Related
I am thinking about ordering this:
http://www.amazon.com/G2x-T-Mobile-..._24?s=wireless&ie=UTF8&qid=1304350783&sr=1-24
But was wondering if I should spend the money and get a LG issued micro usb and car charger.
Anyone have experience with these chargers?
Hmmm that's alot of stuff for such a cheap price. Makes me wonder the build quality of that stuff. I might stay away from that. Just my opinion though. But to answer your question, I use a micro-usb cable I got from newegg. I also use the car charger I got with my MyTouch Slide a year ago.
First thing I thought was "too good to be true" and in my experience cheap stuff brakes stuff.
Yeah I think the quality of those accessories is probably quite low. If you want a good micro-usb cable I ordered 3 of these about a year ago and still use them today and they work fine on the G2x for data transfer and charging:
http://www.newegg.com/Product/Produ...&cm_re=micro_usb_cable-_-12-189-164-_-Product
I still have my micro usb charger I used for my blackberry curve (2 yrs old). I would assume that would work. I wonder if the old wall charger would work as well.
Those chargers are pretty much worthless. You need a high amp charger. The phone comes with a 1amp or 1000mA charger. If you buy a cheap charger that's 500mA for example you take more time to charge your phone. If the charger is really weak then you might not charge at all or even drop you battery levels while connected and using your gps in your car.
Note these are Blackberry and Motorolla OEM products that will work with your G2X. I use these and they are fine. They are both under $5 each at Amazon.
http://www.amazon.com/BlackBerry-Fo...PN0S/ref=sr_1_1?ie=UTF8&qid=1304613708&sr=8-1
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1304613757&sr=8-1
http://www.amazon.com/BlackBerry-Cable-Micro-1-0m-Black/dp/B001QATRCA/ref=zg_bs_wireless_10
Cheap doesn't mean bad. All that stuff costs nothing to make anyways.
I buy stuff like that all the time off amazon.com.
I buy stuff like that all the time off amazon.com.
I can tell you you get what you pay for.
I buy stuff like that for coworkers and everthing is still working fine except car chargers breaking because of rough handling of the chargers. Evething else is alive and kicking.
If you decide to get it let me know how the car charger, Charges the phone, and make sure to post pictures because some times picture are diffrent from what is posted on the web.
I personally got this charger from T-Moble (granted, it was $30), 4.8v 1A... and integrated it into my car:
Code:
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=f2105fae-0bb1-47f2-b53b-a8acc9e98c56&inCart=True&catCode=-1
I removed the LED since it's hardwired to the car.
Grated, if you want to move the charger from car to car it's not ideal to hard-wire it... but eh.
Be careful what you buy.
I ordered a Micro-USB cable from an Amazon vendor. It was the one in this package:
http://www.amazon.com/gp/product/B004XGBBY6
Package seemed good enough. Good deal. The case was serviceable (I won't use it fulltime, but for what I paid, I wasn't expecting much-- it's good for putting my phone in for when it's in the car, sitting on the dash, so that it doesn't slide around while I get GPS maps). The car charger works pretty well. But the USB cable...
I was experiencing battery drain from my phone while it was plugged into my desktop PC's USB with the aftermarket cable.
The next day I tried it with the one that shipped with my phone from LG and it works just fine.
For reals, has anyone experienced battery drain with an aftermarket cable while it was plugged in?
eatabagel said:
Be careful what you buy.
I ordered a Micro-USB cable from an Amazon vendor. It was the one in this package:
http://www.amazon.com/gp/product/B004XGBBY6
Package seemed good enough. Good deal. The case was serviceable (I won't use it fulltime, but for what I paid, I wasn't expecting much-- it's good for putting my phone in for when it's in the car, sitting on the dash, so that it doesn't slide around while I get GPS maps). The car charger works pretty well. But the USB cable...
I was experiencing battery drain from my phone while it was plugged into my desktop PC's USB with the aftermarket cable.
The next day I tried it with the one that shipped with my phone from LG and it works just fine.
For reals, has anyone experienced battery drain with an aftermarket cable while it was plugged in?
Click to expand...
Click to collapse
Well typically USB doesn't have enough juice to power the phone while you are using it. It might in some cases but with WiFi, the screen, GPS, or whatever... you probably won't be charging the battery much if at all, and in fact might be losing power.
The same with USB chargers. The better chargers provide more power where most only provide the standard 5v (just like a desktop) so with heavy usage (GPS, screen, bluetooth) you might not gain anything.
I'm not sure about PC's because computers follow the standard of 5v and I don't think they will send more over the cable. A bad cable will have more resistance and probably not do as good of a job but overall should work.
The answer is any microUSB cable will work because it is a standard. Chargers (home and car) should provide more power to give it a faster charge.
Some Chargers are able to do "fast-charges" which I know the G2x can handle. I have a Microsoft Zune charger and it devastates my battery charge times. I'll be full in like 30min.
Typically batteries like a slow progressive charges though, which seem to last the longest. Oddly enough, I get the best battery life by charging my phone via my USB port on my Cable Box (haha).
As long as the charger's output is 5V then you're good. The higher the milliamp output on the charger the faster yourphone will charge.
Sent from my LG-P999 using XDA App
player911 said:
Well typically USB doesn't have enough juice to power the phone while you are using it. It might in some cases but with WiFi, the screen, GPS, or whatever... you probably won't be charging the battery much if at all, and in fact might be losing power.
Click to expand...
