Related
This method successfully installs the CWM on the phone. CWM version supplied by ZOPO does not work. Use the CWM posted in the second link
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download Fully working English CWM from here http://www.4shared.com/file/16vuWyiU/recovery.html. The one posted in Zopo website does not work.
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Additional Info -
Install PDAnet from here http://www.junefabrics.com/android/download.php or Snappea from www.snappea.com to make your device get recognized when connected to the computer. Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
reserved
The CWM from taiwan101 for the 9300+ seems to be working fine. I was able to install .zip file from SD card. However the CWM is in Taiwanese, so if anyone can provide the CWM in English, thanks in advance
link for 9300+ CWM http://d01.megashares.com/dl/KicT315...M_Recovery.rar
UPDATE - Finally got a full working English CWM for ZOPO extracted from Mod ROM posted thanks to Kyrie1965. Tested and everything is working. Download from here http://www.4shared.com/file/16vuWyiU/recovery.html
vijayar said:
This method successfully installs the CWM on the phone. CWM as such works (able to navigate through the menus etc) but some of the function such as Install from ZIP, Backup etc, mount are not working, Gives an error Unable to Mount Sdcard !. Not sure if the issue is with CWM version supplied by ZOPO, need to try with other/older versions of CWM.
Please feel free to post links of CWM that works
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download latest CWM from the link provided in Zopo Website http://www.4shared.com/file/lp0t5E1t/cmw-recovery.html
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Click to expand...
Click to collapse
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
B rom error:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
help
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
miraguilar1 said:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Click to expand...
Click to collapse
Check your device drivers USB driver has not been installed properly. I faced this issue and after multiple attempts of reinstall of USB drivers the flash tool started working properly
Also you can try installing PDAnet from here http://www.junefabrics.com/android/download.php
Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
Note Connect the phone to flash tool first without battery, in options select with battery, press download after selecting the required file, when it says searching unplug the phone put battery back, dont switch on, plus back the usb. The flash tool should load the required file.
senlakshman said:
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
Click to expand...
Click to collapse
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
From where did you bought this mobile?
Does the imei start from 355,889,3535
Is it ips 1gb ram .
Sent from my GT-I9100 using xda premium
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
vijayar said:
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
Click to expand...
Click to collapse
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
plz also have a look at previous posts u will get your answer.
senlakshman said:
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
Click to expand...
Click to collapse
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Working
bhargav1991 said:
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
Click to expand...
Click to collapse
Confirmed working on 9300+
Follow the tutorial exactly as written.
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
Israeleet said:
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Click to expand...
Click to collapse
This is a copy of cwm with the specific support for the MTK6577 used by the 9300+
So yes it safe.
---------- Post added at 10:46 PM ---------- Previous post was at 10:38 PM ----------
bhargav1991 said:
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
Click to expand...
Click to collapse
Make sure you removed the battery long enough from your phone.
You may also have to reboot your pc a couple of times.
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
vattmann said:
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Click to expand...
Click to collapse
Yessss , it did worked by using the MTK6575 driver :good:
bhargav1991 said:
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
YTF
This is the CWM forum.
Has anyone tried tw5 launcher on this ?
Sent from my GT-I9100 using xda premium
bhargav1991 said:
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello bhargav1991, i got some questions:
1. I've buy zp900 but it will arrive next week. In the video you posted there is a guide how to flash the official Zopo z900 latest stock ROM but in this way you get the latest rom + root but no ClockWorkMod Recovery installed ?¿¿
2. My intention as i done with my old..HTC Desire HD is flashing ClockWorkMod Recovery and install the latest Zp 900 stock ROM + ROOT. So following the 1st post and once all steps are done one by one, will I get the same rom that come installed ?¿ but non root ?¿
I need to download the latest ZOPO ROM .zip and then install it from ClockWorkMod and finally i will get the latest ROM + ROOT ¿?
Could you please help me
Thank you so much in advance guys ¡¡
:good:
Heya,
Since there is not enough info on the web regarding the rooting procedure for Videocon A55 HD and custom recovery for this awesomely smooth device, I'm uploading the necessary files and step by step guide. Hope it helps all the users of this device.
Remember rooting would tamper the warranty of the device and should be exercised carefully. The procedures mentioned below have been personally tested by me however I take no responsibility in case you ruin your device although I would be here to help you in such a scenario. Besides this the rooting script was not created by me and all the credit goes to the respective developer.
1. Rooting Procedure
Make sure you have enabled "USB Debugging" under Developer Options on your phone.
Keep your phone disconnected from computer via USB
a) Download and Install the ADB Interface driver for MTK 6589
Link to ADB Drivers
b) Download and extract the rooting package
Link to the Rooting Package
c) Now go to the extracted package and open a command prompt to that location as Administrator.
d) Type run.bat in Command Prompt and a message must appear "Press enter to root your phone..."
e) Press any key
f) Now after a few seconds the message should be " * daemon started successfully *"
g) Now connect your phone via USB to the computer
h) The cmd would automatically start pushing the necessary files onto your phone and when the process completes your phone will restart
Now you are rooted.To check install any Root checker application from playstore. Remember to grant permission while running Root Checker app when a pop up appears. It is suggested to update the SuperSU app from playstore and execute it at least once after that to update the su binary. You can also update the busybox package from playstore because busybox supplied with the rooting package is pretty old.
2. Installing CWM Recovery
Okie, since you are now rooted, most likely you would require a custom recovery to create full nandroid backups or test different ROMs. The CWM recovery provided here was created using MTKDroid Tools and is version 5.x (Non Touch). Again all credit goes to the developer of MTKDroid Tools for making such a powerful piece of software.
a) Download and extract the recovery package.
Link to CWM 5.x and Original Recovery for A55 HD
b) There are two files in the package , one is the custom CWM recovery and the other one is Stock Recovery (Names are pretty self understood)
c) Copy "Custom_Recovery_CWM_A55HD.img" to the root of your SD card
d) Rename it to "recovery.img"
e) Install Mobile Uncle Tools [MUT] from the playstore.
f) Open MUT and go to recovery update
g) Now you must see the recovery.img in a list. Just select it and follow the pop ups.
h) Now your phone would restart.
i) To check if the recovery update was successful, go to MUT and select "Reboot into Recovery" and your phone would most likely start in CWM recovery..
Alternative to get into recovery mode is to Press Power button + Volume Down key together when switched off.
3. Stock ROM for Videocon A55 HD
Okie, here we go, as I mentioned that I had got hold of the stock rom, so here I'm publishing it. The credit goes to Pratap Solunke (psolunke) for providing the Factory ROM zip.
I have just divided it into update.zip and files for SPFT for ease of downloading. Besides I have splitted each section into 4 parts and reuploaded it so you can download them at your ease. I'm providing the link for the whole folder which includes the changelog, update.zip and files for SPFT.
The ROM version is V7 (2013.07.15) which is different from the original ROM which was V5 (2013.06.08).
You can read the changelog for the updates in this ROM.
Link to ROM Folder
If using update.zip to flash this ROM, then
Step 1. Open the update.zip with winrar, Do not extract.
Step 2. Navigate to \META-INF\com\google\android\updater-script and extract this file only, then use "Notepad++" to open the file.Don't use default notepad.
Step 3. Delete assert(getprop("ro.product.device") == "A55HD" || getprop("ro.build.product") == "A55HD");
Step 4. Save the file, put it back to the same location in archive (It will take some time to add to archive)..Done...then proceed as usual.
a) update.zip is for reinstalling Factory Image of the ROM from recovery mode. The zip file is signed.
b) Files for SPFT are to be used with SP Flash Tool and can be used in case your phone is bricked. Do not flash the preloader unless you know what you are doing.
c) To download the files just go to the respective folder and right click on each file and hit download. After all four parts are downloaded, extract Part 1 of the downloaded splitted files and the files would be ready to be used as is.
d) Keep all four parts of the splitted files in a single folder and do not rename the splitted files.
If you have any questions related to A55 HD you can ask them here and I would try to help you the best way I can.
I'm still testing some custom ROMS but none seem to work . So far I've tested LEWA OS and MIUI ROM for xiacoao G6 Youth. However I'll keep trying and update once I have a working Custom ROM.
One more project in mind is to port Custom ROMS to A55 HD if none is available as is on the web.
If anyone of you is able to find a working Custom ROM for A55 HD kindly post it here so that we can have a repository of successful and useless attempts. I'm sure it would help others.
