Database Info

[Redmi Note 4 MTK (Nikel)] Epic ROM 7.6.10 Released! (By EPIC Team)

Greetings MIUI-ers!!!​
Jamflux, Pocarropa, and MrRaines (MrTomatico here on en.miui), creators of Épic ROM, we are glad to present Épic ROM for Xiaomi Redmi Note 4, who was born thanks to the hard work of these guys. Epic ROM is a Custom ROM based on MIUI, but with some mods and improvements that you can see below on features chapter.
The focus of this ROM is improve MIUI official stock on many devices making many mods and improve Xiaomi sellers to get a bigger MIUI-ers family! This is not MIUI DEVICE TEAM Rom, this is an EPIC TEAM ROM who was born on HTCMANIA (spanish forum) one year ago! .
MIUI DEVICE TEAM is making an amazing work with other issues, and two of them will add to EPIC TEAM to bring to you EPIC. Thanks guys for your hard work!!! And thanks to all Xiaomi members and en.miui Smods/Admins/Mods: Thank you for all your support and help!
Epic ROM also will available on:
Mi MIX [Lithium] -> MrRaines (MrTomatico) NOW AVAILABLE
Mi MAX [Hydrogen] -> Albertkuba (coming soon)
Redmi Note 3 [Hennessy] -> ByAdversary NOW AVAILABLE
Redmi Note 3 Pro [Kenzo] -> Jamflux and Pocarropa NOW AVAILABLE
Redmi 3 [Ido] -> xXxlol456789xXx (Coming soon)
Redmi Note 4 [Nikel] -> coolmihir NOW AVAILABLE
**IMPORTANT ADVISE : Install at your own risk on your device. We are not responsible of any damage on your device. Read carefully instructions before install.
Requirements:
-Xiaomi Redmi Note 4
-Unlocked Bootloader (official unlock to prevent issues)
-Custom Recovery (TWRP ZCX Recovery is highly recommended)
-Make a full Backup before flashing using TWRP Recovery (System, Data, Cache, and EFS).
-Read all thread before proceed
-Love for technology and most important: Love for Xiaomi!
Features 10-Jun-2017​
Based on Latest 7.6.10 build (Xiaomi.eu build)
Multilanguage
Gapps Pico pre-installed (Google Play Store and Google Services... you can choose what Google app's are you going to install later )
Épic OTA Service Added on Settings
Epic Mods on OTA app
Music App Improved
Icons on Settings
Root SuperSU updated and adapted to RN4
Init.d support
Busybox pre-installed
Kernel tweaks (very little changes on boot.img)
MIUI Launcher improvements
Camera MODs (better image quality)
Adway integrated on system (you can see also on Settings)
All Chinese app's and Google app's (bloatware) removed
Advanced Reboot Menú (PowerMenu improved)
DolbyAtmos Updated to latest version
Fingeprint Lock (Not Enabled by default)
Supports Xposed but Xposed is not pre-installed (I am not going to pre-install Xposed on this ROM to prevent System Issues, but I bring you the posibility of installing it, thanks to init.d, root, and busybox... use Xposed at your own risk).
Few New Icons Added
Some Nice Wallpapers added
Setings > About Phone > Epic ROM Pic Changed [Screenshot Below]
RAM Improved [On an average 1.9GB or 1.8 GB is available]
More Languages and Spanish Updated (thanks to @JamFlux)
Assistant Touch Updated Like Epic Team Style
Animations on SystemUI (lockscreen). Thanks to Xiaomi EU.
Epic Bootanimation
Updater-Script improved thanks to @pocarropa
Increased Battery Performance
Better Battery and Performance/RAM management thanks to few more code lines from Epic Team & Xiaomi Eu
I have removed the SIM Signal Icon to the left and Center Clock Mod by Default. I will add it to the Epic OTA app Soon.
If you want them Download and flash it via the Recovery from here.
Flash it only on Epic ROM.
Languages Supported:
All European Languages from Xiaomi.eu (Thanks Guys)
How to install
Download ZIP from below.
Reboot to recovery (Press Power + Volume up)
Make a full backup of your current ROM and copy it to your computer to prevent issues.
Wipe: Dalvik, Cache, Data, System.
Install ZIP Rom.
**IMPORTANT ADVISE: Sometines TWRP have issues installing .zip and you might get Error 7. If this happens, please reinstall the ROM. In the second try, TWRP will install without problem. If you still having the issue, download the ROM again (sometimes servers download a corrupt .zip file...).
**IMPORTANT ADVISE 2: On first boot, you will get one bootloop, THAT'S NORMAL, this is caused by ROOT installation. Please, do not interrupt process and look how your device turns ON in 10-15 minutes. Next time you reboot or Power on your device, it will turn ON like always .
Reboot system and wait 10 minutes until your device loads the system (only first time)
Configure your Google Account and Mi Cloud like always
Enjoy.
Download Center
7.6.10 Epic Build out!
Download: EpicROM_7.6.10_Multilanguage_RedmiNote4_coolmihir.zip
Current Status: Tested and should be stable, install at your own risk!
If already using Epic ROM
Go to Settings > OTA & Mods. OTA is now available.
Download and flash it via the recovery. After flashing, just wipe the dalvik cache. The update will not format your phone and you will not,lose any app data. Don't worry
Those who are having bootlooping issue can reciprocate the following steps:-
Flash any Xiaomi Official Fastboot ROM (Stable or Dev) via MiFlash tool. Choose Clean_all. Now flash TWRP and wipe everything. Flas the above ROM and Reboot. If it then also bootloopes then flash this after flashing the ROM.
PLEASE, SUPPORT THIS PROJECT DONATING TO SOME NGO WHO ARE HELPING NOW SOME COUNTRIES ON AFRICA TO GET WATER OR FOOD AND MEDICINES... WE DON'T WANT ANY MONEY FOR THIS, BUT YOU CAN HELP A LOT OF PEOPLE WITH A LITTLE DONATION...
Thanks to:
Xiaomi (and Xiaomi official developers for bring to us this amazing OS)
Google
Xiaomi Eu Team
MultiROM Team
Epic Team Members @JamFlux, @pocarropa, ByAdvesary, Albertkuba, @xxxlol456789xXx, @coolmihir, @mrtomatico (MrRaines))
All MIUI DEVICE TEAM
All Admins/Mods/SMods from En.MIUI
HTCMan

ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
Something's wrong here

Thanks and help me
Hi coolmihir thanks for your work for this rom. I just try it. But I have little problem that I can't add or remove my fingerprint. Also I can't change my password for lock screen. It always back to Settings. Could you help me?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can you build an rom with magisk v13? Its working good...

yasars said:
Can you build an rom with magisk v13? Its working good...
Click to expand...
Click to collapse
Will do the next build!!

JohnMelson said:
Something's wrong here
Click to expand...
Click to collapse
Corrected

fazrinashari said:
Hi coolmihir thanks for your work for this rom. I just try it. But I have little problem that I can't add or remove my fingerprint. Also I can't change my password for lock screen. It always back to Settings. Could you help me?
Click to expand...
Click to collapse
Works fine for me!! Click on view summary when it fc and upload the ss here.

fazrinashari said:
Hi coolmihir thanks for your work for this rom. I just try it. But I have little problem that I can't add or remove my fingerprint. Also I can't change my password for lock screen. It always back to Settings. Could you help me?
Click to expand...
Click to collapse
Same for me please fix it, it is a very good rom

xtreme97 said:
Same for me please fix it, it is a very good rom
Click to expand...
Click to collapse
Works fine on my phone.

Hello. I got some problem here. When I installed the ROM there was no notification that show the installation complete and succesfully. It just suddenly going back to the TWRP homepage. Then I try to wipe the dalvik cache from "WIPE" tab, the I reboot the system. But it was stuck in th booting (the white line loading). I have waiting for 2 hours but it still stucked. Can u help me with this? Thank you

yahyagta said:
Hello. I got some problem here. When I installed the ROM there was no notification that show the installation complete and succesfully. It just suddenly going back to the TWRP homepage. Then I try to wipe the dalvik cache from "WIPE" tab, the I reboot the system. But it was stuck in th booting (the white line loading). I have waiting for 2 hours but it still stucked. Can u help me with this? Thank you
Click to expand...
Click to collapse
same case with me

Works great, but unable to change lockscreen password or add fingerprint without it crashing.

yahyagta said:
Hello. I got some problem here. When I installed the ROM there was no notification that show the installation complete and succesfully. It just suddenly going back to the TWRP homepage. Then I try to wipe the dalvik cache from "WIPE" tab, the I reboot the system. But it was stuck in th booting (the white line loading). I have waiting for 2 hours but it still stucked. Can u help me with this? Thank you
Click to expand...
Click to collapse
Flash the Official ROM via Mi Flash tool clean all and them ash twrp again. Wipe everything and install the ROM again.

