Hi guys i'm very irritated to the problem i flashed alot of custom roms and used stock roms but its still coming back i dont know if its android bug i didint have this on lollipop, only marsmallow, but some times not always if a unlock my phone the screen is unresponsive only capacitive buttons working nothing more till i pull down the notification panel and than its working again anybody have this problem to?
Did you try reflash firmware via Smart Switch?
forumber2 said:
Did you try reflash firmware via Smart Switch?
Click to expand...
Click to collapse
yes several times but no luck for me on lolipop it was fine but with the marsmallow it freaked out
Related
Guys im using xt1033 i converted it to gpe 4.4.4 and tried updating it to 5.0.1 via otg sideload and i got stuck in Google unlocked logo and so that i flashed stock rom again.after that whenever i boot my phone or whenever im in recovery there is a line orginating from top and flows till the bottom continuously. This stops only when i turn off the screen after boot and turn it on. Then my phone works normally. I wanted to know that weather this is a problem due to flashing? Or due to hardware? Or something else ? Need solution for getting rid of this. I also wanted to know that weather i can flash roms with this problem ? Im scared that my phone will not work if i flash something with this problem. Guys please get me through this... Thanks in advance...
Be patient and there will soon be a permanent fix for this issue.:laugh:
Locking and then unlocking the screen may be the best solution till now.
solved
I flashed android 5.0.1 gpe again and the problem is gone now my phone works fine
Situation is kinda strange.
Yesterday i was bored and i started to flash some roms on my OPO. I started with the latest ColorOS that i found here on XDA, but i didn't like it. So i flashed PA 4.6 beta 6. I noticed that the red boot logo of colorOS remained despite the full wipe of the internal storage. And the fastboot mode started to show some chinese characters instead of the regular ones.
But that's not the problem. Problem is that this morning i wasn't able to turn off a call because the screen turns off every time a call is made and there's no chance to turn it again on. The only thing i could do is to long press the power button and reset the phone. The call starts, the speaker works, the screen turns on and you can't do nothing than this.
I said "ok, it could be the PA rom, it's in beta, y'know"...So i flashed the PA stable and...same problem.
Then i tried the first rom i saw (vanir lollipop, last build) and...same problem? WTF?
Now i'm flashing the original 44s by fastboot and see what happens. In case nothing happens with the fastboot way, i will try to flash it by recovery. But i have a bad feeling about this.
Any similar experiences? I will keep the thread updated for people with the same problem.
EDIT 1: ok, after the fastboot flash of the cm11 44s i'm able to make calls without those problems. It will be amazing if the problem were still there.
EDIT 2: i have to say that the chinese fastboot and the red logo are gone now.
The reason your proximity sensor stopped working was because of the modem you flashed while you flashed ColorOS.
I flashed ColorOS aswell and has the same proximity sensor issue after flashing back a CM11 rom.
mumaster20 said:
The reason your proximity sensor stopped working was because of the modem you flashed while you flashed ColorOS.
I flashed ColorOS aswell and has the same proximity sensor issue after flashing back a CM11 rom.
Click to expand...
Click to collapse
Damn! I knew it!
That terrible ROM messed up all my phone -_-
hi there! my opo shows me only a black screen, I've experienced this problem before and all it took to fix it was to keep power button pressed for about 20 secs for 3 or 4 times and then it normally boot, but this time it doesn't seem to work. (I've been using the latest cyanhacker with lollipop for a few days, don't know if it's involved somehow).
any suggestions?
Were you previously on a KitKat ROM? If so did you update your firmware and modem appropriately when moving to Lollipop?
Transmitted via Bacon
timmaaa said:
Were you previously on a KitKat ROM? If so did you update your firmware and modem appropriately when moving to Lollipop?
Transmitted via Bacon
Click to expand...
