Q&A for [ROM] [5.1.1] [SaberMod] [Build 8] [21/04/2015] Optimized CyanogenMod 12.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.1.1] [SaberMod] [Build 8] [21/04/2015] Optimized CyanogenMod 12.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
beeeto said:
Hello guys,
After flashing builds every 4 hours every day and countless hours of testing I have finally made a build I'm totally satisfied with, battery life is completely normal this time and I am proud to tell you this project continues. I am building Build 8 featuring Android 5.1.1 right now and it should be ready in about a hour. Thanks all of users who sent me PMs supporting this project.
Now lets go to business, here's the changelog.
Link: -Coming-
That's all, there's still some work to do with optimization flags and I will work it out on the following days.
Hope you guys enjoy it, kind regards to all.
Click to expand...
Click to collapse
Where's the link? I really want to download! This is the best LP ROM so far (better than CM even).
Build 8 bug
After build 8, I noticed something I´d seen before on CM12: a ripple from bottom to the top, and occasional distortions of the screen. It only happens at startup though, and dissappears after a couple of minutes of using the phone. Then it'll be gone untill the next reboot.
Works Xposed in the Build 8 of thread: [Q&A] [ROM] [5.1.1] [SaberMod] ?
Hi @beeto your ROM is great, thanks!!!
Works xposed in the Build 8?
Faux Intelliplug
I don't seems to see Faux Intelliplug in Kernel Adiutor, there is only Mp Decision in the CPU hotplug section.
Great work !
It's the best ROM that i've tried, thank you for your huge work
There is just a small bug on the 8.1 (not present on the 7.1), during the boot and after the boot, there is like a wave which cross the screen from bottom to top, but when il lock and unlock the phone, the bug stop (I don't know if i'm very clear). It's not too disturbing, but it's one of some small bug of the ROM. There was the same bug on CM 12 official.
After the thread has been closed I checked the thread almost daily and didn´t expect to see updated builds anymore. I was close to switch to another ROM, but I am glad to see you back
I simply want to say thanks for all your effort and hard work, this ROM is really outstanding
Azertyontione said:
Great work !
It's the best ROM that i've tried, thank you for your huge work
There is just a small bug on the 8.1 (not present on the 7.1), during the boot and after the boot, there is like a wave which cross the screen from bottom to top, but when il lock and unlock the phone, the bug stop (I don't know if i'm very clear). It's not too disturbing, but it's one of some small bug of the ROM. There was the same bug on CM 12 official.
Click to expand...
Click to collapse
It's my understanding that the bootloader for out device is not compatible with Lollipop and causes this effect. But once our device gets the official OTA that bug will be fixed.
Where is the intelliplug hotplug? I cant enable it in build 8 after doing a clean install.
revodark said:
Hi @beeto your ROM is great, thanks!!!
Works xposed in the Build 8?
Click to expand...
Click to collapse
Yes, the superalpha works! Just have a backup ready as not all plugins from work on 5.1.1
julien329 said:
I don't seems to see Faux Intelliplug in Kernel Adiutor, there is only Mp Decision in the CPU hotplug section.
Click to expand...
Click to collapse
in build 9 Faux Intelliplug is available
---------- Post added at 09:48 PM ---------- Previous post was at 09:45 PM ----------
Xornop said:
Where is the intelliplug hotplug? I cant enable it in build 8 after doing a clean install.
Click to expand...
Click to collapse
In the Build 9 intelliplug is available
Can i do a dirty flash from cm 12.1-20150424-NIGHTLY? I always wipe just system/install the rom and Gapps 5.1 and then wipe cache/dalvik cache... Is that okay? Thanks for continue doing this amazing ROM. I changed to the official cm 12.1 ROM for a while and now i wanna come back to this ROM
cpthornman said:
It's my understanding that the bootloader for out device is not compatible with Lollipop and causes this effect. But once our device gets the official OTA that bug will be fixed.
Click to expand...
Click to collapse
Ok, thank you for your answer
Hey guys, I recently flashed build 8.1 and I'm loving it! Now build 9 is out and I wanna keep updated... My question is, what will I need to do? Flash build 9, wipe cache and reflash gapps? Just tell me please I wanna avoid having to wipe everything and I'm pretty sure a clean flash might not be necessary... Thanks you!
