Database Info

[Q&A] [ROM] [5.1.1] [SaberMod] [Build 8] [21/04/2015] Optimized CyanogenMod 12.1

Q&A for [ROM] [5.1.1] [SaberMod] [Build 8] [21/04/2015] Optimized CyanogenMod 12.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.1.1] [SaberMod] [Build 8] [21/04/2015] Optimized CyanogenMod 12.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

beeeto said:
Hello guys,
After flashing builds every 4 hours every day and countless hours of testing I have finally made a build I'm totally satisfied with, battery life is completely normal this time and I am proud to tell you this project continues. I am building Build 8 featuring Android 5.1.1 right now and it should be ready in about a hour. Thanks all of users who sent me PMs supporting this project.
Now lets go to business, here's the changelog.
Link: -Coming-
That's all, there's still some work to do with optimization flags and I will work it out on the following days.
Hope you guys enjoy it, kind regards to all.
Click to expand...
Click to collapse
Where's the link? I really want to download! This is the best LP ROM so far (better than CM even).

Build 8 bug
After build 8, I noticed something I´d seen before on CM12: a ripple from bottom to the top, and occasional distortions of the screen. It only happens at startup though, and dissappears after a couple of minutes of using the phone. Then it'll be gone untill the next reboot.

Works Xposed in the Build 8 of thread: [Q&A] [ROM] [5.1.1] [SaberMod] ?
Hi @beeto your ROM is great, thanks!!!
Works xposed in the Build 8?

Faux Intelliplug
I don't seems to see Faux Intelliplug in Kernel Adiutor, there is only Mp Decision in the CPU hotplug section.

Great work !
It's the best ROM that i've tried, thank you for your huge work
There is just a small bug on the 8.1 (not present on the 7.1), during the boot and after the boot, there is like a wave which cross the screen from bottom to top, but when il lock and unlock the phone, the bug stop (I don't know if i'm very clear). It's not too disturbing, but it's one of some small bug of the ROM. There was the same bug on CM 12 official.

After the thread has been closed I checked the thread almost daily and didn´t expect to see updated builds anymore. I was close to switch to another ROM, but I am glad to see you back
I simply want to say thanks for all your effort and hard work, this ROM is really outstanding

Azertyontione said:
Great work !
It's the best ROM that i've tried, thank you for your huge work
There is just a small bug on the 8.1 (not present on the 7.1), during the boot and after the boot, there is like a wave which cross the screen from bottom to top, but when il lock and unlock the phone, the bug stop (I don't know if i'm very clear). It's not too disturbing, but it's one of some small bug of the ROM. There was the same bug on CM 12 official.
Click to expand...
Click to collapse
It's my understanding that the bootloader for out device is not compatible with Lollipop and causes this effect. But once our device gets the official OTA that bug will be fixed.

Where is the intelliplug hotplug? I cant enable it in build 8 after doing a clean install.

revodark said:
Hi @beeto your ROM is great, thanks!!!
Works xposed in the Build 8?
Click to expand...
Click to collapse
Yes, the superalpha works! Just have a backup ready as not all plugins from work on 5.1.1

julien329 said:
I don't seems to see Faux Intelliplug in Kernel Adiutor, there is only Mp Decision in the CPU hotplug section.
Click to expand...
Click to collapse
in build 9 Faux Intelliplug is available
---------- Post added at 09:48 PM ---------- Previous post was at 09:45 PM ----------
Xornop said:
Where is the intelliplug hotplug? I cant enable it in build 8 after doing a clean install.
Click to expand...
Click to collapse
In the Build 9 intelliplug is available

Can i do a dirty flash from cm 12.1-20150424-NIGHTLY? I always wipe just system/install the rom and Gapps 5.1 and then wipe cache/dalvik cache... Is that okay? Thanks for continue doing this amazing ROM. I changed to the official cm 12.1 ROM for a while and now i wanna come back to this ROM

cpthornman said:
It's my understanding that the bootloader for out device is not compatible with Lollipop and causes this effect. But once our device gets the official OTA that bug will be fixed.
Click to expand...
Click to collapse
Ok, thank you for your answer

Hey guys, I recently flashed build 8.1 and I'm loving it! Now build 9 is out and I wanna keep updated... My question is, what will I need to do? Flash build 9, wipe cache and reflash gapps? Just tell me please I wanna avoid having to wipe everything and I'm pretty sure a clean flash might not be necessary... Thanks you!

