Greetings,
I'm trying to recover the data from Samsung Galaxy S5 (the label on the inside says SM-G900F). The phone has broken screen (nothing shows, no touch). The phone is not rooted and has no custom recovery and no debugging enabled.
I've managed to connect it via HDMI to TV and I can see that it boots correctly. The lock screen unlocks with Fingerprint or Password. The problem is, that the phone has been broken for a while and the owner doesn't seem to remember the correct password.
I rebooted into download mode and tried to install custom recovery via Odin. Here is what I got:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Any recommendations will be really welcome at this point.
Hi !
Have you tried this toolkit ?
https://forum.xda-developers.com/showthread.php?t=2719834
Good luck !
Related
Hey everyone,
I have first tried to update my cellphone both directly via the phone itself and smart switch with no success. I have no idea why these two didn't work and because I am a very stubborn person I have googled the issue and found out that I can flash a firmware via Odin. Which I tried as well.
My old firmware was G920FXXU1AOD4, I tried to flash the version G920FXXU2BOGG.
Sadly, the result was this :
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am now unable to reboot my phone properly. I have tried to use Smart Switch to use the emergency recovery but it seems like it doesn't recognize my phone so it's not working.
I have also tried to flash a recovery system called twrp but it didn't work either and wouldn't let me enter the recovery system.
I have no idea what to do anymore. My phone is a week old and I feel really stupid for ruining it because I was stubborn and wanted it updated. I am a rookie with flashing, rooting, etc.. I have never done this before.
Any idea of what I can do ? Thanks a lot for any future help, you have my phone's life in your hands and I couldnt be thankful enough if I manage to save it thanks to you all.
Bring your S6 back to Samsung for warranty repair.
Hello. Sorry for my enlgish.
Theres a soft-bricked SM-P900, I can normally open download mode. (But on normal system loading it asking for Kies)
(Samsung Galaxy Note Pro 12.2 WiFi SM-P900)
No ROM installed now. I just can't install it.
Here's the Odin log:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's always stucks on "system.img" in ANY .tar I try to flash.
Yesterday, it could power on. But now it's not powering on at all. I hope this is because of battery charge.
===UPD: Yes, it was because of battery charge. Now it's powered on
===UPD2: Now it's powered off again and I can't power it on, what the hell?...
What should I do, guys? Help, please!
Thread closed / Duplicate
odin 3.10 says this when i try to install firmware on my bricked s6 edge.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me.
Mate ur failed is at bootloader means u Trying to flash old bootloader on newer one then knox wont let u install it success so download the latest fw from sammobile firmweare then flash it again ok
Good luck,,
Hey guys,
I'm trying to root my S6 (Canada/Bell Provider/SM-G920W8) and running into the following issue,
Enabled Developer options and USB debugging
Downloaded CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Downloaded and installed the latest drivers
Turned off and back on into Download mode
Opened Odin3 v3.10 as Administrator
Selected AP and added CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Clicked start
and I'm getting the following from Odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not quite sure how fix the issue. Any help would be great.
Thanks
amirbehain said:
Hey guys,
I'm trying to root my S6 (Canada/Bell Provider/SM-G920W8) and running into the following issue,
Enabled Developer options and USB debugging
Downloaded CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Downloaded and installed the latest drivers
Turned off and back on into Download mode
Opened Odin3 v3.10 as Administrator
Selected AP and added CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Clicked start
and I'm getting the following from Odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not quite sure how fix the issue. Any help would be great.
Thanks
Click to expand...
Click to collapse
im having the same issue did you figure out how to fix it and root ?
Trying to root my galaxy Samsung s6 g920w8 ? Can anyone help ?
rootman81 said:
Trying to root my galaxy Samsung s6 g920w8 ? Can anyone help ?
Click to expand...
Click to collapse
have any of you tried Odin 3.13.1?
Hi Dear;
i have a problem with s6. I rooted it 1 year ago. Than i will try to remove root. When i try to unroot my phone will crush.Than i cant open it. I found the stock rom in internet but i can't flash it. I see this error o odin. How can i fix it . Please help me guys. Save me from this trouble.
I add 4 rom to odin BL-AP-CP-CSC all stock rom. Than it's error.
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is it G920F?