Related
Hello I upgraded few days ago from P9 plus to Mate 9 and stupid me that i followed the same P9 plus method to install oreo on the mate 9
I installed huawei firmware finder and download oreo from it which automatically installed and after that its stuck at erecovery and asking to download new recovery when i try it it fails then only other options are to reboot and shutdown anyone know any way out of it
awais_666 said:
Hello I just upgraded from P9 plus to Mate 9 and stupid me that i followed the same P9 plus method to install oreo on the mate 9
I installed huawei firmware finder and download oreo from it which automatically installed and after that its stuck at erecovery and asking to download new recovery when i try it it fails then only other options are to reboot and shutdown anyone know any way out of it
Click to expand...
Click to collapse
me too, and I tried the hisuite to recovery, it show up "not support this model", is there anyone can help?
odeeew said:
me too, and I tried the hisuite to recovery, it show up "not support this model", is there anyone can help?
Click to expand...
Click to collapse
lets see i checked other threads here seems like not much help available on it it is stuck at huawei erecovery
It is going to get hard bricked,my did when battery drained. Now nothing cant charge,pc doesn't recognise it,cant boot it. Sent it to service centre bcs it is under warranty i lied to them i told them it shut down during playing a game. I didn't hear from them yet.
I have also the same issue... phone stuck at eRecovery...Please need some assistance here
Szilard666 said:
It is going to get hard bricked,my did when battery drained. Now nothing cant charge,pc doesn't recognise it,cant boot it. Sent it to service centre bcs it is under warranty i lied to them i told them it shut down during playing a game. I didn't hear from them yet.
Click to expand...
Click to collapse
its weird there own software gave the update and performed the update i wish i just had followed xda in advance to see how to do it lets see if any developer could help
please tell me u got a solution for this
Waleedaligomaa said:
please tell me u got a solution for this
Click to expand...
Click to collapse
nop no solution yet still its not working i found a HWOTA method which isnt hard but problem is my bootloader is locked i can go to fastboot and erecovery but as bootloader is locked i cant progress in any of the steps i even have the unlock code also tryed the dc unlocker which is useless too as it only gives you unlock code and doesnt unlock you there was oeminfo method too but all methods need permission to write something through adb which i dont have but i wont give up
i have the exact problem have been searching here nd there but useless so far / i will keep u updated if i found a solutin
Waleedaligomaa said:
i have the exact problem have been searching here nd there but useless so far / i will keep u updated if i found a solutin
Click to expand...
Click to collapse
thanks mate i hope some developer might be able to find some solution
If you can enter fastboot you should be able to unlock bootloader. Just download HWOTA and necessary files and rename them properly. Put them on an SD card and let HWOTA prompt u for bootloader key.
crusht said:
If you can enter fastboot you should be able to unlock bootloader. Just download HWOTA and necessary files and rename them properly. Put them on an SD card and let HWOTA prompt u for bootloader key.
Click to expand...
Click to collapse
yes i tryed the same directions but the problem is there is no oem unlock permission given from software so HWOTA cant write any file on the system
yes exactly fastboot is totally useless because there is no oem unlock permission
i think our only way out is dload update .... placing update.app on internal storage is the problem here
is there anyway to push file into internal through fastboot ? ?
i tried placing update.app on sd card but no use .. i think it must be on internal storage
Waleedaligomaa said:
yes exactly fastboot is totally useless because there is no oem unlock permission
i think our only way out is dload update .... placing update.app on internal storage is the problem here
is there anyway to push file into internal through fastboot ? ?
i tried placing update.app on sd card but no use .. i think it must be on internal storage
Click to expand...
Click to collapse
its actual method is also to keep update.app in sd card so it wont work through internal storage also so still no hope i tryed the sd card method it doesnt work because recovery has been replaced and partitions are disturbed as well
i dont understand
why it want work through internal storage ?
Waleedaligomaa said:
i dont understand
why it want work through internal storage ?
Click to expand...