I have been waiting forever for Motorola to push 5.X to pegerine. Yesterday I pulled the trigger and got your ROM working. Finally got Lollipop!
So far I love this ROM. But there is one thing I have been missing from my previous build: Double tap to wake. Is this something you will implement in a later build or should I just go on and flash another kernel with this support? I've had double tap to wake on my Kitkat for quite a while now, so it's really annoying being without it.
Anyways, thanks for a great ROM!
---------- Post added at 05:47 PM ---------- Previous post was at 05:42 PM ----------
Costandre said:
Hey guys, I recently flashed build 8.1 and I'm loving it! Now build 9 is out and I wanna keep updated... My question is, what will I need to do? Flash build 9, wipe cache and reflash gapps? Just tell me please I wanna avoid having to wipe everything and I'm pretty sure a clean flash might not be necessary... Thanks you!
Click to expand...
Click to collapse
I just flashed build 9 this second! Just flash the new build, wipe dalvik and cache (NOT full wipe or system) and reboot. Then you have your phone as before but we the new build

Beeto
First of all thanks to Beeto for all the hard work and all the other members of xda.
The rom works like a charm and its really fast, but i have a small question for you all. Is it only me or are launcher redraws still present? because sometimes when i listen to music and surf the web (at the same time) using google chrome the music app closes (google play music) and when i tap the home button i get a redraw. Again its a rare occurrence, but happens sometimes, just wanted to know if its the same for you all. Thanks

Hello,
I use this ROM for a couple of weeks - really amazing!
But one problem I have: I get no GPS signal, for example when i use Locus i get no satellite.
Is this problem known?!

Thank you very much @beeeto ! I saw it on the lp-test branch but as I couldn't wait, I built myself a nice kernel forked from your repo ! Thanks for your work !

que maravilla de Rom......
[B[/B]
Se lo escribo en estos términos, después de 4 intentos fallidos de instalación de su Rom por tener siempre perdida del acceso de Super Usuario no pude instalarla y termino volviendo a stock. Créame que la verdad la pondré en mi lista de Roms a no instalar. Por que siguiendo todos los pasos al dedillo que usted indica se me va el acceso Root y termino de nuevo volviendo a Stock

Is it compatible with xt1033??

CM14.1 is now live for cancro

Guys, the CM14.1 build is now available for download from the CM team.
Get it here, now.
-- Source
Check above page for list of all devices with CM14/Cm14.1/7.0 ROMs. Have fun!

Any major bug(s) found on cancro for this build so far?

I'm on cm14.1 (official) in my mi4.....proximity sensor is not working....and vibration intensity option Is also not there.....fast charging is not working at all.....

chiwawa10 said:
Any major bug(s) found on cancro for this build so far?
Click to expand...
Click to collapse
CM14.1 fo xiaomi mi4 lte-ct bug the proximity sensor,
speaker sounds with wheezing, audio fx It does not react to changes...this is ****ty cm for mi4

yuriylink said:
CM14.1 fo xiaomi mi4 lte-ct bug the proximity sensor,
speaker sounds with wheezing, audio fx It does not react to changes...this is ****ty cm for mi4
Click to expand...
Click to collapse
???*???

Let's be easy on the Dev, as this is the initial stage of CM14.1 for Cancro.
So far I have faced issue with 'Auto-Rotate' feature, only. Would wait for a more stable build, later next week.
Cheers,
Sarat

Testing and last update works fine (20161115)
Enviat des del meu MI PAD usant Tapatalk

when flashing 20161220 nightly from 20161213, it says
failed to mount system: no such volume
e1001: failed to update system image.
the system partition is just untouched and i cannot upgrade to this version, how can i do now. anyone please help

Pokémon Go compatible?
Any idea if this is Pokémon Go compatible*? I tried the OASP Nougat build before without any luck, even fully unrooting the device didn't do the trick.
*Pokémon Go uses the safetynet framework which doesn't work with rooted devices.