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also.
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also. All the recoveries shown in the list are only remote recoveries
nanachitang420 said:
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also.
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also. All the recoveries shown in the list are only remote recoveries
Click to expand...
Click to collapse
I forgot to mention , rename the recovery image to "recovery.img" and then put it in root of SD card and it would get detected by MUT...It will get detected instantly...Thankyou for bringing it to notice...Just updating the post...
done but some observations!!!!
DONE.
Some observations:
1. In CWM, cant see internal SD card. While, after mounting usb storage, can see external SD card only. NOTE, CANT SEE INTERNAL SD CARD ONLY WHEN TRY TO MOUNT INTERNAL PHONE STORAGE IN CWM. WHILE NORMAL WORKING NO PROBLEM.
2. Deleted.
3. Deleted.
4. Deleted,
5. Deleted.
6. The font size of Stock and CWM recovery is very small still it can serve the purpose.
Do any body have original/stock update.zip from Company?
Updates:
I think I figured out the problem with touch. Uninstalled an application called "Go Power Master" and the touch is ok even after connecting USB or charger. Thanks man. The phone is working very nice after rooting.
nanachitang420 said:
DONE.
Some observations:
1. In CWM, cant see internal SD card. While, after mounting usb storage, can see external SD card only.
2. After rooting, before even installing CWM, got some irratic behavior with touch. Like, while USB is connected, touch was not working as expected, it took long time to make USB storage active as after touching a specific required operation, like pulling down task bar it was doing something else like opening play store, opening game, or opening date and time settings. While unlocking lock screen, it was just opening any random phone application and is not even allowing to go back with back button or home button. Don't know this is related with what?
3. Irratic application were opening while touching different application but after removing USB, things were working better.
4. Rebooted in CWM and first tried to "fix permissions" to avoid that irratic touch behavior, thinking there was problem with permissions. Took nandroid back up, after fixing permissions. Wiped cache and dalvik cache and restarted.
5. Now, till now phone is not connected to PC with USB cable or connected to charging; it behaves better with touch but it is very troublesome to perform any operation after phone connected to PC with USB or to charger.
May be you have faced these issues or may not! Any suggested solution? Do any body have original/stock update.zip from Videocon?
Updates:
I think I figured out the problem with touch. Uninstalled an application called "Go Power Master" and the touch is ok even after connecting USB or charger. Thanks man.
Click to expand...
Click to collapse
For me the touch works without any problems...and as for detecting internal sd card...that also works flawlessly..i don't have the phone with me right now...Yesterday I was trying something and the nvram got corrupted [No baseband]...so right now it is resting at service center...Hope to get it next week...
One suggestion never install Carliv Touch Recovery on this phone...it messes with the baseband and display...Stick to this recovery until I build a more updated CWM...
Latest V-Store attached
Attached
nanachitang420 said:
Attached
Click to expand...
Click to collapse
Nice...let's make this thread a repository of A55 HD..And I have also got hold of the original update.zip and files for SPFT ...Will split them and upload to my google drive...and then share them..
update.zip
Aaaaanuj1 said:
Nice...let's make this thread a repository of A55 HD..And I have also got hold of the original update.zip and files for SPFT ...Will split them and upload to my google drive...and then share them..
Click to expand...
Click to collapse
The current version of my phone is 08062013. Can I flash this latest version through CWM and upgrade?
Tried to flash update.zip through CWM...
Installing: /sdcard/update.zip
Finding update package...
Opening update package....
Installing update....
assert failed: getprop("ro.product.device")=="A55HD" || getprop("ro.build.product")=="A55HD".
E: Error in /sdcard/update.zip
(Status 7)
Installation aborted...
Restored nandroid backup after this.
nanachitang420 said:
Installing: /sdcard/update.zip
Finding update package...
Opening update package....
Installing update....
assert failed: getprop("ro.product.device")=="A55HD" || getprop("ro.build.product")=="A55HD".
E: Error in /sdcard/update.zip
(Status 7)
Installation aborted...
Restored nandroid backup after this.
Click to expand...
Click to collapse
Okie it is an easy fix...
Step 1.Open the update.zip with winrar, Do not extract.
Step 2.Navigate to \META-INF\com\google\android\updater-script ,use "Notepad++" to open the file.Don't use default notepad.
Step 3.delete assert(getprop("ro.product.device") == "A55HD" ||
getprop("ro.build.product") == "A55HD");
Step 4.Save the file, update to archive..Done
Done
Successful.
Please add in above step 2 "to extract file Updater-script on PC" and then use N.........
Flashed modified update.zip from CWM and phone upgraded to version 15072013. To be strange it is showing v1.0 20130715 in build ie in about phone. All the applications were intact but lost root and also CWM recovery; then managed to root the phone and flash CWM with your fantastic guide.
After booting in CWM, wiped cache and dalvik cache(why? don't know). Phone is working nice. Thanks,
nanachitang420 said:
Successful.
Please add in above step 2 "to extract file Updater-script on PC" and then use N.........
Flashed modified update.zip from CWM and phone upgraded to version 15072013. To be strange it is showing v1.0 20130715 in build ie in about phone. All the applications were intact but lost root and also CWM recovery; then managed to root the phone and flash CWM with your fantastic guide.
After booting in CWM, wiped cache and dalvik cache(why? don't know). Phone is working nice. Thanks,
Click to expand...
Click to collapse
Nice...Yeah, people at Videocon forgot to change the version number i guess...and loss of root and cwm was due to restoring of system.img and recovery.img in the ROM file...so it's normal..
Besides one should always perform a clean install from CWM..i.e. Clear Data, Clear Cache, Clear Dalvik Cache, Format /system/ and then install ROMS..
And yes this ROM is a bit better then the one on phone..I received my phone today from service center and software was updated to this ROM..It felt much better .And the version was same , so this seems to be the latest ROM for A55 HD.. Enjoy
How to flash phone with sp flash tools
was trying to flash a recovery build on CWM site. I think it has spoiled baseband. No sim is getting detected. Any idea how to flash phone with SP tool? Don't have access to service station as am very far.
Edit: Managed to flash with SP tool. Used the files you have uploaded for SPFT. Selected all options and now phone is on and showing base band version, also sim are getting detected. The issue was preloader drivers for windows 8 which managed to install by disabling driver signature verification. Device rooted and installation of CWM through MUT was successful. Thanks.
Try this and this. Its as good as custom rom installation works very well with MTK6589
nanachitang420 said:
was trying to flash a recovery build on CWM site. I think it has spoiled baseband. No sim is getting detected. Any idea how to flash phone with SP tool? Don't have access to service station as am very far.
Edit: Managed to flash with SP tool. Used the files you have uploaded for SPFT. Selected all options and now phone is on and showing base band version, also sim are getting detected. The issue was preloader drivers for windows 8 which managed to install by disabling driver signature verification. Device rooted and installation of CWM through MUT was successful. Thanks.
Try this and this. Its as good as custom rom installation works very well with MTK6589
Click to expand...
Click to collapse
You must understand that the recovery partition is of 6 mb....and most likely the recovery you received from CWM online builder was more than 6 mb..hence your secro.img was also overwritten...hence the problems with baseband and imei....same thing happened with me 7 days back when I had to submit my phone to Service center. Unfortunately i didn't had the flash image then but it is good to know that it can also recover baseband and imei. And congrats for recovering your phone and I'm glad my contribution helps you...
Just remember one thing...if the boot, recovery,secro partitions are of more than 6mb then don't flash them as they would mess one thing or other...and hopefully you had disabled preloader in SPFT.....if not then from next time onwards please do it....because rarely you need to flash preloader...and a wrong flash can make your device a brick which can only be recovered by Test points.Hence never flash preloader until unless you know what you are doing.....And yes, I already use Gravity Box along with Xposed Framework...Great mod...Besides them I also use xhalofloatingwindow with bubble launcher and lwinrecent ...Both are xposed modules and work as expected.I also have init.d support which allows to make boot persistent changes on device....Along with that a few build.prop tweaks that take my ROM to the custom level...Let me know if you need any of this...
Please
Thanks for preloader advise. was not that much aware and will take care next time. Please share init.d support, build.prop tweaks and their usefulness.
For init.d, use term-init by ryuinferno.
http://forum.xda-developers.com/showthread.php?t=1933849
This is the link to the thread. Do not use zip-init or uni-init. Follow the guide on the thread. It works flawlessly.