Are the battery issues faced by multi rom users fixed in this rom?
---------- Post added at 08:40 AM ---------- Previous post was at 08:09 AM ----------
Are the battery issues faced by multi rom users fixed in this rom?

coolmihir said:
Works fine for me!! Click on view summary when it fc and upload the ss here.
Click to expand...
Click to collapse
java.lang.RuntimeException: Unable to start activity ComponentInfo{com.android.settings/com.android.settings.ConfirmLockPassword$InternalActivity}: android.view.InflateException: Binary XML file line #11: Binary XML file line #11: Error inflating class com.android.internal.widget.PasswordEntryKeyboardView
at android.app.ActivityThread.performLaunchActivity(ActivityThread.java)
at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java)
at android.app.ActivityThread.access$1000(ActivityThread.java)
at android.app.ActivityThread$H.handleMessage(ActivityThread.java)
at android.os.Handler.dispatchMessage(Handler.java)
at android.os.Looper.loop(Looper.java)
at android.app.ActivityThread.main(ActivityThread.java)
at java.lang.reflect.Method.invoke(Native Method)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java)
Caused by: android.view.InflateException: Binary XML file line #11: Binary XML file line #11: Error inflating class com.android.internal.widget.PasswordEntryKeyboardView
at android.view.LayoutInflater.inflate(LayoutInflater.java)
at android.view.LayoutInflater.inflate(LayoutInflater.java)
at android.view.LayoutInflater.inflate(LayoutInflater.java)
at com.android.settings.ConfirmLockPassword$ConfirmLockPasswordFragment.b(ConfirmLockPassword.java)
at com.android.settings.BaseConfirmLockFragment.onCreateView(BaseConfirmLockFragment.java)
at android.app.Fragment.performCreateView(Fragment.java)
at android.app.FragmentManagerImpl.moveToState(FragmentManager.java)
at android.app.FragmentManagerImpl.moveToState(FragmentManager.java)
at android.app.FragmentManagerImpl.moveToState(FragmentManager.java)
at android.app.FragmentManagerImpl.dispatchActivityCreated(FragmentManager.java)
at android.app.FragmentController.dispatchActivityCreated(FragmentController.java)
at android.app.Activity.performCreateCommon(Activity.java)
at android.app.Activity.performCreate(Activity.java)
at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java)
... 10 more
Caused by: android.view.InflateException: Binary XML file line #11: Error inflating class com.android.internal.widget.PasswordEntryKeyboardView
at android.view.LayoutInflater.createView(LayoutInflater.java)
at android.view.LayoutInflater.createViewFromTag(LayoutInflater.java)
at android.view.LayoutInflater.createViewFromTag(LayoutInflater.java)
at android.view.LayoutInflater.rInflate(LayoutInflater.java)
at android.view.LayoutInflater.rInflateChildren(LayoutInflater.java)
at android.view.LayoutInflater.rInflate(LayoutInflater.java)
at android.view.LayoutInflater.rInflateChildren(LayoutInflater.java)
... 24 more
Caused by: java.lang.reflect.InvocationTargetException
at java.lang.reflect.Constructor.newInstance(Native Method)
... 31 more
Caused by: java.lang.NullPointerException: Attempt to invoke virtual method 'boolean android.graphics.drawable.Drawable.getPadding(android.graphics.Rect)' on a null object reference
at android.inputmethodservice.KeyboardView.<init>(KeyboardView.java)
at com.android.internal.widget.PasswordEntryKeyboardView.<init>(PasswordEntryKeyboardView.java)
at com.android.internal.widget.PasswordEntryKeyboardView.<init>(PasswordEntryKeyboardView.java)
at com.android.internal.widget.PasswordEntryKeyboardView.<init>(PasswordEntryKeyboardView.java)
... 32 more
Here is the lock for FC

No matter what I do, the ROM just doesn't want to boot, it stays stuck at the first Mi Logo no matter how much I wait, tried flashing it multiple times, re-downloaded the ROM file, updated TWRP, nothing works.

Can i flash this to my redmi note 4x 4/64?

Silvers91 said:
No matter what I do, the ROM just doesn't want to boot, it stays stuck at the first Mi Logo no matter how much I wait, tried flashing it multiple times, re-downloaded the ROM file, updated TWRP, nothing works.
Click to expand...
Click to collapse
i got this also, did you figure it out?

retarded1 said:
i got this also, did you figure it out?
Click to expand...
Click to collapse
Me too, but I fix it by install miuipro first
Once start, reboot and install this ROM, works fine
Anyway, is this ROM Magisk support? I try to install but it seems SuperSU break it. And also, I can't uninstall SuperSU from the app setting

retarded1 said:
i got this also, did you figure it out?
Click to expand...
Click to collapse
The dev answered me on Mi forum and this is what he said:
"Flash the fastboot ROM using MiFlash tool choose clean_all and flash the ROM again via TWRP."
Can't try it now though, try and see if it works. At your own risk of course.

[ROM][Elemental V1.1] EMUI 5.1-Huawei Mate 10 Lite (Dual Sim)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][FONT="Tahoma"][COLOR="Black"]/*
* I Do not Become Responsible For The Bad Installation
* Now Your Warranty Is Mine, Before Flashing Investigate
* You Decide to Make All These Modifications to Your Device
* Under Your Own Risk, If You Spoil Your Device, I Will Laugh At You
*/[/COLOR][/FONT][/B]
Requirements:
-Only For Free Versions (Dual Sim) Of Latin America, Europe, Asia, Etc
-Huawei Mate 10 Lite-Honor 9i: RNE-L21-RNE-L23-RNE-L22-RNE-L03-RNE-L02-RNE-AL00 3GB-4GB-6GB RAM
-RNE-LXX (Need Testers For Other Variants)
-Bootloader Unlocked
-Activate USB Debugging
-Activate Unknown Applications
-Activate OEM Unlock
Installation:
-Install Specialized Recovery Twrp for Huawei Mate 10 Lite (It is Automated)
Installed Through Fastboot Mode, Unzip File (Twrp-Mate 10 Lite Nougat-KingOfMezi)
Click on the Bat File and Enter, Automatically Install The Recovery ....
-Copy Rom Mate 10 Lite-Elemental V1.1 (On The SD Card Of The Phone)
-We turn off the phone and enter the Twrp Recovery Mode.
-Change the Data Partition to F2FS
(If You Already Have It By Default Skip This Step)
We mark
-Davilk / Art Cache
-Cache
-Data
-Internal Storage
-System
-Only Mark What I Mention
-And We Make The Wipes, We're Done
-Flashes Rom Mate 10 Lite-Elemental V1.1 (Delay Around 8 to 10 Minutes)
-When Finish,At The End Flash The Patch According To Its Version
We Give In Reboot System (Phone Automatically Initiate)
-Initial Start and Enjoy
-End
Click to expand...
Click to collapse
Telegram Group:
Here Will Support for All Hi6250 Devices:
Huawei Mate 10 Lite,Huawei P10 Lite,Honor 6X,Honor 7X,Honor 8 Lite
Honor 5C,Huawei P9 Lite 2017 y 2016 https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
Image gallery:
XDA:DevDB Information
ROM For The Huawei Mate 10 Lite Elemental
Contributors
KingOfMezi
Chisetdel31260
Neondragon1909
-KangVIP Framework & Team HRT
-Kilroystyx Team Win Recovery Project For Mate 10 Lite
This ROM is Based on Stock Huawei Mate 10 Lite ROM EMUI 5.1
Kernel Source: https://github.com/KingOfMezi/Kernel-Mate10Lite-EMUI-5.1
ROM OS Version: 7.0 Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 5.1
Version Information
Status: Stable
Current Stable Version: 2018-02-18
Stable Release Date: 2018-02-18
Created: 2018-02-19
Last Updated: 2018-02-18