Click to collapse
My phone charges just fine when I'm using while connected to my computer via USB.
It's the amperage that counts when it comes to filling up your battery. I've used .5, .6, .8 and 1 amp wall adapter and car chargers. The 1 amp charges much faster but, if I remember my USB spec, that's all that was allowed until Apple came along PCs are typically restricted to 500 milliamps (.5 amp) so it's a little slower but still enough to charge it., even under use. I suppose if you have GPS seeking satellites and the display turned up all the way you may draw more than 500 milliamps but I'd be surprised.
EDIT: if you're really interested in this stuff, check http://batteryuniversity.com/ and https://secure.wikimedia.org/wikipedia/en/wiki/Universal_Serial_Bus#Power
One of the things I loved most about my Nexus 4 was just how quickly it charged. And unlike my SGSII before it, it could even gain a charge while being actively used for Waze. Really great.
With the 5 I'm back to where I was. And thanks to tools I picked up during the 4, I'm able to see why more easily. Seems on the exact same chargers I used my 4 on, I'm easily pulling 400+mA less than the 4 did from the same device and same cable.
I haven't had time to draw a correlation yet, but last night at home on a multi-out adapter from Monoprice I was able to pull over 1200mA which is more than I've ever seen ANY of my devices pull before. But today, on the same model at my office, but with a different cable, I'm pulling around 200mA. Same as what I was getting in my car, which would frequently dip into the negatives, and that was WITHOUT Waze running. Also of note, in ALL of these locations it's being listed as "USB plugged" instead of "AC plugged." I'd say that accounts for the difference there, but the 1200mA draw was listed the same way, so I doubt it.
So, has anyone else noticed this yet and found any correlations between devices, cables, etc., so we can figure this out? Using more power than it takes in will not be something I can survive with and will definitely make this phone a less-than-ideal upgrade over the 4 in the battery life department. But it's pretty clear it's not impossible to get a good charge.
(and yes, before anyone asks, all of my adapters have jacks with a minimum of 1A out, and each also has a 2.1A port. Surprisingly, unlike my 4 which tended to draw LESS power from the 2.1A port, the 5 appears to be unconcerned by the difference, pulling the same poor number from both)
Yes, i agree with you. I just check today, charging my phone from the pc and it seems fast charge isn't doing its thing.
duckied said:
Yes, i agree with you. I just check today, charging my phone from the pc and it seems fast boot isn't doing its thing.
Click to expand...
Click to collapse
Well, I haven't even dared test it from a PC yet. All I can say is from wall warts and car chargers it's terrible. I can't imagine how bad it is from the limited PC ports. Although it's probably exactly the same, since it seems to be identifying all my wall outlets as USB connections.
using my lg g2 charger and it charges my nexus 5 super fast. 1 hour charge will give me almost full battery
spadeace9 said:
using my lg g2 charger and it charges my nexus 5 super fast. 1 hour charge will give me almost full battery
Click to expand...
Click to collapse
Not too surprising. I've read other reports that it charges nice and fast with the stock charger, which is likely the same as the G2 charger since they share most of the same hardware. But that doesn't help with car charging or those of us who've consolidated into multi-port chargers.
When I get home I'm going to mix and match some cables and devices and try to narrow in a bit more. This sounds like the Nexus 7 (2012) goose chase all over again.
The USB/AC detection is done with a definied resistance. Some chargers don't meet those exact resistances (cheap resistors have a big tolerance) -> the phone detects it as USB.
The cable can make big difference, I've tested several different cables on the N4 once, charging rate was between 600mA and ~1100mA (which should be the max) on the same charger.
Maybe the resistance in the charger is right inside the resistance tolerance, so the slight difference in resistance between the cables is enough.
Since the N4 most probably uses a different charge IC than the N5 (I haven't checked tho), it could be that the N4 had a wider tolerance than the N5.
What should help are those charge cables , the one I'm using from Porta Pow can only be used for charging therefore ignoring the charger resistance -> phone should always detect it as AC(even on a PC). Another good thing about those cables is the big wire diameter. Or a kernel where you can force AC charging regardless of the actual source.("fast charge")
That all sounds pretty logical. Considering I got much better results with the Monoprice premium cables I used last night (which oddly, are much THINNER than the cheaper ones), I'm going to experiment with those this evening and see if that makes all the difference.
As for kernels, I'm not planning to root this one if I can help it. I managed to get through the life of my 4 without rooting, too. I know it's heresy on XDA not to root, and until I got Nexus devices I would have agreed. But since stock Jelly Bean I haven't felt that burning need to "take back" control of my phone. I seem to already have plenty.
I observed the same inconsistencies with the N5's charging behavior and did some qualitative tests. I've attached a screenshot with my findings.
The phone is clearly capable of charging rapidly. My primary focus is getting a high current off the car charger. Is there a way to force AC charging mode vs. USB charging, or should I focus on more quality cables / adapters?
Just did some additional testing of my own and found some interesting results. I didn't take perfect notes, but here's what I got:
With the Monoprice 4-port Wall Charger 2.1A 8856:
Cheap Monoprice cable: bad charging, fluctuating between -80A and 200A.
Cheap unknown cable: same as above.
Monoprice premium 3ft cable: 900-1200A.
Monoprice premium 6ft cable: 700-900A.
With the Monoprice 1A car charger 6765:
Bad charging with all cables tried.
