Database Info

alternative to the hp charging cable

I lost my wall charger that came with my HP touchpad. The round plug thingie is what I'm looking for. Searching on Amazon brings up a number of items, for example:
http://www.amazon.com/HP-North-American-Charger-TouchPad/dp/B0055QYJJM/ref=dp_cp_ob_e_title_3
However, is there an alternative that works? I was able to use the Evo cable rather than the original HP sync/charge cable that came with the wall charger, but is there an alternative wall plug that works as well? Paying almost $28 for a charging cable seems a bit ridiculous.
Any help and advice would be most appreciated.
[[FOUND MY ANSWER]]
I found that Walmart was having a sale on the North American charger with the barrel wall connector for $11.99 and Meritline was having a sale for 6' long USB to micro-usb cables (pair for $4.99 no tax/shipping).
The listing on the Meritline page says that the cables are compatible with the Evo.
Given that the cable that comes with the HP barrel charger is pretty much monkey spit and fails within a month, I found a solution that works for less than $20.
Links are below:
Walmart HP Touchpad charger
http://www.walmart.com/ip/HP-TouchPad-Accessory-Travel-AC-Wall-Adapter-Charger/16641536
Meritline Cables (use this code MLCK222YNL1 for discount (cannot guarantee how long this code is good for, drops the price for a twin pack of the 6' cables from $10.99 to $4.99)
http://www.meritline.com/showproduc...e=6-feet-high-speed-micro-hdmi-cable-ethernet

Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.

dmarchant said:
Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.
Click to expand...
Click to collapse
Thank you for the advice. To be more specific, can you recommend any alternative charging cables/wall charger units specifically?

Any brand name USB charger that gives off 2 amps should be fine. I tend to stay away from really cheap generic chargers. Any microUSB cable should be fine even a generic one if it has decent reviews. I worry about generic chargers since a poorly regulated one could send a voltage too high, but generic cables should be fine.

The chargers I am currently using, as well as the one that came with the TP, are the one that came with a Blackberry Playbook and the one from my HTC Desire HD.
The Blackberry charger gives an error on the screen that it may not charge the TP, but as it gives 2 amps, charges in pretty much the same time as the official unit.
The HTC again gives the warning and takes about twice as long to charge.

what about the nook color charger i know it higher amps might work as well

cesar2010 said:
what about the nook color charger i know it higher amps might work as well
Click to expand...
Click to collapse
I just tested the TP with a charger for the NC, and unfortunately, it still gives the same "may not charge" warning...

There is NO after market charger that will charge at full rate like the HP barrel charger!
At best they will trickle charge at a much lower rate and take considerably longer to charge.
The TP relies on precise signaling which it will only get from the OEM item or specially modded after market units or cables.
Do a google for further info ie webosnation.com forums.

I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.

Izeltokatl said:
I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.
Click to expand...
Click to collapse
They will not work at full rate!

No one else uses 5.2 volts
Sent from my Samsung Galaxy S2

Don't believe all the hype about using ONLY the HP charger, there are many that do the job perfectly well. Too many people make these authoritarian statements and all they do is cause FUD.
At my office, I use the AC charger from my last Samsung phone (mythic) and it works IDENTICALLY to the OEM one. I have also used a Moto and and LG with NO PROBLEMS. I have no issues getting to fully charged in little time.
At home, my OEM cable is plugged into a high-power USB port (2.1A, I believe) and it has no problem charging from near zero to full as well. Front or top-mounted USB ports tend to be 500mA or less, but the rear ones (coming directly off the motherboard) tend to have a higher supply. I also use a non-HP USB cable occasionally and it works fine.
(I got my TP during the original fire-sale and have been charging it these ways ever since with ZERO ISSUES.)

R1ptide said:
No one else uses 5.2 volts
Sent from my Samsung Galaxy S2
Click to expand...
Click to collapse
The small voltage difference is marginal and isn't going to matter, the internal hardware should be able to tolerate a few tenths of a volt difference. In fact, I tested my Motorola charger rated at 5.1v and the Touchpad charger rated at 5.2v on a multimeter. The Motorola charger was outputting 5.20v and the Touchpad charger 5.16v. Granted this is at no load, but switching transformers are regulated so they should supply rated voltage at any current draw equal to or less than rated. Also depending on how well the voltage is regulated there may still be a slight AC ripple that the device has to deal with.

Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..

sirclesam said:
Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..
Click to expand...
Click to collapse
Its all down to the charge rate that the TP is able to draw.
2A which is theoretically possible from TP AC barrel charger would charge the 6A+ battery of the TP from flat to full in approximately 6.5 hours.
If the BB charger were able to have 500mA drawn by the TP then it would fully charge in approximately 26 hours.
The charges would be no different.

To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.

stuart_f said:
To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.
Click to expand...
Click to collapse
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.

pa49 said:
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.
Click to expand...
Click to collapse
oh, for the love of gods. REALLY? I was just asking for a replacement cable. I don't want to reinvent the charging paradigm. I just need a simple recommendation for a cable. If a thread could be highjacked any further I don't know how it could be.
I appreciate all your "advice" but seriously, this is NOT what I was asking.

Anyone know if I can get a similar cable in the UK? Kind of lost my TP cable, and I miss the flexibility the long cable gave me, it was so much easier to use on charge!

well i know that my tbolt cable works. i have to use the tp adapter though. my tbolt adapter makes the touchpad say that the charger is incompatible.

[Q] Terrible charge rate?

One of the things I loved most about my Nexus 4 was just how quickly it charged. And unlike my SGSII before it, it could even gain a charge while being actively used for Waze. Really great.
With the 5 I'm back to where I was. And thanks to tools I picked up during the 4, I'm able to see why more easily. Seems on the exact same chargers I used my 4 on, I'm easily pulling 400+mA less than the 4 did from the same device and same cable.
I haven't had time to draw a correlation yet, but last night at home on a multi-out adapter from Monoprice I was able to pull over 1200mA which is more than I've ever seen ANY of my devices pull before. But today, on the same model at my office, but with a different cable, I'm pulling around 200mA. Same as what I was getting in my car, which would frequently dip into the negatives, and that was WITHOUT Waze running. Also of note, in ALL of these locations it's being listed as "USB plugged" instead of "AC plugged." I'd say that accounts for the difference there, but the 1200mA draw was listed the same way, so I doubt it.
So, has anyone else noticed this yet and found any correlations between devices, cables, etc., so we can figure this out? Using more power than it takes in will not be something I can survive with and will definitely make this phone a less-than-ideal upgrade over the 4 in the battery life department. But it's pretty clear it's not impossible to get a good charge.
(and yes, before anyone asks, all of my adapters have jacks with a minimum of 1A out, and each also has a 2.1A port. Surprisingly, unlike my 4 which tended to draw LESS power from the 2.1A port, the 5 appears to be unconcerned by the difference, pulling the same poor number from both)

Yes, i agree with you. I just check today, charging my phone from the pc and it seems fast charge isn't doing its thing.

duckied said:
Yes, i agree with you. I just check today, charging my phone from the pc and it seems fast boot isn't doing its thing.
Click to expand...
Click to collapse
Well, I haven't even dared test it from a PC yet. All I can say is from wall warts and car chargers it's terrible. I can't imagine how bad it is from the limited PC ports. Although it's probably exactly the same, since it seems to be identifying all my wall outlets as USB connections.

using my lg g2 charger and it charges my nexus 5 super fast. 1 hour charge will give me almost full battery

spadeace9 said:
using my lg g2 charger and it charges my nexus 5 super fast. 1 hour charge will give me almost full battery
Click to expand...
Click to collapse
Not too surprising. I've read other reports that it charges nice and fast with the stock charger, which is likely the same as the G2 charger since they share most of the same hardware. But that doesn't help with car charging or those of us who've consolidated into multi-port chargers.
When I get home I'm going to mix and match some cables and devices and try to narrow in a bit more. This sounds like the Nexus 7 (2012) goose chase all over again.

The USB/AC detection is done with a definied resistance. Some chargers don't meet those exact resistances (cheap resistors have a big tolerance) -> the phone detects it as USB.
The cable can make big difference, I've tested several different cables on the N4 once, charging rate was between 600mA and ~1100mA (which should be the max) on the same charger.
Maybe the resistance in the charger is right inside the resistance tolerance, so the slight difference in resistance between the cables is enough.
Since the N4 most probably uses a different charge IC than the N5 (I haven't checked tho), it could be that the N4 had a wider tolerance than the N5.
What should help are those charge cables , the one I'm using from Porta Pow can only be used for charging therefore ignoring the charger resistance -> phone should always detect it as AC(even on a PC). Another good thing about those cables is the big wire diameter. Or a kernel where you can force AC charging regardless of the actual source.("fast charge")

That all sounds pretty logical. Considering I got much better results with the Monoprice premium cables I used last night (which oddly, are much THINNER than the cheaper ones), I'm going to experiment with those this evening and see if that makes all the difference.
As for kernels, I'm not planning to root this one if I can help it. I managed to get through the life of my 4 without rooting, too. I know it's heresy on XDA not to root, and until I got Nexus devices I would have agreed. But since stock Jelly Bean I haven't felt that burning need to "take back" control of my phone. I seem to already have plenty.