Telegram Group:
Here Will Support for All Hi6250 Devices:
Huawei Mate 10 Lite,Huawei P10 Lite,Honor 6X,Honor 7X,Honor 8 Lite
Honor 5C,Huawei P9 Lite 2017 y 2016 https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
If you like my work, you can donate
https://www.paypal.me/KingOfMezi
Downloads:
-Specialized Recovery For Flash Firmware Mate 10 Lite And Custom Roms https://mega.nz/#!WVplUBrK!eZ1O3nOXN6NKMgNLa0nzKxDBu2GH_jDj-xpoarN3JkY
-Mate 10 Lite-Elemental V1.1 (13/2/2018) (It weighs 1.75GB) https://mega.nz/#!3UAHyboT!nz_ysoMAtxt55mXYAH4teL3WBDMaUVeamS4AT3YLkcM
Elemental Rom Compatible With All Variants
The Patch For The RNE-LXX Versions Flashes This File At The End
Choose The Patch According To its Version, Do Not forget
1: Patch-RNE-L21-L01 https://mega.nz/#!mc5UAKSS!qtHsPJhRLhJZ7fyiD6PWYChvHWxghvEptciLPTeumVM
2atch-RNE-L23-L03 https://mega.nz/#!rQwTTASI!9qyX0oY0ipNmr6ckWSk7V1cinpUZswC6ZRwbkjA9OWE
3atch-RNE-L22-L02 https://mega.nz/#!3NABCB7T!SjPClwP6IcKzQXwxLcL5fA-srrWnz7iOFe6JosiCzfg
install from the recovery twrp, then give and:dalvik cache and restart system Patch-RNE-LXX-4G .zip
https://mega.nz/#!fU4mXS5b!_d5DuXrvHhmMo-84FodwtvS1TbaV5TerzMEn8UbxMFY

does this have the face unlock and ar lens feature?
(*nevermind, it's already in the description.*)
i am now waiting for feedback from those who installed this.

Hello, Thank you for the rom.
I will test it.

gregd3m said:
Hello, Thank you for the rom.
I will test it.
Click to expand...
Click to collapse
pls give feedback after you test. thanks!

Finally the first rom :victory:

where do i find the face unlock, i'm using RNE-L22

LaurentDon said:
where do i find the face unlock, i'm using RNE-L22
Click to expand...
Click to collapse
Hello.
of course.
have made a backup.
TO install the rom. I did it as his.
twrp, WIPE checked
-Davilk / Art Cache
-cache
-Data
-Internal Storage
-System
and swipe
then Format data, write YES confirm.
then check Data changes f2f.
went now to install, install rom elemental.zip follow the instructions it's an aroma.
do not check double tap-tap. does not work with the matte 10 lite RNE-L21.
enjoy .
FOR
FACE UNLOCK
you will find it at Parameters.

Thank u. This is awesome. Gave life to our phones. Wow
Sent from my Galaxy S8 using XDA Labs

Chisetdel31260 said:
Hello.
of course.
have made a backup.
TO install the rom. I did it as his.
twrp, WIPE checked
-Davilk / Art Cache
-cache
-Data
-Internal Storage
-System
and swipe
then Format data, write YES confirm.
then check Data changes f2f.
went now to install, install rom elemental.zip follow the instructions it's an aroma.
do not check double tap-tap. does not work with the matte 10 lite RNE-L21.
enjoy .
FOR
FACE UNLOCK
you will find it at Parameters.
Click to expand...
Click to collapse
I don't find face unlock
Sent from my Galaxy S8 using XDA Labs

nazir81 said:
I don't find face unlock
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
have you followed the instructions?
have not you flashed another file?
* (example version.img) if no it removes face unlock.
* and last question.
what version do you have. RNE-L ?? c ???
Maybe the dev has forgotten you.
he will add it if that is the case.

The rom works well, it is fluid with a lot of customization and tweak.
Everything works fine either:
the double tap
contacts sync does not work with google
the first setting of the phone which is bug the scripts do not appear.
the unlock face does not work
RNE-L21

gregd3m said:
The rom works well, it is fluid with a lot of customization and tweak.
Everything works fine either:
the double tap
contacts sync does not work with google
the first setting of the phone which is bug the scripts do not appear.
the unlock face does not work
RNE-L21
Click to expand...
Click to collapse
Hello
for synchronization of contact, I have no problem.
** for face unlock, I admit that the application is present, but I have not yet managed to register my face.
I found a tutorial here but it's Chinese. http://club.huawei.com/thread-15178560-1-1.html
---------- Post added at 10:09 PM ---------- Previous post was at 09:52 PM ----------
gregd3m said:
The rom works well, it is fluid with a lot of customization and tweak.
Everything works fine either:
the double tap
contacts sync does not work with google
the first setting of the phone which is bug the scripts do not appear.
the unlock face does not work
RNE-L21
Click to expand...
Click to collapse
yes to restore the backup.
me, I do like her.
TWRP.
Went to Wipe. check all except SD card. and swipe.
Go to Restore, restore partition by partition. restore all one by one.
(boot, cust, misc, system, product, ect ..... except oeminfo)
and restart.
there will normally be no sound, as for me, the cause is due to twrp can not restore product properly.
so copy your backup of product.ext4.win to the pc. renames it in product.img.
and copy pasted into the .zip file Meta inf https://mega.nz/#!R5MVESiS!TZ_ZxS8S9CziJ8_D6OTNA5A31oPFLU0M0mF6tP5R84o
then twrp, install the zip.
restarts.
here is normally the rom is complete.
now, to delete twrp.
with adb and fastboot. flash recovery.img stock. RNE-l21c432 https://mega.nz/#!EhkCQSCT!Pk7K-JHhn3bT_U5figB-6FdIh-VOwbBK8PpDjHAb15U
restarts.
here is.

Chisetdel31260 said:
Hello.
of course.
have made a backup.
TO install the rom. I did it as his.
twrp, WIPE checked
-Davilk / Art Cache
-cache
-Data
-Internal Storage
-System
and swipe
then Format data, write YES confirm.
then check Data changes f2f.
went now to install, install rom elemental.zip follow the instructions it's an aroma.
do not check double tap-tap. does not work with the matte 10 lite RNE-L21.
enjoy .
FOR
FACE UNLOCK
you will find it at Parameters.
Click to expand...
Click to collapse
What version are you using? So I just need to format data and change my file system? To enable the face unlock?

flashed successfully by the following steps as mentioned BUT didn't get the face unlock feature!
What's the solution please tell me?
Device: RNE_L21C185B1
---------- Post added at 02:00 AM ---------- Previous post was at 01:58 AM ----------
LaurentDon said:
What version are you using? So I just need to format data and change my file system? To enable the face unlock?
Click to expand...
Click to collapse
Tried with that method BUT no face unlock

Chisetdel31260 said:
have you followed the instructions?
have not you flashed another file?
* (example version.img) if no it removes face unlock.
* and last question.
what version do you have. RNE-L ?? c ???
Maybe the dev has forgotten you.
he will add it if that is the case.
Click to expand...
Click to collapse
Nope I didn't flash anything else. I hav L21 C185. Yes rom is good. All working. But i didnt turn data into f2fs. U think that's why? I also hav contacts sync problem.
Sent from my Galaxy S8 using XDA Labs

Help me!!!
I have problems with my network, my cell phone is an RNE-L03, I just revived it from a brick, the problem is that it does not detect the sim, if it detects the network, but it does not let me activate the sim, my cell phone was only for a sim, what can I do?

Peligrito2010 said:
I have problems with my network, my cell phone is an RNE-L03, I just revived it from a brick, the problem is that it does not detect the sim, if it detects the network, but it does not let me activate the sim, my cell phone was only for a sim, what can I do?
Click to expand...
Click to collapse
@Peligrito2010 We do not support phones found
if I flash the elemental rom has no problem, it was already tested

KingOfMezi said:
@Peligrito2010 We do not support phones found
if I flash the elemental rom has no problem, it was already tested
Click to expand...
Click to collapse
Hello mister, how to enable the face unlock. I'm using rne-l22

LaurentDon said:
Hello mister, how to enable the face unlock. I'm using rne-l22
Click to expand...
Click to collapse
To enable easy unlocking for RNE-L22
Install Elemental Rom again
and choose:
1: Kernel Elemental
2: Camara Mate 10 Lite
3: Support Volte 4G For Different Countries,USA,Russia,China,Etc
4: Double Tap
5: luck

LENOVO z5 Official/Custom Roms [OREO/PIE]