Sent from my A55HD using Tapatalk
Which other phones has MTK6589 and same config ?
Tell me model number and brand, i will try to upload stock firmware.
it will help us built custom rom with custom features.
@anuj - Anyways if it brick again and need to send service center, please text me imei and location, i will make it done fast for you dear.:fingers-crossed:
Thank you Pratap bro. I'll let you know next time if I get to the point where I need to go to service center but I'm sure that with the ROM you provided I wouldn't need to go to one. And yes people you can ask for stock ROM from Pratap. He has excellent connections and can get you at least the Videocon ROM and may be others . Don't forget to thank him. Besides he is an excellent person who wouldn't shy away from helping you if he can. Ciao Pratap brother.
Sent from my A55HD using Tapatalk
Any new updates from Videocon for our A55HD?
File not found
File not found bro
Totally new guide! Simple step by step toutorial
It took us a while to get root on our devices. Hopefully we did it! Now we can enjoy benefits of having rooted device (like Xposed Modules etc). We have working TWRP recovery which allows us to backup your phone, flash SuperSU binaries, mods and custom ROMs (actually we are working on it). First: read whole post, then download necessary files and read it again. This guide will allow you to root your BLU Pure XL/Allview X2 Soul Xtreme/Gionee Elife E8/Condor Allure A100 and other clones I don't know.
If you don't know what is 'root' & TWRP nor understand the whole idea of rooting your phone this post (or even most of the XDA community) is not for you! Read everything carefully.
POSTING BUG REPORT/PROBLEM/ISSUE!
jaiwalla said:
HELP!!!
Where am I going wrong?!?!
Click to expand...
Click to collapse
I don't know where are you wrong...!
Maybe you say something else? Maybe give me some logcat?
I would help you if I knew the problem. As for now for me you don't have any problem. Your post is useless in this form.
You have to learn how to tell the error/problem/bug before you post anything on any forum.
If you want me to help you solving this situation send me private message or edit your post and tell the problem in the right form*, please.
Cheers,
bemolx
*Right form looks like:
What's the problem?
Did you check whole thread before posting?
If possible give me logcat/shown error
Make sure you read main post carefully
What you will need to get it working:
ADB and Fastboot drivers
SuperSU flashable zip archive
TWRP Recovery image
PC & your phone
BUT!
Code:
Your warranty is now void.
Everything you're doing with your devices is on your own!
We're not responsible for any damage on your phone!
If you don't understand what's root it's good time to STOP!
Now we're starting!
Look carefully on files you need (I've mentioned them above) and scroll down for download links. Download every file we need.
Note:
At the bottom of this post you'll find two versions of TWRP: 3.1.0-x and 2.8.6.0. Let me explain the difference:
TWRP v3.1.0-x: this version has been compiled from scratch & made by me. It is the newest available recovery version at the moment and without bugs. More info in the thread linked below.
TWRP v2.8.6.0: this version has been ported from Xiaomi Redmi Note 2 & made by @acheron1502. It's not the newest but working one. It has some little bugs. More info in the thread linked below.
I suggest you to download v3.1.0-x because it will get further support by me. But it is your choice now.
Setting up our workstation
I hope you have already downloaded everything we need.
On your Desktop create a new folder (for example "root").
Find package with ADB drivers, open it and extract to the "root" folder.
Now find TWRP image and place it also in our "root" folder. This image should look like this:
Code:
twrp-3.1.0-0-x2xtreme.img
or
Code:
BLU_PURE_XL_TWRP.img
Let's rename it like this (see below) to make our rooting process easier
Code:
twrp.img
Now we're setting up your phone
Open 'Settings' application. Scroll down to 'About phone'. Click about seven times on 'Build number'. You should see: "You are now developer".
Now find 'Developer options', then 'Enable USB Debugging' and simply enable it.
Connect your phone to the PC. On PC: find SuperSU.zip and copy it on your phone.
OMG!!! Flashing!!!
Okay... That's the most important step.
Turn off your phone. Press 'power' & 'vol +' together. This key combo should boot up your phone into stock recovery mode.
Scroll down using 'vol -' to 'Reboot bootloader' and confirm pressing 'power'. This will boot your phone into Fastboot mode.
On PC: open "root" folder. Open Command Prompt here (LShift + right mouse click -> 'open cmd here')
In the Command Prompt type:
Code:
fastboot flash recovery twrp.img
This command will flash TWRP recovery on you phone.
After flashing process is done reboot you phone into TWRP by pressing 'vol +' and 'power'. When you see bootlogo get your finger from the 'power' button. You will see TWRP logo. You can unplug USB cable now.
We're almost here!
Now you should see TWRP main page same like in the screenshots I've attached to this post.
We must flash SuperSU binaries to get rooted phone. To do this press 'Install' button.
You should see list of files/folders on your phone. Navigate to the SU.zip and choose it by clicking on it.
TWRP will ask you for permission to flash that zip package. To allow it to do so swipe to the right slider on the bottom of the screen. Now SuperSU is installing.
After installation process is done press 'Reboot system now' button. Your device will reboot into your system.
Done!!!
And there you go! Your device should be now rooted with TWRP recovery installed. Check if your phone is rooted correctly by installing ROOT Checker. To make rebooting process much easier and faster you can download Quick Reboot.
Xposed Modules
There's an option to install Xposed Modules as I mentioned at the top of this post. Not every module is working but you can try it and let us know what's working.
To get it working you need:
Xposed Installer Alpha App (allows you to download and manage modules)
Xposed SDK zip (the most important thing)
Original thread with those files is linked below.
Note:
It's important what version of SDK you are downloading. Our device has 64-bit ARM MediaTek chipset so it is arm64 and it's running lollipop 5.1 ROM which equals sdk22. By that meaning the SDK zip you should download looks pretty much the same like this:
Code:
xposed-v80-sdk22-arm64.zip
Installing
Place both files on your phone's storage and reboot to recovery. Press 'Install' and navigate to sdk.zip. Choose it, confirm installation - when it's done reboot into system. Now use any file browser and find XposedInstaller.apk and install it.
Now you can download any module you want. Further instructions in post linked below.
How to unroot
Most of you would like to flash stock OTA etc.
To do this you have to have stock recovery installed.
First open SuperSU app, then scroll down and look for 'Clear/unroot' option. Choose it and follow on-screen instructions.
Then download stock recovery image (downloads for Elife E8 and Allure A100 will be available when someone provide me a link). Place it the 'root' folder (or just in the same directory with fastboot drivers etc.). Rename downloaded file into recovery.img.
Method 1 - using Fastboot
Reboot phone into bootloader mode. Open terminal in the 'root' folder and type
Code:
fastboot flash recovery recovery.img
Now reboot into system by pressing power button for a while.
Method 2 - using TWRP
Copy downloaded recovery onto your phone's storage. Reboot phone into recovery mode. Press 'Install', then change from installing zips to installing imgs (bottom right button). Navigate to downloaded recovery file and choose it. Confirm installation. After that reboot into system.
You should be now unrooted and able to flash OTA.
Downloads:
ADB & Fastboot drivers: link
TWRP Recovery: TWRP v3.1.0-0 (recomended) or TWRP v2.8.6.0 (unofficial)
SuperSU binaries by @Chainfire: link
Stock recovery: Pure XL & X2 Xtreme (extract .zip before renaming/installing)
TWRP Materialised - Dark / Light / Play
Xposed Modules
Special thanks go to the awesome team!
@FuMMoD
@acheron1502
@dexterxx
@spit85
Thank you guys. Without you it wouldn't be possible!
ENJOY!
Hey @bemolx ,
Since your thread is more of a HOW TO root, would it be OK if you move this into GENERAL and field all the rooting process questions there?
I will start a new Dev Thread for TWRP and all TWRP related development issues.
You can then use that new thread for all your download links.
EDIT:
Please use this link for TWRP in your guide.
bemolx said:
My friends and me figured out how to get root on our phones. By the way @acheron1502 made TWRP recovery which allows us flash Super SU 2.46 (Stable). Also you can flash Xposed Modules as you want.
HOW TO INSTALL:
Connect phone to your PC
Make sure you have adb and fastboot drivers installed
Download TWRP from this post
Download Super SU
Copy SU.zip to your phone's storage
Reboot phone into fastboot/bootloader mode
Flash recovery using: fastboot flash "downloadedrecoveryfilename"
Reboot to TWRP by pressing and holding Vol+ & power buttons (still in fastboot mode!)