With the Monoprice 2.1A car charger 8858:
Bad charging with all cables tried, with exception of Monoprice premium 3ft cable which had same low end, but occasionally bumped over 300A.
With 3.1 (split between two ports) charger purchased on Amazon (my standby for my Nexus 4:
Bad charging with all cables tried.
With Monoprice 2-port USB Car Charger 3.1A 10071:
Cheap Monoprice cable: Bad charging
Cheap unknown cable: Bad charging
Monoprice premium 3ft cable: 700-900A
So it looks like high-end Monoprice paired with high-end Monoprice pays off. Unfortunately there's a rather serious catch with model 10071: it KILLS GPS. At least it did on my Nexus 4, and other reviews reported it as well. I can't be certain yet about it on the 5, but the little experimenting I did in the parking lot showed some anomalies I didn't like. Which means I apparently get to choose between GPS killing my battery, or charging my battery killing my GPS.
Also tried Nexus 7 2012 charger with its own cable and got bad charging, too.
TurboFool said:
Just did some additional testing of my own and found some interesting results. I didn't take perfect notes, but here's what I got:
With the Monoprice 4-port Wall Charger 2.1A 8856:
Cheap Monoprice cable: bad charging, fluctuating between -80A and 200A.
Cheap unknown cable: same as above.
Monoprice premium 3ft cable: 900-1200A.
Monoprice premium 6ft cable: 700-900A.
With the Monoprice 1A car charger 6765:
Bad charging with all cables tried.
With the Monoprice 2.1A car charger 8858:
Bad charging with all cables tried, with exception of Monoprice premium 3ft cable which had same low end, but occasionally bumped over 300A.
With 3.1 (split between two ports) charger purchased on Amazon (my standby for my Nexus 4:
Bad charging with all cables tried.
With Monoprice 2-port USB Car Charger 3.1A 10071:
Cheap Monoprice cable: Bad charging
Cheap unknown cable: Bad charging
Monoprice premium 3ft cable: 700-900A
So it looks like high-end Monoprice paired with high-end Monoprice pays off. Unfortunately there's a rather serious catch with model 10071: it KILLS GPS. At least it did on my Nexus 4, and other reviews reported it as well. I can't be certain yet about it on the 5, but the little experimenting I did in the parking lot showed some anomalies I didn't like. Which means I apparently get to choose between GPS killing my battery, or charging my battery killing my GPS.
Also tried Nexus 7 2012 charger with its own cable and got bad charging, too.
Click to expand...
Click to collapse
There's a pattern obviously, the 6ft to 3ft drop seems high but is ok I guess.
I've never seen such a picky device when it comes down to charging, usually it just works as expected ^^
Have you tried your cables on the carger it came with ? Or the cable it came with on your other cargers ?
Is there something with "AWG" written on your cables ?
@random_dgp: Well you basically have 2 choices: get a kernel with (force) fast charge support (don't know if there is one yet) or get a charger/cable combo which works.
If you're planning on rooting your N5 anyway I would go for the kernel way I guess, since the charger and the cable are fine most probably, they just aren't in the specs the N5 requires.
maisi said:
There's a pattern obviously, the 6ft to 3ft drop seems high but is ok I guess.
I've never seen such a picky device when it comes down to charging, usually it just works as expected ^^
Have you tried your cables on the carger it came with ? Or the cable it came with on your other cargers ?
Click to expand...
Click to collapse
The first-gen Nexus 7 was at least this bad. Actually its biggest problem was it refused to even ADMIT it was charging (even though it was) off of most devices. In fact everything I just listed it would claim wasn't even connected to it. A few hours later it was full, but it refused to recognize it. 4.2 fixed that, but it was still slow off of most devices. This at least admits it's being charged, but barely is.
And no, I haven't tried the stock charger yet. I guess I will, but it's not a high priority since it doesn't cover my issues.
TurboFool said:
One of the things I loved most about my Nexus 4 was just how quickly it charged. And unlike my SGSII before it, it could even gain a charge while being actively used for Waze. Really great.
With the 5 I'm back to where I was. And thanks to tools I picked up during the 4, I'm able to see why more easily. Seems on the exact same chargers I used my 4 on, I'm easily pulling 400+mA less than the 4 did from the same device and same cable.
I haven't had time to draw a correlation yet, but last night at home on a multi-out adapter from Monoprice I was able to pull over 1200mA which is more than I've ever seen ANY of my devices pull before. But today, on the same model at my office, but with a different cable, I'm pulling around 200mA. Same as what I was getting in my car, which would frequently dip into the negatives, and that was WITHOUT Waze running. Also of note, in ALL of these locations it's being listed as "USB plugged" instead of "AC plugged." I'd say that accounts for the difference there, but the 1200mA draw was listed the same way, so I doubt it.
So, has anyone else noticed this yet and found any correlations between devices, cables, etc., so we can figure this out? Using more power than it takes in will not be something I can survive with and will definitely make this phone a less-than-ideal upgrade over the 4 in the battery life department. But it's pretty clear it's not impossible to get a good charge.
(and yes, before anyone asks, all of my adapters have jacks with a minimum of 1A out, and each also has a 2.1A port. Surprisingly, unlike my 4 which tended to draw LESS power from the 2.1A port, the 5 appears to be unconcerned by the difference, pulling the same poor number from both)
Click to expand...
Click to collapse
OOC what sort of dmm/ammeter are you using to measure this?
TurboFool said:
One of the things I loved most about my Nexus 4 was just how quickly it charged
Click to expand...
