Hi folks,
I'm having trouble using my phone what so ever after an update. Not sure what exactly happened but the update failed and now I can barely use it.
Essentially what happens is I hit the screen/power button and the screen doesn't turn on. If I restart the phone 10ish times I get some use of the screen and the screen button is responsive for a few minutes. However it inevitably goes back into softbrick mode.
I contacted Huawei for a bootloader code (they didn't give it to me, I need to log in with my device on Huawei for 14 days and then I can get it... but this is impossible) but they came back with turn off your phone and hold power button and volume up to enter some eRecovery garbage. I tried it and the update got stuck at 5%. I left my phone on overnight to see if it would budge and nothing happened.
So essentially I need help getting the bootloader so I can try flashing on something else, or if anyone has any ideas on how to fix the issue. If people have a way to get the bootloader code without the 14 day delay I can PM them my SN/IMEI/and Product ID.
Thanks,
Arthur
Related
Looking for a quick fix here as I can't go to the service centre and get a replacement until at least Tuesday, and I need my phone working before then. I'm hoping someone else has had the same problem and can help me out.
My Moto G froze and became unresponsive (while I was refreshing my Gmail inbox) and it would not accept any input. I held down the power button and the power menu opened, however when I tried to power it off, it wouldn't accept my touch input. So obviously the next course of action was to hold down the power button for 10 seconds to force a reboot. The Motorola logo appeared and the phone vibrated... then it did nothing.
I tried this a few times and still nothing happened. I am able to boot into the bootloader, but apart from that, the phone goes only so far into the boot cycle before the screen goes black and does nothing.
Motorola's website suggests that if the Moto G becomes unresponsive, and the regular 10 second reset doesn't work, you should hold the power button for 120 seconds and keep it plugged in to a charger. This didn't work either. As of right now, my phone is just sitting here on my desk with what I would call a 'black screen of death.' Help would be appreciated.
I cannot boot into recovery, I cannot access anything. The phone is stock, unrooted, and running KitKat 4.4.2 without any modifications whatsoever. It's about 5 months old now, so it's still covered by warranty and I don't want to void it.
Narwhal73 said:
Looking for a quick fix here as I can't go to the service centre and get a replacement until at least Tuesday, and I need my phone working before then. I'm hoping someone else has had the same problem and can help me out.
My Moto G froze and became unresponsive (while I was refreshing my Gmail inbox) and it would not accept any input. I held down the power button and the power menu opened, however when I tried to power it off, it wouldn't accept my touch input. So obviously the next course of action was to hold down the power button for 10 seconds to force a reboot. The Motorola logo appeared and the phone vibrated... then it did nothing.
I tried this a few times and still nothing happened. I am able to boot into the bootloader, but apart from that, the phone goes only so far into the boot cycle before the screen goes black and does nothing.
Motorola's website suggests that if the Moto G becomes unresponsive, and the regular 10 second reset doesn't work, you should hold the power button for 120 seconds and keep it plugged in to a charger. This didn't work either. As of right now, my phone is just sitting here on my desk with what I would call a 'black screen of death.' Help would be appreciated.
I cannot boot into recovery, I cannot access anything. The phone is stock, unrooted, and running KitKat 4.4.2 without any modifications whatsoever. It's about 5 months old now, so it's still covered by warranty and I don't want to void it.
Click to expand...
Click to collapse
Can you boot into bootloader mode and use adb command from a pc? If yes, maybe you can try to flash a stock recovery img file via your pc to phone.
echui2014 said:
Can you boot into bootloader mode and use adb command from a pc? If yes, maybe you can try to flash a stock recovery img file via your pc to phone.
Click to expand...
Click to collapse
Would that require unlocking my boot loader though? I don't want to void my warranty, especially considering I did nothing to the phone and it's currently unresponsive.
I am not sure - but my guess is that bootloader needs to be unlocked to install custom recovery to "recover" & backup userdata before flashing the entire original stock firmware; that's usually the first step we see in all those modding guide in different forums online.
How to get into safe mode
www[dot]youtube[dot]com/watch?v=NSHzoSEx8xY
** I am unable to post outside url yet.**
I suppose you can also contact motorola support to see if they can help you recover your data before getting the phone fixed or replaced under their warranty program.