In TWRP flash SU.zip, then reboot
What doesn't work:
- no adb in recovery
- you tell us
And there you go! Your device should be now rooted with TWRP recovery installed. Check if your phone is rooted correctly by installing ROOT Checker.
BUT!
Everything you're doing with your devices is on your own! We're not responsible for any damage on your phone!
Special thanks go to the awesome team!
@FuMMoD
@acheron1502
@dexterxx
@spit85
Thank you guys. Without you it wouldn't be possible!
ENJOY!
Click to expand...
Click to collapse
Do I have to install a particular driver for my Blu Pure XL for adb to recognize the phone is connected? Please provide a link to the driver you used. Also, please provide a link to the adb / fastboot you recommend. Thank you and great work to you all!!
acheron1502 said:
Hey @bemolx ,
Since your thread is more of a HOW TO root, would it be OK if you move this into GENERAL and field all the rooting process questions there?
I will start a new Dev Thread for TWRP and all TWRP related development issues.
You can then use that new thread for all your download links.
Click to expand...
Click to collapse
Okay, no problem
mhajii210 said:
Do I have to install a particular driver for my Blu Pure XL for adb to recognize the phone is connected? Please provide a link to the driver you used. Also, please provide a link to the adb / fastboot you recommend. Thank you and great work to you all!!
Click to expand...
Click to collapse
Just take a look at Google's development page - there are drivers needed to get it working. Nothing else
bemolx said:
Okay, no problem
Click to expand...
Click to collapse
Once it's moved, see of you can get it PINNED to top so everyone can find it easily.
It states unknown partition 'BLU_PURE_XL_TWRP' "error: cannot determine image filename for 'BLU_PURE_XL_TWRP' what can I do? Thanks
fastboot flash recovery filename.img
@bemolx, fix it
error: cannot load 'BLU_PURE_XL_TWRP' please help. Thanks
---------- Post added at 01:12 PM ---------- Previous post was at 01:04 PM ----------
dexterxx said:
fastboot flash recovery filename.img
@bemolx, fix it
Click to expand...
Click to collapse
Got it thanks a mil
bemolx said:
My friends and me figured out how to get root on our phones. By the way @acheron1502 made TWRP recovery which allows us flash Super SU 2.46 (Stable). Also you can flash Xposed Modules as you want.
HOW TO INSTALL:
Connect phone to your PC
Make sure you have adb and fastboot drivers installed
Download TWRP from this post
Download Super SU
Copy SU.zip to your phone's storage
Reboot phone into fastboot/bootloader mode
Flash recovery using: fastboot flash "downloadedrecoveryfilename"
Reboot to TWRP by pressing and holding Vol+ & power buttons (still in fastboot mode!)
In TWRP flash SU.zip, then reboot
What doesn't work:
- no adb in recovery
- you tell us
And there you go! Your device should be now rooted with TWRP recovery installed. Check if your phone is rooted correctly by installing ROOT Checker.
BUT!
Everything you're doing with your devices is on your own! We're not responsible for any damage on your phone!
Special thanks go to the awesome team!
@FuMMoD
@acheron1502
@dexterxx
@spit85
Thank you guys. Without you it wouldn't be possible!
ENJOY!
Click to expand...
Click to collapse
What about the Ono U1? It's an inexpensive phone with high end specs thanks again http://forum-lw-3.xda-cdn.com/images/smilies/wink.gif
Swarai said:
What about the Ono U1? It's an inexpensive phone with high end specs thanks again http://forum-lw-3.xda-cdn.com/images/smilies/wink.gif
Click to expand...
Click to collapse
It *might* work based on specs I saw on u1labs.com ...
Can you post the values in your /proc/partinfo so I can compare with ours?
acheron1502 said:
It *might* work based on specs I saw on u1labs.com ...
Can you post the values in your /proc/partinfo so I can compare with ours?
Click to expand...
Click to collapse
The specs haven't been updated yet, but the phone should be released soon along with the kernel source.
Swarai said:
The specs haven't been updated yet, but the phone should be released soon along with the kernel source.
Click to expand...
Click to collapse
Let's keep the development thread about this phone (Blu Pure XL) and other phones with the exact same base maker/model (ie. Gionee E8, Allview x2 Extreme). If you are asking about gaining root for a different phone and need some Mind-share from this group of people due to the other phone having a similar SOC, the best way is to open a new thread in the Q&A Section or the General Section, but I think you should wait until the phone is released first IMHO.
bemolx said:
7. Flash recovery using: fastboot flash "downloadedrecoveryfilename"
Click to expand...
Click to collapse
This should be fastboot flash recovery BLU_PURE_XL_TWRP.img
Also ... I requested this thread be moved to General and be Pinned for easy finding for anyone that has this phone
Guys,
1) THANKS for GREAT work!
2) Please provide more CLEAR / ACCURATE details on how to do this, because NOOBs (including myself) get very confused.
a) Link to adb / fastboot drives. Saying "they are in Google development section means nothing"
b) How do I "Reboot phone into fastboot/bootloader mode"??
This would help so many people root without bricking the phone.
Thank you once again!
levchikb said:
Guys,
1) THANKS for GREAT work!
2) Please provide more CLEAR / ACCURATE details on how to do this, because NOOBs (including myself) get very confused.
a) Link to adb / fastboot drives. Saying "they are in Google development section means nothing"
b) How do I "Reboot phone into fastboot/bootloader mode"??
This would help so many people root without bricking the phone.
Thank you once again!
Click to expand...
Click to collapse
Thanks for reply! Once I get a little more time I'll re-write this "how to".
Cheers
Everything should be now clear. I've added links for drivers etc. Also i've re-wrote it for better understanding
Sent from Nexus 5
I'm having issues with fastboot. It says it's blocked for security. Is there something required that isn't normally on android phones to get the fastboot method to actually allow me to enter fastboot? At the beginning was just going to recov ery and putting reboot into fastboot.
alaiwy said:
I'm having issues with fastboot. It says it's blocked for security. Is there something required that isn't normally on android phones to get the fastboot method to actually allow me to enter fastboot? At the beginning was just going to recov ery and putting reboot into fastboot.
Click to expand...
Click to collapse
Try to reboot manually to recovery, then you should see option 'reboot bootloader'. After choosing it follow my instructions
any1 have stock rom to reflash full rom , pure xl ?
SPECIAL KNO'DIS: This Guide has been changed to refelct proper installation for both types of Maven Pro tablets, be Sure to follow the appropriate guide.
For the purpose of this guide, I'll assume you already have working ADB and Fastboot on your PC, if not, you'll need to set that up first. This guide doesn't cover installation of ether of those. If you're looking for the guide to the Viking Pro (RCT6303W87DK), go here.
KNO'DIS: I, OR ANYONE ELSE AT XDA, WILL NOT BE HELD RESPONSIBLE FOR "BRICKING" YOUR TABLET!! IF YOU MANAGE TO MAKE A BRICK, DUE TO YOUR "FUN-DA-MENTAL" INABILITY TO READ, GO BUILD A BBQ PIT WITH IT!! (Or ask for help, there's a lot of friendly people around here)
So, without further ado, lets get started. First, you'll need to know which version of firmware your device is running, this can be found in 2 different ways. From a running device go to: Settings/About tablet and look at the Build number. Or you can boot into stock recovery and the firmware version will be at the top left of the screen.
You should see something like the following, and note the 2nd number after the 2nd "V":
Code:
RCT6213W87DK-ANDROID5.0-V37-V1.9.30 <-- This is x.9.x version of firmware
or
RCT6213W87DK-ANDROID5.0-V68-V1.12.30-B <-- This is x.12.x version of firmware
Now that you know which firmware you have, follow the approriate guide below. I've broken this post into 2 different sections, as each tablet is just a little bit different.
About the Bootloader
This applies to both versions of firmware and tablet users. Turns out, the booloader doesn't have to be unlocked in order to install a custom recovery or root the device. So there's really no reason to unlock it, and I have removed that portion of this guide.
Installing MTK Preloader Signed Drivers
Drivers located Here
x.9.x Versions
Steps (Windows 8/8.1/10): For step 2 you will have less than five seconds. Preloader mode is only active for a few seconds. So read first!
1- Extract the drivers to the Desktop and open the Device Manager ("right click" on the Start button, select "Device Manager")
2- Plug your tablet in as such: turn off the tablet. Plug in the micro USB on the tablet, the other to the USB port on the PC, now very quickly in the device manager locate the new device and right click on it. For me, it showed up under "Other devices" and read MT65XX.