STOCK ROMS
ZUI 11.1.053
Target version: L78011_CN_OPEN_USER_Q00026.0_P_ZUI_11.1.053_ST_190731_qpst
basic version: ZUI_11.1.053
Size: 3.42gb
Link: https://mega.nz/file/YzwUTCwJ#j1v7lTO7Ivokgr2fkSnny5wB01nqCWm4TZu2hUK5xxE
ZUI 4.0.474
Target version: Lenovo_Z5_L78011_CN_OPEN_USER_Q00016.0_O_ZUI_4.0.474_ST_190118_QPST
basic version: ZUI_4.0.474
Size: 3.00gb
Link: https://drive.google.com/file/d/1F0VtbBfxoLdukGMytq8SslcWjqcsLABQ/view?usp=sharing
OFFICIAL ROMS & UPDATES
Target version: 10.5.306
basic version: 10.5.254
upgrade package size: 127.04 Mb & 3.36gb
View attachment 4773407
Applicable models: Lenovo Z5 (L78011)
Upgrade point of view
Support Unicom VoLTE;
Update Lenovo mobile phone customer service hotline number: 400-990-8888;
System Optimization
Fix the problem that the probability of the compass cannot be calibrated;
Fixed WeChat 7.0 avatar and received a message without a prompt tone;
Fix the problem that the HDR icon is also displayed under the HDR close finder frame;
Fix the problem of finding the mobile phone emergency contact does not support segment 166;
Fix the problem of flashback after clicking the QQ flashback after the end of the nighttime extreme power saving;
After the OTA upgrade is fixed, the default theme preview interface is different from other preview interfaces.
Fix the problem that the game volume function cannot be called up when the game voice function is enabled in the game interface;
Fix the problem that the three-letter X-Y-Z on the right side of the address book is manually clicked;
After repairing and unplugging the SD card formatted as internal storage, the "missing SD card device" notification cannot be clicked, causing the internal storage of the mobile phone to be unmounted;
Fix the different carrier card settings. After calling the main card, enter the contact - click any contact - long press the contact number to display the problem that the card 1 or card 2 operator call does not match the actual card location.
Precautions
Please make sure that the phone have a lot of power, power and storage space;
If you have problems with the upgrade, please go to the official Lenovo community for help.
The upgrade process may cause the phone to heat up or consume power for a short period of time. It is recommended that you restart the system again after the upgrade to obtain a stable experience.
DOWNLOAD LINK AFH Link : Chinese Web Link
Full ROM link (3.36GB):- Mega Drive
RETURN FROM CUSTOM to OFFICIAL ROM
Now returning to STOCK is possible
METHOD 1 (RESTORE TWRP BACKUP)
1. Download the TWRP back up of ZUI 4.0.474 from AFH & the Official ZUI 4.0.474
2. Unzip it (Its actually a 2.5 GB compressed file).
3. Now Boot into TWRP.
4. Now connect the mobile from PC and check the Root directory for TWRP>>BACKUPS
5. Make a new folder by name "cd6d6a03 ( change it with the name of your devices, can easily be checked via fastboot devices command) "
6. Put the extracted backup into that folder.
7. Wipe Dalvik,Cache and System.
8. Restore the backup. (Dont worry it will not BOOT your Z5)
9. Now POWER off the mobile.
10. Move to Qfill Mode (Press both VOLUME up+ Down and POwer button).
11. Connect to PC and Restore the Official Rom through QPST.
No more Sahara or Out of Memory error,........................ENJOY
METHOD 2 (TWRP FLASHABLE ROOTED ROM)
Download link: Mega Drive
Method to Flash this rom
Method 1:
1. Download the Zip package
2. Put it into SD Card
3. Boot into TWRP
4. Clear the Cache,Dalvik,Data & System.
5. Flash the package Normally
6. enjoy the Rooted Official PIE.
Method 2:
1. Download the package
2. Unzip it
3. Run the Flash.exe in given archive
4. Check the attachment to learn the Chinese exe meaning
5. enjoy the Rooted Official PIE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
METHOD 3 (FOR those who were on ZUI-10 & for going Back to ZUI 10)
Method back to Stock ZUI 10:
1: Flash Stock ZUI 10.5.254 via Qfil
2: Flash TWRP 10.5.254 via Fastboot
3: Flash this rom via Fastboot
Link: https://mirrors.lolinet.com/firmware/gsi/ZUI-AB-9-20190616-ErfanGSI.img.7z
4: Go to Twrp then wipe data. After wipe data choose Reboot System and wait 1 or 2 minutes.
(Your phone will stuck in Lenovo red logo).
5: Flash Stock ZUI 10.5.254 again via Qfil.
==you are completed back to ZUI 10.5.254==
OFFICIAL ROMS
10.5.254 [FINAL] for LENOVO Z5 Android P
ZUI version: 10.5.254
adapter model: L78011
Android version: 9.0
Brush type: QPST/DIRECT over 4.0.474
Compression package size: 3.36G
Package name: L78011_CN_OPEN_USER_Q00025.0_P_ZUI_10.5.254_ST_190404_qpst.zip
WHATS NEW
(fixed or changed issue with the previous one has been released Software comparison):
1. Add new application lock to support face unlocking mode;
2. Add U health camera to recognize calorie function;
3. New negative one-screen card display, support step counter / commute recommendation / fast payment, etc.;
4 New desktop editing mode, support more desktop layout, please press and hold on the desktop to enter the view;
5, the new control center and the notification bar are integrated, and support the desktop to slide out the global search;
6, the new U-touch gesture, Cut everything to turn on the flashlight and turn it around to turn on the camera, please check it in Settings->4D U-touch;
7. Fix the problem of background sound break of the game;
8. Fix the problem that the shutdown charge cannot be extinguished;
9. Repair the upgrade process phone stopped running problem of sporadic;
10, automatic optimization of backlight brightness curve, the backlight is too bright indoor solve the problem;
11, repair slip cut back on the desktop screen shot Small window interface stuck, unable to withdraw from the problem;
12, repair ultra-definition mode watching videos / landscape orientation games, even now question the status bar displays black bars;
13, is in the pocket repair mode, frequently light off screen calls Face Detecting problems that cause the phone to heat up;
14, repair power-saving mode / night power-saving open, even after a long standby, the APP can not access the Internet;
15, repair the call screen in the state of the call, press the power button to press the screen repeatedly, the caller animation does not display The problem;
16, repair even now through the fire line / gun warrior / stimulating the battlefield game interface screen brightness suddenly dimmed, the notification bar brightness adjustment is invalid.
Links credits to @ gfofanov
https://mega.nz/#!vuoA0SbJ!6HuGdtaNDV4XzNZbOeWB9fDiiP64kbcbo36_4j-8k-4
https://drive.google.com/file/d/10vJrO1-_-VdIV5rfhbYDuc6dUgxkoyjF/edit
New URLs:
https://mirrors.lolinet.com/firmware/lenovo/l78011/L78011_CN_OPEN_USER_Q00025.0_P_ZUI_10.5.254_ST_190404_qpst.zip
AND
https://office300-my.sharepoint.com/:u:/g/personal/fofanov_office300_onmicrosoft_com/EWzxvMBijR5Dk__iWz8RYuoB6rJ8jvNQjcdXts7J1UCQcg?e=pckW58
CUSTOM ROMS
MIUI
MIUI 10 [9.5.9] for LENOVO Z5 Android P Credits to Art Chen
Everything is working except Face Unlock
…….Images in attachment
https://mega.nz/#!YiB0XIJC!aykBuDqWxQWsbWc0kcNnBhtHy_5eqDO1Giw_avvj2WQ
MIUI 10 [9.3.14]17th March 2019 Update for LENOVO Z5 Android P Credits to Art Chen
his is already the third edition. @Art_Chen The author is still very diligent. Now I
have fixed the following problems:
Optimize the fluency of the system (the overall use is smoother, the gesture operation does not drop frames) to
improve the stability of the system (from Android 8.1 Upgraded to Android 9)
Fixed several bugs (fixed volte not available, aptX audio no sound, etc.)
https://drive.google.com/drive/folders/1NdveI-miKPs6RDf9yH9HIwDgJrkkWi5F
GDrive Link
MIUI 10 [9.2.21] for LENOVO Z5 Android P Credits to Art Chen
his is already the third edition. @Art_Chen The author is still very diligent. Now I
have fixed the following problems:
Optimize the fluency of the system (the overall use is smoother, the gesture operation does not drop frames) to
improve the stability of the system (from Android 8.1 Upgraded to Android 9)
Fixed several bugs (fixed volte not available, aptX audio no sound, etc.)
A small number of known bugs: fingerprint payment is not available (can be used with Tai Chi or Ed Xposed), there may be some bugs but I am temporarily
Didn't find Batterey Drain
Fix gps , theme , lockscreen wallpaper
If you are using miui, Update don't need to clear the data
DOWNLOAD:-
https://mega.nz/#!6rwQjA6B!z2xdnixiyCt5us6Cjeh9mIkgnqR4jnRLoiyZwt2Mink
BlueTooth Patch (Only if not working)
GDrive Link
MIUI 9.1.31 for LENOVO Z5 Android OREO Credits to Art Chen
Whats in this ZIP?
[attachment="15308074:miui.jpg"]
Download Link
Google Drive Link
BlueTooth Patch (Only if not working)
GDrive Link
BUGS:- No (If found Bluetooth issue use above given patch)
METHOD for FLASHING
1. Tools inside use them
2. OR use TWRP.
use at your own risk
Click to expand...
Click to collapse
PIXEL EXPERIENCE
* PE (10-05-2019): https://mega.nz/#!M65R0Qwa!OhxqBiOuU...cTXiQTTSIoGQdE
Bugs: Just Charging light else is clear
* PE (22-05-2019): https://mega.nz/#!9hxzBCjZ!QgoiTDZXOoAhHXDFWZ3GkBPrFPN2V7qlzLQt855ZLIw
Bugs: Just Charging light else is clear
* PE (06-06-2019): https://mega.nz/#!m3oVRaBY!KfFAG6mHiVsQCz2N1SixAHjg5GFaZbaRe-JO3Bz0CEg
Bugs: Just Charging light else is clear
* PE (18-06-2019): https://mega.nz/#!9xBD1AJB!atWWvl_0nXFXQxYT1gHjg9rzX6Kpqivtd7lawX_sEuw
Bugs: Just Charging light else is clear
************************************************************************
RESCRUSSION REMIX
* RR (16-04-2019): https://mega.nz/#!43hRxYJR!hwKWkOt3S...auq-EXSu7IrN8s
Bugs: Just Charging light else is clear
* RR (24-05-2019): https://www.androidfilehost.com/?fid=6006931924117883160
Bugs: Just Charging light else is clear
* RR (15-06-2019): https://drive.google.com/open?id=1p3d-itVhjkI4TdDZLzQSewHPAin6Y3R_
Bugs: Just Charging light else is clear
************************************************************************
HAVOC-OFFICIAL (No GApps)
Havoc-OS v2.6 Official Build (Credits to developer)
What's New (google translator):
* Added double tap for wake-up (must be supported by device / kernel)
* Added call recording to Dialer
* Added toggle switch for A -GPS
* Reduced minimum brightness
* Mi9 / Mi9SE fingerprints re-added to display (FOD)
* Added overlay (see OP) to enable cutout controller (hide label, ...)
* HAVOC (12-06-2019): Download Link
USEFUL BEFORE INSTLLATION
1. use 3.2.3 TWRP recovery for 4.0.474 (Link Here)
2. Flashed the same Boot Image on Partition A & B. (Boot + Vendor Image)
3. Than the Same Vendor Image.
FLASHING PROCEDURE
1 . Download TWR.img ( only single file now dont worry ) copy in one folder
2. connect phone to pc boot your phone to download mode
3. open cmd in that folder
4. type adb devices
5. type fastboot boot twrp.img for temporary if you want permenant fastboot flash boot twrp.img
6. fastboot reboot
7. now wipe everything
8. now flash the rom
9. remeber if you are on slot a rom will install on slot b and press reboot to recovery again after installing rom and now switch to slot b and select reboot system now your phone boots to slot b
10. if you are on slot b rom will install on slot a and press reboot to recovery again after installing rom and now switch to slot a and select reboot system now your phone boots to slot a
11. congratulations .
OTHERS/BETAs
10.5.254 [BETA 5] for LENOVO Z5 still BETA Android P
Applicable models: Lenovo Z5 (L78011)
Target version: 10.5.254 or higher
Basic version: 4.0.474/10.5.223
Upgrade package size: 90 Mb almost
push status: Public
following is the update content of 253 version.
will share Later
Download Links:- G-Drive credits to @M.Z.F
10.5.248 [BETA 4] for LENOVO Z5 still BETA Android P
Applicable models: Lenovo Z5 (L78011)
Target version: 10.5.248 or higher
Basic version: 4.0.474/10.5.223
Upgrade package size: 140 Mb
push status: Grayscale push
following is the update content of 248 version.
Fix the problem of background sound break of the game;
fix the problem that the shutdown charge cannot be extinguished;
fix the problem that the occasional phone stops running during the upgrade process;
fix the post-upgrade settings -> display And the problem of no brightness mode;
fix the problem that the camera menu is hidden after the top of the screen is displayed;
optimize the automatic brightness backlight curve to solve the problem of over-brightness in the room;
repair the activation of the overseas Internet, prompt to select the data master Card problem;
fix super clear mode to watch video, horizontal screen game, occasional status bar shows black bar problem;
repair connection Bluetooth After the headset dials the WeChat voice/video call, both sides have silent problems;
fix the called call in the lock screen state, press the power button multiple times to turn off the screen, the caller animation does not display the problem.
Download Links:- CloudMail credits to @gfofanov
ZUI 10.5.23 [BETA 3] for LENOVO Z5 still BETA Android P
Applicable models: Lenovo Z5 (L78011)
Target version: 10.5.230 or higher
Basic version: 4.0.474/10.5.223
Upgrade package size: 1.49 Gb
push status: Grayscale push
Upgrade the point of view
Upgrade Android 9.0 system;
new face recognition solution, need to re-enter facial information in settings -> password, fingerprint and face recognition;
new ZUI10 design style, add 4D U-touch gestures, magic input box, small window broadcast Video and other functions;
system optimization
New nighttime extreme power saving;
new application lock to support face unlocking mode;
new U health camera recognition calorie function;
new negative one-screen card display, support for step/off-work advice/fast payment, etc. ;
new desktop editing mode, support more desktop layout, please see the press to enter the desktop long;
the new control center and notification bar integration, and support on the desktop slide to bring up the global search;
new U-touch gestures, cut everything open flashlight Turn the camera on and turn it around, check in Settings -> 4D U-touch.
Download Links:- CloudMail - : - Mega
ZUI 10 (ported) for LENOVO Z5 Android OREO Credits to Ketai
I understand from guglotransleyta (but it's not exact):
Launcher 5.0 http://4pda.ru/pages/go/?u=https://...LrMKEhvRh0DVNwjccXmsIS3sCBb_AOCAvE&e=81841256
launcher 10.0 http://4pda.ru/pages/go/?u=https://...Dcu3z8zrAdTFCAiIopeOpKnjyf70vI7wYw&e=81841256
Firmware 3.9.075 https%3A%2F%2Fyadi.sk%2Fd%2FHHqqn2P73Zkmpn&e=75597985 (Password for archive: w3bsit3-dns.com)
Firmware 5.0 http://4pda.ru/pages/go/?u=https://...0cO7LPUOMAgwBrhHEyl8ofGvCycokfHbZU&e=81841256
Firmware 10.0 http://4pda.ru/pages/go/?u=https://...0pyMvNo3ckYJSnNm5Hdyqtrwh2NDbF6FCg&e=81841256
As I understand it, there should be 075 with the unlocking bootloader.
Those. The boot-loader is unlocked, debugging is enabled, then into the fastboot and we sew, the batch file in Chinese is full.
Steps:
1. Flash 3.9.075 via QPST (if you already have 3.9.075 leave this step)
2. Unlock Bootloader.
3. Flash TWRP.
4. Flash ZUI 5.
5. Flash ZUI 10
DONE!
BUGS:- None till now
Everything is at your own risk, I did not set myself.
Some link was such a translate in
https: //club.lenovo.co...hread-5412231-1-1.html
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON
How to FLASH MIUI/OTHER ROMS?
Always make a backup first. and copy the rom in your mobile
1. Boot into TWRP (means you must have bootloader unlocked and only 3.9.075 & 3.9.500 are capable to unlock bootloader)
2. Now in TWRP wipe the cache and dalvik with system
3. (a). Switch to IMG mode in TWRP.
(b). There are 3 image files in the downloaded ZIP folder named as images ( patched_boot,System & Vendor)
4. first flash System, than Vendor and last patch.
5. Done & REBOOT (it might said no ROM installed ignore it.
MIUI 10 is the only rom after flashing it you can go back to stock.
How to FLASH OFFICIAL ZUI 10.5.230?
1. Download
2. Upload to the root of the root memory
3. Rename the package to update.zip
4. Update it in 3 dots above in the official update application.
--------------------------------------------------------------------------------------------------------
wana GO BACK to STOCK from CUSTOM? Follow this post
TWRP for PIE? Follow this post
--------------------------------------------------------------------------------------------------------
Problems & There Solutions.
1. Have you ever get annoying thing like Insufficient storage to flash. Well today, for A/B device, we have got a the great guide for you!
http://oxygenosguide.lunarixus.party
* Notes that re-partitioning your device may cause the damages to your device. Do at your own risk!
* DO NOT TRY ON MOTO DEVICE!