Hello,
I have/had a Nexus 5 (8gb) running CM 12 nightly. I was playing a game on it one morning, Racing RIvals to be specific, then a popup popped up on my screen saying Android System UI is not responding. I clicked OK then it locked my device and brought me back to the lockscreen. I unlocked the device with my passcode and it brought me back into the game but now phone was unresponsive. I held the power button down for some time hoping it would restart my device, upon doing this my device turned off and would not turn back on. I held the power button down for some time and then I felt vibrations but nothing appeared on the screen. I kept doing this and sometimes the screen would light up but will be blank and have nothing showing on the screen. I tried booting into fastboot but that was no hope. I think I have almost tried everything there is to do and nothing works. If I can get any help with my issue it will be much appreciated.
Thank You.
If you can't get it to boot, and can't get into fastboot, then it's likely you won't be able to fix it. Let it sit on the charger overnight, and if you still can't get into it, then you'll probably have to RMA it, unfortunately.
Bought a Nexus 5 about 6 months ago USED. It has been amazing. I got the latest OTA a week ago or so, not sure if that has anything to do with current issues.
About 2 days ago started randomly restarting. Today, it shut down and has been in continuous loop restarting. I see "Google" and maybe even the boot dots loading, then it is off. Three seconds later, starts again and repeats. Never makes it all the way into Android system. I let it sit for a while and when I pick it up, without touching any buttons, it repeats all of this. I suppose it is probably dead in general, but I don't know. Do you guys have any ideas? Again, I bought it used and from a ma/pap store who said they buy 100 in bulk, which made me skeptical, but they also had a 60 day guarantee and it was amazing the first 60 days and even after. It has been error free for 6 months, so I don't know if this is just a random issue or if the previous owner dropped it in a lake and I got lucky, or what. FWIW the damn thing has been in a case and never dropped, so it isn't anything that I have done I don't think. Thanks for any help.
edit: never rooted, never messed with, always been stock
Another user reported some instability since the last OTA update.
Flashing the full factory images did the trick.
a friend of mine gave me his nexus 5 to repair and its doing something similar. He had ir rooted and on latest 5.1.1 (i think). Either way, he said it was randomly locking up and rebooting. When i got it it had the red blinking light when plugged so i got a new battery. That got fixed but then the constant bootloop showed itself. I flashed TWRP (many versions, 2.6.3.1; 2.7.1.1; 2.8.7.1; the one that worked best was 2.7.1.1). So, once in twrp wiped, pushed cm 12 snapshot, flashed it, pushed gapps, falshed, pushe supersu flashed. Started the system. That precise order of things (ie: pushing flashing, then pushing something new and flashing it) was what gave me best results to actually boot up at least once. Once booted up and logging in and everything to cm i had some sort of stability (even rebooting and powering off) but i think that everything went wrong when i plugged the phone to the computer and it was back to bootloops and not even getting to the recovery. Flashed everything again. Didnt work. Had to leave the phone sit for a while (without the back casing) before trying again, in order, before getting any success. Im starting to think of ovrheating but it doesnt even get that hot...
Dunno if you guys have any ideas on this. Or if i can give you mor details to help us out.
Regards!
Looks like I'm having a similar problem to what is described here, as well as http://forum.xda-developers.com/google-nexus-5/help/bootlooped-dont-how-to-enable-debugging-t3215951
I've had one of my Nexus 5 phones running OmniROM 5.1.1 for some time now, very stably. After trying out the Marshmallow preview and going back to that ROM, I started having spontaneous hard reboots and hard crashes. The phone would often boot loop before even getting to the OmniROM boot animation. It was also very recalcitrant about entering and staying in the boot loader, rebooting spontaneously shortly after rendering the boot loader screen. I was occasionally able to "grab" control long enough to get it to boot into TWRP, from which a boot to Android seemed to usually get it out of the loop and into running Android.
I've flashed back the boot loader and baseband from factory-stock 5.1.1 LMY48M (HHZ12h and 2.0.50.2.26) using the flash-base.sh script from a freshly downloaded and extracted hammerhead-lmy48m. Things appeared to be OK last evening and this morning, but things got worse today.
Now the phone is in a state where it is not responsive to the power button when unplugged. I can hold it down for 30 seconds with no response.
If I plug in USB, it spontaneously starts rebooting, not showing more than about two seconds of the Google boot loader screen. If I hold the down-volume button, I can get the boot-loader screen, but no matter how fast I try to be, I can't select anything more than "Restart bootloader" (or "Power off") option before it spontaneously reboots (to boot loader).
As far as I know, the battery had a significant charge before this started happening.
I see the same behavior if the phone is connected to a USB charging source, rather than a USB port.