Click to collapse
i dont know if you're making this up, or if i have a defective nexus 4 lol
before i optimized my N4 i was getting about 4-5 hours of screen time, but it took at least 3 full hours to charge. that charge time to usage time ratio was killing me.
i am having much much much better results with my N5. i have no reason to charge it through a USB port on the computer(are you using an USB 1.0 port or something?), but charging it with the charger that it came with, i get a full charge in about 2 hours.
my N5 will charge a tiny bit over 1% per minute(while on or off), until it gets to 80% and then it charges at about .5% per minute or something
if you're getting the same charge times on the wall charger then i think you might have a defective charger/device. testing this will also be a good way to find out if it's just a slow usb port too
TurboFool said:
The first-gen Nexus 7 was at least this bad. Actually its biggest problem was it refused to even ADMIT it was charging (even though it was) off of most devices. In fact everything I just listed it would claim wasn't even connected to it. A few hours later it was full, but it refused to recognize it. 4.2 fixed that, but it was still slow off of most devices. This at least admits it's being charged, but barely is.
And no, I haven't tried the stock charger yet. I guess I will, but it's not a high priority since it doesn't cover my issues.
Click to expand...
Click to collapse
Oh that's bad , I didn't know that!
Would just be the "reference test" since the stock charger should meet all the specs (and works fine here with every cable).
@cutterjohn: "Currentwidget" can display those values.
Enddo said:
i am having much much much better results with my N5. i have no reason to charge it through a USB port on the computer(are you using an USB 1.0 port or something?), but charging it with the charger that it came with, i get a full charge in about 2 hours.
my N5 will charge a tiny bit over 1% per minute(while on or off), until it gets to 80% and then it charges at about .5% per minute or something
if you're getting the same charge times on the wall charger then i think you might have a defective charger/device. testing this will also be a good way to find out if it's just a slow usb port too
Click to expand...
Click to collapse
The problem he's having isn't about a computer USB port at all, the problem is that the N5 thinks it's plugged in a computer and limits the current to 500mA to meet the USB specs (and don't blow up some usb ports without a fuse somewhere) but in reality it's plugged in a wall charger.
His phone should be fine since it's working as expected on some carger/cable combos.
Btw. the N5 isn't pulling more current than the N4(both 1,2A), so it should charge almost exactly as fast/slow as the N4. It should even be a bit slower since the battery is slightly bigger I think.
cutterjohn said:
OOC what sort of dmm/ammeter are you using to measure this?
Click to expand...
Click to collapse
I'm simply using the app Battery Monitor Widget. Really handy tool that solved some problems for me on the 4 with some weird charging situations. While I'm sure it's not insanely precise, it reflects my draining or charging rate well enough to show me what's going on.
Enddo said:
before i optimized my N4 i was getting about 4-5 hours of screen time, but it took at least 3 full hours to charge. that charge time to usage time ratio was killing me.
i am having much much much better results with my N5. i have no reason to charge it through a USB port on the computer(are you using an USB 1.0 port or something?), but charging it with the charger that it came with, i get a full charge in about 2 hours.
my N5 will charge a tiny bit over 1% per minute(while on or off), until it gets to 80% and then it charges at about .5% per minute or something
if you're getting the same charge times on the wall charger then i think you might have a defective charger/device. testing this will also be a good way to find out if it's just a slow usb port too
Click to expand...
Click to collapse
I think you're missing the fact that I'm comparing it directly to how well these same devices charged the 4. So they're clearly not defective so much as the 5's requirements have changed completely. And USB 1.0 (I think you mean 1.1) isn't relevant here, as I'm not charging off a computer, I'm charging off a wall and/or car adapter. But sounds like we had very different experiences with the 4. I could charge my 4 off my Monoprice pocket battery in crazy fast time, and my phone was always full by the time I reached my destination in the car, even with Waze running (once I figured out I couldn't use the long cable I was using initially).
maisi said:
Oh that's bad , I didn't know that!
Would just be the "reference test" since the stock charger should meet all the specs (and works fine here with every cable).
Click to expand...
Click to collapse
Absolutely. A control of sorts. Might as well.
Btw. the N5 isn't pulling more current than the N4(both 1,2A), so it should charge almost exactly as fast/slow as the N4. It should even be a bit slower since the battery is slightly bigger I think.
Click to expand...
Click to collapse
Exactly. That's why I was surprised. There's no way it SHOULD be this much slower. Yes, I can see percentage adjusting slightly for the larger battery, but that's why I'm going by mA input instead, and my 4 was getting WAY better in the car. Although I don't think it ever got the 1.2 I'm getting with the Monoprice wall combo, so THAT's impressive. Now if I can just get that in my car without the RF interference and I can call it a day.
maisi said:
@cutterjohn: "Currentwidget" can display those values.
Click to expand...
Click to collapse
Well then your either have defective hardware or currentwidget just doesn't work. As I inferred hard to tell w/o proper tools.
[EDIT]
Oops, multiple responses and replied to incorrect one, but really if your recharge rate is that much lower v. n4 I'd say that your chargers or n5 are defective. It's going to take longer to charge the n5 obviously, and I have no idea what the max draw either can achieve as I've been strictly using inductive charging w/max 1A supply(as per Qi spec)... n5 takes longer to charge than n4, but thats to be expected by batt cap(and wear(decreased cap) of n4 batt)...