Register your devices at this link to get the Z5 stable updates early than others
https://www.wjx.top/m/25027506.aspx
25-03-2019 : Update Official PIE ZUI 10.5.230 added
29-03-2019 : Update Official PIE ZUI 10.5.248 added
11-04-2019 : Update Official PIE ZUI 10.5.254 added
17-04-2019 : MIUI 10 [9.3.14] 17th March 2019 Update for LENOVO Z5 added
09-05-2019 : MIUI 10 [9.5.9] 9th May 2019 Update for LENOVO Z5 added
17-05-2019 : PE & RR [9.3.14] April & May updates Update for LENOVO Z5 added
19-05-2019 : Link for RETURNing FROM CUSTOM to OFFICIAL ROM added.
20-05-2019 : Link for backup of OFFCIAL ROM via TWRP added.
30-05-2019 : Link for RR update added.
08-06-2019 : Uploaded the official 10.5.306
14-06-2019 : Uploaded PE new Update.
15-06-2019 : Uploaded PE new Update.
16-06-2019 : Uploaded HAVOC OS official for Z5.
17-06-2019 : New Method for Returning to STOCK ZUI-10 added.(FOR those who were on ZUI-10 & for going Back to ZUI 10)
22-06-2019 : Uploaded 10.5.306 official full ROM for Z5.
23-06-2019 : Uploaded PixelExperience update for Z5.
30-05-2020 : Uploaded Stock Rom ZUI_4.0.4.74 update for Z5.