I have been waiting forever for Motorola to push 5.X to pegerine. Yesterday I pulled the trigger and got your ROM working. Finally got Lollipop!
So far I love this ROM. But there is one thing I have been missing from my previous build: Double tap to wake. Is this something you will implement in a later build or should I just go on and flash another kernel with this support? I've had double tap to wake on my Kitkat for quite a while now, so it's really annoying being without it.
Anyways, thanks for a great ROM!
---------- Post added at 05:47 PM ---------- Previous post was at 05:42 PM ----------
Costandre said:
Hey guys, I recently flashed build 8.1 and I'm loving it! Now build 9 is out and I wanna keep updated... My question is, what will I need to do? Flash build 9, wipe cache and reflash gapps? Just tell me please I wanna avoid having to wipe everything and I'm pretty sure a clean flash might not be necessary... Thanks you!
Click to expand...
Click to collapse
I just flashed build 9 this second! Just flash the new build, wipe dalvik and cache (NOT full wipe or system) and reboot. Then you have your phone as before but we the new build
Beeto
First of all thanks to Beeto for all the hard work and all the other members of xda.
The rom works like a charm and its really fast, but i have a small question for you all. Is it only me or are launcher redraws still present? because sometimes when i listen to music and surf the web (at the same time) using google chrome the music app closes (google play music) and when i tap the home button i get a redraw. Again its a rare occurrence, but happens sometimes, just wanted to know if its the same for you all. Thanks
Hello,
I use this ROM for a couple of weeks - really amazing!
But one problem I have: I get no GPS signal, for example when i use Locus i get no satellite.
Is this problem known?!
Thank you very much @beeeto ! I saw it on the lp-test branch but as I couldn't wait, I built myself a nice kernel forked from your repo ! Thanks for your work !
que maravilla de Rom......
[B[/B]
Se lo escribo en estos términos, después de 4 intentos fallidos de instalación de su Rom por tener siempre perdida del acceso de Super Usuario no pude instalarla y termino volviendo a stock. Créame que la verdad la pondré en mi lista de Roms a no instalar. Por que siguiendo todos los pasos al dedillo que usted indica se me va el acceso Root y termino de nuevo volviendo a Stock
Is it compatible with xt1033??
Related
Q&A for Blitz Rom v6 by r0i [Base Nameless - EXT4 o Full F2FS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Blitz Rom v6 by r0i [Base Nameless - EXT4 o Full F2FS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
blitz rom
Hi,
There's an issue i'm having on v6 where you can't import any sim contacts as not are found even though you have contacts stored on your sim card, noticed a lot of cm11 based roms have this issue too!
Thanks great rom
I'm having an issue with the DPI settings not taking anybody having the same issue
Settings -> Security -> Advanced reboot
I love this ROM. And I've tried them all! So smooth it's crazy. Keep it up.
Hi, thank you for ROM. I have 1 issue - not work heads-up notifications( It is possible to fix?
probando la rom,probando lolipop,espero que me guste,funcione bien,y vaya bien de bateria,para no tener que volver a kk,ademas veo que incluye el audioFx, asique de lujo,gran trabajo! gracias!
I have the blitz ROM v13 on oneplus one and deep sleep isn't working... How can i fix this?
Best Rom
Can u please add theme engine in the next build....and fix xposed installer allways upgrading when startup. Thx
Issues installing Blitz Rom
I'm having issues installing Blitz Rom.
1. I installed the zip
2. Booted into recovery
3. Factory wiped my phone
4. Installed the ZIP
5. Rebooted
After reboot, my phone displays the Dark Side Team logo and the wings are moving, but then after a while the wings stop moving and it does nothing. It never goes past the DST logo.
My phone gets really hot during the process.
Can you help me out? I'd really like to use this rom but this installation issue is in the way.
Please delete this post
Q&A for [ROM] [p3110] [5.0.2] [jan21] [CM12-based] [official] **crDroid**
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [p3110] [5.0.2] [jan21] [CM12-based] [official] **crDroid**. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
So many features thnx for the great rom .
Can't move apps to SD card, internal OR external...