Subjectively, the n5 takes longer to charge, but not that much longer that I've noticed, again batt cap, etc. so...
Both USB/AC adapter chargers I know supply a max of 1.2A...
...(from last so) ask for a replacement n5, after they've been replacing them for a single dead pixel...
[/EDIT]
My n5 charging real fast fatter t than my n4!
Sent from my Nexus 5 using Tapatalk
cutterjohn said:
Well then your either have defective hardware or currentwidget just doesn't work. As I inferred hard to tell w/o proper tools.
Click to expand...
Click to collapse
Neither I think, we don't need any mA values to see that something is wrong, android is telling us that it thinks that it's connected to a usb port while it isn't.
Of course if we would want to measure exact mA values we would need a different equipment, for cable comparisions in order to see a tendency, the values from the charge IC should be good enough.(IMO)
[EDIT]
Oops, multiple responses and replied to incorrect one, but really if your recharge rate is that much lower v. n4 I'd say that your chargers or n5 are defective. It's going to take longer to charge the n5 obviously, and I have no idea what the max draw either can achieve as I've been strictly using inductive charging w/max 1A supply(as per Qi spec)... n5 takes longer to charge than n4, but thats to be expected by batt cap(and wear(decreased cap) of n4 batt)...
Subjectively, the n5 takes longer to charge, but not that much longer that I've noticed, again batt cap, etc. so...
Both USB/AC adapter chargers I know supply a max of 1.2A...
...(from last so) ask for a replacement n5, after they've been replacing them for a single dead pixel...
[/EDIT]
Click to expand...
Click to collapse
Just saw your edit ^^
Well it looks like the N5 has a very low tolerance for AC/USB detection, I'm sure that neither his chargers or Phone are defective, the chargers just aren't 100%in the spec which is obviously enough. I'm sure that the stock charger would be fine.
cutterjohn said:
Well then your either have defective hardware or currentwidget just doesn't work. As I inferred hard to tell w/o proper tools.
[EDIT]
Oops, multiple responses and replied to incorrect one, but really if your recharge rate is that much lower v. n4 I'd say that your chargers or n5 are defective. It's going to take longer to charge the n5 obviously, and I have no idea what the max draw either can achieve as I've been strictly using inductive charging w/max 1A supply(as per Qi spec)... n5 takes longer to charge than n4, but thats to be expected by batt cap(and wear(decreased cap) of n4 batt)...
Click to expand...
Click to collapse
Clearly neither is the case from my testing. The N5 charges beautifully off of the right combination of chargers, and all of those chargers charged the N4 beautifully. Neither is defective, but the N5 apparently has a different tolerance requirement than the N4.
Really, as opposed to anything being defective, it sounds more like a design flaw in the N5. It's WAY too picky about its power sources.
Mine charged REALLY slow the first day and that night. It also drained really quickly during that same time. I am now on my third day and it has long battery life plus it charged about 20% in 30 minutes on a car charger. Seems quicker than my S3.
This is my first experience with wireless charging so I'm probably missing the obvious here so please, anybody, point that out.
I'm newly using a wireless charger with my N5 & performance just doesn't make any sense to me. It's the Korean/Chinese knock-off of the N4 Orb which others on XDA have used successfully. On basic charging it does work but I can't make any sense of these numbers:
Charging I get roughly 10% per hour -- not great, but okay for bedside/overnight.
Charging with daydream on (Dashclock) on I get a loss of roughly 10% per hour! Yes, the phone keeps indicating it is charging in spite of this heavy drain.
But sometimes daydream just turns off & it returns to charging -- this seems to happen if I start off with the phone (mostly) charged. For the most part though, if I leave the phone on the charger overnight with daydream enabled I'll wake to a nearly empty battery.
As I said, these numbers make no sense to me at all. Part of the problem may be the power source for the orb - it's only 1A but even if it's underpowered I can't see the drop from +10% to -10% /hour.
Second part of my query -- does anyone know if it would be effective (and safe!) to feed 1.2A to the orb & maybe get faster charge. Or maybe that would be enough to keep up with the Daydream drain?
FWIW the the USB charger (1.2A) is very fast, I get better than 1% per minute -- unaffected by Daydream.
im using this and mine gets full charge within 1 and half hours
Sent from my Nexus 5 using xda app-developers app
10% per hour? Something's wrong. A wireless charger shouldn't take much longer than wired.
It's possible your adapter is a dud. Try using the 1.2a adapter, it'll be fine. If it still isn't faster, you might have a bad charger.
Also, if it came with a USB cable, don't use it. The wires are too small to carry a reasonable amount of current.
NotFromMountainView said:
This is my first experience with wireless charging so I'm probably missing the obvious here so please, anybody, point that out.
I'm newly using a wireless charger with my N5 & performance just doesn't make any sense to me. It's the Korean/Chinese knock-off of the N4 Orb which others on XDA have used successfully. On basic charging it does work but I can't make any sense of these numbers:
Charging I get roughly 10% per hour -- not great, but okay for bedside/overnight.
Charging with daydream on (Dashclock) on I get a loss of roughly 10% per hour! Yes, the phone keeps indicating it is charging in spite of this heavy drain.
But sometimes daydream just turns off & it returns to charging -- this seems to happen if I start off with the phone (mostly) charged. For the most part though, if I leave the phone on the charger overnight with daydream enabled I'll wake to a nearly empty battery.
As I said, these numbers make no sense to me at all. Part of the problem may be the power source for the orb - it's only 1A but even if it's underpowered I can't see the drop from +10% to -10% /hour.