I observed the same inconsistencies with the N5's charging behavior and did some qualitative tests. I've attached a screenshot with my findings.
The phone is clearly capable of charging rapidly. My primary focus is getting a high current off the car charger. Is there a way to force AC charging mode vs. USB charging, or should I focus on more quality cables / adapters?

Just did some additional testing of my own and found some interesting results. I didn't take perfect notes, but here's what I got:
With the Monoprice 4-port Wall Charger 2.1A 8856:
Cheap Monoprice cable: bad charging, fluctuating between -80A and 200A.
Cheap unknown cable: same as above.
Monoprice premium 3ft cable: 900-1200A.
Monoprice premium 6ft cable: 700-900A.
With the Monoprice 1A car charger 6765:
Bad charging with all cables tried.
With the Monoprice 2.1A car charger 8858:
Bad charging with all cables tried, with exception of Monoprice premium 3ft cable which had same low end, but occasionally bumped over 300A.
With 3.1 (split between two ports) charger purchased on Amazon (my standby for my Nexus 4:
Bad charging with all cables tried.
With Monoprice 2-port USB Car Charger 3.1A 10071:
Cheap Monoprice cable: Bad charging
Cheap unknown cable: Bad charging
Monoprice premium 3ft cable: 700-900A
So it looks like high-end Monoprice paired with high-end Monoprice pays off. Unfortunately there's a rather serious catch with model 10071: it KILLS GPS. At least it did on my Nexus 4, and other reviews reported it as well. I can't be certain yet about it on the 5, but the little experimenting I did in the parking lot showed some anomalies I didn't like. Which means I apparently get to choose between GPS killing my battery, or charging my battery killing my GPS.
Also tried Nexus 7 2012 charger with its own cable and got bad charging, too.

TurboFool said:
Just did some additional testing of my own and found some interesting results. I didn't take perfect notes, but here's what I got:
With the Monoprice 4-port Wall Charger 2.1A 8856:
Cheap Monoprice cable: bad charging, fluctuating between -80A and 200A.
Cheap unknown cable: same as above.
Monoprice premium 3ft cable: 900-1200A.
Monoprice premium 6ft cable: 700-900A.
With the Monoprice 1A car charger 6765:
Bad charging with all cables tried.
With the Monoprice 2.1A car charger 8858:
Bad charging with all cables tried, with exception of Monoprice premium 3ft cable which had same low end, but occasionally bumped over 300A.
With 3.1 (split between two ports) charger purchased on Amazon (my standby for my Nexus 4:
Bad charging with all cables tried.
With Monoprice 2-port USB Car Charger 3.1A 10071:
Cheap Monoprice cable: Bad charging
Cheap unknown cable: Bad charging
Monoprice premium 3ft cable: 700-900A
So it looks like high-end Monoprice paired with high-end Monoprice pays off. Unfortunately there's a rather serious catch with model 10071: it KILLS GPS. At least it did on my Nexus 4, and other reviews reported it as well. I can't be certain yet about it on the 5, but the little experimenting I did in the parking lot showed some anomalies I didn't like. Which means I apparently get to choose between GPS killing my battery, or charging my battery killing my GPS.
Also tried Nexus 7 2012 charger with its own cable and got bad charging, too.
Click to expand...
Click to collapse
There's a pattern obviously, the 6ft to 3ft drop seems high but is ok I guess.
I've never seen such a picky device when it comes down to charging, usually it just works as expected ^^
Have you tried your cables on the carger it came with ? Or the cable it came with on your other cargers ?
Is there something with "AWG" written on your cables ?
@random_dgp: Well you basically have 2 choices: get a kernel with (force) fast charge support (don't know if there is one yet) or get a charger/cable combo which works.
If you're planning on rooting your N5 anyway I would go for the kernel way I guess, since the charger and the cable are fine most probably, they just aren't in the specs the N5 requires.

maisi said:
There's a pattern obviously, the 6ft to 3ft drop seems high but is ok I guess.
I've never seen such a picky device when it comes down to charging, usually it just works as expected ^^
Have you tried your cables on the carger it came with ? Or the cable it came with on your other cargers ?
Click to expand...
Click to collapse
The first-gen Nexus 7 was at least this bad. Actually its biggest problem was it refused to even ADMIT it was charging (even though it was) off of most devices. In fact everything I just listed it would claim wasn't even connected to it. A few hours later it was full, but it refused to recognize it. 4.2 fixed that, but it was still slow off of most devices. This at least admits it's being charged, but barely is.
And no, I haven't tried the stock charger yet. I guess I will, but it's not a high priority since it doesn't cover my issues.