Miui
M.Z.F said:
Reserved
Click to expand...
Click to collapse
Miui rom is chinese rom. I wanna EU Rom. Please update EU Rom

1}
FLYME 7 for LENOVO Z5 Android OREO
will be posted later
.........
= When is FlyMe available?
2}
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON.............
= How do you know this and When is it officialy coming out?
3}
Do you have some screenshots of this Zui 10?

xperia_bird said:
1}
FLYME 7 for LENOVO Z5 Android OREO
will be posted later
.........
= When is FlyMe available?
2}
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON.............
= How do you know this and When is it officialy coming out?
3}
Do you have some screenshots of this Zui 10?
Click to expand...
Click to collapse
yes Flyme is vailable but very buggy thats why did not share over here.

xperia_bird said:
1}
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON.............
= How do you know this and When is it officialy coming out?
Click to expand...
Click to collapse
Beta Testing is in progress for official 9.

M.Z.F said:
Beta Testing is in progress for official 9.
Click to expand...
Click to collapse
Thats great! Can you give a timeline?

This custom ROM, is it also valid for the Lenovo Z5s L78071?

Wait for final release Pie.

hi,
is miui rom multi language rom?

raccoon616 said:
This custom ROM, is it also valid for the Lenovo Z5s L78071?
Click to expand...
Click to collapse
Noo

xperia_bird said:
These are not flashable ZIP files, you need to flash this with Fastboot. Please put this in your post, at least how to flash the files in the right way. Also the batch file in the ZIP is not readable by cmd.
I tryed your flashing steps and now the phone is not booting.
Click to expand...
Click to collapse
check OP

erdogan69 said:
hi,
is miui rom multi language rom?
Click to expand...
Click to collapse
Only CHINESE & ENGLISH

this is awesome MZF, can i use your download links in this thread ? I need to create a tutorial for going back to stock.
https://forum.xda-developers.com/pr...-how-to-flash-android-8-1-9-0-t3840839/page87

rendroid15 said:
this is awesome MZF, can i use your download links in this thread ? I need to create a tutorial for going back to stock.
https://forum.xda-developers.com/pr...-how-to-flash-android-8-1-9-0-t3840839/page87
Click to expand...
Click to collapse
For sure
MIUI 10 is the only rom after flashing it you can go back to stock. (Personally tested)

M.Z.F said:
For sure
MIUI 10 is the only rom after flashing it you can go back to stock. (Personally tested)
Click to expand...
Click to collapse
thank you for your work.
i tested first with zui5 and then zui10 they both booted successfully, the only problem i am facing is that vendor and persist doesnt mount, hence mobile network and wifi is not available, and you cant move past the activation screen, so i am working on that
it looks like it is not being mounted because of encryption, so i am force mounting it by flashing it in twrp.

I can't copy MUIU file to internal storage, it says file limit larger than device limit ?
It's more than 4gb

I am on Pie 9. Is that true if i flash MIUI 10, then using QFIL to flash stock Rom, and i can go back to stock???

creedsbg said:
I can't copy MUIU file to internal storage, it says file limit larger than device limit ?
It's more than 4gb
Click to expand...
Click to collapse
Copy it on usb or mmc or format your device on NTFS format FAT file system dosbnot support larger files.

vosathanh said:
I am on Pie 9. Is that true if i flash MIUI 10, then using QFIL to flash stock Rom, and i can go back to stock???
Click to expand...
Click to collapse
i did it and i was a lucky man. :good:

[ROM][Huawei][13] LeaOS - Lineage 20.0 for Huawei device (EMUI 9.1 version)

Non-Official Lineage 20.0 for EMUI 9 Huawei (ANE, FIG, POT, VTR, STF)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LeaOS is a project which based on LineageOS 20.1 with Andy Yan's and TrebleDroid GSI patches. I have added my personnals patches for Huawei devices : Encryption, Signal Strengh, Speed Boot, Assisted GPS, NFC, CAST/Miracast, Media App fixes, Camera HDR, SafetyNet etc..)
Changelog :
LeaOS Maarch 2023 version
Move to Android r35 (SPL Maarch)
Add offline charging
Add spoof model to pass safetynet
LeaOS February 2023 version
First release
Pre-requisite :
You must have TWRP installed if you want install patch. and a phone with unlock bootloader
Installation (crypt or uncrypt)
Download the version that corresponds to your Huawei phone model here and extract img file. You can choose with ou without GoogleApps
Flash system image : fastboot flash system <drag system.img here>
Flash twrp image: fastboot flash recovery_ramdisk <drag twrp img here>
Boot into twrp: power + vol+ while NOT connected to pc
Resize system: Wipe > Advanced Wipe > System > Repair or Change File System > Resize File System > Swipe
Wipe cache, dalvik/art cache, internal storage, data
(option) Install DRM patch for EMUI 9.1 to support DRM : 8-Huawei-FixPreav-AB-v1.3-signed.zip
(option) Install single modem patch for multi-sim device : 11-Huawei-MonoSim-AB-v1.1-signed.zip
reboot to System and set up the phone with Lineage first start assistant.
Enjoy !!!
Source Code:
https://github.com/Iceows
ROM OS Version: Android 13
ROM Kernel: Linux Huawei 4.9.148
ROM Firmware Required: EMUI 9.1
Based On: Lineage 20.0 and TrebleDroid
Credits:
@Frax3r (Testing)
@PHH
@eremitein
@RakinTheGreat (GCam)
@TureX (Kernel)
And all the others who tested my patches and helped me improve this ROM
Support Group
Channel update

Good news, I had just installed the 23/2/23 release and was going really good, except for the SIM card PIN request which was causing bootloop.After removed the PIN of the SIM card I was haven't any problem for the ROM which was running fine, but I could't fix a problem with mobile data which were not working even after re-set the correct APN and check with the dial number on phone info.
After all that I see the new release that I'm going to install RN.
Thanks for your work. Keep it UP!

I will try to fix this pin code and data problem. This is a problem that affects all dual sim huawei. Are you on dual sim?

AltairFR said:
Flash twrp image: fastboot flash recovery_ramdisk <drag twrp img here>
Click to expand...
Click to collapse
Is TWRP for Stanford (Honor 9) exist? Thanks

Smith Huang said:
Is TWRP for Stanford (Honor 9) exist? Thanks
Click to expand...
Click to collapse
Yes here
altairfr-huawei - Browse /TWRP-Recovery at SourceForge.net
sourceforge.net

AltairFR said:
I will try to fix this pin code and data problem. This is a problem that affects all dual sim huawei. Are you on dual sim?
Click to expand...
Click to collapse
Yes, It's a dual SIM phone. I have just one in it.Anyway I tried the no_gapps version and have not problem with data connection. I think is possibile it is a problem gapps related. Anyway I installed the new release with no gapps and installed LiteApp and works fine.