Second part of my query -- does anyone know if it would be effective (and safe!) to feed 1.2A to the orb & maybe get faster charge. Or maybe that would be enough to keep up with the Daydream drain?
FWIW the the USB charger (1.2A) is very fast, I get better than 1% per minute -- unaffected by Daydream.
Click to expand...
Click to collapse
So I'm using DashClock also and when it doesn't crash, my phone will charge just fine. Seems like about 3 hours total with daydream on, and about 2 hours with it off just regular charging. Here's my charger: http://www.amazon.com/gp/product/B00DOW1RD0/ref=wms_ohs_product?ie=UTF8&psc=1. Seems like you have a defective charger but it is a really weird situation.
Thanks guys, the jump to 1.2A made a world of difference! It still seems strange, but I guess there's a minimum threshold for the phone to properly charge. (I am really guessing!) Plugging the OEM charger into my qi orb I finally get a positive charge with daydream -- not fast, but good enough to wake with a charged phone! Without daydream I just got about 36% in the past hour.
A quick scan of eBay and the only 1.2A USB supplies I can find are refurbished LG & cost as much as the full qi orb! (from US with crazy shipping costs on these - I'm in Canada) But there are lots of 1.5A blocks, cheap (and free shipping from China). So... do you think it would be safe to try the 1.5A? According to Play the Google qi comes with a 1.8A supply but I have no idea how much the pad modulates the power or if that is all in the phone itself. It would be nice to have fast wireless charging, but with the dramatic jump with just the .2A increase I may be looking at something too powerful.
My concerns are (in order) 1. Don't want to fry the phone!
2. Don't want to burn down my apartment!
3. Would rather not trash the orb. The orb was inexpensive so I'm willing to gamble on point # 3.
Advice / assurances / suggestions? Please.
Mr. Sprinkles said:
Also, if it came with a USB cable, don't use it. The wires are too small to carry a reasonable amount of current.
Click to expand...
Click to collapse
I assume you mean USB out from PC since OEM charger is USB and orb power supply is USB as well. Point taken on PC charging though.
NotFromMountainView said:
Thanks guys, the jump to 1.2A made a world of difference! It still seems strange, but I guess there's a minimum threshold for the phone to properly charge. (I am really guessing!) Plugging the OEM charger into my qi orb I finally get a positive charge with daydream -- not fast, but good enough to wake with a charged phone! Without daydream I just got about 36% in the past hour.
A quick scan of eBay and the only 1.2A USB supplies I can find are refurbished LG & cost as much as the full qi orb! (from US with crazy shipping costs on these - I'm in Canada) But there are lots of 1.5A blocks, cheap (and free shipping from China). So... do you think it would be safe to try the 1.5A? According to Play the Google qi comes with a 1.8A supply but I have no idea how much the pad modulates the power or if that is all in the phone itself. It would be nice to have fast wireless charging, but with the dramatic jump with just the .2A increase I may be looking at something too powerful.
My concerns are (in order) 1. Don't want to fry the phone!
2. Don't want to burn down my apartment!
3. Would rather not trash the orb. The orb was inexpensive so I'm willing to gamble on point # 3.
Advice / assurances / suggestions? Please.
I assume you mean USB out from PC since OEM charger is USB and orb power supply is USB as well. Point taken on PC charging though.
Click to expand...
Click to collapse
The official orb charger comes with a 1.8a brick. You should be fine.
Sent from my Nexus 10 using Tapatalk 4
NotFromMountainView said:
Thanks guys, the jump to 1.2A made a world of difference! [...] you mean USB out from PC since OEM charger is USB and orb power supply is USB as well. Point taken on PC charging though.
Click to expand...
Click to collapse
I mean if your orb uses a USB cable and came with one, don't use the cable it came with. They're often very cheap and add a lot of resistance which will increase charge time.
It wasn't the step up to 1.2A that made a world of difference, it's using a quality adapter that made the difference. Your 1A adapter must have been faulty or grossly overrated. Sounds like it was putting out less than 500mA.
As for a higher amperage power supply somehow damaging things? Not possible. The circuitry in the wireless charger is only going to use what it needs, you could hook it up to a 50A power supply and it'll still draw around 1A. The N5 is also input current limited to 1.2A, so using a crazy high amperage adapter won't have much benefit anyway.
Still, not a bad idea to get a 1.5A - 2A adapter to compensate for whatever current the wireless charger itself uses. This is probably why the official one includes a 1.8A adapter.
Mr. Sprinkles said:
10% per hour? Something's wrong. A wireless charger shouldn't take much longer than wired.
It's possible your adapter is a dud. Try using the 1.2a adapter, it'll be fine. If it still isn't faster, you might have a bad charger.
Also, if it came with a USB cable, don't use it. The wires are too small to carry a reasonable amount of current.
Click to expand...
Click to collapse
Mr. Sprinkles said:
I mean if your orb uses a USB cable and came with one, don't use the cable it came with. They're often very cheap and add a lot of resistance which will increase charge time.
It wasn't the step up to 1.2A that made a world of difference, it's using a quality adapter that made the difference. Your 1A adapter must have been faulty or grossly overrated. Sounds like it was putting out less than 500mA.
As for a higher amperage power supply somehow damaging things? Not possible. The circuitry in the wireless charger is only going to use what it needs, you could hook it up to a 50A power supply and it'll still draw around 1A. The N5 is also input current limited to 1.2A, so using a crazy high amperage adapter won't have much benefit anyway.
