Stable Version: 3.0.3
Stable Release Date: 2017-02-23
Created 2017-02-26
Last Updated 2017-02-26
Will this work to flash resurrection remix MM?
---------- Post added at 01:13 PM ---------- Previous post was at 12:50 PM ----------
its not flashing through flashify it gives error and yes i have rooted stock rom
---------- Post added at 01:22 PM ---------- Previous post was at 01:13 PM ----------
not flashing through mobile uncle tools also
Hey bro send me a link
Peter pan7034779691]I am kinda new to xda.... And therefore I don't know much about modding android.... But I have flashed many ROMs in my device (MMX u3) and also in some huawei devices ... ....
I have noticed that MMX u2 has many ROMs... Whereas its successor, MMX u3 don't have much.. . so. Can u plz guide me to port resurrection remix 5.6.7 for using in my micromax unite 3
THANKS IN ADVANCE
manjot.gni said:
TWRP 3.0.3 Recovery ProjectDisclaimer
ChangeLog For 3.0.3
Fixed issue with ext4 (Formatting in ext4 no longer takes a life.)
build ramdisk on LZMA
Builded DT on lz4c
Improve backup display names with emulated storage
Fix crash during check for TWRP app
Fill uid/gid for screenshots at compile time
Allow custom bootloader msg offset in block misc
ScreenShots
Click Here
Installation Instructions:silly:
By PC
What’s required:
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + volDown+power and then hold volUP to boot into recovery
By Mobile
Download the recovery in phone or move it to phone.
Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
Open flashify and follow the screenshots.
Go To Flash Tap And Select Recovery Image
Select - Choose a file , Download the recovery.img and select this recovery from your dir
Tap on Yes and after successful recovery flash , reboot and enjoy
By Custom Recovery (CTR OR TWRP or CWM)
Download Recovery Flashable TWRP from the given link ... Flash It and then reboot to recovery
Bugs :- The Recovery Is Inverted As Our device Is Inverted ... Will be fixed soon
Download Links (Choose Carefully)
TWRP 3.0.3 - SP TOOL FLASHABLE AND FLASHIFY : Click Here - (9mb)
TWRP 3.0.3 - CUSTOM RECOVERY FLASHABLE : Click Here
Credits
Allah SWT
Vojtěch Hejsek for build from source
TeamWin
Dees Troy
Omni
LPAD
AMD Families
You & Me
HIT THANKS IT WLL NOT COST YOU !!!
XDA:DevDB Information
TWRP 3.0.3 For Micromax Unite 2, Tool/Utility for the Micromax A106 Unite 2
Contributors
manjot.gni, charansai, Ayush Rathore, Teamwin
Source Code: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Version Information
Status: Stable
Current Stable Version: 3.0.3
Stable Release Date: 2017-02-23
Created 2017-02-26
Last Updated 2017-02-26
Click to expand...
Click to collapse
I flashed it, but now my screen goes black when I go into recovery mode
Opens original recovery please help !!!
TWRP 3.1.1.0
Whats new:
Backups will now include adopted storage keys
Fixed an adb restore issue
Fixed rebooting when no OS is present
Fixed line wrapping in the GUI terminal
Updated TWRP source code to AOSP 7.1.2
Screenshots
How to install:
Download attached file
Rename from .zip to .img
Flash via TWRP 3.0.2 in "Recovery" partition
Download:
View attachment recovery.zip
Thanks sir we need you here..
Thanx for being here ..
And also thnks for
your hardwork..
Would you recommend this flash file with!
Thanks
Read thread 1st
@andrw.gldmn sir many thanks for your work. I left my X2DS just because of no further development. But you are a hope after @yoAeroA00
andrw.gldmn said:
TWRP 3.1.1.0
Whats new:
Backups will now include adopted storage keys
Fixed an adb restore issue
Fixed rebooting when no OS is present
Fixed line wrapping in the GUI terminal
Updated TWRP source code to AOSP 7.1.2
Screenshots
How to install:
Download attached file
Rename from .zip to .img
Flash via TWRP 3.0.2 in "Recovery" partition
Download:
View attachment 4215463
Click to expand...
Click to collapse
Will this work with the Nokia 2?
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Features :
- f2fs formatable support (/data and /cache)
- Lattest kernel from @dev_harsh1998
Downloads:
TWRP-3.1.1 ARM64
TWRP-RECOVERY-3.1.1-0-x64bit.img
Hex Firmware
HEX-FIRMWARE-PATCH.zip
Installation Instruction :
Make Sure You Are On The Latest Hex-Firmware.
Fastboot :
- Turn off your phone, combine power + vol (-) to enter fastboot
- type " fastboot device " to check devices
- type " fastboot flash recovery TWRP-RECOVERY-3.1.1-0-x64bit.img "
- type " fastboot reboot "
TWRP :
- reboot into recovery (TWRP)
- select install image
- select TWRP-RECOVERY-3.1.1-0-x64bit.img
- swipe to install
- and reboot
Convert to f2fs :
Backup all your data off the Internal Storage because it will get wiped!!