TurboFool said:
One of the things I loved most about my Nexus 4 was just how quickly it charged. And unlike my SGSII before it, it could even gain a charge while being actively used for Waze. Really great.
With the 5 I'm back to where I was. And thanks to tools I picked up during the 4, I'm able to see why more easily. Seems on the exact same chargers I used my 4 on, I'm easily pulling 400+mA less than the 4 did from the same device and same cable.
I haven't had time to draw a correlation yet, but last night at home on a multi-out adapter from Monoprice I was able to pull over 1200mA which is more than I've ever seen ANY of my devices pull before. But today, on the same model at my office, but with a different cable, I'm pulling around 200mA. Same as what I was getting in my car, which would frequently dip into the negatives, and that was WITHOUT Waze running. Also of note, in ALL of these locations it's being listed as "USB plugged" instead of "AC plugged." I'd say that accounts for the difference there, but the 1200mA draw was listed the same way, so I doubt it.
So, has anyone else noticed this yet and found any correlations between devices, cables, etc., so we can figure this out? Using more power than it takes in will not be something I can survive with and will definitely make this phone a less-than-ideal upgrade over the 4 in the battery life department. But it's pretty clear it's not impossible to get a good charge.
(and yes, before anyone asks, all of my adapters have jacks with a minimum of 1A out, and each also has a 2.1A port. Surprisingly, unlike my 4 which tended to draw LESS power from the 2.1A port, the 5 appears to be unconcerned by the difference, pulling the same poor number from both)
Click to expand...
Click to collapse
OOC what sort of dmm/ammeter are you using to measure this?

TurboFool said:
One of the things I loved most about my Nexus 4 was just how quickly it charged
Click to expand...
Click to collapse
i dont know if you're making this up, or if i have a defective nexus 4 lol
before i optimized my N4 i was getting about 4-5 hours of screen time, but it took at least 3 full hours to charge. that charge time to usage time ratio was killing me.
i am having much much much better results with my N5. i have no reason to charge it through a USB port on the computer(are you using an USB 1.0 port or something?), but charging it with the charger that it came with, i get a full charge in about 2 hours.
my N5 will charge a tiny bit over 1% per minute(while on or off), until it gets to 80% and then it charges at about .5% per minute or something
if you're getting the same charge times on the wall charger then i think you might have a defective charger/device. testing this will also be a good way to find out if it's just a slow usb port too

TurboFool said:
The first-gen Nexus 7 was at least this bad. Actually its biggest problem was it refused to even ADMIT it was charging (even though it was) off of most devices. In fact everything I just listed it would claim wasn't even connected to it. A few hours later it was full, but it refused to recognize it. 4.2 fixed that, but it was still slow off of most devices. This at least admits it's being charged, but barely is.
And no, I haven't tried the stock charger yet. I guess I will, but it's not a high priority since it doesn't cover my issues.
Click to expand...
Click to collapse
Oh that's bad , I didn't know that!
Would just be the "reference test" since the stock charger should meet all the specs (and works fine here with every cable).
@cutterjohn: "Currentwidget" can display those values.
Enddo said:
i am having much much much better results with my N5. i have no reason to charge it through a USB port on the computer(are you using an USB 1.0 port or something?), but charging it with the charger that it came with, i get a full charge in about 2 hours.
my N5 will charge a tiny bit over 1% per minute(while on or off), until it gets to 80% and then it charges at about .5% per minute or something
if you're getting the same charge times on the wall charger then i think you might have a defective charger/device. testing this will also be a good way to find out if it's just a slow usb port too
Click to expand...
Click to collapse
The problem he's having isn't about a computer USB port at all, the problem is that the N5 thinks it's plugged in a computer and limits the current to 500mA to meet the USB specs (and don't blow up some usb ports without a fuse somewhere) but in reality it's plugged in a wall charger.
His phone should be fine since it's working as expected on some carger/cable combos.
Btw. the N5 isn't pulling more current than the N4(both 1,2A), so it should charge almost exactly as fast/slow as the N4. It should even be a bit slower since the battery is slightly bigger I think.