Axeia said:
Any idea if this is Pokémon Go compatible*? I tried the OASP Nougat build before without any luck, even fully unrooting the device didn't do the trick.
*Pokémon Go uses the safetynet framework which doesn't work with rooted devices.
Click to expand...
Click to collapse
It does work, but not out of the box. This seems to have to worked for me:
Go settings -> about phone
Tap the build number 7 times to enable Developer Settings
Go to settings -> Developer options
Scroll down to Root access and set it to Apps
Install SuperSU and grant it root access
Go to settings in supersu and click the Full unroot option
Reboot phone
Go to settings -> Developer options -> Root Access and disable it
And that should be it I think.

[ROM][5.1.1][wiko pulp 4g]wiko pulp literom for pulp 4g

Hi guys, i can't find any ROM for this device so i've made one
I'm not responsible for soft/hard brick or bootloops.
Features:
-Deodexed, zipaligned and tweaked build.prop for better performance
-Removed unuseful google apps and bloatwares
-New Cyanogen Inc boot animation
Downloads (All downloads are from Mega.nz)
Recovery: [url]https://goo.gl/dzumMo[/URL]
SHA1: FA80F6E3EA71B5F4F06C42FFF3D5BD2DEC093D8F
MD5: 9D8AA5F0D24288F34B8770CF67BEC9FC
ROM: https://goo.gl/Yyv42b
SHA1: C882CA7E4BC1ED9B7187381E1FBF5B5004D194A5
MD5: 800CA38B7CCA401EC6886B2B47D5CDA4
REMEMBER TO WIPE DATA,CACHE AND DALVIK CACHE BEFORE AND AFTER INSTALLATION!
Credits:
-Me for making the ROM
-dsixda for his kitchen
-chuppito for the TWRP

Interesting, I need to test this ^^
What have you tweak in build.prop?

Leeo97one said:
Interesting, I need to test this ^^
What have you tweak in build.prop?
Click to expand...
Click to collapse
I added the 270° rotation and i added some strings for better performance without battry impact

What do you mean by 270° rotation?

Leeo97one said:
What do you mean by 270° rotation?
Click to expand...
Click to collapse
You can rotate your phone by 180°, if you hold the phone with the "wiko" symbol at bottom

So why calling this 270°

Leeo97one said:
So why calling this 270°
Click to expand...
Click to collapse
Dunno, i've read a guide that says 270°

What bootloader do you have linked? (TWRP from the thanks, but what version?)
Did you test this rom? It won't even pass primary validation for flashing in TWRP.

Is it working for Pulp Fab too?

Hello Matteo and thank you for this work. I am waiting for a ROM since a long time.
I have some questions before trying to install it:
- After some months of use, is it still working well on your Wiko ?
- Which is the version of the ROM ? I was not sure to understand (Android 5, Cyanogen, lineageOS)
Thanks by advance

Dov'è la Rom?
Ciao Matteo,
Sono Stefano da Firenze e vorrei provare la literom che hai proposto ma....
al collegamento da te inserito non c'è più nulla. Puoi aiutarmi?
Grazie

Interesting ...
I would love to get a custom ROM on my Wiko. Could you give me some information on how you built this?
EDIT: Nevermind, This looks like a mod of stock ROM(?)

Hello... I've a wiko pulp 4g...with custom recovery but my child wiped system...
My custom recovery is again inside...
can I flash this ROM?
If yes, where can I find it because link seems to be dead...
Thank's for help...

neod123 said:
Hello Matteo and thank you for this work. I am waiting for a ROM since a long time.
I have some questions before trying to install it:
- After some months of use, is it still working well on your Wiko ?
- Which is the version of the ROM ? I was not sure to understand (Android 5, Cyanogen, lineageOS)
Thanks by advance
Click to expand...
Click to collapse
It's android lollipop 5.1 and yes, it's working well. Now i'm trying to build MIUI for this device

Hello Matteo,
I wrote to you 9 months ago and I have not received a reply.
So I would like to know where to find the ROM you've cooked since the link to MEGA is inactive.
Congratulations for the job and thanks.