Still, not a bad idea to get a 1.5A - 2A adapter to compensate for whatever current the wireless charger itself uses. This is probably why the official one includes a 1.8A adapter.
Click to expand...
Click to collapse
El Daddy & Mr. Sprinkles thanks, that's just the type of reassurance I needed!
just use the 2,1A amazon kindle charger with your orb... its cheap, safe and wont fry your phone
Gesendet von meinem Nexus 5 mit Tapatalk
Mr. Sprinkles said:
I mean if your orb uses a USB cable and came with one, don't use the cable it came with. They're often very cheap and add a lot of resistance which will increase charge time.
It wasn't the step up to 1.2A that made a world of difference, it's using a quality adapter that made the difference. Your 1A adapter must have been faulty or grossly overrated. Sounds like it was putting out less than 500mA.
As for a higher amperage power supply somehow damaging things? Not possible. The circuitry in the wireless charger is only going to use what it needs, you could hook it up to a 50A power supply and it'll still draw around 1A. The N5 is also input current limited to 1.2A, so using a crazy high amperage adapter won't have much benefit anyway.
Still, not a bad idea to get a 1.5A - 2A adapter to compensate for whatever current the wireless charger itself uses. This is probably why the official one includes a 1.8A adapter.
Click to expand...
Click to collapse
So from what I heard wireless charging, like a pogo plug can charge at a higher rate than the micro USB port in some devices (I've heard pogo plug can go up to 2.5A where the micro USB in that device is limited to 1.8A). So I'm wondering as these qi chargers get better, will this also be true. Mine is a 1A but seems like it charges around .8A so it's maxed out. I guess this also raises the question as to how fast is good for a battery also.
Sent from my Nexus 5 using Tapatalk
I've seen a few things online with no charging problems. Mine will charge but super slow. Overnight it will only charge to about 73%. Tried battery calibration and still nothing. Any tricks or fixes I don't know about?
Are you using the original charger and cable? You need at least a 2amp charger and the original cable to charge properly.
Transmitted via Bacon
timmaaa said:
Are you using the original charger and cable? You need at least a 2amp charger and the original cable to charge properly.
Transmitted via Bacon
Click to expand...
Click to collapse
He is right. Older chargers are not 2 amp, and so they will charge, but very slowly. You don't have to necessarily use the original cable, or the stock charger. Really any cable will get you fast charging as long as the block that plugs into the wall is a 2 amp. Chargers that will charge tablets usually work. My wife has an LG G3 and the charger for that works as well.
bradleyw801 said:
He is right. Older chargers are not 2 amp, and so they will charge, but very slowly. You don't have to necessarily use the original cable, or the stock charger. Really any cable will get you fast charging as long as the block that plugs into the wall is a 2 amp. Chargers that will charge tablets usually work. My wife has an LG G3 and the charger for that works as well.
Click to expand...
Click to collapse
Totally untrue and very bad, maybe even dangerous, advice...
Use a sub-standard cable with a 2 amp charger and you run a very serious risk of overheating, damaging the phone or charger, and even the risk of an electrical fire.
Always use good quality cables and chargers, and read other people's recommendations as to what are good. Buying a cheap set just to save a few quid could cost you your phone, or much more.
SimonTS said:
Totally untrue and very bad, maybe even dangerous, advice...
Use a sub-standard cable with a 2 amp charger and you run a very serious risk of overheating, damaging the phone or charger, and even the risk of an electrical fire.
Always use good quality cables and chargers, and read other people's recommendations as to what are good. Buying a cheap set just to save a few quid could cost you your phone, or much more.
Click to expand...
Click to collapse
I agree if you buy a cable that ignores safety standards you could cause a fire, but that to me just has to do with being a cheap cable. Here is some information that supports what I am saying:
http://www.extremetech.com/computin...ks-or-how-to-avoid-blowing-up-your-smartphone
To quote that article "USB 1.0 and 2.0 specs, a standard downstream port is capable of delivering up to 500mA (0.5A); in USB 3.0, it moves up to 900mA (0.9A). The charging downstream and dedicated charging ports provide up to 1500mA (1.5A)"
Also, "You can plug any USB device into any USB cable and into any USB port, and nothing will blow up — and in fact, using a more powerful charger should speed up battery charging."
So perhaps I should explain to the person that asked the question, if your cable is more than a few years old, it may still charge slowly. You need it to be at least USB 3.0. But most cables sold in the last few years are USB 3.0.
Using a cheap quality cable, sure, that's always a bad idea no matter what. Using an older cable, the worst that could happen (assuming it's not in poor condition) is that it will only let .5amps through.
I charged mine last night for 7 hours and it only has 22% battery.
I originally bought a One Plus One in February 2015. It broke and I had to go through the extensive RMA process. Since they shipped the replacement phone to me, I have been noticing more and more problems. The latest being the charging. I cannot get it to charge correctly. Since the RMA process took a month (Feb 22 - March 22), I'm very reluctant to do it again. Considering selling this and going back to AT&T. Or at least some company that has phone support/any support.
I plugged it in 5 minutes ago at 7% battery and now its dead.
Jess650 said:
I charged mine last night for 7 hours and it only has 22% battery.