Is there a fix? This is a slick rom and I would like to keep using it but without this feature, I really can't.
If I try to move it with an app, I get back, "install_failed_container_error" and if I do it from the app info screen, I get, "Couldn't move app. Not enough storage space." I still have a couple gigs free on the internal storage, and twelve gigs free on my external card, and both show up in the filesystem just fine and dandy... any ideas on a fix? Cause without this, my tablet is pretty useless and I might as well go back to kitkat where I could use at least the internal SD storage...
Thanks in advance,
- Drake.
Updates
No more builds?
Updates
No more builds?
Camera not working
Unfortunately, Camera has stopped.
GT-P3110
crDroid version: crDroid-5.0.2-20150203-p3110
Kernel: 30.31-CM-g4d456f6
Buind number: LRX22G
had PhillZ Touch and CM11.
Updated PhillZ Touch with this (philz_touch_6.57.8-p3110.zip, i had some old version, but i dont remember the name), and made a factory reset, then i installed crdroid-5.0.2-20150204-p3110.zip
After installing, i rebooted to recovery and installed pa gapps nano (pa_gapps-modular-nano-5.0.1-RC3-20150201-signed.zip), and booted to android.
Immediately after booting i started the camera app, but it crashed, i did restart the tablet just to be sure, gone to google play too see if something had to be updated, but none. Tried again the camera but still crashes.
What to dooo T_T??????
Edit: also happens when using other camera apps, tried Google Camera (com.google.android.GoogleCamera v2.4.025(1636091-30)) and HD Camera ULTRA (com.jessdev.hdcameras v2.2.2), the last saying "Cannot connect to camera"
Not able to use Google Services
I have downloaded the latest ROM but after installation it says Google Play service has stopped working and i am no able to log in with my google account.
Please Help
Bootloop in feb 14 build.. Stuck in crDroid logo
Can't update!
I did update the rom, but the device don't turn on... it stays on the "crDroid" screen. Help me!
newest build bootloops
p3113 here, newest build bootloops, last build won't flash. Trying Feb 4 build now because this looks promising. TWRP should work for flashing right?
Haanrii said:
Bootloop in feb 14 build.. Stuck in crDroid logo
Click to expand...
Click to collapse
Me to back on the earlier version
i got the bootloop too
bug
after flashing new rom 14 feb booting stucks at crDroid logo
any solution
De nieuwe Rom
Zit met smart uit te kijken naar de nieuwe rom , die niet verstrikt raakt in het bootlogo
problemi auricolare bluetooth
avete riscontrato problemi nella connessione con l'auricolare? la prima chiamata va bene, alla seconda chiamata si riavvia il tab.
[Q&A] [ROM] [4.4.4] [GCC 4.8] [SaberMod] [Build 5] [21/02/2015] Unofficial CyanogenM
Q&A for [ROM] [4.4.4] [GCC 4.8] [SaberMod] [Build 5] [21/02/2015] Unofficial CyanogenMod 11
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] [GCC 4.8] [SaberMod] [Build 5] [21/02/2015] Unofficial CyanogenMod 11. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Great ROM, it's incredibly speedy! However, I have one issue where the phone reboots after locking it with the power button, so I don't really know what's going on there. I'm rocking build 5.
hello! gps?
[ROM] [4.4.4] [GCC 4.8] [SaberMod] [Build 5] [21/02/2015] Unofficial CyanogenM
Hey great rom loving it so far apart from the DT2W! phone went from fully charged before I went to bed to dead by morning, I gather this is a battery eater having a quick read around.
Is there a way to turn it off in an option somewhere or is my only choice to go back to build 4?
Thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:37 AM ----------
HolyCowHeyNow said:
Great ROM, it's incredibly speedy! However, I have one issue where the phone reboots after locking it with the power button, so I don't really know what's going on there. I'm rocking build 5.
Click to expand...
Click to collapse
Is it actually rebooting on its own or are you unable to get it to turn on by pressing the power button as build 5 uses double tap to wake where you tap the screen twice to bring it out of sleep.
Confused me for a while I was long pressing the power button constantly to make it reboot thinking it was a bug.
sometimes the camera frozen when i take a picture
Very good! Veeery Goooood! congratulations!