I've tried pulling the SIM, but that doesn't change the behavior.
adb wait-for-device never returns, so poking it over adb doesn't seem to be an option.
fastboot devices also doesn't see the phone, for the brief time the boot loader is running.
Any suggestions on how to get this into the boot loader so I can at least re-flash it?
Nexus 5 D820(E) 32 GB
Edit:
WaxLarry said:
In my opinion your problems seems power button's related.
Click to expand...
Click to collapse
Trying to see how I can "clean" or "clear" the power button now.
Edit:
Paul22000 said:
This morning my Nexus 5 was turned off all of a sudden after not having used it for 20-30 minutes. I held the power button and nothing. I plugged it into power and the "Google" screen appeared. It then went into a reboot loop on and off, on and off, on and off. I held the Volume Buttons and it went into fastboot, but then boot looped out again and again. Searching on Google yielded that this was indeed a common problem. [...]
Click to expand...
Click to collapse
Edit: Repeatedly pressing the power button seems to have temporarily allowed a boot to Android.
In retrospect, I had noticed over the last few days that the phone didn't seem to respond properly to the power button, either "ignoring" it, or when a second press got things started, it would unexpectedly come up with the long-press-volume menu.
One link on how to replace the power switch yourself is http://protyposis.net/blog/replacing-the-nexus-5-power-button/
Ok @jeffsf keep going on this thread. I had the same damn experience, that ended with RMA. LG said that the problem is related to some tension change in the power button. After the RMA I used the phone totally stock and never had a problem. Two months ago I switched to blu_spark kernel and some weeks after i noticed some problem. When I pressed the button to lock the screen, phone locked itself and then screen turned on, sometimes showing the shutdown option. So i understood that something was happening to the power button. I tried to overvolt with a +5mV on general offset and since then i never had problem. If you can enter recovery or bootloader i suggest you to flash some kernel with volt change support and then overvolt the general offset... and keep finger crossed
jeffsf said:
Looks like I'm having a similar problem to what is described here, as well as http://forum.xda-developers.com/google-nexus-5/help/bootlooped-dont-how-to-enable-debugging-t3215951
I've had one of my Nexus 5 phones running OmniROM 5.1.1 for some time now, very stably. After trying out the Marshmallow preview and going back to that ROM, I started having spontaneous hard reboots and hard crashes. The phone would often boot loop before even getting to the OmniROM boot animation. It was also very recalcitrant about entering and staying in the boot loader, rebooting spontaneously shortly after rendering the boot loader screen. I was occasionally able to "grab" control long enough to get it to boot into TWRP, from which a boot to Android seemed to usually get it out of the loop and into running Android.
I've flashed back the boot loader and baseband from factory-stock 5.1.1 LMY48M (HHZ12h and 2.0.50.2.26) using the flash-base.sh script from a freshly downloaded and extracted hammerhead-lmy48m. Things appeared to be OK last evening and this morning, but things got worse today.
Now the phone is in a state where it is not responsive to the power button when unplugged. I can hold it down for 30 seconds with no response.
If I plug in USB, it spontaneously starts rebooting, not showing more than about two seconds of the Google boot loader screen. If I hold the down-volume button, I can get the boot-loader screen, but no matter how fast I try to be, I can't select anything more than "Restart bootloader" (or "Power off") option before it spontaneously reboots (to boot loader).
As far as I know, the battery had a significant charge before this started happening.
I see the same behavior if the phone is connected to a USB charging source, rather than a USB port.
I've tried pulling the SIM, but that doesn't change the behavior.
adb wait-for-device never returns, so poking it over adb doesn't seem to be an option.
fastboot devices also doesn't see the phone, for the brief time the boot loader is running.
Any suggestions on how to get this into the boot loader so I can at least re-flash it?
Nexus 5 D820(E) 32 GB
Edit:
Trying to see how I can "clean" or "clear" the power button now.
Edit:
Edit: Repeatedly pressing the power button seems to have temporarily allowed a boot to Android.
In retrospect, I had noticed over the last few days that the phone didn't seem to respond properly to the power button, either "ignoring" it, or when a second press got things started, it would unexpectedly come up with the long-press-volume menu.
One link on how to replace the power switch yourself is http://protyposis.net/blog/replacing-the-nexus-5-power-button/
Click to expand...
Click to collapse
I got a notification for this post since you quoted me. I'm not sure if you're having the same problem but I'll tell you what happened to me, just in case. I called T-Mobile and they referred me to the nearest 3rd party phone repair shop. I went there and after an evaluation, the repairman told me the power button on my phone was indeed broken. They replaced it for $55.
