NEED OTA Update zip to flash SM-G350 !!!! - Samsung Galaxy Core

Please my friends a really need you,
After a bad trick (Root + use Device Spoofer),
my Galaxy core plus won't boot: black screen after Samsung Logo! so i tried reset via stock recovery Nô Success !!
beside my phone isn't detected by PC only charge (tried more than 5 câbles, 4 Laptops, 1 Desktop and every USB ports ) so i can't use Odin (can boot on doWnload mode) .
Actually i need an official OTA update zip to flash via stock recovery cause Is the only solution that fan save my phone.
If you have one, or a link to download PLEASE, Save Me
Regards

Related

Problem with GT-I900 upgrade

Hi I was trying to upgrade the Android Version on a Galaxy S2.
I installed Clockwork Mod Recovery and was able to boot into it but couldn't access the SD for installing image.
I booted into the downloading screen ( vol down and power on boot ) and installed an image then bootloader via Odin.
Now when I boot there is the standard Samasung Galaxy S2 logo and I can't access the downloading screen or clockwork mod and it just goes to the animated S logo with usb not recognized appearing on the connected Windows box.
Is there anyway to restore from this point?
Are you able to access the phone through ADB?
If yes, run: adb reboot download, and this should put you in downlaod mode so you can odin a new firmware.
If no adb access, Does odin recognize the phone?
If yes, you should be able to odin a new firmware.
Make sure when you flash the new firmware you are using the correct rom for your device. ie: from your post you have a GS2 I9000 which is not the same as the GS2 SGH-T989.
you would use roms from this forum: http://forum.xda-developers.com/forumdisplay.php?f=665
If you are unable to flash a rom you can always purchase a download mode jig to get you into download mode if you have not Hard Bricked the phone. If you have Hard Bricked your phone there are a couple of sites that do Jtag repair to unbrick your phone.
Good Luck
No reponse from Odin or ADB
I have purchased a download mode jig hopefully it will work.
Thanks for your advice

[Q] canvas 2 bricked usb debugging is not enabled cant boot into recovery

hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS
Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.

have access to download mode only without ability to use usb

After falshing Cosmic ROM for my galaxy core duos via CWM recovery I stucked in boot loop.. I tried everything I have red on forums with no benefit ..tried to reinstall CMV or TWRP via odin 3.07 but it didn't recognize my phone . .actuallly in the past, my laptop wasn't recognizeing my phone no matter what i did ( installing drivers or Kies ,changing cables ,even changing micro usb port on my device)
After a lot of searching in Xda forums somebody gave a zip file to flash in CWM recovery mode to repair connection to odin (CWM_De_Loaper.zip) .by doing this I lost ability to inter recovery mode .I can only inter downlaoding mode without ability to connect to odin...
Can somebody help my or I just have to satisfy with my very old stupid Nokia and live in stone ages:crying::crying:
please help
Download drivers for ur device in pc...after that odin will recognise ur device .....then simply flash it with stock firmware. ....
And and and don't forget to hit that thumbs up

Help bricked galaxy j1 ace j110F :(

Hi my friend j1 ace j110f has bricked when it power on the device..the device on in odin mode and stuck at odin mode i show:
Odin Mode (Multi Core Download)
Product Name :SM-J110F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Custom
Secure download: Enabled
I try to flach all stock rom/with pit file.nothing happned odin stuck at (sboot.bin) i try out the battrey and press volume up and power bouton and home bouton.cant get out from download mode ?any help please?
Help me please
i have the same problem in SM-J100F ace , so i need a way to solve ..
help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
liiboojo114 said:
i have the same problem in SM-J100F ace , so i need a way to solve ..
help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Flash custom recovery for your android in download mode and flash custom roms available for your android.
https://twrp.me/devices/samsunggalaxyj1ace.html
Sent from my Lenovo K50a40 using XDA-Developers mobile app
help again
i didn't use this trick of TWRP becz i didn't understand how to use , but i installed my PC an odin3 v3.11 and downloaded the .tar.md5 file browsing this file at the AP button , then connected my sm-j110f via usb cable to my PC then started nothing happened still is the same .
only displays like this :
Odin Mode (Multi Core Download)
Product Name :SM-J110F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Custom
Secure download: Enabled
help me.
liiboojo114 said:
i didn't use this trick of TWRP becz i didn't understand how to use , but i installed my PC an odin3 v3.11 and downloaded the .tar.md5 file browsing this file at the AP button , then connected my sm-j110f via usb cable to my PC then started nothing happened still is the same .
only displays like this :
Odin Mode (Multi Core Download)
Product Name :SM-J110F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Custom
Secure download: Enabled
help me.
Click to expand...
Click to collapse
bro if you get solution plz tell me :crying::crying::crying::crying::crying:
liiboojo114 said:
i didn't use this trick of TWRP becz i didn't understand how to use , but i installed my PC an odin3 v3.11 and downloaded the .tar.md5 file browsing this file at the AP button , then connected my sm-j110f via usb cable to my PC then started nothing happened still is the same .
only displays like this :
Odin Mode (Multi Core Download)
Product Name :SM-J110F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Custom
Secure download: Enabled
help me.
Click to expand...
Click to collapse
Same problem, stuck on this download mode... Any help please....
Stuck in Odin Mode
Good day,
I've got the same problem, are there no solutions yet.
Black screen with the following info:
ODIN MODE(MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-J110F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Secure Download: Enabled
I cannot enter Download or Recovery Mode (I've got the key combo right as I can do it on my other Android devices)
I've tried flashing a stock ROM with Odin as it is - the device gets detected by Odin, I start the flashing process and then it fails with a message about the PIT not found. But as I say, this is probably because the phone isn't properly in Download Mode.
Any ideas how I can get it in Download Mode, or is it bricked?
The phone hasn't been physically damaged at all and I have never tampered with the software before. No software updates were done immediately prior to the crash.
Any help would be much appreciated.
Duncan
Found a PIT file
if you go to mediafire dot com slash file slash 9wjd0e6e5cwdfpe slash SM-J100F_J1LTE.pit.7z
[slash is the same as /]
In the process of downloading stock firmware now (from SAMMOBILE), but it should need only the stock firmware and this PIT file.
I had the same problem so I did the procedure to unlock but now I have a black screen and can't get anything. Any solutions
Samsung J1 Ace SM-J110F
Hi guys, i have the same problem with my J1 Ace, i saw this thread, downloaded the .pit file
placed it on Odin, together with the .tar.MD5 file, its still failing.
Now i don't know whether i should be having all 4 files or there's a different problem in all of this
Bare in mind i'm using new version of Odin3 v3.14.
And another thing, my phone keeps on rebooting itself soon as i press "START" on Odin.
Please help, did you manage to dowwnload the firmware from sammobile?
Please share as i tried but they wanted PayPal as a payment method.
Thanks
eunoia said:
if you go to mediafire dot com slash file slash 9wjd0e6e5cwdfpe slash SM-J100F_J1LTE.pit.7z
[slash is the same as /]
In the process of downloading stock firmware now (from SAMMOBILE), but it should need only the stock firmware and this PIT file.
Click to expand...
Click to collapse

MY Phone can't open recovery mod

I try any think I download original rom (sammobile) and it doesn't work I try To add TWRP recovery and doesn't work can you help me. if you want photo just ask me for it .
note: I can't download ROM from (xda) because I can't open hard drive of my phone
Phone does not have a Hard Drive are you sure you have a Note 10.1 ??
Does phone boot to download mode ??
Start flash correct stock rom for your model via Odin .
Post Odin error/ fail .

Categories

Resources