Stefano58 said:
Hello Matteo,
I wrote to you 9 months ago and I have not received a reply.
So I would like to know where to find the ROM you've cooked since the link to MEGA is inactive.
Congratulations for the job and thanks.
Click to expand...
Click to collapse
Thanks for reporting the dead link. I'm re-uploading the ROM but it takes time since I have a crappy WiFi

Matteo Gamba said:
Thanks for reporting the dead link. I'm re-uploading the ROM but it takes time since I have a crappy WiFi
Click to expand...
Click to collapse
Please, re-upload the link))

Link
Can you please re-upload the link

Miui8 [untested by me]

As you can see HERE somebody at Miui Brazil have already provided to build MIUI8 for our device but the Moto X Play is my primary device so I won't test it. If somebody have time well... You're welcome! A least 2 thing:
1) I don't assume any responsibily for broken devices.
2) The build isn't make or tested by me so I don't know what work and what not.
So happy flashing buddies!
For more informations please subscribe on the G+ community HERE (It is in español).
If you want you can thank THAT POST.
You can watch HERE too and download the ROM HERE.
Technical informations: The ROM is at V8 7.1.21 released with march security patch and based on Android 6.0.1

I am getting zip file corrupt message while trying to flash the rom.Downloaded the rom thrice,7zip and winrar showed no errors.Currently on twrp 3.1.0-r1.

error 7 on installation b1 and b2 versions.

The answer is: yair estas provando una version viejita aguarda y te confirmo cuando puedas testear. Saludos (He will let we know when he'll release a new version).

Updated link with latest build! You can find it HERE!

I remember the work isn't made by me! I don't assume any responsibily for your briked devices!

Someone is trying to port the MIUI 8 from another device to our lux.. in the wrong way.
Taking victara's MIUI 8 and editing build.prop and updater-script won't work, dude. lol

Mi4i has got same internals as our device and therefore, porting should be done between them. I had tried it once but couldn't complete it.
Sent from my Moto X Play using Tapatalk

[ROM][OFFICIAL][9.0] Dot OS P v3.0 for Hi6250

Guys i would like to share with you another work of art by our developers. Again it is not my work! but i would like you to experience this ROM. if you have any question please follow the official forum from the original thread of P8 lite (2017), but since hi6250 architecture it is work also for mate 10 lite.
Note: it is for EMUI 8 vendor
DOT OS ROM link
if you want also to try AEX ROM. link down below.
AEX ROM link
If you have a problem flashing this ROM on twrp please use twrp link below.
TWRP link

Have you tried this rom on mate 10 lite?

I think not. Most Android 9 Roms are for Emui9 Vendor or are not flashable cause Error Codes in TWRP. Only Openkirin OmniPie works mostly bugfree for our Mate.10 lite.

Please take a couple of screenshots of the Mate 10 lite with this system installed. If possible, tell us if you encounter any bugs, especially with the camera, calling or battery.
I know most of us would appreciate it.

Hi.
Both roms working on Mate 10 lite, i was using them for last week. Camera, calling quality and allmost everything working nicely. Battery is also nice.?
Ps(There r AOSP camera, not Huawei).
I found only one issue , connecting with tv (not via youtube, but directly from qs) cousing soft restart.
Sorry for my english ?

1234newbie said:
Hi.
Both roms working on Mate 10 lite, i was using them for last week. Camera, calling quality and allmost everything working nicely. Battery is also nice.?
Ps(There r AOSP camera, not Huawei).
I found only one issue , connecting with tv (not via youtube, but directly from qs) cousing soft restart.
Sorry for my english ?
Click to expand...
Click to collapse
On the stock oreo rom I am not able to connect for mirror share with samsung smart tv. Maybe it is phone not rom issue.

rony.shawkat said:
Have you tried this rom on mate 10 lite?
Click to expand...
Click to collapse
yes i tried to flash it on my mate 10 lite it works.

