Hello!
I have been trying to flash a new ROM into my ZTE Nubia Z5s phone. I have tried many versions, but the majority of installations didn't end successfully. However, after the last try, the phone got stuck on showing the logo. After waiting for nearly an hour, I started to think that it's not going to change and shut the phone down. However, after turning it back on, the screen started to show weird color combinations (similar to how a physically damaged screen behaves) after the logo. Physical damage is rather impossible, because both the logo and the battery indicator look fine. The problem is, I can't reach recovery mode by pressing VOL+ and Power, and I also can't sideload a new ROM (ADB can't find the device, and the phone is being treated by my PC as a flash drive). What can I do now? Any help would be much appreciated.
Wojtek
Hi there and welcome to assist,
Unfortunately there is nothing about your question/device on XDA forum. Try a Google search first or contact the manufacturer for stock firmware and flashing instructions.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck
Related
First of all i have no knowledge on how to fix my phone or flashing.
My question title are based on what i read from other threads.
My Problem
Connected Phone to USB to Charge
Removed Phone from USB
Lock Screen wont appear
Decided to Reboot the phone
After Rebooting, I got stuck at loading/bootloading screen
Decided to go to Factory menu by holding Vol Down and Power
Chose Reboot Option
After that, the phone rebooted nonstop like 5 times and turned off.
Now my phone won't charge, or power up
Now trying to find how to fix it for hours now
My phone has an internal battery and memory / non removable - cause all the threads about flashing and videos about flashing i watched was removing batteries (but i have an internal battery )
It is a rebranded china phone called Cherry Mobile Omega Infinity.
According to the SPECS sheet:
Mediatek MT6592 1.7GHz octa-core CPU.
Now all i need are the whats and how guides.
Thanks in advance
XDA Visitor said:
First of all i have no knowledge on how to fix my phone or flashing.
My question title are based on what i read from other threads.
My Problem
Connected Phone to USB to Charge
Removed Phone from USB
Lock Screen wont appear
Decided to Reboot the phone
After Rebooting, I got stuck at loading/bootloading screen
Decided to go to Factory menu by holding Vol Down and Power
Chose Reboot Option
After that, the phone rebooted nonstop like 5 times and turned off.
Now my phone won't charge, or power up
Now trying to find how to fix it for hours now
My phone has an internal battery and memory / non removable - cause all the threads about flashing and videos about flashing i watched was removing batteries (but i have an internal battery )
It is a rebranded china phone called Cherry Mobile Omega Infinity.
According to the SPECS sheet:
Mediatek MT6592 1.7GHz octa-core CPU.
Now all i need are the whats and how guides.
Thanks in advance
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, you may ask for help here: (see below)
Android Q&A, Help & Troubleshooting
You will have a much much better chance of getting an answer in the above thread.
TEKHD said:
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, you may ask for help here: (see below)
Android Q&A, Help & Troubleshooting
You will have a much much better chance of getting an answer in the above thread.
Click to expand...
Click to collapse
HI!
yes thanks for the reply. i got logged out it seems. i have another post like this one with my acct name on it. just delete the other one if necessary.:good:
This morning while trying to root my G3, I ended up soft bricking it. Fun times. My biggest issue is that every walk-through on fixing it requires a boot into download mode, which does not seem to work. I can boot into recovery mode just fine, but when I hold volume up and plug in the USB cable it displays my current battery level. I tried the same process with the battery removed, and it did the same but instead of showing the battery charging, it just had a yellow question mark sign.
Thank you for any help you can give!
Hi,
Your best option is asking the experts who own your device in this dedicated help thread in your device section,
http://forum.xda-developers.com/lg-g3/help/help-thread-lg-g3-question-t2947298
Good luck!
I have a i9063t and apparently it's hard bricked. I won this a couple months ago and it had a problem very annoying of reseting alone all the time, mostly when I was in the middle of something important. I tried to put it back to factory but it didn't fix the problem. So I tried to fix it thinking "This may be a software problem, since it has no official update, I'll put a custom rom in it!" ... Installed Odin, Kies, wiped to factory, put it download mode, connected and chose a rom that apparently worked for this device. Then something happened. Odin just crashed, and my phone it's stuck in the samsung logo. It doesn't go to download mode anymore neither recovery mode! When I turn it on it goes to the logo or the charging animation if it's plugged. Odin doesn't recognize it anymore since it doesn't go to download mode. I'm really desperate for this, is my only phone and I have no money for a new one or technical assistance (will cost me almost a new one) and I really need it (and feel pretty stupid that I've bricked it). I've tried a lot of tutorials but all of them requires download mode. I've also read somewhere that all the bricks may have a solution, some are simple, but some are funky. I really really need help here. This ! is always on top. Anything you may know is helpful, please.
Hi,
Thanks for using XDA assist.