cutterjohn said:
OOC what sort of dmm/ammeter are you using to measure this?
Click to expand...
Click to collapse
I'm simply using the app Battery Monitor Widget. Really handy tool that solved some problems for me on the 4 with some weird charging situations. While I'm sure it's not insanely precise, it reflects my draining or charging rate well enough to show me what's going on.
Enddo said:
before i optimized my N4 i was getting about 4-5 hours of screen time, but it took at least 3 full hours to charge. that charge time to usage time ratio was killing me.
i am having much much much better results with my N5. i have no reason to charge it through a USB port on the computer(are you using an USB 1.0 port or something?), but charging it with the charger that it came with, i get a full charge in about 2 hours.
my N5 will charge a tiny bit over 1% per minute(while on or off), until it gets to 80% and then it charges at about .5% per minute or something
if you're getting the same charge times on the wall charger then i think you might have a defective charger/device. testing this will also be a good way to find out if it's just a slow usb port too
Click to expand...
Click to collapse
I think you're missing the fact that I'm comparing it directly to how well these same devices charged the 4. So they're clearly not defective so much as the 5's requirements have changed completely. And USB 1.0 (I think you mean 1.1) isn't relevant here, as I'm not charging off a computer, I'm charging off a wall and/or car adapter. But sounds like we had very different experiences with the 4. I could charge my 4 off my Monoprice pocket battery in crazy fast time, and my phone was always full by the time I reached my destination in the car, even with Waze running (once I figured out I couldn't use the long cable I was using initially).
maisi said:
Oh that's bad , I didn't know that!
Would just be the "reference test" since the stock charger should meet all the specs (and works fine here with every cable).
Click to expand...
Click to collapse
Absolutely. A control of sorts. Might as well.
Btw. the N5 isn't pulling more current than the N4(both 1,2A), so it should charge almost exactly as fast/slow as the N4. It should even be a bit slower since the battery is slightly bigger I think.
Click to expand...
Click to collapse
Exactly. That's why I was surprised. There's no way it SHOULD be this much slower. Yes, I can see percentage adjusting slightly for the larger battery, but that's why I'm going by mA input instead, and my 4 was getting WAY better in the car. Although I don't think it ever got the 1.2 I'm getting with the Monoprice wall combo, so THAT's impressive. Now if I can just get that in my car without the RF interference and I can call it a day.

maisi said:
@cutterjohn: "Currentwidget" can display those values.
Click to expand...
Click to collapse
Well then your either have defective hardware or currentwidget just doesn't work. As I inferred hard to tell w/o proper tools.
[EDIT]
Oops, multiple responses and replied to incorrect one, but really if your recharge rate is that much lower v. n4 I'd say that your chargers or n5 are defective. It's going to take longer to charge the n5 obviously, and I have no idea what the max draw either can achieve as I've been strictly using inductive charging w/max 1A supply(as per Qi spec)... n5 takes longer to charge than n4, but thats to be expected by batt cap(and wear(decreased cap) of n4 batt)...
Subjectively, the n5 takes longer to charge, but not that much longer that I've noticed, again batt cap, etc. so...
Both USB/AC adapter chargers I know supply a max of 1.2A...
...(from last so) ask for a replacement n5, after they've been replacing them for a single dead pixel...
[/EDIT]

My n5 charging real fast fatter t than my n4!
Sent from my Nexus 5 using Tapatalk

cutterjohn said:
Well then your either have defective hardware or currentwidget just doesn't work. As I inferred hard to tell w/o proper tools.
Click to expand...
Click to collapse
Neither I think, we don't need any mA values to see that something is wrong, android is telling us that it thinks that it's connected to a usb port while it isn't.
Of course if we would want to measure exact mA values we would need a different equipment, for cable comparisions in order to see a tendency, the values from the charge IC should be good enough.(IMO)
[EDIT]
Oops, multiple responses and replied to incorrect one, but really if your recharge rate is that much lower v. n4 I'd say that your chargers or n5 are defective. It's going to take longer to charge the n5 obviously, and I have no idea what the max draw either can achieve as I've been strictly using inductive charging w/max 1A supply(as per Qi spec)... n5 takes longer to charge than n4, but thats to be expected by batt cap(and wear(decreased cap) of n4 batt)...
Subjectively, the n5 takes longer to charge, but not that much longer that I've noticed, again batt cap, etc. so...
Both USB/AC adapter chargers I know supply a max of 1.2A...
...(from last so) ask for a replacement n5, after they've been replacing them for a single dead pixel...
[/EDIT]
Click to expand...
Click to collapse
Just saw your edit ^^
Well it looks like the N5 has a very low tolerance for AC/USB detection, I'm sure that neither his chargers or Phone are defective, the chargers just aren't 100%in the spec which is obviously enough. I'm sure that the stock charger would be fine.