- Enter TWRP, choose Wipe > Advanced Wipe
- Make a full wipe except External SD Card
- Check the box for "data" (for data) / Check the box for "cache" (for cache)
- Tap "Change or repair file system"
- Tap "Change file system"
- Tap "F2FS"
- Swipe the button
- Flash Kernel & ROM with F2FS support[/QUOTE]
Device tree:
Lenovo-A6000-TWRP
Credits:
@dev_harsh1998
@bugerxXx
I kanged his thread. :silly:
XDA:DevDB Information
TWRP, Tool/Utility for the Lenovo A6000/Plus
Contributors
Has.007, dev_harsh1998, bugerxXx
Version Information
Status: Beta
Created 2017-07-31
Last Updated 2017-08-29
Screenshots:
Reserved
TWRP Never Dies So Who Knows We May Need Another Post.
That's cool :good: and thanks
Thanks for exclusive thread for TWRP - ARM64.
Thanks to @Has.007 , @dev_Harsh , @bugerxXx & all
Harshad121 said:
That's cool :good: and thanks
Click to expand...
Click to collapse
IbS285 said:
Thanks for exclusive thread for TWRP - ARM64.
Thanks to @Has.007 , @dev_Harsh , @bugerxXx & all
Click to expand...
Click to collapse
Welcome Guys.
Enjoy!
Can I install 32 bit rom with 64 bit twrp.
mr.anonymous12 said:
Can I install 32 bit rom with 64 bit twrp.
Click to expand...
Click to collapse
Oh yes u can
I don't know how thank you boi :'(
I kinda lost track of the forum but i have to ask a couple of questions.Whats a Hex firmware and what are the benefits of switching to arm64?
rifatji said:
I don't know how thank you boi :'(
Click to expand...
Click to collapse
"Account Currently Disabled"
JovanSijacki said:
I kinda lost track of the forum but i have to ask a couple of questions.Whats a Hex firmware and what are the benefits of switching to arm64?
Click to expand...
Click to collapse
Hex-Firmware is a patch to be Flashed cleanly before flashing any roms from now on.
All the details about ARM64 and Hex are already there in my Resurrection Remix Thread Update.
Please Refer Here.
I'm on a cm 13 based rom with twrp 2.8.8.7. can i flash the hex firmware from 2.8.8.7 recovery? And after that can i upgrade my recovery to 3.1.1 by flashing it via 2.8.8.7 recovery?
rohitdey18 said:
I'm on a cm 13 based rom with twrp 2.8.8.7. can i flash the hex firmware from 2.8.8.7 recovery? And after that can i upgrade my recovery to 3.1.1 by flashing it via 2.8.8.7 recovery?
Click to expand...
Click to collapse
Yes you can upgrade recovery via 2.8.8.7
1) click on install and select img file
2) choose recovery partition and flash
3) after that boot into new recovery and flash hex firmware patch
Has.007 said:
- Turn off your phone, combine power + vol (-) to enter fastboot
- type " fastboot device " to check devices
- type " fastboot flash recovery TWRP-3.0.2-Lenovo-A6000x32.img "
- type " fastboot reboot "
Click to expand...
Click to collapse
you forget to edit
it must be
- Turn off your phone, combine power + vol (-) to enter fastboot
- type " fastboot device " to check devices
- type " fastboot flash recovery TWRP-RECOVERY-3.1.1-0-x64bit.img "
- type " fastboot reboot "
how can i check that the arm64 twrp successfully installed or not as i flash it through flashify app and before this i already have installed 32bit twrp.... waiting for someone's reply....
Hey...can I install it on kk twrp 2.8.8
Isfaan said:
Hey...can I install it on kk twrp 2.8.8
Click to expand...
Click to collapse
You can flash this TWRP but you may not be able to flash ROMs, because of the changed things at the root level. It is suggested to flash the lollipop firmware before flashing Nougat ROMs otherwise you'll end up with weird bugs and even bootloops.
mg712702 said:
how can i check that the arm64 twrp successfully installed or not as i flash it through flashify app and before this i already have installed 32bit twrp.... waiting for someone's reply....
Click to expand...
Click to collapse
If you flash with Flashify then most probably it'll be flashed. The better option is to open up your current 32bit recovery and in Install, select Install Image, then select the downloaded recovery and flash. For partition selection choose Recovery.
defy_owner said:
you forget to edit
it must be
- Turn off your phone, combine power + vol (-) to enter fastboot
- type " fastboot device " to check devices
- type " fastboot flash recovery TWRP-RECOVERY-3.1.1-0-x64bit.img "
- type " fastboot reboot "
Click to expand...
Click to collapse
Ahaha yupp I forgot thanks for the correction.