Click to collapse
because dload method is suppose to be done from external sd card and second thing is our recovery has been damaged which flashes the firmware right now try everything and see what works one guy has given method of changing dns etc
Waleedaligomaa said:
i dont understand
why it want work through internal storage ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
this method might work but i cant find the oem info file for my phone my model is MHA-L09C342
https://forum.xda-developers.com/mate-9/development/oeminfo-library-t3555353
i will try and report
---------- Post added at 10:21 AM ---------- Previous post was at 09:42 AM ----------
cant push oeminfo file .....says adb error device null ... or i mustnt flash it ?!
really confused with the procedure
Waleedaligomaa said:
https://forum.xda-developers.com/mate-9/development/oeminfo-library-t3555353
i will try and report
---------- Post added at 10:21 AM ---------- Previous post was at 09:42 AM ----------
cant push oeminfo file .....says adb error device null ... or i mustnt flash it ?!
really confused with the procedure
Click to expand...
Click to collapse
i am trying it without the oem info lets see if it helps
awais_666 said:
i am trying it without the oem info lets see if it helps
Click to expand...
Click to collapse
i have oem for my model, but what im supposed to do with it ?
Hi everyone. Al10 64 gb chinese variant. Rebranded to l19(ruropean) b360(nougat)
Everything worked great until yesterday an ota appeared. My friend flashed it before asking me. I believe it was a small and not proper update and now phone only boots into erecovery....
Is there anyway to recover the photos/videos before rollbacking (dload method to android m) the phone? There were many of photos-videos around christmas.
Please help. Thank you
SUMMERBREEZE said:
Hi everyone. Al10 64 gb chinese variant. Rebranded to l19(ruropean) b360(nougat)
Everything worked great until yesterday an ota appeared. My friend flashed it before asking me. I believe it was a small and not proper update and now phone only boots into erecovery....
Is there anyway to recover the photos/videos before rollbacking (dload method to android m) the phone? There were many of photos-videos around christmas.
Please help. Thank you
Click to expand...
Click to collapse
Mmm, i dont know if hi suite works also in erecovery. You could try to plug the phone to a pc with hi suite, and see if there are still photos and video
Just dload the same firmware you had before. It wont wipe anything. do not wipe, just dlaod the firmware and boot. Your data will remain there.
If nothing work, you should try the "unbrick" section of the excellent "Huawey Multi tool" :
https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
I have read about this problem on another thread but the problem was poorly explained and i couldn't follow to the processes explained on the replies, so i have created another new thread regarding this problem, because, in addition to being very useful for me, it might be even more useful for people that are searching for a solution.
I will explain briefly the scenario before talking about the problem itself.
I recently (1d ago) got my telephone blocked because of a Hard Brick that i managed to overcome using
DC Phoenix, from which i installed Emui 4.1 and then automatically updated via the built-in updater to Emui 5.0
As before my hard brick i was on a more recent build, Emui 5.1 (B394), i searched on the internet and understood that my current Firmware, "NRD90M test-keys" is a test build (or something like that) which can't be updated with the built-in updater.
So, i want to ask, in order to avoid getting bricked again, if there is a way i can update to the latest Emui available for my device, as in the current state the build, in addition to being obsolete, is also unstable and reports some compatibility errors, E.G. error retrieving microphone service when sending audio messages on WhatsApp, ecc.
i have heard of a method consisting of rolling-back the device to 4.1 again and installing 5.1 via Dload, but can you tell me how to do it more in detail?
EDIT:
Problem solved by rolling back to 4.1 b131 and then updated from internal updater app
Thanks in advance,
Federico
Federico Cervelli said:
I have read about this problem on another thread but the problem was poorly explained and i couldn't follow to the processes explained on the replies, so i have created another new thread regarding this problem, because, in addition to being very useful for me, it might be even more useful for people that are searching for a solution.
I will explain briefly the scenario before talking about the problem itself.
I recently (1d ago) got my telephone blocked because of a Hard Brick that i managed to overcome using
DC Phoenix, from which i installed Emui 4.1 and then automatically updated via the built-in updater to Emui 5.0
As before my hard brick i was on a more recent build, Emui 5.1 (B394), i searched on the internet and understood that my current Firmware, "NRD90M test-keys" is a test build (or something like that) which can't be updated with the built-in updater.