Unfortunately, when your device can not access the recovery or download mode, your phone may not be able to be repaired by the user. You may be able to use the Emergency Firmware recovery in Kies to restore your phone to stock firmware, that's only if it can detect your device. Maybe a mobile service center can restore it back to life, but they do charge quite a bit depending on where you live.
Alternatively, you can register a XDA account and post in the Android Q&A, Help & Troubleshooting forum so that someone else may be able to help you out.
Good Luck! - gsstudios
Good morning to all of the bosses here and to everybody...I am also new in adventuring in custom rom flashing. Oh God, I just afford a zenfone 6 and quickly I decided to mod it with custom roms. I tempted to update it manually to lollipop and it was successful. Then I decided to downgrade to kitkat in order to unlock the bootloader. I was served on internet with 2 ota files(6.2.2.2 and 6.3.3.3). I flashed the file 1 with success but as for the file 2, my phone didn't finished the process and switched off itself. I turned it on and it directly went on recovery trying to finish the downgrade. When the phone tried to reboot it stucked on asus logo. I went on recovery and made a hard reset, but it kept stuck on the asus logo at boot. Now came the bad luck; I found tutorial on internet on how to unbrick zenfones. I precise that almost all the tutorials spoke about the case zenfone 5 and 6 are stuck on usb logo, but mine manifested itself in a cycle of 5 to 7 reboots before showing the usb logo and then turns off itself definitively about one minute after that usb logo, and I have to turn it on again for a new cycle again. So that bad luck is that I saw that tutorial to unbrick zenfone with a method using usb intelsoc and other tools I forgot the names. I installed these stuffs with success and my device could be detected ready for flashing. The files that had to be flashed are fastboot.bin, ifwi.bin, dnx.bin, osr dnx.bin...I flashed them successfully, but unlesse I get my phone on its usual asus droidboot screen, it ended up by a frozen intel inside logo. I tried to put it into droidboot or recovrey, but to no vail. The reboot cycle was still there. Then I saw a tutorial on zenfone 5 stuck at intel inside logo where it was said to add a file called ...fuse.bin. I tried to find one for zenfone 6, but I didn't find it...so...so...so I used that fuse.bin intended for zenfone 5 and flashed my zenfone with it. The flash wax successful but when the phone rebooted...BLACK SCREEN!!! With some vertical white stripes appeared. No image, but cycle of reboot continue without the usb logo this time. The phone is still detectable and I even tried to reflash the previous file without that bad fuse.bin, successful but screen is still black...oh God help me, oh my new phone, everybody here help me recover my phone please!!! The version of my phone is TW version...thanks in advance!
Hello and thank you for using XDA Assist,
your device don't have a device specific forum here on XDA. Please create a thread here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you. Good luck!
Kind regards
Trafalgar Square
XDA Assist
Hi Guys
Can someone point me in the right direction with a problem with my new phone.
Basically I recently bought a ulefone Vienna (1 month and my 1st Android phone). It was working fine and on the stock rom and no changes to the system. Yesterday I did a OTA update and now my phone is stuck in a bootloop.
The phone just restarts and after after the company logo I get the Android man with an exclamation mark.
I have downloaded all the stuff to flash the phone from ulefone but as the phone keeps restarting and rebooting I can not get the PC to install the drivers.
The PC recognises the phone when the company logo is on the phone and starts to install the drivers but when I get the Android man the PC says the phone is unplugged.
I am IT literate and don't mind getting my hands dirty but I am a recent convert to Android. I want to fix the issue myself because that's the way to learn but I am a little out of my depth.
I have read that ADB can stop the boot sequence so any pointers to what I need to read and understand to fix this issue would be greatly appreciated.
Thanks.
The_Bionic_Man said:
Hi Guys
Can someone point me in the right direction with a problem with my new phone.
Basically I recently bought a ulefone Vienna (1 month and my 1st Android phone). It was working fine and on the stock rom and no changes to the system. Yesterday I did a OTA update and now my phone is stuck in a bootloop.
The phone just restarts and after after the company logo I get the Android man with an exclamation mark.
I have downloaded all the stuff to flash the phone from ulefone but as the phone keeps restarting and rebooting I can not get the PC to install the drivers.
The PC recognises the phone when the company logo is on the phone and starts to install the drivers but when I get the Android man the PC says the phone is unplugged.
I am IT literate and don't mind getting my hands dirty but I am a recent convert to Android. I want to fix the issue myself because that's the way to learn but I am a little out of my depth.
I have read that ADB can stop the boot sequence so any pointers to what I need to read and understand to fix this issue would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except these two threads:
Ulefone Vienna - Development & Support
Ulefone Vienna - Information & Reviews
Try posting your query in the support thread. Experts there may be able to assist you.
Good luck
Art Vanderlay
XDA Assist