Hi I have recently installed TWRP onto my s7 but when I go to flash a zip, I go to the install option and it says internal memory =0mb and I can't see any of my files. Therefore I cannot flash any zips such as xposed etc.
(Note - I did get my phone in a boot loop before, if that changes anything)
Is there a way in which I could reset the recovery to show all my current files?
Any help would be gratefully appreciated.
Thank you ??
Hi !
Unfortunately you must format data in order to wipe encryption and this will wipe your device , you should have make a backup of your data before , then your internal storage will show up
Twrp recovery for your device here https://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
Good luck !
xanthrax said:
Hi !
Unfortunately you must format data in order to wipe encryption and this will wipe your device , you should have make a backup of your data before , then your internal storage will show up
Twrp recovery for your device here https://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
Good luck !
Click to expand...
Click to collapse
Thank you but,
How do I do this exactly?
Coombsy said:
Thank you but,
How do I do this exactly?
Click to expand...
Click to collapse
From twrp chose advanced and then format data
Sent from my Darkside of Oneplus 3T
Related
Hello to everyone. I have a great problem with my Nexus S. Today I have done a factory reset, format sd and format system from clockworkmod recovery to install another rom (Jellybam rom). I've do this but now the phone doesn't boot. I see the first image with the lock in the bottom of the screen then only a black screen. I can go to the recovery yet. Is there a possibility to restore my phone?? Thanks for answering.
Simo7 said:
Hello to everyone. I have a great problem with my Nexus S. Today I have done a factory reset, format sd and format system from clockworkmod recovery to install another rom (Jellybam rom). I've do this but now the phone doesn't boot. I see the first image with the lock in the bottom of the screen then only a black screen. I can go to the recovery yet. Is there a possibility to restore my phone?? Thanks for answering.
Click to expand...
Click to collapse
Yes of course. You have formatted your SD, which shouldn't have been done.
In CWM, mounts & storage > mount USB storage and transfer to ROM and Gapps files.
Flash them and you will boot just fine. In future make sure not to wipe/format SD.
Sent from my Nexus S using Tapatalk 2
DJBhardwaj said:
Yes of course. You have formatted your SD, which shouldn't have been done.
In CWM, mounts & storage > mount USB storage and transfer to ROM and Gapps files.
Flash them and you will boot just fine. In future make sure not to wipe/format SD.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Thank you now I can use my phone again. I have installed cyanogenmod 10.1 instead of Jellybam that doesn't work. I hope I will have no problem with this one like in the past.
Hey people!
I need your help!!!!
After i installed ubuntu touch on my note 10.1 (n8000) (http://forum.xda-developers.com/showthread.php?t=2168999&highlight=install+rom)
I would like to go to android back.
i have try 4 android roms, but always the rom is still loading after installion and dont open.
i have try factory reset and wipe and dalvik wipe.
I am frustrated, i need your help.
Maybe the ubuntu device image, changed anything?
Thank you very much
Via recovery mounts and storage .
Format sdcard system data cache .
Boot to download mode flash stock rom .
JJEgan said:
Via recovery mounts and storage .
Format sdcard system data cache .
Boot to download mode flash stock rom .
Click to expand...
Click to collapse
thank you for your reply but
i am not understand
first format sdcard then flash stock rom in download mode? but how ?
abanobboles said:
thank you for your reply but
i am not understand
first format sdcard then flash stock rom in download mode? but how ?
Click to expand...
Click to collapse
Faqs and Guides
Hi all as per title . I think this happen because i accidentally wipe date from the recovery .
so now i have the storage showing 0mb , i cant mount the "data" back in the storage .
help please !! i tried to flash the custom rom using micro SD card but everytime after it is done , it just stuck on bootloop ..
do i just have a bricked tab here ?
please help ... i can provide any further information if needed
jie88 said:
Hi all as per title . I think this happen because i accidentally wipe date from the recovery .
so now i have the storage showing 0mb , i cant mount the "data" back in the storage .
help please !! i tried to flash the custom rom using micro SD card but everytime after it is done , it just stuck on bootloop ..
do i just have a bricked tab here ?
please help ... i can provide any further information if needed
Click to expand...