Click to collapse
I was on a kitkat ROM, I installed cyanhacker v3 via twrp recovery and it worked just fine for a week or so. Then I had a crash and, when booting up the phone, I couldn't see the 1+ logo. As i said, it's something I had experienced when I was on stock cm11s, and I could fix it just keeping power button pressed - 'though this time it didn't work (maybe due to the custom rom installed). So I tried the "colorOS method" as described here http://forum.xda-developers.com/one...nel-black-screen-fastboot-adb-t2835696/page14 , I can correctly flash it, but when I boot up I still see black with retroillumination. Last i tried to intall stock rom via http://forum.xda-developers.com/oneplus-one/development/oneplus-one-toolkit-manudroid19-gui-t2807418 , phone gets correctly identified and goes through the flash procedure, but then it stays black. what can i do?
Hey everyone, read this whole story of my note edge and then help me out with suggestions:
- 4 months ago i dropped it, it got a small straight line crack from left to right with no harm done with the touch, i used it everyday with no probs at all.
- Then 2 weeks ago, i flashed the XTREME MUSIC MOD BY ANDROIDEXPERT LIKE 2 TIMES, WHICH NEEDED A DALVIK WIPE, the apps optimization really took long which i think could be the reason for all this mess. I locked the screen, then i went on to unlock it, it never turned the screen on, it has since gone TOTAL BLACK OUT.
- Capacitive button lights and LED light is working, screen is also responding but i just can't see anything.
- i also did a soft reset ( That by removing battery and holding the power button for a minute or so), i turned the phone on but no luck.
====> HERE'S THE TWIST NOW, after 2 weeks of giving up, i tried again, i plugged the charger in and hurrey!, the screen turned on to show the charging animation, BUT, it went on to the boot screen when it shows samsung logo and AGAIN, it went total blackout.
what could be wrong?
no help?
ishaqtkr said:
no help?
Click to expand...
Click to collapse
Flash a stock rom. If youre on 5.0 find a 5.0 stock or if youre on 5.1 do a 5.1
If this does not solve your problem, i would suggest flashing stock rom with pit file (and selecting repartition option in odin)
zeeshanonlyme said:
Flash a stock rom. If youre on 5.0 find a 5.0 stock or if youre on 5.1 do a 5.1
If this does not solve your problem, i would suggest flashing stock rom with pit file (and selecting repartition option in odin)
Click to expand...
Click to collapse
What's a pit file and where can i get it please?
OK I, http://www.tsar3000.com/Joomla/inde...roid-mobile-phones&catid=55:samsung&Itemid=82
I got one from that site for N915F, flashed it with odin but still screen isn't showing anything
I have a rooted 5113 running Android 4.1.1. Haven't used it for a long time and have not installed a custom rom. Kernel number is 3.0.31-523998. Whenever the screen times out, the tab 2 turns off, and I have to hit the power button button and the volume button at the same time to restart it. Does anyone have any idea as to how, I can prevent the tab from turning off when the screen times out.
Also, my ultimate goal is to upgrade to KitKat so that I will have mirroring. If I install KItKat, is that likely to get rid of the shut off problem. Thanks for any help that can be provided. Should and that I have Titanium Pro.
decijp said:
I have a rooted 5113 running Android 4.1.1. Haven't used it for a long time and have not installed a custom rom. Kernel number is 3.0.31-523998. Whenever the screen times out, the tab 2 turns off, and I have to hit the power button button and the volume button at the same time to restart it. Does anyone have any idea as to how, I can prevent the tab from turning off when the screen times out.
Also, my ultimate goal is to upgrade to KitKat so that I will have mirroring. If I install KItKat, is that likely to get rid of the shut off problem. Thanks for any help that can be provided. Should and that I have Titanium Pro.
Click to expand...
Click to collapse
you should upgrade the tab to the latest stock jb rom 4.2.2, then try the custom rom, the tab has reached to marshmallow, you can try kitkat, LP and M. they are all pretty much stable than the stock. not every Rom supports mirroring.
Billysam,
Thanks for your reply. With the kludge of a system that I have, I decided to use factory reset. That solved the time out problem. Now, I will attempt to re-root it.