Good work. The Rom (10.03) is fast and smooth. But i have no deepsleep.
Sent from my XT1039 using XDA Free mobile app
It's the system update service (Google Dienste)
Sent from my XT1039 using XDA Free mobile app
Busybox/Lucky Patcher
Hola, excelente ROM!
He tenido problemas ya sea al instalar Busybox (Stericson) y al parchar Android con Lucky Patcher, con otras ROMs no he tenido dramas, no sé si será algo relacionado con tu ROM o provocado por estas Apps.
Hey there, nice ROM!
I've got some issues with Busybox (Stericson) and with Lucky Patcher when patching it to android, don't know if it is your ROM fault or just because those Apps.
Saludos y genial usar la ROM de un compatriota.
What happened to your cm11 thread in development section? Is it closed/renamed or am I blind. Anyway, I wanted to report a camera bug in cm11 build 5. After a shot it freezes and the picture is not saved. Restart with cleaned dalvik cache helps but temporarily only.
Sent from my XT1039 using XDA Free mobile app
Hey there friend! First of all, thank you very much for this ROM, I was using CM12 stock and it was just way too buggy and slow so I decided to give your ROM a go! And I can say I am very pleased so far! You've done a great job!
All I want is to point out the two issues that are pretty much the only that bother me about this... One is a sound crackling issue I'm getting (very noticeable when I receive a SMS for example) and the fact that the "link ringtone volume with notification volume" doesn't do what's intended to do :s
Apart from this, I highly recommend this ROM and I'm about to flash the next build (3) on my device as we speak!
Xbox 360 controller
is there any chance to get an xbox controller working with this rom? or is that to do with the kernel?
Thanks
Hello! I've been using your ROM, with all the recommended settings you said, and I'm not getting anywhere near the battery life and SoT you're getting! Anything I'm doing wrong? :s ai took some screenshots... Check them out please!
Hey my headphones ( I tried a lot of headphones )doesnt work on build 3 , thanks!
Battery saver
Hi,
Great ROM so far, amazing work !
I wondering, could we have an option to disable data when mobile in is save battery mode ? Or maybe more options for the battery mods ?
Thank you.
Cómo rootear?
He hecho todo lo posible por rotearlo y no lo eh conseguido, la app Supersu desaparece, pero sigue instalada!
No entiendo nada jaja
Q&A for [ROM][LP][5.1] CyanogenMod 12.1 - UNOFFICIAL BUILDS for Peregrine (04/10)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][LP][5.1] CyanogenMod 12.1 - UNOFFICIAL BUILDS for Peregrine (04/10). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Man, tks a lot
Testing it now
But GApps link is off. Could you, please, reupload it?
Hi, I flashed your last build about 24 hours ago and it doesn't really have any severe issues in my opinion. No FCs (except for Swiftkey, occasionally), smooth, no problems restoring apps with TB, no reboots at all, normal battery life. Anyway, I noticed the status bar is a bit laggy, sometimes it takes a lot to refresh and the root symbol just won't go away, reboot needed. For this particular matter, I also couldn't find the option to disable the root symbol in the bar Settings, am I missing something? Thanks for your hard work, though!
From CM12 to CM12.1
Hey,
thanks for your great work! I have the peregrine and I flashed CM12 a while ago and it worked fine, but now I want to install the CM12.1
Can I do this just via the CMUpdater as I used to do with the other updates so far?
I'm on 12-20150407-NIGHTLY with Android Version 5.0.2. What about the Google Apps?
Cheers and thanks a lot
Maybe read previous posts. SIM card not working. OP will surely deliver
---------- Post added at 11:32 AM ---------- Previous post was at 11:07 AM ----------
Tried build 20150601 and 20150603 and "No SIM card" bug appearing. Cannot search for networks (infinite searching). Gonna try 20150602 from autoupdate.
XT1039, previous OS was SlimKAT.
How can I Upload the radio?
please , I'm in cm 12.1 15-07 and I want to upload the rom, can anybody help me...sorry for my bad english.
O alguien que hable español me puede ayudad jaja
The development has started, and the first experimental/nightly builds are up!