AltairFR said:
Yes here
altairfr-huawei - Browse /TWRP-Recovery at SourceForge.net
sourceforge.net
Click to expand...
Click to collapse
Thanks again!

It is so great to know that someone is still creating and maintaining honor 9 roms. However, I found a problem in this rom. I am a user from China and using China-mobile customized version STF-TL10 (Though I flashed it to normal China version of base firmware which is STF-AL10 EMUI:9.1.0.225, they are almost the same by the way.). I found there are 3 minor problems and my soloution to them, hope these information are useful to you:
1. rom with Gapps seems too big to flash into system partition, both TWRP and fastboot would just stop flashing process. I don't know why, but the non Gapps version plus "MindTheGapps-13.0.0-arm64-20221025_100653" works for me.
2. Battery Guru app and my own feeling about how fast is battery runs out indicate that the system can't enter deepsleep state and I think that is because of the kernel (maybe Kernel Suspending is not working). I flashed a custom kernel (https://github.com/maimaiguanfan/android_kernel_huawei_hi3660 I attached the file I used below) into the system by TWRP, then everything looks like it works normally.
3. developer USB debug mode will not work if you just turn it on until a system restart being applied. It is just a little bit annoying and I hope others get to know about this, so you won't waste time checking what is wrong...
Thanks for your hard work again! Have a nice day!

Is this project dead or is it in development

Not dead why ?

AltairFR said:
Not dead why ?
Click to expand...
Click to collapse
Oh ok cause I might install it

xqqy said:
It is so great to know that someone is still creating and maintaining honor 9 roms. However, I found a problem in this rom. I am a user from China and using China-mobile customized version STF-TL10 (Though I flashed it to normal China version of base firmware which is STF-AL10 EMUI:9.1.0.225, they are almost the same by the way.). I found there are 3 minor problems and my soloution to them, hope these information are useful to you:
1. rom with Gapps seems too big to flash into system partition, both TWRP and fastboot would just stop flashing process. I don't know why, but the non Gapps version plus "MindTheGapps-13.0.0-arm64-20221025_100653" works for me.
2. Battery Guru app and my own feeling about how fast is battery runs out indicate that the system can't enter deepsleep state and I think that is because of the kernel (maybe Kernel Suspending is not working). I flashed a custom kernel (https://github.com/maimaiguanfan/android_kernel_huawei_hi3660 I attached the file I used below) into the system by TWRP, then everything looks like it works normally.
3. developer USB debug mode will not work if you just turn it on until a system restart being applied. It is just a little bit annoying and I hope others get to know about this, so you won't waste time checking what is wrong...
Thanks for your hard work again! Have a nice day!
Click to expand...
Click to collapse
Good morning .
For partition size problems, it happens often, so I have developed a program to resize the system partition. He is on xda looking for Huawei partition tools.
For the battery I will look on my stf-l09. Have you tested with the aosp version of leaos?
For the USB problem, I did not see this problem.. thank you for the tests

Is this os pre-rooted? Cause I still wanna watch Netflix and stuff

uncognic said:
Is this os pre-rooted? Cause I still wanna watch Netflix and stuff
Click to expand...
Click to collapse
This OS have an option to pass safetynet, so you can use netflix

When i go to download recovery, im not sure which one to download between twrp-3.5.2-v1-figo-emui9.img, twrp-3.7.0_9-0-anne.img and twrp-3.7.0_9-0-anne.img. I have a Honor 9 STF-L09

With the last leaos, you can flash without twrp

Wait what. But the step-by-step giude asks me to flash twrp for a patch

uncognic said:
Wait what. But the step-by-step giude asks me to flash twrp for a patch
Click to expand...
Click to collapse
It is for drm and i don"t know if stf need
Use this twrp :
https://sourceforge.net/projects/altairfr-huawei/files/TWRP-Recovery/twrp-stf-ki960.img/download

xqqy said:
It is so great to know that someone is still creating and maintaining honor 9 roms. However, I found a problem in this rom. I am a user from China and using China-mobile customized version STF-TL10 (Though I flashed it to normal China version of base firmware which is STF-AL10 EMUI:9.1.0.225, they are almost the same by the way.). I found there are 3 minor problems and my soloution to them, hope these information are useful to you:
1. rom with Gapps seems too big to flash into system partition, both TWRP and fastboot would just stop flashing process. I don't know why, but the non Gapps version plus "MindTheGapps-13.0.0-arm64-20221025_100653" works for me.
2. Battery Guru app and my own feeling about how fast is battery runs out indicate that the system can't enter deepsleep state and I think that is because of the kernel (maybe Kernel Suspending is not working). I flashed a custom kernel (https://github.com/maimaiguanfan/android_kernel_huawei_hi3660 I attached the file I used below) into the system by TWRP, then everything looks like it works normally.
3. developer USB debug mode will not work if you just turn it on until a system restart being applied. It is just a little bit annoying and I hope others get to know about this, so you won't waste time checking what is wrong...
Thanks for your hard work again! Have a nice day!
Click to expand...
Click to collapse
Huawei Partition Kit - Enlarge system partition
Huawei Partition Kit This kit allows you to enlarge/reduce (2Go->5Go) the system partition on a Huawei kirin 65x, 960 or 970 phone. You can do it from a Huawei android 9 rom, a Lineage 18.1, 19.1, 20, or an AOSP 11,12 or 13. The kit reinstalls...
forum.xda-developers.com

Hi,
I gave this ROM a spin, but didn't get very far in the process documented in the FP.
First flashed TWRP from here with fastboot to recovery_ramdisk.
Code:
$ fastboot flash system LeaOS-20.0-20230304-iceows-google-stf.img
Invalid sparse file format at header magic
Sending sparse 'system' 1/7 (460241 KB) OKAY [ 11.774s]
Writing 'system' FAILED (remote: 'sparse flash write failure')
fastboot: error: Command failed
I also tried to flash from twrp with adb sideload, but that fails instantaneously.
And now I'm stuck with a phone that won't boot. Any suggestions how to proceed?
Btw, device is an STF-L09.

Development LITE OS based on Stock ROM for Realme Gt Neo 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LITE OS = Stock ROM - Bloatware + Optimization
​
As we have seen Realme Provides a good OS with some nice to have features and some extra things that are locked down and not available in Custom ROMs such as Floating Apps , Integrated App Lock , Dual System Profile , Various AOD themes nad better Battery Management to list a few.
But it has some serious flaws too like
1) Useless Apps like HOt Apps , heytap apps that cant be removed
2) Outdated drivers for GPU
3) Trackers in inbuilt apps and system
This LITE OS aims to fix all these issues and also add some nifty features that wont have any side effect on Stability of OS.
These features are
1) More Privacy
2) Faster Boot Time
3) Lower Idle System Resource Usage
4) 140+ unnecessary apps removed
5) Higher Read / Write speed than stock
6) Better Performance in Games and Heavy Task
7) Trackers and Loggers disabled or removed
8) Reduced excessive permissions for Google Apps
9) Updated GPU drivers to maximum supported version of v530
10) Removed some gimmicky features that only reduce performance of Device
The LITE OS is made from the most recent and stable OTA from INdian variant of Realme GT NEO 2 ,Other egion usrs can also install and try this ROM but there might be some possibility that some bugs may appear in future . Indian Variant is used because Chinese version has too many Chinese tracking apps , European Vertsion does not have Call recording feature , and Russian vartiant gets fewer updates . You can try either
Android 11 based LITE OS RUI2
Android 12 based LITE OS RUI3
Android 13 based LITE OS RUI4
WARNING
If you are proceeding and installing this software , you yourself would be only responsible for anu loss of data or destruction of device or its capabilities happen ,
Neither me , nor XDA will be responsible for your actions which you took yourself .
ABOUT​
This LITE OS has been in existence for nearly a year but after many people told me to publish it on XDA , I am releasing the latest version in May 2023 .
Prior to this 6 versions have been released on sourceforge along with Telegram , some older versions were lost as they were uploaded on Mega .
Requirements :-
You need unlocked bootloader device ​
Any custom recovery installed .​
Free space of About 10 GB in device or Pen Drive​
Ability to restore device , if it gets bricked beacuse of your own noviceness​
Instructions :-
Download the zip from download section and match checksum ​
Backup all apps , media and other data to pc or Pen-drive ​
Extract the Zip and copy paste files to Device main Storage ​
Boot into Custom Recovery flash the SuperPartition.img into super partition .​
And then flash the RUI_LITE_OS-firmware.zip , if the process completes successfully then only proceed to next step .​
Now comes an important step where you have to be careful ​
#) If You were previously on Stock ROM or custom ROM ....>> You need to wipe Dalvik , Cache , Data & Internal Storage i.e clean-flashing
OR
#) If You were on LITE OS before , you need to wipe Dalvik and Cache only i.e, dirty-flashing​
After wiping is done , reboot the phone to system and wait for it to boot , If you have followed the process correctly a yellow realme logo will show and within 5 minutes you will be greeted with a setup screen ,Complete the Setup and Enjoy a de-bloated and optimized device .
What to do after first boot ? (Suggested yet Optional)
Restore your data , either by Google or by Swift Backup / Migrate .
Reinstall the Realme UI Dialer App apk from extra folder and make it default app for calling and give all permissions .
After that root with Magisk delta if you want to use root and other modules
Let the device settle down for 2-3 hours , before saying it is lagging
What to Never Do ?
Switch off PHone or do this with process with less than 30% charge while flashing Firmware
Unroot from Magisk via unistaller zip or Magisk app (If you want to unroot just flash firmware package again )
To disturb the device while it is doing first boot
NOt backing-up data to external devices like PC or otg-pendrive
Installing Modules meant for AOSP or Custom ROMs
DOWNLOADS​
Click here to Download -> [RUI4_LITE_OS_F05] | (Size-4GB) | Update date 09/05/2023
Kindly Dont Mirror the ROM
Credits -
Satham for TWRP
Peter for suggesting optimizations
TheMalachite for making device trees
Andreock for Custom Dragon Kernel for LITE OS
Mr Delta and gang for support

