I tried to convert my Moto G to MototoolAIO, so I downloaded it along with the GPe Rom, and then I clicked the Convert to GPe button.
On the fastboot screen, it showed some errors: hab check failed for recovery, hab check failed for boot and Invalid PIV signed system image.
Frightened, I tried to revert it back to the stock rom, luckily I was able to (4.3 JB).
But, the problem I was facing is there was no longer the "Bootloader Unlocked" Warning screen anymore, I thought I flashed the fixed logo.bin, but it wasn't, it's the stock one...but it's not a big deal...While going through the setup wizard, I realized that Wifi cannot be turned on anymore, since the screen showed: Turn on Wi-Fi to see availble networks. Normally it would turn on by itself, but now it didn't...I realized that there was something wrong about it...
Then, I open the Settings and try to turn the Wifi on, but it won't...it will just switch back to the "OFF" position while it should be at the "ON" position and changed to blue, not grey...
I thought there was some error when converting to GPe, so I decided to flash the whole GPe Rom again...using fastboot method...
Finally, I saw the unlocked lock on the bootlogo, and the phone did boot, but it's just the same, the Wi-Fi now is stuck at the "ON" position, while not turning blue, it just stay greyed...
Then, I dial *#*#4636#*#* to see how the wifi is, and there are some lines:
Wi-Fi state: DISABLED
...
Supplicant state: UNINITIALIZED
I also tried flashing both the GPe stock rom and both the JB and KK motorola stock Rom, still, with no hope of getting the Wi-Fi to work..
Idk what to do now, please help
@Zerelth ... Sorry to be conventional but have you tried a system/factory reset?
Zerelth said:
I tried to convert my Moto G to MototoolAIO, so I downloaded it along with the GPe Rom, and then I clicked the Convert to GPe button.
On the fastboot screen, it showed some errors: hab check failed for recovery, hab check failed for boot and Invalid PIV signed system image.
Frightened, I tried to revert it back to the stock rom, luckily I was able to (4.3 JB).
But, the problem I was facing is there was no longer the "Bootloader Unlocked" Warning screen anymore, I thought I flashed the fixed logo.bin, but it wasn't, it's the stock one...but it's not a big deal...While going through the setup wizard, I realized that Wifi cannot be turned on anymore, since the screen showed: Turn on Wi-Fi to see availble networks. Normally it would turn on by itself, but now it didn't...I realized that there was something wrong about it...
Then, I open the Settings and try to turn the Wifi on, but it won't...it will just switch back to the "OFF" position while it should be at the "ON" position and changed to blue, not grey...
I thought there was some error when converting to GPe, so I decided to flash the whole GPe Rom again...using fastboot method...
Finally, I saw the unlocked lock on the bootlogo, and the phone did boot, but it's just the same, the Wi-Fi now is stuck at the "ON" position, while not turning blue, it just stay greyed...
Then, I dial *#*#4636#*#* to see how the wifi is, and there are some lines:
Wi-Fi state: DISABLED
...
Supplicant state: UNINITIALIZED
I also tried flashing both the GPe stock rom and both the JB and KK motorola stock Rom, still, with no hope of getting the Wi-Fi to work..
Idk what to do now, please help
Click to expand...
Click to collapse
Your Wifi might be messed up, got the same exact problem on my old htc sensation, EXACT!
metpolds said:
@Zerelth ... Sorry to be conventional but have you tried a system/factory reset?
Click to expand...
Click to collapse
It's obviously has been reset...I've done it like 5-10 times now...
This happenned to me as well, but I wasn't using Mototool...
Then problem was the recovery. Try to flash GPE with a different recovery.
Please help...
Hi all,
I downloaded 5.0.1 factory image and flashed all the files (except for user data and cache) through fastboot and everything went smoothly....once the phone reboots, it asks for language etc - then connects to my wifi and gets stuck on "Software update" screen - it shows "checking for updates" and nothing happens. I tried rebooting and turning off the wifi connectivity and it still does the same thing over cell network. There's a skip at the bottom but it's deactivated so I can't click on the skip. Not sure why it got stuck on this screen....anyone seen this happen?
Any help would be greatly appreciated
thanks
I left it overnight but, still its stuck ont he same screen. I made sure I did flash Hammerhead
I made lrx22c - so it's not the issue of flashing wrong files
any help please?
Interesting thing is I tried to flash back to 5.0 and I still get the same error message.
I know it still has all my data as it automatically connects to my wifi.
Not sure what am I doing wrong?
greenzellybean said:
I left it overnight but, still its stuck ont he same screen. I made sure I did flash Hammerhead
I made lrx22c - so it's not the issue of flashing wrong files
any help please?
Interesting thing is I tried to flash back to 5.0 and I still get the same error message.
I know it still has all my data as it automatically connects to my wifi.
Not sure what am I doing wrong?
Click to expand...
Click to collapse
Were you on 4.4.4 before? If so you're going to have to flash userdata.
Sent from my Nexus 5 using XDA Free mobile app
So today I woke up and my phone was stuck at the Google logo and would not boot up after having no problems ever. I tried to factory reset the phone using the hammerhead build on Google's website, but it gets stuck at "erasing 'cache'" and my phone hangs at the bootloader when it gets to this point.
I've also tried installing CWM and wiping from there - cache erases fine but erasing data gets errors such as "Error mounting /data."
I don't really know where to go from here so any help?
Figured it out
Ok, never mind, I figured it out. I flashed a Kit-Kat bootloader to solve the freezing problem and manually flashed all the factory files line by line. Booting up well now.
Dear Users,
I am new at XDA. I am using Moto G 1032 model in Pakistan. After updating Lollipop 5.0.2, it worked fine but recently it started giving problems like "launcher has stopped", "app name" has failed to load, "setting has stopped".
The USB Debugging is not enabled and i tried a lot of methods so that it starts working but with no success.
I have unlocked the bootloader and after i reboot, i get a blank screen almost every time. Some times i get to the main screen which is unlocked with PIN code that I used. When i enter the PIN, all the same messages like "launcher has stopped", "app name" has failed to load, "setting has stopped" starts pouring in and I can't do anything.
I tried going into the recovery mode but when i get there (with Andi lying down with red triangle), i tried the procedure for getting recovery so that i do a hard reset but that too unsuccessful.
Kindly help me.
is there no one who can help me?
Hi! This week my Moto G XT1045 has been rebooting itself every time I press the lock button (but this doesn't happen if i connect the phone to charge. I got this phone 3 months ago and the problem started this week. My phone Is on Official Lollipop 5.1, Bootloader unlocked, and TWRP 3.0.2-2 Installed.
I have tried data/factory reset, re-flash the stock firmware with ADB tools, and changing the ROM, but nothing.
(Also, when it reboots, I got the "No Signal" Issue, at the same time that the phone says "Error while searching for networks"
I have tried re-flashing the baseband too. And wiping cache, but NOTHING happens.
Remember: I have the bootloader unlocked, and I have NO WARRANTY from motorola. What can I do? Please help me