So, i want to ask, in order to avoid getting bricked again, if there is a way i can update to the latest Emui available for my device, as in the current state the build, in addition to being obsolete, is also unstable and reports some compatibility errors, E.G. error retrieving microphone service when sending audio messages on WhatsApp, ecc.
i have heard of a method consisting of rolling-back the device to 4.1 again and installing 5.1 via Dload, but can you tell me how to do it more in detail?
Thanks in advance,
Federico
Click to expand...
Click to collapse
This Should Help You.
https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445
I assume since you rolled back you have a locked bootloader atm.
Now i know these guides are somewhere but now that you mention it they do seem somewhat hard to find. ( on the app anyways)
But as for rolling back and then updating again via dload ( not TWRP) you need the rollback package and official firmware for your phone model.
Google and/or the guides section here should help you find those.
It should give you two zips containing an UPDATE.APP file each.
You need to put these on a folder named dload (one file at a time)on your sdcard( internal storage should do, too but no guarantees).
Create the folder if it doesn't exist.
Put in the rollback update.app in first.
Then power down and hold vol up+ vol down while powering up and it should flash the file.
Let it finish, boot up, put in the update.app from the firmware in the dload folder ( remove the old file) and repeat the process.
That should be it.
Also, you might be able to sinply dload the actual firmware from the test key build without rolling back but i haven't tried ( i think )
Should the dload process fail, you most likely have the wrong file in your dload folder, or multiple files.
I should mention that the rollback file actually brings you to a test.keys build. It's necessary to flash to full firmware afterwards and dloading the rollback file has always worked for me.
Personally i found that keeping the rollback update.app file for the rollback in the dload folder at all times is a good security measure. (besides the usual backups)
Sent from my OnePlus5 using XDA Labs
SharxX8 said:
I assume since you rolled back you have a locked bootloader atm.
Now i know these guides are somewhere but now that you mention it they do seem somewhat hard to find. ( on the app anyways)
But as for rolling back and then updating again via dload ( not TWRP) you need the rollback package and official firmware for your phone model.
Google and/or the guides section here should help you find those.
It should give you two zips containing an UPDATE.APP file each.
You need to put these on a folder named dload (one file at a time)on your sdcard( internal storage should do, too but no guarantees).
Create the folder if it doesn't exist.
Put in the rollback update.app in first.
Then power down and hold vol up+ vol down while powering up and it should flash the file.
Let it finish, boot up, put in the update.app from the firmware in the dload folder ( remove the old file) and repeat the process.
That should be it.
Also, you might be able to sinply dload the actual firmware from the test key build without rolling back but i haven't tried ( i think )
Should the dload process fail, you most likely have the wrong file in your dload folder, or multiple files.
I should mention that the rollback file actually brings you to a test.keys build. It's necessary to flash to full firmware afterwards and dloading the rollback file has always worked for me.
Personally i found that keeping the rollback update.app file for the rollback in the dload folder at all times is a good security measure. (besides the usual backups)
Sent from my OnePlus5 using XDA Labs
Click to expand...
Click to collapse
can you tell me what rollback package to use? i tried "(FRD-L19&L09, from Android 7.0, EMUI 5.0 to Android 6.0 EMUI 4.1, C900B300, Western Europe)" and didn't work
If you have an L09/19 it should work. Just make sure to flash the rollback package first.
Otherwise since you are on a test key build already, you might want to try to dload MM directly or if that doesn't work, try a stock nougat firmware via dload.
You could also try updating with Firmware Finder via proxy
Sent from my OnePlus5 using XDA Labs
SharxX8 said:
If you have an L09/19 it should work. Just make sure to flash the rollback package first.
Otherwise since you are on a test key build already, you might want to try to dload MM directly or if that doesn't work, try a stock nougat firmware via dload.
You could also try updating with Firmware Finder via proxy
Sent from my OnePlus5 using XDA Labs
Click to expand...
Click to collapse
i'm at 4.1 b131, now should i update via updater (ver. L09C432B380 2,36GB) or it's test keys?
Federico Cervelli said:
i'm at 4.1 b131, now should i update via updater (ver. L09C432B380 2,36GB) or it's test keys?
Click to expand...
Click to collapse
If you are on a regular version of MM, as I understand it, you can update normally, yes
SharxX8 said:
If you are on a regular version of MM, as I understand it, you can update normally, yes
Click to expand...