The story doesn't end there though. I took my phone home and a few hours later I tried to use bluetooth and it didn't work. I took it back and found out that unfortunately, when the guy replaced the power button, he inadvertently broke the bluetooth. There's no way to fix bluetooth without replacing the motherboard entirely, which would cost $200. I'd rather buy a new phone at that point since my Nexus 5 was getting old. He refunded me, which was nice. At least the power button worked so I could use my phone. Bluetooth isn't as valuable as being able to you know, turn on the phone, so at least it was a net gain.
After that, I purchased a Nexus 6 and rooted it so I could use double-tap-to-wake (along with the automatic screen on when you pick up the Nexus 6). I also use the following app in order to turn off the screen by swiping up from the home button (I don't care about losing the shortcut to Google Now): Screen Off and Lock
I can now literally go weeks without using the power button on my Nexus 6. (I literally only use it when tap to wake sometimes becomes unresponsive which is rare.)
Bottom line: I will never buy another phone without tap to wake functionality! :good:
A local repair shop here indicated that one sometimes does changing the power switch resolve the issue. They have seen situations where the issue appears to be one of the power-management ICs. Just something to be aware of when examining the potential cost of a repair and who you would have do the work.
Hi everyone, I'm desperately trying to fix this, I have no idea what is going on so suddenly.
This morning, the phone just suddenly crashed. After booting, it does nothing, gets stuck on the Google logo page forever. Sometimes it doesn't even react when power button is pressed. On occasion, I can get it into Fastboot screen, but anything I press there gives me a black screen. Sometimes it'll go past the Google logo, but give me Mr Android guy lying down with a red !.
I attempted to use the toolkit to flash the 6.0, doesn't work, fails throughout (remote: flash write failure). Tried flashing bootloader, recovery, nothing. These are the errors that are displayed . Every time it says <waiting for device> nothing happens. If I manually press power+vol down, it goes back to fastboot, continues, fails.
Anything else I can do? I don't want to lose anything, but if it means that I can use the phone again, I don't care. I've been having a **** ton of problems lately, including no Wifi and bluetooth, both don't work. Betting its hardware issue, but who knows. Running Nexus 5, 5.1.1 before crash, all stock, no root, no unlock.
When I press buttons, I can hear my computer making the sounds of device connect/disconnect, but right now, nothing even reacts on the phone. Absolutely zip.
I'll be on and off the computer for the next while, but I desperately need some help. Thanks everyone
First off, my google pixel is 100% stock. Last night when I went to bed, I had no issues with my phone. I woke up in the middle of the night because the screen was on and very bright. It was the white google boot screen, but with a bunch of corrupted text sporadically over it, and it was stuck there. I held down the power button to reboot, but when it did it would get to my unlock screen, but be frozen there. After about 5 seconds on that screen, it would reboot itself, and just continue that over and over. I tried holding down the volume down button to get into the bootloader, but when I go into recover mode, it just gives me the logo of the green android guy with a red triangle exclamation point on it and it says "no command" below it. So I reboot, and the only way to stop the boot cycle is to to back into the boot loader and select shutdown, so that way it will stay off.
Any words of wisdom? I was really not looking to get a new phone at this point...
I'll add that I used the instructions here to try to apply a rescue OTA using ADB according to these instructions: https://drive.google.com/file/d/0Bz6x7k-VkpUJMlZ1aEliVnhMOHM/view. It completed successfully, but didn't make any improvement on the situation.
Update #2: I ended up trying to do a factory reset from recovery mode and that also doesn't seem to have helped.
Did you try installing a more recent OTA than what you originally had?
I already had the most recent OTA so I can't get a more recent one.
Try again in a few days when the February update is released. If it still doesn't work, it's possible a memory chip got fried.
If you're in the US, look up your nearest uBreakiFix location. They handle all Pixel warranties in the US. There are a number of reports in various threads of people getting their phone repaired for free, even outside of warranty.
I am in the US, but the nearest location for me is about 1.5 hours away. I guess I could give them a call to find out if it's worth the drive.
Why do you think a new OTA update would help where an old one wouldn't?
Is there any way I can flash the full image without having previously unlocked the bootloader?
Well i am experiencing the same problem on temporary basis since 2-3 days and the problem seems to be with the power button. I get it fix when i take it out of the body cover and try to clear the dust around power button and seems to fix it but it still happens in the morning or at night at home.