3- Select "update driver software" then select "browse my computer for driver software" (make sure "Include subfolders" is selected.
4- Click "Browse..." and navigate to where you extracted the driver zip. You "should" be at the following path: Desktop/MTK Preloader Signed Drivers
5- Click on "OK" then "Next". The driver should install at this point. Once that is done, unplug the usb cable from the pc (I find it easier to just keep the micro in the tablet).
x.12.x Versions (Requires Full size Male-to-Male USB Cable)
Steps (Windows 8/8.1/10): For step 2 you will have less than five seconds. Preloader mode is only active for a few seconds. So read first!
1- Extract the drivers to the Desktop and open the Device Manager ("right click" on the Start button, select "Device Manager")
2- Plug your tablet in as such: turn off the tablet. Plug in the full size USB cable to both the tablet and the PC.
3- Plug the micro USB into the tablet, the other to another USB port on the PC, now very quickly in the device manager locate the new device and right click on it. For me, it showed up under "Other devices" and read MT65XX.
4- Select "update driver software" then select "browse my computer for driver software" (make sure "Include subfolders" is selected.
5- Click "Browse..." and navigate to where you extracted the driver zip. You "should" be at the following path: Desktop/MTK Preloader Signed Drivers
6- Click on "OK" then "Next". The driver should install at this point. Once that is done, unplug both USB cables from the PC (I find it easier to just keep them in the tablet).
Installing TWRP
Firmware/TWRP Downloads
Maven x.9.x (Currently Contains: V37-1.9.30 and TWRP)
Maven x.12.x (Currently Contains: V63-V1.12.0-20150802 and V66-1.12.20-B-20150831 Firmware and TWRP)
Special Thanks to: @ShadowCX11 for testing for me.
Be sure you are using the appropriate TWRP for your version of firmware, and do the following:
1- Extract the firmware and the SP Flash Tool to your desktop.
2- Start the SP Flash Tool, and where it says "scatter file loading" click and navigate to the folder where you have the firmware and load the scatter file (depending on device, it could be in the "Images" folder).
3- Once that is done, uncheck everything, and select "recovery" only, from the list, navigate to the TWRP image file and click "Open", then click on the download button.
4- Plug the USB cable(s)* back into your PC. At this point the flash tool will load the recovery to the tablet. DO NOT UNPLUG ANYTHING UNTIL THE FLASH TOOL SHOWS YOU A GREEN CHECK MARK TO INDICATE THAT IT IS DONE, OR YOUR TABLET COULD BE HARD BRICKED AND IRREPARABLE.
5- After you get your check mark, unplug and boot into recovery, hold the Volume + and Power button. When splash screen comes up (the 2 dogs) release the power button.
6- Welcome to TWRP
*Remember, x.12.x requires 2 USB cables to work
ROOT
You can get root by flashing the latest SuperSu zip file located here, be sure to download the flashable zip.
Otherwise, for root, you can use the KingRoot app located here, (get the apk, or "Download for Android") and if you don't want a Chinesse Super User app, you can replace it with the ChainFire SuperSu by going here.
NOTE: This method of replacing KingRoot with SuperSu no longer works properly, and results in a bricked device.
Device Tree
GitHub
CREDITS
@vampirefo (for the CWM Recovery and teaching me about TWRP, there would be no recoveries if it wasn't for him!)
@Bogram (for the lk.bin patch trick)
@smartmanvartan (for the flashing guide)
Reserved
Reserved #2
Hello! I've had my Maven Pro for a couple months now and I still haven't rooted it like I have with the rest of my devices. I'd love to do it too, but reviewing your instructions, I found that my version number is way different. V66-V1.12.20-B. will that version patch tool still work for it? is there an update that it's refusing to download? Thanks!
Edit: on top of this, i can't get it to even connect (step 2) with any of my microUSB cables. (they work with my other devices)
equinox13 said:
Hello! I've had my Maven Pro for a couple months now and I still haven't rooted it like I have with the rest of my devices. I'd love to do it too, but reviewing your instructions, I found that my version number is way different. V66-V1.12.20-B. will that version patch tool still work for it? is there an update that it's refusing to download? Thanks!
Edit: on top of this, i can't get it to even connect (step 2) with any of my microUSB cables. (they work with my other devices)
Click to expand...
Click to collapse
Ooh, a v12, sorry friend, lol. Make sure the tablet is off, and be ready with "Device Manager" open, the preloader only shows up for a bit, then it disappears. The patch tool should still work for you, but the TWRP recovery may not. If it doesn't, the CWM recovery will after I modify it, because it's non-touch.
If neither recovery works for you, you can give me a copy of your "boot.img" file, and I can convert TWRP or CWM to work on your tablet. Also, I've changed the guide up top to include other root methods.
If you have any trouble, by all mean, post, and I'll try to help you through it
Regards,
Nepo
EDIT:
A friend found some V12 firmware, and I'll be uploading it soon. I can get a boot.img file from it to make a recovery.
My maven pro is stuck in a bootloop after I rooted now I don't know what to do. I can't even shut it down
GartimusPrime said:
My maven pro is stuck in a bootloop after I rooted now I don't know what to do. I can't even shut it down
Click to expand...
Click to collapse
You can reflash firmware while it is in a bootloop, I've done this many times. If you have everything set up, drivers, SP Flash Tool, firmware, etc..
Do the following:
1) Startup the Flash Tool and Load your firmware, as described in the OP (be sure to "uncheck" the Preloader)
2) Plug in your micro USB cable to both the PC and the tablet
3) Press and hold the "Reset" button located on the back
4) Click the Download button, then let go of the reset button, it should start flashing the firmware.
If it doesn't the first time, retry steps 3 and 4. I've had it fail the first time before, but work on the second.
Good Luck and let me know how it goes. Also, if the battery is completely drained by the time you read this, just flash firmware normally (again, uncheck the preloader). The tablet has to be powered off to flash it anyway.
Regards
Nepo
So after reflashing my tablet (a Canadian V12 that had V68, and flashed to V66 trying to unlock the boot loader and install CWM), USB doesn't work. The port doesn't output any voltage, and neither does the keyboard connector. The tablet acts like nothing is there, as does the PS3 controller I tried. Also, before, Firmware Update would say there's no updated firmware. Now, it doesn't seem to do anything. I flashed every partition except preloader, MBR and ebr, and the sec partitions. Do I have to reflash again, or is there something else I can do?
On a completely different note, I tried flashing a patched lk.bin, and it failed with an error I don't remember (I had temporary access to a PC).
One more thing that was quite interesting to me. It seems if you reboot into recovery or bootloader from Android (APM+ or root), you're then able to access the recovery with Power + Vol. Up. Is this known, or was it a fluke?
ShadowCX11 said:
So after reflashing my tablet (a Canadian V12 that had V68, and flashed to V66 trying to unlock the boot loader and install CWM), USB doesn't work. The port doesn't output any voltage, and neither does the keyboard connector. The tablet acts like nothing is there, as does the PS3 controller I tried. Also, before, Firmware Update would say there's no updated firmware. Now, it doesn't seem to do anything. I flashed every partition except preloader, MBR and ebr, and the sec partitions. Do I have to reflash again, or is there something else I can do?
On a completely different note, I tried flashing a patched lk.bin, and it failed with an error I don't remember (I had temporary access to a PC).
One more thing that was quite interesting to me. It seems if you reboot into recovery or bootloader from Android (APM+ or root), you're then able to access the recovery with Power + Vol. Up. Is this known, or was it a fluke?
Click to expand...
Click to collapse
No USB is a new one on me, I wish I had a x.12 version of this tablet to test on (mine's x.9) I'd try a re-flash, this time, do everything but the preloader, the reason for not flashing a preloader is because it sometimes semi-bricks one of these tablets.
Interesting note, there was a guy on the Viking thread (RCT6303W87DK) that flashed CWM without unlocking his bootloader, and everything is working fine for him...
Regards,
Nepo
PS, Power + Vol Up is the standard way to enter recovery on this device (I have the Xposed APM+ apk installed too)
NepoRood said:
No USB is a new one on me, I wish I had a x.12 version of this tablet to test on (mine's x.9) I'd try a re-flash, this time, do everything but the preloader, the reason for not flashing a preloader is because it sometimes semi-bricks one of these tablets.