Click to collapse
I think that twrp can not read the data partition so it showed 0mb. You may have a wrong formatted or corrupted data, just guessing.... You may want to format your data in twrp to see if it works but you will loose everything on the data partition, good luck..:fingers-crossed:
LetMeKnow said:
I think that twrp can not read the data partition so it showed 0mb. You may have a wrong formatted or corrupted data, just guessing.... You may want to format your data in twrp to see if it works but you will loose everything on the data partition, good luck..:fingers-crossed:
Click to expand...
Click to collapse
Hi bro.. thx 4 the suggestion i tried exactly what u said but this comes up .. i tin it s because i wiped data from the stock recovery after i installed twrp which is not recommended , i read that somewhere else but it was already too late..... Pleaseee i need all the help i can get.. the warranty has already over and i ve unlock it anyway so...
jie88 said:
Hi bro.. thx 4 the suggestion i tried exactly what u said but this comes up ..
Click to expand...
Click to collapse
Looks good so far. Now wait 1-2 hours for it to finish, because what it doesn't say is that make_ext4fs doesn't only make a filesystem, it also does a secure erase for all unused blocks, and that takes a lot of time.
jie88 said:
i wiped data from the stock recovery after i installed twrp which is not recommended .
Click to expand...
Click to collapse
What you are saying makes no sense. You can't have the stock recovery and TWRP installed at the same time. Maybe you are confusing the bootloader menu with the stock recovery, but that's something completely different.
jie88 said:
Hi bro.. thx 4 the suggestion i tried exactly what u said but this comes up .. i tin it s because i wiped data from the stock recovery after i installed twrp which is not recommended , i read that somewhere else but it was already too late..... Pleaseee i need all the help i can get.. the warranty has already over and i ve unlock it anyway so...
Click to expand...
Click to collapse
Hi,
What is your bootloader version and twrp version?
Did you try to format your data partition in twrp yet? If you have not done that, then, boot into your twrp, under "Wipe", select "Format" and type "yes" to confirm formatting. It may take very long time to finish the format process. So you need to plug your AC in and leave it alone until IT IS COMPLETED FORMATTING...Good luck and it should work.....:fingers-crossed:
Hi guys ... Its 4am here at my side and i have my tsblet up and running again..fiuuu.. i was about to send in for asus servicing which most prolly they gona chg d mobo..
Thank you both of u soooooo much !
change file system using advance wipe
jie88 said:
Hi all as per title . I think this happen because i accidentally wipe date from the recovery .
so now i have the storage showing 0mb , i cant mount the "data" back in the storage .
help please !! i tried to flash the custom rom using micro SD card but everytime after it is done , it just stuck on bootloop ..
do i just have a bricked tab here ?
please help ... i can provide any further information if needed
Click to expand...
Click to collapse
Try this. boot to twrp, go to andvance wipe, mark data and change the file system to fat. after that format to ext4. after that flash the official firmware.
I thought i had backed up my oneplus so i decided to wipe the data cache dalvik cache and system , but now the rom i wanted was still on my computer is they any way i can still flash that to the phone or is it now impossable - i have twrp installed
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
ahuby09 said:
I thought i had backed up my oneplus so i decided to wipe the data cache dalvik cache and system , but now the rom i wanted was still on my computer is they any way i can still flash that to the phone or is it now impossable - i have twrp installed
Click to expand...
Click to collapse
Just connect your phone to your PC while you're booted into TWRP and you can copy a backup or ROM zip across to your phone. Just make sure MTP is enabled in TWRP, you'll find the option in the Mount menu.
Transmitted via Bacon
Hi there, so i just made a backup of RealmeUI, wiped cache/data/system & flashed Lineage 16. Not only it didn't want to boot system after reboot but now when i get into TWRP, i'm not prompted for my pattern, i land directly on main page and data is all encrypted : Not sure what went wrong here..!! Need to get how to get around this, help me please thanks :good:
seems like \data has to be encrypted if you use a pattern/pin etc. annoying
GoJo ^^ said:
Hi there, so i just made a backup of RealmeUI, wiped cache/data/system & flashed Lineage 16. Not only it didn't want to boot system after reboot but now when i get into TWRP, i'm not prompted for my pattern, i land directly on main page and data is all encrypted : Not sure what went wrong here..!! Need to get how to get around this, help me please thanks :good:
Click to expand...
Click to collapse
Same problem after flash PE, and got softbrick. My solution was format data and reinstall rom...