Tsun_Pooka said:
Please take a couple of screenshots of the Mate 10 lite with this system installed. If possible, tell us if you encounter any bugs, especially with the camera, calling or battery.
I know most of us would appreciate it.
Click to expand...
Click to collapse
I forgot to screenshot sir.

Copkiller2010 said:
I think not. Most Android 9 Roms are for Emui9 Vendor or are not flashable cause Error Codes in TWRP. Only Openkirin OmniPie works mostly bugfree for our Mate.10 lite.
Click to expand...
Click to collapse
it is for emui 8 vendor and it works.

liviuionut22 said:
On the stock oreo rom I am not able to connect for mirror share with samsung smart tv. Maybe it is phone not rom issue.
Click to expand...
Click to collapse
On stock Oreo i was able to connect with LG web.os without any issues, which i had on any custom rom ?

liviuionut22 said:
On the stock oreo rom I am not able to connect for mirror share with samsung smart tv. Maybe it is phone not rom issue.
Click to expand...
Click to collapse
It works fine for me. Try checking your connection? Though I think you probably already tried that.

Tsun_Pooka said:
It works fine for me. Try checking your connection? Though I think you probably already tried that.
Click to expand...
Click to collapse
I tried all possibile setings

I tested now this Rom. First flash with TWRP and full wipe with Stock Recovery but the Dot-OS its really extreme slow (Video and Games). Any Ideas why ? I am back to Stock for now.

I only got one question for this rom, does the microphone recording on Instagram / messenger / recorder work?

This Rom wont boot on my Mate 10 lite
any idea ???

hasni2005 said:
This Rom wont boot on my Mate 10 lite
any idea ???
Click to expand...
Click to collapse
test avec une version emui 8.0 antérieur exemple b338. elle boot
test with version emui 8.0 previous example b338. she boot

Chisetdel31260 said:
test avec une version emui 8.0 antérieur exemple b338. elle boot
test with version emui 8.0 previous example b338. she boot
Click to expand...
Click to collapse
Merci bcp pour votre réponse
pouvez vous me donner un lien vers une version EMUI 8 - B338, j'ai cherhé sur google mais j'ai pas trouvé
Thanks a lot for your answer
Can you provide me a link for an EMUI8 - B338 version please

hasni2005 said:
Merci bcp pour votre réponse
pouvez vous me donner un lien vers une version EMUI 8 - B338, j'ai cherhé sur google mais j'ai pas trouvé
Thanks a lot for your answer
Can you provide me a link for an EMUI8 - B338 version please
Click to expand...
Click to collapse
here is https://pro-teammt.ru/en/online-firmware-database/?firmware_model=rne-l21&firmware_page=0
* just take the version of your area.
** enter the search bar rne-l21c ??? b ???
then go on filelist, a window appears. get your three .zip

Hi guys, I have a mate 10 lite RNE-L21C432 running version 8.0.0.342 and using askuccio twrp, bootloader unlocked, FRP unlocked.
I tried to install the dot os by following these steps: format data, reboot, wipe data,cache,delvik,system, reboot, flash rom, reboot to system and i get stuck booting and it says "your device is now booting". I also tried doing the same thing but before rebooting to system, flash stock recovery and factory reset and then boot to system and I get the same results. I have also tried using another TWRP and the same happens. Can someone give me some help?

crassus96 said:
Hi guys, I have a mate 10 lite RNE-L21C432 running version 8.0.0.342 and using askuccio twrp, bootloader unlocked, FRP unlocked.
I tried to install the dot os by following these steps: format data, reboot, wipe data,cache,delvik,system, reboot, flash rom, reboot to system and i get stuck booting and it says "your device is now booting". I also tried doing the same thing but before rebooting to system, flash stock recovery and factory reset and then boot to system and I get the same results. I have also tried using another TWRP and the same happens. Can someone give me some help?
Click to expand...
Click to collapse
Use rne-l21c432b338. + recovery Stock. ?