Interesting note, there was a guy on the Viking thread (RCT6303W87DK) that flashed CWM without unlocking his bootloader, and everything is working fine for him...
Regards,
Nepo
PS, Power + Vol Up is the standard way to enter recovery on this device (I have the Xposed APM+ apk installed too)
Click to expand...
Click to collapse
So just a quick question: Is the device /dev/recovery for sure recovery? I want to see if I can just use dd to flash recovery.
ShadowCX11 said:
So just a quick question: Is the device /dev/recovery for sure recovery? I want to see if I can just use dd to flash recovery.
Click to expand...
Click to collapse
Yes, to pull a copy from a running tablet you use dd, and the path is: /dev/recovery
So, I'd do it this way, using adb:
Code:
adb push NAME_OF_RECOVERY.img /data/local/tmp
# Wait for it, then type:
adb shell
#Followed by:
dd if=/data/local/tmp/NAME_OF_RECOVERY.img of=/dev/recovery
#After it finishes:
reboot recovery
Okay, I got CWM installed! Now to see if I can find a way to build TWRP...
ShadowCX11 said:
Okay, I got CWM installed! Now to see if I can find a way to build TWRP...
Click to expand...
Click to collapse
Great! Is the CWM in portrait or landscape? You can always try to port the one I built for the x.9's, just unpack stock recovery, unpack TWRP, swap out the prebuilt kernel and repack.
NepoRood said:
Great! Is the CWM in portrait or landscape? You can always try to port the one I built for the x.9's, just unpack stock recovery, unpack TWRP, swap out the prebuilt kernel and repack.
Click to expand...
Click to collapse
It's in landscape, and works quite well! I just like the touch interface a bit more. I'll try the kernel replacement.
ShadowCX11 said:
It's in landscape, and works quite well! I just like the touch interface a bit more. I'll try the kernel replacement.
Click to expand...
Click to collapse
I prefer TWRP as well, that's why I built it
The only reason I don't have one posted for x.12 users is I can't test it. If you get it to work properly, let me know and I'll add it to the OP so others can benefit. :good:
If not, I can do some builds for you to test, if you don't mind. I have the x.12 kernel in my repo
NepoRood said:
I prefer TWRP as well, that's why I built it
The only reason I don't have one posted for x.12 users is I can't test it. If you get it to work properly, let me know and I'll add it to the OP so others can benefit. :good:
If not, I can do some builds for you to test, if you don't mind. I have the x.12 kernel in my repo
Click to expand...
Click to collapse
Yeah, I can't figure out how to extract the kernel, because I don't usually have access to a PC. However, I'll take some testing builds if you can make them.
Also, back to the USB issue, a reflash of everything except preloader didn't fix it. However, checking the firmware update now tells me that this is the latest version (which is definitely wrong, since I had v68). It must be an incompatibility between the USA and Canadian variants. If you find a Canadian firm dump, can you send me a link?
---
Hmm, okay.
So I just took a look at the model number on my box, and it's RCT5213W87DKF. That extra letter is what changes this a bit. I'll try seeing what I can dig up in terms of OTA updates, and I'll keep posting about what I find.
---
Okay, so after a few packet captures, I found the tablet makes a GET request to http://tablet12.gyrodock.com:2300/OtaUpdater/android?device=RCT6213W87DK with the User-Agent rk29sdk/4.0, but the server returns a 404 page. When I do this in the browser, however, I get something quite peculiar happen, which interests me. Most of the other places on the site return a Tomcat 404 that has the path in the parenthesis. However, for the OTA URL, it just has empty parenthesis. POST requests to that URL return a 200 OK with no return data, which is also interesting. I'll keep hunting around.
Some people might not have a PC to run flash_tool on, so here's how you can flash recovery/uboot/mbr/ebr2/logo/sec_ro from within Android
I'll use recovery as an example. I'm using a V12 tablet, so steps might be different if you have a V9. I tried to make this guide as revision-agnostic as possible, so correct me if I mess something up.
Root your device. The method I use is KingRoot, because it doesn't require any weird things. You can uninstall KingRoot and flash SuperSU later.
Download a recovery image. Make sure if you have a V12 tablet, you download a recovery image for V12, and a V9 recovery for a V9 tablet, or you'll brick your recovery. I personally prefer TWRP, because it has more features and a nicer UI, but CWM works too.
Get shell access. You can use a terminal emulator.
Type in su, and give the terminal superuser access on your device.
Type in dd if=/sdcard/Download/mavenVY_XXX.img of=/dev/recovery, where Y is 9 or 12, and XXX is CWM or twrp3.0.2. This will flash the recovery image.
Finally, type in reboot recovery. This should reboot into your custom recovery! It might also enable Power + Vol Up access to recovery, however, this hasn't been confirmed.
All the other partitions are similar, just replace the references to recovery images with the respective file names for the raw partition, and /dev/recovery with /dev/[PARTITION]. You can NOT flash the android or usrdata partition while in Android or you'll most likely soft-brick your tablet, however, you can boot into TWRP and go to the terminal and do the flash. You must copy your disk images to /tmp when doing so however, or you'll probably lose the disk image during the flash, effectively causing a brick.
Hope this helps people out!
ShadowCX11 said:
I've found out that it seems the v12 tablets strictly enforce the checksums of partition images, so flashing a custom recovery or uboot does not work with flashtool.
Click to expand...
Click to collapse
Nice addition, but all you have to do is disable it in the Checksum.ini file (change the 1 to 0):
Code:
[IsEnableChecksum]
CHECKSUM_SWITCH=0
I did that for the v9 versions, but only uploaded the v12 firmware...
NepoRood said:
Nice addition, but all you have to do is disable it in the Checksum.ini file (change the 1 to 0):
Code:
[IsEnableChecksum]
CHECKSUM_SWITCH=0
I did that for the v9 versions, but only uploaded the v12 firmware...
Click to expand...
Click to collapse
Oh... makes sense...
ShadowCX11 said:
Oh... makes sense...
Click to expand...
Click to collapse
I'm glad you posted that info, it'll be super handy for folks that may not have access to a PC, or would rather use their device instead of a PC :good:
STEP BY STEP GUIDE FOR LG V20 H918 UNLOCKING BOOTLOADER, DOWNGRADING, ROOTING AND INSTALLING CUSTOM ROMS (NOOB FRIENDLY)
DISCLAIMER: I'M NOT THE DEVELOPER OF ANY OF THE BELOW SOFTWARE'S AND YOU PROCEED WITH YOUR OWN RISK AS THIS INVOLVES BRICKING OR DAMAGING YOUR MOBILE IF THE PROCEDURE IS NOT FOLLOWED CORRECTLY. I'M JUST SHARING THE WHOLE PROCESS WHICH I HAVE FOLLOWED TO ROOT AND INSTALL TWRP IN MY LGV20 H918 UNLOCKED T MOBILE.
AND I HAVE TESTED THIS IN MY OWN DEVICE AND WAS ABLE TO ROOT AND ACHIEVE TWRP.
THIS IS ONLY FOR LGV20 H918 VERSION
ENSURE INTERNET IS UP AND RUNNING IN YOUR PC
EDIT: THE WHOLE PROCESS HAS NOW BEEN AUTOMATED IN TWO SIMPLE STEPS TO PREVENT ANY POTENTIAL DAMAGE TO YOUR DEVICE. THANKS TO THE LAFSPLOIT CREATOR BRIAN @runningnak3d.
JUST FOLLOW THE PROCEDURE BELOW AND YOU SHOULD HAVE YOUR DEVICE ROOTED IN NO TIME
1. BACKUP ALL YOUR IMPORTANT DATA BEFORE PROCEEDING.
2.MAKE SURE YOU HAVE CHARGED YOUR PHONE TO AT LEAST 90 PERCENT
CHECK YOUR PHONE SOFTWARE VERSION IN SETTINGS---ABOUT PHONE----SOFTWARE INFO
IF IT IS ANYTHING BETWEEN H91810P TO H91810U MEANS IT IS ARB1 (ANTI ROLL BACK 1) AND YOU NEED TO USE LAFSPLOIT METHOD TO ROOT AND INSTALL TWRP,
IF YOUR VERSION IS H91810O OR BELOW (ARB0), YOU CAN EITHER USE DIRTYCOW OR LAFSPLOIT METHOD FOR THE SAME.
