[Completed] Firetv Board DV83YW - XDA Assist

Hello Team,
i want to root my new firetv, using emmc connecting method. i ordered the maximus low-volt adaptor and the transcent sd adapter.
i soldered the low-volt adapter ( really...really. small parts ! a very hard job....blue led is working )
then i opened the firetv and i am was wondering about the pcb layout .. it is completely different like on the pics in the net
.does anybody have the solder points for this ( Firetv Board DV83YW )
i am too new here for posting pictures links , sorry .. but per mail no prob.
greets
mike

mike1001 said:
Hello Team,
i want to root my new firetv, using emmc connecting method. i ordered the maximus low-volt adaptor and the transcent sd adapter.
i soldered the low-volt adapter ( really...really. small parts ! a very hard job....blue led is working )
then i opened the firetv and i am was wondering about the pcb layout .. it is completely different like on the pics in the net
.does anybody have the solder points for this ( Firetv Board DV83YW )
i am too new here for posting pictures links , sorry .. but per mail no prob.
greets
mike
Click to expand...
Click to collapse
Greetings and welcome to assist. It looks like you have found the correct place to ask your question here
https://forum.xda-developers.com/showthread.php?t=3551710
so I'll close this one up
Good Luck
Sawdoctor

Related

[Q] mini usb with audio/video

Is there a standard for putting audio out of the mini usb?
Is it something written in stone or do each manufacturer just do there own thing?
I have not tried to find out how mine is wired yet as i dont have a connector with enough pins to make a breakout board and see whats going on, but my viewpad7 has such a connector with extra pins, i think it was the htc wildfire which did, and my canon sx30 camera has one too...
Please use the Q&A Forum for questions Thanks
Moving to Q&A

[Q] question about xtc clip pleas

i brought xtc clip wright now
i have a question to you
there is a lot of sim cable with tool are you know how i can use it ?
is there a specific cable for every device ???
or it,s for all device
thank you a lot
inzaghi--9 said:
i brought xtc clip wright now
i have a question to you
there is a lot of sim cable with tool are you know how i can use it ?
is there a specific cable for every device ???
or it,s for all device
thank you a lot
Click to expand...
Click to collapse
The Clip comes with two flexible SIM card cables. They are used depending on the orientation of your SIM card slot. Think of it as a 'left-hand' and 'right-hand' cable, just use whichever one fits properly. There is also a small 9V-miniUSB cable, which you can use to power the device away from a computer. Be very gentle when inserting your flex cables ino the connector on the Clip, they are quite delicate and it doesn't take much to break a link.
You may have also received the big Windows Phone USB cable with USB ports and stuff hanging off it. I haven't used this and TBH it scared me looking at it so I didn't touch it!
Post here if you need more help!
thank you very very much for you help
if i need any help i will ask you again

HTC Sensation micro USB battery port brocken

Hi guys.
Earlier this morning. My HTC is not charging. I've check the micro-usb port and it appears that there is a problem in the port because there is a brocken pin. I've tried to re-align it and out of luck, the pin broke. I am wondering if it is difficult to replace the micro USB battery port of the HTC sensation. I saw a post on incredible S section and it's easy to replace it as the USB port is just connected on the board via ribbon. Have anyone have encountered the same issue. Worse case scenario is I will need to have the usb port be remove on the phone and replace by a new one, but I am not good on soldering stuff and I might mess the phone big time. I hope someone can reply thanks.
cmangalos said:
Hi guys.
Earlier this morning. My HTC is not charging. I've check the micro-usb port and it appears that there is a problem in the port because there is a brocken pin. I've tried to re-align it and out of luck, the pin broke. I am wondering if it is difficult to replace the micro USB battery port of the HTC sensation. I saw a post on incredible S section and it's easy to replace it as the USB port is just connected on the board via ribbon. Have anyone have encountered the same issue. Worse case scenario is I will need to have the usb port be remove on the phone and replace by a new one, but I am not good on soldering stuff and I might mess the phone big time. I hope someone can reply thanks.
Click to expand...
Click to collapse
At ifixit you can see a picture, that shows, that the port is soldered to the board.
I think it will be hard to solder a new one to it, since the pins are very tiny. Maybe you can find a replacement board on ebay?

[Q] OTG + Charging + Audio

Hi Everyone!
So i've being looking for a diagram or something that might be as helpful for Galaxy Tab 2 7.0 P3100.
Would be great to use one cable for charging otg and sound
i've seen some threads for 10.1 and p1000 :
http://forum.xda-developers.com/showthread.php?t=1155065
i've seen some for tab 7 with similar info
pinout info is generally the same for all the tabs.
so the question is : who can help me, and i guess a lot of other people with this ))
Make this world a better place by helping me to integrate this tablet into my car
Cheers
G.
How did you get on with this. I have a similar project
Sent from my HTC One X using Tapatalk
well, i've done it without the audio(have not tried it yet) i'm trying to find a breakout board somewhere in europe and try it again.
I've used the thread called make your own cables. just search for it here o the forum.
one thing i want to add is that for whatever reason the flash drive would not remount with the setup that i had if you reboot the tablet while flash drive is plugged in and on some other occasions as well.
once ill find the board ill try it again and with audio (u need the board cos the standard sync cable does not have all the pins in it (( )
atm i simply charge normally and use SD card extender cable and SD card for storage
Cheerio
nocountryman

[Q] OTG Cable

Hi all,
I've searched on the forum if our device supports otg but it's not clear, and posts are a bit old.
so..
is otg functioning? i've found this on amazon, specific to our device!
(sorry i can't post links)
amazon dot com:
Micro-USB-Data-Transfer-connecting-compatible-Accessory / dp/ 1059960532
my intention is to transform my sl in a low power server, but i need to plug an hd in order to have more space ( it's not a good pratice to have a lot of read and write on a sd, so buying a large microsd is not an option)
thanks in advance!

Categories

Resources