Click to collapse
but last time i did it it brang me to test keys .-.
EDIT: i tried and it's all working, Thanks!
Federico Cervelli said:
I have read about this problem on another thread but the problem was poorly explained and i couldn't follow to the processes explained on the replies, so i have created another new thread regarding this problem, because, in addition to being very useful for me, it might be even more useful for people that are searching for a solution.
I will explain briefly the scenario before talking about the problem itself.
I recently (1d ago) got my telephone blocked because of a Hard Brick that i managed to overcome using
DC Phoenix, from which i installed Emui 4.1 and then automatically updated via the built-in updater to Emui 5.0
As before my hard brick i was on a more recent build, Emui 5.1 (B394), i searched on the internet and understood that my current Firmware, "NRD90M test-keys" is a test build (or something like that) which can't be updated with the built-in updater.
So, i want to ask, in order to avoid getting bricked again, if there is a way i can update to the latest Emui available for my device, as in the current state the build, in addition to being obsolete, is also unstable and reports some compatibility errors, E.G. error retrieving microphone service when sending audio messages on WhatsApp, ecc.
i have heard of a method consisting of rolling-back the device to 4.1 again and installing 5.1 via Dload, but can you tell me how to do it more in detail?
EDIT:
Problem solved by rolling back to 4.1 b131 and then updated from internal updater app
Thanks in advance,
Federico
Click to expand...
Click to collapse
I am in a very similar situation and unable to solve this. Could some one help in this?
I had unlocked bootload, TWRP and Root. I decided to unroot and lock the bootloader. So, by following the steps mentioned in a different thread, I could successfully flash Marshmallow B130 through Force Update.
Steps followed:
1. Flash Rollback package
2. Flash Full OTA (Marshmallow on B130) from Huawei website which flashed
Now, the real problem started while trying to upgrade to Nougat.
I tried downloading B350 firmware from Firmware Finder. After slow download, it installs fine. But, after reboot I face below problems.
1. The OS is very sluggish and crashes so often
2. The build number says NRD***-test keys
3. No keyboard installed, so not able to login to Google as well.
4. At this point, Factory Reset, Wipe Cache Partition, rollback everything fails.
I had to unlock the bootloader and again force update Rollback Package and then to Marshmallow B130.
Now, I am stuck with B130. I tried downloading B340 and B361 thru Firmware Finder. Both of them installed but with the same result. I mean No keyboard, Test-keys build, Crashes
My Honor 8 model: FRD-L02
What should I do upgrade to Nougat? I have no confidence in Firmware Finder method. Any help appreciated
It's EMUI 5.0.1 not 5.1, I think.
My p9 lite is VNS-L22C706B120. I never upgraded it since I bought it in New Zealand, though I have received notification of updating to B130 for a long while.
Recently I tried updating to B130 in order to get Android 7 finally, but got problem that the successful update takes no effect at all. I still remain at B120 and keep receiving update notification to B130. I described my steps recently as below:
Try Updater
First of all, I tried using Updater downloading the package and install, it says update failed because the package it not found. I found the reason is the update package is stored in internal storage other than SD card. Then I created dload folder and moved update package to SD card, but Updater cannot detect it and keep telling me to download B130. Therefore, I tried pressing Volume Up, Down and Power button together. Then the package is detected and installing started. It is very fast and I was told install success. However, after rebooting I still have B120 and am told to update to B130 by Updater.
Unlock bootloader and root
Yesterday, I decided to try custom ROM, so I managed to unlock the bootloader, install TWRY and root the phone, though I still cannot make B130 update take effect. I searched for a few custom Rom with Android 7, but I found they still required a higher firmware version than B120, like this ROM, which requires EMUI 5.X.
The help I need
I wonder if I can flash the ROMS that require a higher firmware version when I only got B120 firmware. If I cannot, how can I get my firmware updated, through Updater or any other way (like TWRY possibly) ?
I hope I have stated my problem properly so that you guys can understand. I appreciate any suggestions!
Jlw_ said:
My p9 lite is VNS-L22C706B120. I never upgraded it since I bought it in New Zealand, though I have received notification of updating to B130 for a long while...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3461043
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
First of all, sorry for both repeating the topic, and for my ignorance!