IF YOU ARE ON ARB1, PLEASE FOLLOW THE METHOD BELOW,
PART 1: DOWNGRADING
IF YOUR VERSION IS H91810 (Q, R, S, T, U) YOU NEED TO DOWNGRADE TO A LOWER VERSION ( H91810P) TO EXECUTE LAFSPLOIT.
IF YOU ARE ALREADY ON H91810P, YOU STILL NEED TO RE FLASH THE H91810P KDZ AGAIN FOR THE LAFSPLOIT SCRIPT TO WORK CORRECTLY.
DOWNLOAD H91810P KDZ FILE FROM BELOW
https://androidfilehost.com/?w=files&flid=282709
DOWNLOAD AND INSTALL ALL THE FILES BELOW IN YOUR PC
UPPERCUT AND LGUP----
http://downloads.codefi.re/autoprime/LG/Flash_Tools/LGUP/
LG DRIVERS---
http://tool.cdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
CONNECT YOUR MOBILE TO YOUR PC IN DOWNLOAD MODE (SWITCH OFF YOUR MOBILE AND CONNECT THE USB FROM PC WHILE HOLDING THE VOLUME UP BUTTON SIMULTANEOUSLY)
RUN UPPERCUT.EXE WHICH WOULD OPEN LG'S UPDATER TOOL AUTOMATICALLY.
INSIDE THE LG UPDATER TOOL, CLICK ON BIN AND SELECT THE H91810P KDZ FILE DOWNLOADED EARLIER.
NOW SELECT UPGRADE AND FLASH
ENSURE THE USB CABLE IS CONNECTED THROUGH THE FLASHING PROCESS AND WAIT FOR YOUR PHONE TO REBOOT AND THEN REMOVE THE USB CABLE.
CHECK THE SOFTWARE VERSION AND ENSURE IT IS H91810P
PART 2: UNLOCKING BOOTLOADER
HEAD TO SETTINGS---ABOUT PHONE----SOFTWARE INFO (ENSURE IT IS H91810P)
ENABLE DEVELOPER OPTION IN YOUR PHONE BY CLICKING ON THE BUILD NUMBER MULTIPLE TIMES
NOW HEAD TO SETTINGS---DEVELOPER OPTIONS
TURN ON OEM UNLOCKING, ENABLE USB DEBUGGING AND DISABLE 'VERIFY APPS OVER USB'
NOW CONNECT YOUR PHONE TO PC AND OPEN ADB COMMAND CENTER PROMPT IN YOUR PC
adb devices---->CHECK IF YOUR MOBILE IS CORRECTLY RECOGNIZED IN ADB
adb reboot bootloader--->THIS REBOOTS YOUR DEVICE IN FASTBOOT MODE
fastboot devices---->CHECK IF YOUR MOBILE IS CORRECTLY RECOGNIZED IN FASTBOOT
fastboot oem unlock---->THIS COMMAND WOULD UNLOCK YOUR BOOTLOADER AND RESET's YOUR DEVICE.
fastboot oem device-info OR fastboot getvar unlocked ----->THIS WOULD CONFIRM IF YOUR BOOTLOADER HAS BEEN UNLOCKED OR NOT.
fastboot reboot-----> THIS WOULD REBOOT YOUR DEVICE
IF THE BOOTLOADER HAS BEEN SUCCESSFULLY UNLOCKED, THE DEVICE WILL SHOW AN UNLOCKED BOOTLOADER WARNING MESSAGE WHILE BOOTING (THIS CAN BE IGNORED OF COURSE)
PART 3: CREATING A BOOTABLE LINUX USB USING FWUL
DOWNLOAD FWUL_v2.7_x86_64_15GB.zip FROM THE LINK BELOW AND EXTRACT THE IMAGE FILE SOMEWHERE IN YOUR PC.
https://androidfilehost.com/?w=files&flid=214529
DOWNLOAD RUFUS FROM BELOW AND INSTALL
https://rufus.akeo.ie/
INSERT A PEN DRIVE IN YOUR PC AND RUN RUFUS.
INSIDE RUFUS SELECT THE IMAGE FILE AND SELECT START (AFTER SELECTING START SELECT DD MODE IN THE DIALOGUE BOX) TO CREATE A BOOTABLE PEN DRIVE (WARNING: THIS WOULD FORMAT YOUR PEN DRIVE)
NOW YOU SHOULD BOOT YOUR PC FROM THE BOOTABLE USB STICK WHICH YOU HAVE JUST CREATED
THIS WOULD MAKE YOUR PC RUN LINUX OS
TYPE PASSWORD AS linux AND ENTER
PART 4: INSTALLING TWRP AND ROOTING USING LAFSPLOIT
BEFORE PROCEEDING ENSURE YOU BOOT YOUR PHONE AND DONE ALL THE BASIC SETTINGS
NOW HEAD TO THE DEVELOPER OPTIONS IN YOUR DEVICE AND ENSURE OEM UNLOCKING AND USB DEBUGGING ARE SWITCHED ON.
NOW CONNECT YOUR DEVICE TO THE PC (RUNNING LINUX OS FROM PENDRIVE) IN DOWNLOAD MODE (SWITCH OFF YOUR MOBILE AND CONNECT THE USB FROM PC WHILE HOLDING THE VOLUME UP BUTTON SIMULTANEOUSLY)
DOUBLE CLICK ON THE LG FOLDER INSIDE FWUL DESKTOP
INSIDE THAT, DOUBLE CLICK ON LGLAF(RUNNINGNAK3D) ICON WHICH WILL OPEN A TERMINAL
ENTER THE BELOW COMMANDS
git pull
git checkout h918-miscwrte
./step1.sh
THE ABOVE COMMAND FLASHES TWRP RECOVERY ONTO YOUR DEVICE.
WAIT AND PULL OUT YOUR DEVICE WHEN IT ASKS TO.
RECOMMENDED: NOW THAT TWRP HAS SUCCESSFULLY INSTALLED, YOU CAN MANUALLY FORMAT,FLASH LATEST TWRP RECOVERY AND USE ANY METHOD LIKE MAGISK OR SU FOR ROOTING.
INSIDE TWRP RECOVERY. FIRST FORMAT USING WIPE--ADVANCED FORMAT--TYPE yes AND FULL DO A FULL FORMAT, THEN FLASH MAGISK AND THE LATEST TWRP RECOVERY BELOW.
MAGISK ZIP DOWNLOAD:
https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
LATEST TWRP BY PHOENIX(H918):
https://forum.xda-developers.com/v20/development/recovery-twrp-3-2-1-0-t3720239
OR
IF YOU ARE UNSURE ABOUT FORMATTING AND FLASHING, JUST USE THE BELOW COMMAND TO DO ALL THE WORK AUTOMATICALLY
CONNECT YOUR DEVICE AGAIN IN DOWNLOAD MODE AND ENTER THE FOLLOWING COMMAND
./step2.sh
THE ABOVE COMMAND FORMATS YOUR DEVICE AND FLASHES MAGISK TO ACQUIRE ROOT.
TIP : IF YOU FACE ANY ENCRYPTION ERROR AFTER USING STEP2. SH, DO A ADVANCED FORMAT WITHIN TWRP AND FLASH MAGISK AND LATEST TWRP BY PHOENIX MANUALLY.
YOU ARE NOW ROOTED WITH TWRP RECOVERY INSTALLED.
REMEMBER TO BACK UP THE CURRENT ROM BEFORE FLASHING ANYTHING..... DO CHECK POST #2 FOR OTHER TWEAKS
IF YOU WISH TO UPDATE TO LATEST STOCK (10U) AND KEEP ROOT AND TWRP, JUST FOLLOW THIS LINK AND DO REMEMBER TO ROOT USING MAGISK AFTER FLASHING THE ROM BEFORE YOU BOOT.
https://forum.xda-developers.com/v20/development/rom-h91810q-stock-rom-twrp-flashable-zip-t3681312
I WOULD LIKE TO THANK ALL THE DEVOLEPERS WHO HAVE CREATED THE ABOVE SOFTWARES WITHOUT WHICH THIS ISNT POSSIBLE.
CREDITS:
@autoprime FOR HIS UPPERCUT TOOL
@steadfasterX FOR HIS FWUL TOOL
@Phoenix591 FOR HIS WORKS ON TWRP RECOVERY
AND FINALLY, @runningnak3d FOR HIS EXCELLENT WORK IN ROOTING OUR DEVICE :good:
WHAT NEXT?
NOW THAT YOU HAVE ROOTED YOUR MOBILE, I WOULD RECOMMEND DOING THE BELOW TWEAKS FOR FURTHER ENHANCED EXPERIENCE....