Links below.
https://download.lineageos.org/cancro
Happy Flashing!
Edit: I'm not neither a maintainer nor a developer, all the credits go to the Lineage OS devs!
Edit 2: Review Highlights
- Subtratum works fully! (Selecting 7.1.1 OMS)
- Smooth performance
- Good battery life (longer than the latest CM14.1 nightlies)
- No random reboots yet (3 days of usage)
Any issues found in the first nightly?
okaraosp29 said:
Any issues found in the first nightly?
Click to expand...
Click to collapse
Hi all,
My device is MI3
I have successfuly upgraded (dirty flash) from last CM14 nightly (1225) to experimental build lineage-14.1-20170123-experimental-cancro-signed
after that I upgraded to lineage-14.1-20170123-nightly-cancro-signed
I just did clear dalvik cache and cache and I have no problems with existing apps and data.
Only thing that happened is it took very long time to upgrade, it was stuck for a while on beggining of installation.
OK, thanks for the information. Btw are you facing vierd contact bug? Where one phone number gets combined with another resulting changed names? Sometimes two names combined? I'm really having hard time. Started with cm14.1 and still in the lineage os (unofficial)
okaraosp29 said:
OK, thanks for the information. Btw are you facing vierd contact bug? Where one phone number gets combined with another resulting changed names? Sometimes two names combined? I'm really having hard time. Started with cm14.1 and still in the lineage os (unofficial)
Click to expand...
Click to collapse
No, I haven't noticed a contacts bug.
But keep in mind I'm not using gapps and I don't have google account configured on the device. I'm using DAVdroid to sync contacts from private cloud (owncloud).
Nightly ROM Review after clean install on Mi4w (non-LTE):
* Flashing the update takes forever (don't panick)
* No out-of-the box SU support for Apps (you can flash phh's or LOS extras SU)
* Fast and better battery performance
* No problems so far, very smooth
Any idea to fix audiofx Lineage Os ? Cz not work for me
Hello, i have mi4 cancro with the ROM lineage to Android 7.1.1. My infrared doesn't work? Anybody with this problem? I think the battery drain more faster with this ROM. Salut
Help
silv3rfox said:
The development has started, and the first experimental/nightly builds are up!
Links below.
https://download.lineageos.org/cancro
Happy Flashing!
Edit: I'm not neither a maintainer nor a developer, all the credits go to the Lineage OS devs!
Edit 2: Review Highlights
- Subtratum works fully! (Selecting 7.1.1 OMS)
- Smooth performance
- Good battery life (longer than the latest CM14.1 nightlies)
- No random reboots yet (3 days of usage)
Click to expand...
Click to collapse
I have installed the lineage OS on Xiaomi MI4
Error 3 navigation keys not working, and very poor 3G wave, help me:crying::crying:
kang chul min said:
I have installed the lineage OS on Xiaomi MI4
Error 3 navigation keys not working, and very poor 3G wave, help me:crying::crying:
Click to expand...
Click to collapse
Same problem....
Hola , tengo un problema con el sensor infrarrojos no sirve , como lo activo??
android_odv said:
Hola , tengo un problema con el sensor infrarrojos no sirve , como lo activo??
Click to expand...
Click to collapse
Tengo el mismo problema con mi MI4 cancro
root--selinuxmodechanger.apk---change to permissive
My gyroscope didn't work, anyone have a working gyro can upload their persist.img?
here is my review of lineage os on mi4 check it out : https://www.youtube.com/watch?v=fjhHADACx2k&t=5s
Hi,
root on my Mi4 is not working at all.
barchitiello said:
root--selinuxmodechanger.apk---change to permissive
Click to expand...
Click to collapse
this requires working root...
Anyone has an idea how to enable root?
Running latest nightly Lineageos on Xiaomi Mi4.
Regards
digital.tv said:
Hi,
root on my Mi4 is not working at all.
this requires working root...
Anyone has an idea how to enable root?
Running latest nightly Lineageos on Xiaomi Mi4.
Regards
Click to expand...
Click to collapse
Did you already flash superuser?
Yes i did, but without success.
I flashed su from official lineage webpage and since than root works without probs
That's the su i flashed too
After reboot su needs an update, but that does not work too...