I have an Honor 8 which is stuck on FRD-L09C432B394 and Android security patch level: 5 August 2017. I have received at least 2 OTA updates since I purchased the device almost 2 years ago but not since September last year (2017)!
I’m in the UK, I did not do anything with the device since I purchased it, and using the latest HiSuite version (HiSuite 8.0.1.300_OVE), no updates available either!
I downloaded a ROM from // huawei - firmware com/ (Sorry, can’t post links!) which is holds the description:
Build: FRDL09C432B521 800521FRDL19C432B521 800521FRDL02C432B521 800521
Android: 8.x - Oreo
Emui: 8.0
Size: 1.38GB
When I unzip this file I only copied UPDATE.APP to dload on MicroSD card, when trying to update via *#*#2846579#*#*, it starts but then fails at 5%!
Now I did some research and it seems like there’s more files required to update, when I unzip the downloaded ROM I only get the following files though:
full_mainpkg.tag (1KB)
new_filecontext_system (27KB)
new_filecontext_vendor (49KB)
UPDATE.APP (2,920,857KB)
VERSION.mbn (1KB)
And one folder named META-INF containing a few files.
When I did some research it seems like the files required are:
1) update.zip
2) update_full_xxxx_yyyy.zip ("xxxx" and "yyyy" = depending from hardware model/region)
3) update_data_full_public.zip
Where do I get these from? Is it UPDATE.APP or update.zip?
What am I missing? And if anyone knows, why am I not getting the update via HiSuite?
Thank you in advance!
YorkiEg said:
First of all, sorry for both repeating the topic, and for my ignorance!
I have an Honor 8 which is stuck on FRD-L09C432B394 and Android security patch level: 5 August 2017. I have received at least 2 OTA updates since I purchased the device almost 2 years ago but not since September last year (2017)!
I’m in the UK, I did not do anything with the device since I purchased it, and using the latest HiSuite version (HiSuite 8.0.1.300_OVE), no updates available either!
I downloaded a ROM from // huawei - firmware com/ (Sorry, can’t post links!) which is holds the description:
Build: FRDL09C432B521 800521FRDL19C432B521 800521FRDL02C432B521 800521
Android: 8.x - Oreo
Emui: 8.0
Size: 1.38GB
When I unzip this file I only copied UPDATE.APP to dload on MicroSD card, when trying to update via *#*#2846579#*#*, it starts but then fails at 5%!
Now I did some research and it seems like there’s more files required to update, when I unzip the downloaded ROM I only get the following files though:
full_mainpkg.tag (1KB)
new_filecontext_system (27KB)
new_filecontext_vendor (49KB)
UPDATE.APP (2,920,857KB)
VERSION.mbn (1KB)
And one folder named META-INF containing a few files.
When I did some research it seems like the files required are:
1) update.zip
2) update_full_xxxx_yyyy.zip ("xxxx" and "yyyy" = depending from hardware model/region)
3) update_data_full_public.zip
Where do I get these from? Is it UPDATE.APP or update.zip?
What am I missing? And if anyone knows, why am I not getting the update via HiSuite?
Thank you in advance!
Click to expand...
Click to collapse
The only method to install Oreo without unlocking bootloader is to flash via HiSuite... Have you tried?
ScardracS said:
The only method to install Oreo without unlocking bootloader is to flash via HiSuite... Have you tried?
Click to expand...
Click to collapse
I'm not sure if you mean flash via HiSuite as in downloading the Oreo ROM then use HiSuite to install it? Or just use HiSuite to check for updates and let it install it?
I do have the latest version of HiSuite (8.0.1.300_OVE) installed. Checking for updates through the software says that I've got the latest official version
YorkiEg said:
I'm not sure if you mean flash via HiSuite as in downloading the Oreo ROM then use HiSuite to install it? Or just use HiSuite to check for updates and let it install it?
I do have the latest version of HiSuite (8.0.1.300_OVE) installed. Checking for updates through the software says that I've got the latest official version
Click to expand...
Click to collapse
Oh, I'm sorry.