Previous Versions of LITE OS
RUI4 based on Android 13
LITE OS F03
LITE OS F02
LITE OS F01
RUI3 based on Android 12
LITE OS C10
LITE OS C08
RUI2 based on Android 11
LITE OS A09

Tips
1)Kindly Use safetynet-fix by displax to fix safetynet integrity check failing

RMX3370 said:
View attachment 5907269
LITE OS = Stock ROM - Bloatware + Optimization
​
As we have seen Realme Provides a good OS with some nice to have features and some extra things that are locked down and not available in Custom ROMs such as Floating Apps , Integrated App Lock , Dual System Profile , Various AOD themes nad better Battery Management to list a few.
But it has some serious flaws too like
1) Useless Apps like HOt Apps , heytap apps that cant be removed
2) Outdated drivers for GPU
3) Trackers in inbuilt apps and system
This LITE OS aims to fix all these issues and also add some nifty features that wont have any side effect on Stability of OS.
These features are
1) More Privacy
2) Faster Boot Time
3) Lower Idle System Resource Usage
4) 140+ unnecessary apps removed
5) Higher Read / Write speed than stock
6) Better Performance in Games and Heavy Task
7) Trackers and Loggers disabled or removed
8) Reduced excessive permissions for Google Apps
9) Updated GPU drivers to maximum supported version of v530
10) Removed some gimmicky features that only reduce performance of Device
The LITE OS is made from the most recent and stable OTA from INdian variant of Realme GT NEO 2 ,Other egion usrs can also install and try this ROM but there might be some possibility that some bugs may appear in future . Indian Variant is used because Chinese version has too many Chinese tracking apps , European Vertsion does not have Call recording feature , and Russian vartiant gets fewer updates . You can try either
Android 11 based LITE OS RUI2
Android 12 based LITE OS RUI3
Android 13 based LITE OS RUI4
WARNING
If you are proceeding and installing this software , you yourself would be only responsible for anu loss of data or destruction of device or its capabilities happen ,
Neither me , nor XDA will be responsible for your actions which you took yourself .
ABOUT​
This LITE OS has been in existence for nearly a year but after many people told me to publish it on XDA , I am releasing the latest version in May 2023 .
Prior to this 6 versions have been released on sourceforge along with Telegram , some older versions were lost as they were uploaded on Mega .
Requirements :-
You need unlocked bootloader device ​
Any custom recovery installed .​
Free space of About 10 GB in device or Pen Drive​
Ability to restore device , if it gets bricked beacuse of your own noviceness​
Instructions :-
Download the zip from download section and match checksum ​
Backup all apps , media and other data to pc or Pen-drive ​
Extract the Zip and copy paste files to Device main Storage ​
Boot into Custom Recovery flash the SuperPartition.img into super partition .​
And then flash the RUI_LITE_OS-firmware.zip , if the process completes successfully then only proceed to next step .​
Now comes an important step where you have to be careful ​
#) If You were previously on Stock ROM or custom ROM ....>> You need to wipe Dalvik , Cache , Data & Internal Storage i.e clean-flashing
OR
#) If You were on LITE OS before , you need to wipe Dalvik and Cache only i.e, dirty-flashing​
After wiping is done , reboot the phone to system and wait for it to boot , If you have followed the process correctly a yellow realme logo will show and within 5 minutes you will be greeted with a setup screen ,Complete the Setup and Enjoy a de-bloated and optimized device .
What to do after first boot ? (Suggested yet Optional)
Restore your data , either by Google or by Swift Backup / Migrate .
Reinstall the Realme UI Dialer App apk from extra folder and make it default app for calling and give all permissions .
After that root with Magisk delta if you want to use root and other modules
Let the device settle down for 2-3 hours , before saying it is lagging
What to Never Do ?
Switch off PHone or do this with process with less than 30% charge while flashing Firmware
Unroot from Magisk via unistaller zip or Magisk app (If you want to unroot just flash firmware package again )
To disturb the device while it is doing first boot
NOt backing-up data to external devices like PC or otg-pendrive
Installing Modules meant for AOSP or Custom ROMs
DOWNLOADS​
Click here to Download -> [RUI4_LITE_OS_F05] | (Size-4GB) | Update date 09/05/2023
Kindly Dont Mirror the ROM
Credits -
Satham for TWRP
Peter for suggesting optimizations
TheMalachite for making device trees
Andreock for Custom Dragon Kernel for LITE OS
Mr Delta and gang for support
Click to expand...
Click to collapse
Thanks for the efforts. Last time I've tried LITE OS I couldn't setup 4-digit PIN, only 6-digits, it was throwing me out of the settings, probably because some excessive debloat. Could you kindly tell if that doesn't happen now? Thanks again

Thank you for sharing it here. I tried f03, and I had trouble with sending sms and doing calls. Hopefully, this is fixed in this version...

Any important differences between European and Indian versions apart from the European not having the call recorder?
Edit: For some reason, on the Play Store, it says Rocket League Sideswipe is not compatible with my device, won't even let me download it... Although I downloaded it from APKPure and it seems to work fine.

rtkpX said:
Any important differences between European and Indian versions apart from the European not having the call recorder?
Edit: For some reason, on the Play Store, it says Rocket League Sideswipe is not compatible with my device, won't even let me download it... Although I downloaded it from APKPure and it seems to work fine.
Click to expand...
Click to collapse
No major difference between EU or Indian variant , Indian variant preferred for call recording feature

Does the Android 13 version support Gpu drivers V707?

I've tried all the versions. All the versions, you can't do calls or send sms in China...

george343456 said:
Does the Android 13 version support Gpu drivers V707?
Click to expand...
Click to collapse
No support for any driver above v530 as it will cause camera failure and random crashes and lags

Shiw Liang said:
I've tried all the versions. All the versions, you can't do calls or send sms in China...
Click to expand...
Click to collapse
I think it is because ORoaming is removed , it is required app for Chinese SIM to function but not for Global SIMs and since it tracks and keeps record of calls being made it was removed from LITE OS , and because of this ,Lite OS may not be compatible with Chinese Telecom Operators

RMX3370 said:
No support for any driver above v530 as it will cause camera failure and random crashes and lags
Click to expand...
Click to collapse
Now V690 for openGL And Vulkan camera work!

Where i can find SuperPartition.img?

Rxfireblade said:
Where i can find SuperPartition.img?
Click to expand...
Click to collapse
Stock one ?
Lite OS one is inside the zip , you will get it after extracting the zip

RMX3370 said:
Stock one ?
Lite OS one is inside the zip , you will get it after extracting the zip
Click to expand...
Click to collapse
Ok perfect,THX