1.THERMAL THROTTLING
IF YOUR ARE STILL ON A STOCK BASED ROM , I WOULD STRONGLY RECOMMEND TO RECONFIGURE YOUR THERMAL FILE TO PREVENT ANY POSSIBLE LAG WHEN USING EXTENSIVELY...
FIRST DOWNLOAD THE FILE BELOW:
https://drive.google.com/file/d/0B0W3xXHgfOxvLUpKNWhrWDE0TDg/view
USE A ROOT EXPLORER (PREFERABLY ES EXPLORER) AND GO TO ROOT/SYSTEM/ETC.
YOU SHOULD HAVE A FILE NAMED thermal-engine-8996.conf
RENAME IT TO thermal-engine-8996.conf.bak (JUST FOR A BACKUP IF ANYTHING GOES WRONG)
ENSURE THE ABOVE DOWNLOADED FILE IS IN .conf FORMAT
IF IT ISN'T , RENAME TO thermal-engine-8996.conf
NOW SAVE THE FILE TO THE SAME DIRECTORY VIZ ROOT/SYSTEM/ETC
GIVE PERMISSION TO THIS FILE TO rw-r--r-- USING THE ROOT EXPLORER ( SELECT FILE--->PERMISSION--->READ WRITE, READ, READ)
FINALLY SAVE AND REBOOT.
THIS WOULD OVERWRITE THE THERMAL LINKED PERFORMANCE OF THE CPU TO AVOID ANY LAG WHEN USING EXTENSIVELY.
2. RCTD REMOVER
ALSO I WOULD STRONGLY RECOMMEND TO REMOVE THE LG'S RCTD CCMD AND TRITON MONITORS AS THESE WOULD RUN CONTINUOUSLY IN A ROOTED LG PHONE AND CONSUME LOT OF RESOURCES...
JUST INSTALL THE RCTD REMOVER APP FROM BELOW LINK:
https://labs.xda-developers.com/store/app/com.zacharee1.rctdremoverforlg
GRANT SU PERMISSION AND CHECK THE DESIRED FILES (I CHOSE ALL THREE FILES) AND CLICK ON PATCH, FLASH IMAGE AND REBOOT (THIS WOULD PATCH THE BOOT FILE, SO AGAIN IT IS ADVISABLE TO CREATE A BACKUP OF THE CURRENT BOOT IMAGE USING TWRP OR WITHIN THIS APP ITSELF)
3. SCREEN CALIBRATION:
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
INSTALL KERNAL AUDITOR APP FROM PLAY STORE AND GRANT SU ACCESS
CHANGE THE BELOW VALUES WITHIN THIS APP (SCREEN SETTINGS)
Minimum RGB value = 35
Saturation Intensity = 27
Screen Hue = 1520
Screen Value = 112
Screen Contrast = 132
THIS WOULD SOMEWHAT REDUCE THE BLUE TINGE AND GHOST APPEARANCES OF THE SCREEN
CREDITS: @Holyman007 for his thermal tweak @Zacharee1 for his rctd remover app
I was just about to create a post asking for a step by step for dummies so thank you very much for this! Going to do this sometime tomorrow or Tuesday and will update if I succeed or not. :good:
Got a question. Does this method stop the second screen from working?
turdbait said:
I was just about to create a post asking for a step by step for dummies so thank you very much for this! Going to do this sometime tomorrow or Tuesday and will update if I succeed or not. :good:
Got a question. Does this method stop the second screen from working?
Click to expand...
Click to collapse
this would end up with a stock rooted phone with twrp recovery if all the methods are correctly followed..
......final result would be.... you would end up with a rooted stock rom with a twrp recovery....
your second screen will work perfectly.....
please let me know if you need a different thread for installing custom rom, and to reduce the lag., install sound mod to get maximum sound output and customize second screen... i will create a noob friendly thread for these as well......
Also check the original lafsploit thread @
https://forum.xda-developers.com/v20/how-to/root-lafsploit-h918-version-t3773443
kish9046 said:
Also check the original lafsploit thread @
https://forum.xda-developers.com/v20/how-to/root-lafsploit-h918-version-t3773443
Click to expand...
Click to collapse
Thank you, I've been reading up on the main lafsploit thread for awhile but I was still not sure about the whole flashing KDZ file and stuff so when you posted this thread it was a motivator to try it out. Got a day off from work tomorrow so gonna try it then so I don't got to worry about the time.
I'm interested in the max sound output and second screen customization if you got the time and its not to much to ask. If you want to wait till either someone else comes along thats interested or till I root just so you don't waste your time I shall update hopefully sometime tomorrow. Thanks again.
kish9046 said:
sha256sum h918-twrp.img ----> THIS WOULD AGAIN THROW A HASH, CHECK IF BOTH THE HASHES ARE ABSOLUTELY SIMILAR
Click to expand...
Click to collapse
Excellent. Just a friendly suggestion, however. I would change the instruction above to use the word EXACT instead of SIMILAR, otherwise people may continue erroneously. The hash numbers must be exact.
onlineaces said:
Excellent. Just a friendly suggestion, however. I would change the instruction above to use the word EXACT instead of SIMILAR, otherwise people may continue erroneously. The hash numbers must be exact.
Click to expand...
Click to collapse
Thanks for the heads up.... Changed to EXACT...
I successfully have root now, thank you! If you're still interested in doing a guide on how to do the second screen customization I'd be grateful.
turdbait said:
I successfully have root now, thank you! If you're still interested in doing a guide on how to do the second screen customization I'd be grateful.
Click to expand...
Click to collapse
great to hear that u have root now.... will post soon on other mods including a step-by-step process on removing rct soon....
All this stuff can be found already in the forums so you posting guides is redundant js
Sent from my LG-H910 using XDA Labs
cnjax said:
All this stuff can be found already in the forums so you posting guides is redundant js
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
Thanks for the suggestion... but i thought this would help noobs like me to explore more about our device without doing any harm to it.....
Glad someone actually laid it out step by step.
kish9046 said:
Thanks for the suggestion... but i thought this would help noobs like me to explore more about our device without doing any harm to it.....
Click to expand...
Click to collapse
so i just wanted to say thank for for the very noobie step by step guide. im soooo use to odion and adb flash commands.
just 1 thing i had trouble with was trying to push magisk and twrp over. I rooted by pushing magisk over with otg but no twrp on recovery. then i saw it said it was on download mode. from dl mode i just flashed twrp to recovery.
BROKEN1981 said:
so i just wanted to say thank for for the very noobie step by step guide. im soooo use to odion and adb flash commands.
just 1 thing i had trouble with was trying to push magisk and twrp over. I rooted by pushing magisk over with otg but no twrp on recovery. then i saw it said it was on download mode. from dl mode i just flashed twrp to recovery.
Click to expand...
Click to collapse
So i assume you have both TWRP and root now?..... And can i ask which version r u in now....ARB0 or 1
kish9046 said:
So i assume you have both TWRP and root now?..... And can i ask which version r u in now....ARB0 or 1
Click to expand...
Click to collapse
Abr1 yes I am rooted with twrp.
As I said, the commands to push magisk and twrp to sd did not work. I used usb otg in twrp to push magisk, but forgot to put twrp to flash as well.
I forgot that twrp had replaced download mode, so I was going a bit nuts trying to figure out how to get twrp to recovery. Lolol
Now I'm on latest update with rtcd removed thanks to the op who hosted it on xda as a flashable zip.
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
tenkensword said:
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
Click to expand...
Click to collapse
As you are in twrp, you can manually flash magisk zip and twrp recovery.....
tenkensword said:
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
Click to expand...
Click to collapse
Download magisk and twrp here https://androidfilehost.com/?fid=746010030569963731
While you are in the last step, in mount, select otg USB. You can push it to SD card and manual flash.
If you booted to system without magisk and flashing twrp, power off the phone, hold volume up, put in the USB, connect to PC. This will put you in twrp since download mode is replaced by twrp.
Now you can flash both files.
tenkensword said:
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
Click to expand...
Click to collapse
Download magisk and twrp here https://androidfilehost.com/?fid=746010030569963731
While you are in the last step, in mount, select otg USB. You can push it to SD card and manual flash.
If you booted to system without magisk and flashing twrp, power off the phone, hold volume up, put in the USB, connect to PC. This will put you in twrp since download mode is replaced by twrp.
Now you can flash both files.