I originally bought a One Plus One in February 2015. It broke and I had to go through the extensive RMA process. Since they shipped the replacement phone to me, I have been noticing more and more problems. The latest being the charging. I cannot get it to charge correctly. Since the RMA process took a month (Feb 22 - March 22), I'm very reluctant to do it again. Considering selling this and going back to AT&T. Or at least some company that has phone support/any support.
I plugged it in 5 minutes ago at 7% battery and now its dead.
Click to expand...
Click to collapse
Are you using the original charger and cable?
Thanks for input guys. I do not have my original charger anymore. My wife's new kitten has made quick work if several chargers. I purchased one yesterday at local Verizon store. 2amp chargers are actually hard to find. So this is what I got. It charges fast again. Charged my phone from 5% to 71% in about 40 minutes. This model actually States 2.1 amp.
A great replacement is the original Blackberry Playbook charger with the non-removeable cable. Almost as fast as my original charger and a sensible price as well.
Install any ROM except the ones based on Omni.. (like the SlimROMs) and flash boeffla kernel. Keep the AC Charging Current up to 2200A. It says it may damage the USB Cable or charger but nothing ever happened to my Galaxy S3 (on the same kernel) or OPO. It charges extremely fast with the original USB cable and charger. Try it! Worked for all my friends!
As I'm sure is the case for many of you, I have a ton of typical USB chargers around the house, which supply anywhere from 0.8A to 1.5A output. Going with the assumption that I don't care how long it takes to charge, is there any risk with using the USB C-A cable that came with my pixel and plugging into any of those old USB chargers? They should all work, right? Just as different speeds depending on the output current?
I am not an expert, but from my research into the safety of USB-A to USB-C cables, the "risk" will generally come as a result of purchasing a cheap cable that does not have the appropriate (56k) resistor. The cable that came directly from google has the appropriate resistor and is not low quality, so it will be safe to plug into any functioning USB port (either on your computer or a charger).
That being said, if you have a malfunctioning charger, or there is power surge etc., that is an "act of god" and what happens happens
You may actually be better off using these old chargers if they work correctly. The slower you charge your phone, the better it is for the longevity (years) of your battery.
Yeah, that is why I didn't care about charging speed. For plugging it in next to my bed each night, I figure slower is better. However, I just received a mini USB to USB C from Amazon, and used that to plug my pixel in last night to a 1a charger. And while the phone did say charging over USB, it didn't gain any battery overnight and instead continued to discharge until I woke up in the morning. Is anyone else seeing anything like that?
Not trying to be mean or name call but I personally think you all are crazy. Buying a $700 phone and using a cheap charger that could have the risk to break your phone. Especially if you know better. Honestly, spending the $30-$40 from a charger from Google or an approved charger is just smart for the long term and not risk losing $700. Just my 2 cents. I did the same for the car charger.
Sure, I hear your point. But honestly I know that it is better for the battery to charge slower, so I would rather use a low power charger next to my bed each night, and only use the included quick charger when I need a quick top-off.
BlueWRXPride said:
Sure, I hear your point. But honestly I know that it is better for the battery to charge slower, so I would rather use a low power charger next to my bed each night, and only use the included quick charger when I need a quick top-off.
Click to expand...
Click to collapse
Have to consider 2 points since there are so many inaccuracies about this subject:
1) Inadequate chargers with insufficient output cause batteries to become overheated, consequently reduce battery charging cycles. Smart batteries are not adversely affected by certified quick chargers.
2) Turbo chargers do not "top off". When a battery gets to around 80%, the appropriate charger begins its slower charging as to not overload it. Once at 100%, charging stops, and the maintenance process begins. As battery level drops to around 97.6%, trickle charging begins.
In sum, a certified, OEM-equivalent quick charger, even with higher output would not damage batteries.
The phone supports most standards however usb c and Qualcomm quick charge are not compatible and you fall back to 5v 3 amp at best. Make sure to fully insert the cable into the phone. It has to click. I've accidently not charged overnight that way.
I've got a bunch of turbo chargers that I've accumulated over the years. Using a non-[manufacturer of current phone] charger has never damaged my phone. I just bought a 10 pack of USB C adapters and popped one on every charger so I can continue using my old ones. No issues yet and I don't anticipate any.
Sent from my Pixel using Tapatalk
joshw0000 said:
I've got a bunch of turbo chargers that I've accumulated over the years. Using a non-[manufacturer of current phone] charger has never damaged my phone. I just bought a 10 pack of USB C adapters and popped one on every charger so I can continue using my old ones. No issues yet and I don't anticipate any.
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
Sure, you can use non-oem chargers. That's not the problem. Issues only potentially arise when the chargers do not provide adequate output, or their "smart" capabilities are not up to specs. I use all kinds of chargers bought at Verizon, Best Buy, etc. I also use Amazon chargers as long as they're not too far off OEM requirements. Also, people don't think about the importance of a good, thick cable.
I have a ton of Samsung fast chargers and Samsung USB a to c cables . Would those be safe?
parmend said:
I have a ton of Samsung fast chargers and Samsung USB a to c cables . Would those be safe?
Click to expand...
Click to collapse
Many will say no big deal. However, I'd say let's hear it from the horse's mouth. Here's Google engineer Benson Leung https://plus.google.com/+BensonLeung/posts/cEvVQLXhyRX. You be the judge.
Bottom line, to answer your question, no, quick charging methodology used by Samsung and Motorola is not supported by the Pixel. Your phone will charge at a slower rate. Will it damage the phone in the long run? Likely not. Well, I'll let you guys test for me.