Hey everyone,
I have first tried to update my cellphone both directly via the phone itself and smart switch with no success. I have no idea why these two didn't work and because I am a very stubborn person I have googled the issue and found out that I can flash a firmware via Odin. Which I tried as well.
My old firmware was G920FXXU1AOD4, I tried to flash the version G920FXXU2BOGG.
Sadly, the result was this :
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am now unable to reboot my phone properly. I have tried to use Smart Switch to use the emergency recovery but it seems like it doesn't recognize my phone so it's not working.
I have also tried to flash a recovery system called twrp but it didn't work either and wouldn't let me enter the recovery system.
I have no idea what to do anymore. My phone is a week old and I feel really stupid for ruining it because I was stubborn and wanted it updated. I am a rookie with flashing, rooting, etc.. I have never done this before.
Any idea of what I can do ? Thanks a lot for any future help, you have my phone's life in your hands and I couldnt be thankful enough if I manage to save it thanks to you all.
Bring your S6 back to Samsung for warranty repair.
Related
Emm... I was trying to upgrade my GT-P6200 and it kept showing failure .
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> Sbl.bin
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I`ve changed PCs or USB ports,nothing changes , I am gonna crazy about this ,man !
I am in China . Could this contributes to the problem? Like special bootloader or sth like that?:crying::crying::crying:
check sammobile
go to sammobile.com
register.
then search for the austrian 4.0.4 firmware page.
see the additional files that are there under the firmware download, that has links to the correct drivers / version odin and a manual
it also has a service manual whose passwords is samfirmware.com
use all the tools provided there and check if it works again.
Greetings,
I'm trying to recover the data from Samsung Galaxy S5 (the label on the inside says SM-G900F). The phone has broken screen (nothing shows, no touch). The phone is not rooted and has no custom recovery and no debugging enabled.
I've managed to connect it via HDMI to TV and I can see that it boots correctly. The lock screen unlocks with Fingerprint or Password. The problem is, that the phone has been broken for a while and the owner doesn't seem to remember the correct password.
I rebooted into download mode and tried to install custom recovery via Odin. Here is what I got:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Any recommendations will be really welcome at this point.
Hi !
Have you tried this toolkit ?
https://forum.xda-developers.com/showthread.php?t=2719834
Good luck !
Hello all,
I have a Samsung Galaxy S7, from Rogers but unlocked, version SM-G930W8 that I bought second hand.
Phone was rooted, I factory reset it to prepare it for my wife, then installed apps and moved data and everything.
Turned the phone off and put it aside, the next day I bought a new Nano SIM, turned it ON and I got "Custom binary blocked by FRP lock".
I downloaded G930W8VLU1APG1_G930W8OYA1APG1_XAC tried flashing via ODIN and got this:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the phone I had: SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1
Tried: twrp-3.0.2-4-herolte.img.tar with Odin
It goes all the way through but fails at the end with this message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the phone I had: Custom Binary(Recovery) Blocked by FRP Lock
Also I have tried multiple computers, multiple cables, multiple versions of ODIN, ...
Now the phone is stuck at the Samsung screen and won’t turn on or off, until the battery dies.
Tried Smart Switch but it asks for the serial number, which I do not have. (There is just IMEI on the back of the phone)
Not sure but I think somehow after the factory reset the OEM Unlock got disabled.
Any help is greatly appreciated.
Did you ever figure this out? I'm facing the same thing and hoping my phone isn't bricked.
https://forum.xda-developers.com/galaxy-s7/help/potentially-bricked-s7-flat-custom-t3583502
This will fix and let you flash.
1) Open Odin, place all the necessary files into their slots.
2) Go the the options tab, make sure "Auto Reboot" IS ticked.
3) Press "start", but as soon as you do, hold down Vol down+Home+Power on your phone.
Odin will fail and your phone will reboot into download mode again.
Now press "Start" in Odin again, and your phone should flash without a problem.
This might take a few attempts to get right, but I hope it helps.
Hi Dear;
i have a problem with s6. I rooted it 1 year ago. Than i will try to remove root. When i try to unroot my phone will crush.Than i cant open it. I found the stock rom in internet but i can't flash it. I see this error o odin. How can i fix it . Please help me guys. Save me from this trouble.
I add 4 rom to odin BL-AP-CP-CSC all stock rom. Than it's error.
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is it G920F?
Hey,
I keep having issues with my S8+ that has never been rooted. I flashed it trying to fix an issue with my WiFi forgetting saved networks. If I turned off WiFi or rebooted my phone it forget all saved networks.
I used Samfirm and Odin 3.12.7 to flash it to the latest firmware AQJ4 and then did an OTA update that popped up. I'm still having the issue but keep getting a notification about "Unauthorized modifications, reboot".
Now, I can't even flash the phone anymore... I keep getting a Fail! (Auth) error when trying to flash BL, AP, or CSC... CP seems to work fine.
I've tried everythign I can find online but nothing helps... When in download mode I see:
FRP Lock is off
Warranty Voidis 0x0
System Status is Official
The one thing I've noticed is that my device shows Baseband version AQJ4 but my Build number is AQK3... Is that normal?
Any ideas?
Code:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> userdata.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)