You could try method posted on my signature for flashing b399 and then watch if it update to b407
ScardracS said:
Oh, I'm sorry.
You could try method posted on my signature for flashing b399 and then watch if it update to b407
Click to expand...
Click to collapse
You Sir are a genius! :good::good:
I didn’t have the time to try it last week but I just did and miraculously your 2 Update.app files have worked and flashed my device to B399!
Immediately after I got an OTA update to B404! But stuck there unfortunately! No updates available OTA nor on HiSuite after B404! Also trying to instal B407 via dload keeps failing at 5% every time! I read in your thread saying you haven’t done anything to the B399 file? Just deleted ‘Other files’ and rezipped? It worked anyway! Would be great if you could advise me on how to do it for a B407 or B521! If not, you’re still a genius!
Stuck on B404 now! An upgrade from B394, but wouldn’t mind moving up the line a bit!
YorkiEg said:
You Sir are a genius! :good::good:
I didn’t have the time to try it last week but I just did and miraculously your 2 Update.app files have worked and flashed my device to B399!
Immediately after I got an OTA update to B404! But stuck there unfortunately! No updates available OTA nor on HiSuite after B404! Also trying to instal B407 via dload keeps failing at 5% every time! I read in your thread saying you haven’t done anything to the B399 file? Just deleted ‘Other files’ and rezipped? It worked anyway! Would be great if you could advise me on how to do it for a B407 or B521! If not, you’re still a genius!
Stuck on B404 now! An upgrade from B394, but wouldn’t mind moving up the line a bit!
Click to expand...
Click to collapse
For b406 and/or b407 I think you have to expect a bit
ScardracS said:
For b406 and/or b407 I think you have to expect a bit
Click to expand...
Click to collapse
I’m not sure what do you mean? Do I need to expect a bit of patience to get B406/7? I don’t have any patience left, I've had enough with Huawei
I’ve downloaded about 6 different firmware files from B405 to B521, I always tried the FullOTA-MF files first, then OTA-MF, all keeps failing at 5% but I ALWAYS get the ‘Software install failed’ message at 5% every time I try the SD Card\dload\UPDATE.APP method Are the firmware files I’m downloading corrupt? Your files did work so I don't think it's anything to do with my phone, but your files are the only ones that worked! I can't get my head around it
YorkiEg said:
I’m not sure what do you mean? Do I need to expect a bit of patience to get B406/7? I don’t have any patience left, I've had enough with Huawei
I’ve downloaded about 6 different firmware files from B405 to B521, I always tried the FullOTA-MF files first, then OTA-MF, all keeps failing at 5% but I ALWAYS get the ‘Software install failed’ message at 5% every time I try the SD Card\dload\UPDATE.APP method Are the firmware files I’m downloading corrupt? Your files did work so I don't think it's anything to do with my phone, but your files are the only ones that worked! I can't get my head around it
Click to expand...
Click to collapse
You first have to check if installation of each firmware is approved using Firmware Finder app. If it says it's not approved, it will fail at 5%, so there is no point downloading them
For me on my L09-C432, 406 was approved but was not displayed in system update app, I had to use Firmware Finder proxy to send it to system update app. Then I got 407, and could update to Oreo using hisuite on PC.
This method will fail on newer versions, but if 406 is approved for you and not displayed in system update app you can try it.
pix106 said:
You first have to check if installation of each firmware is approved using Firmware Finder app. If it says it's not approved, it will fail at 5%, so there is no point downloading them
For me on my L09-C432, 406 was approved but was not displayed in system update app, I had to use Firmware Finder proxy to send it to system update app. Then I got 407, and could update to Oreo using hisuite on PC.
This method will fail on newer versions, but if 406 is approved for you and not displayed in system update app you can try it.
Click to expand...
Click to collapse
That’s what’s frustrating me, all the firmware files I’ve downloaded are approved for my device Or so does Firmware Finder app says! Yet they all fail to install at 5%!
Proxy method doesn’t work on B404, or at least not working for me So nothing is working now
I’ve had enough with this phone, just to avoid smashing it into a wall next time it drives me crazy, I’m looking to get another phone, Xiaomi Mi A2 might be the one. Still looking though
Successful update
Frustrated as I was I decided to try one last time and I’m running Oreo now
Trick is to use the official Honor rollback package from Android 7.0 to Android 6.0 (B131 in UK), let it preform OTA update back to Android 7 (B380 if I remember correctly) then use Firmware Finder application's in-app proxy to let the phone do the update at this stage! And it worked!
It downloaded the ROM files then when download completed it said the package has changed and requested to download again! I downloaded that and it started installation! Everything went well during installation but at the end it said it has failed because it could not find the update package I thought it failed and restarted the device only to find it running Android 8 and EMUI 8! Full reset and all working flawlessly
HiSuite acknowledges the update and offers to rollback to B407 if you’re having problems! Please note that I was stuck on B394! So even rolling back would be an upgrade
I’ve tested different apps, NFC (I never use it for contactless payments though so can’t confirm that, but I can’t see why it wouldn’t work) Also GPS and everything’s working just fine! Only issue is/was battery draining but that’s due to the auto launch in battery settings! I changed some of the application settings into manual launch and all great now!
Thank you for all those who helped :good: And hopefully this might help some of the frustrated Honor 8 users like myself! And hopefully won’t be stuck on B521 now!
YorkiEg said:
Trick is to use the official Honor rollback package from Android 7.0 to Android 6.0 (B131 in UK)
Click to expand...
Click to collapse
Sorry for the possibly stupid question, but how did you find/apply the rollback package? Was it through firmware finder or is there some other way?
Himmagery said:
Sorry for the possibly stupid question, but how did you find/apply the rollback package? Was it through firmware finder or is there some other way?
Click to expand...
Click to collapse
No such thing as stupid question! We all need to start somewhere
Finding the rollback package is via the official Honor support website for (Preferably) the country where you purchased your handset from. Or if it was EU, any EU country.
Rollback process will be executed by downloading and unzipping 2 files, the Honor 8_Rollback Package_FRD-L09_from Android 7.0 EMUI 5.0 to Android 6.0 EMUI 4.1_C900B300 (Around 75 MB in size) and the Honor 8_Firmware_FRD-L09_Android 6.0_EMUI 4.1_CXYZB131 (Around 1.75GB in size).
Next you should have a MicroSD Card installed, formatted, and create a folder on root called dload.
Then Unzip the files you downloaded, will get you 2 Update.app files, copy the first one (From C900B300) to the dload folder, switch phone off, press Volume-, Volume+ and the Power button and don’t let go till system starts updating, this one won’t take long.
When finished, format you MicroSD Card, create dload folder again, then copy the second Update.app file (From CXYZB131) into the folder, same button combination to update. This update will take longer.
When finished, try Firmware Finder app immediately if you can and use the in-app proxy method to let your phone do the update, if it didn't work, let the phone do OTA update but don’t let it update too many times because Firmware Finder doesn’t work with newer System Update apps.
Hope that helps. And good luck :good:
YorkiEg said:
Frustrated as I was I decided to try one last time and I’m running Oreo now
Trick is to use the official Honor rollback package from Android 7.0 to Android 6.0 (B131 in UK), let it preform OTA update back to Android 7 (B380 if I remember correctly) then use Firmware Finder application's in-app proxy to let the phone do the update at this stage! And it worked!
Click to expand...
Click to collapse
Thanks for the post, finally got some time where I could try this out and i'm now upgraded to 8.0 from the B394 I was previously stuck on.
I noticed a huge lag when first running 8.0 but it seems to have settled.
For me everything seems to be running just fine, all my apps works, all hardware works and, as far as I can see in 0.5 days use the phone runs it all about as good as it did on 7.0 after the initial lag that is
darklighthim said:
Thanks for the post, finally got some time where I could try this out and i'm now upgraded to 8.0 from the B394 I was previously stuck on.
I noticed a huge lag when first running 8.0 but it seems to have settled.
For me everything seems to be running just fine, all my apps works, all hardware works and, as far as I can see in 0.5 days use the phone runs it all about as good as it did on 7.0 after the initial lag that is
Click to expand...
Click to collapse
Glad it worked for you :good:
The fingerprint scanner was a bit of a hit and miss for me when I first updated but it wasn't bad enough to mention, and it has settled now! Other than that, still running smoothly