cutterjohn said:
Well then your either have defective hardware or currentwidget just doesn't work. As I inferred hard to tell w/o proper tools.
[EDIT]
Oops, multiple responses and replied to incorrect one, but really if your recharge rate is that much lower v. n4 I'd say that your chargers or n5 are defective. It's going to take longer to charge the n5 obviously, and I have no idea what the max draw either can achieve as I've been strictly using inductive charging w/max 1A supply(as per Qi spec)... n5 takes longer to charge than n4, but thats to be expected by batt cap(and wear(decreased cap) of n4 batt)...
Click to expand...
Click to collapse
Clearly neither is the case from my testing. The N5 charges beautifully off of the right combination of chargers, and all of those chargers charged the N4 beautifully. Neither is defective, but the N5 apparently has a different tolerance requirement than the N4.
Really, as opposed to anything being defective, it sounds more like a design flaw in the N5. It's WAY too picky about its power sources.

Mine charged REALLY slow the first day and that night. It also drained really quickly during that same time. I am now on my third day and it has long battery life plus it charged about 20% in 30 minutes on a car charger. Seems quicker than my S3.

[Q] Wireless Charging + Daydream Bizarre Performance

This is my first experience with wireless charging so I'm probably missing the obvious here so please, anybody, point that out.
I'm newly using a wireless charger with my N5 & performance just doesn't make any sense to me. It's the Korean/Chinese knock-off of the N4 Orb which others on XDA have used successfully. On basic charging it does work but I can't make any sense of these numbers:
Charging I get roughly 10% per hour -- not great, but okay for bedside/overnight.
Charging with daydream on (Dashclock) on I get a loss of roughly 10% per hour! Yes, the phone keeps indicating it is charging in spite of this heavy drain.
But sometimes daydream just turns off & it returns to charging -- this seems to happen if I start off with the phone (mostly) charged. For the most part though, if I leave the phone on the charger overnight with daydream enabled I'll wake to a nearly empty battery.
As I said, these numbers make no sense to me at all. Part of the problem may be the power source for the orb - it's only 1A but even if it's underpowered I can't see the drop from +10% to -10% /hour.
Second part of my query -- does anyone know if it would be effective (and safe!) to feed 1.2A to the orb & maybe get faster charge. Or maybe that would be enough to keep up with the Daydream drain?
FWIW the the USB charger (1.2A) is very fast, I get better than 1% per minute -- unaffected by Daydream.

im using this and mine gets full charge within 1 and half hours
Sent from my Nexus 5 using xda app-developers app

10% per hour? Something's wrong. A wireless charger shouldn't take much longer than wired.
It's possible your adapter is a dud. Try using the 1.2a adapter, it'll be fine. If it still isn't faster, you might have a bad charger.
Also, if it came with a USB cable, don't use it. The wires are too small to carry a reasonable amount of current.

NotFromMountainView said:
This is my first experience with wireless charging so I'm probably missing the obvious here so please, anybody, point that out.
I'm newly using a wireless charger with my N5 & performance just doesn't make any sense to me. It's the Korean/Chinese knock-off of the N4 Orb which others on XDA have used successfully. On basic charging it does work but I can't make any sense of these numbers:
Charging I get roughly 10% per hour -- not great, but okay for bedside/overnight.
Charging with daydream on (Dashclock) on I get a loss of roughly 10% per hour! Yes, the phone keeps indicating it is charging in spite of this heavy drain.
But sometimes daydream just turns off & it returns to charging -- this seems to happen if I start off with the phone (mostly) charged. For the most part though, if I leave the phone on the charger overnight with daydream enabled I'll wake to a nearly empty battery.
As I said, these numbers make no sense to me at all. Part of the problem may be the power source for the orb - it's only 1A but even if it's underpowered I can't see the drop from +10% to -10% /hour.
Second part of my query -- does anyone know if it would be effective (and safe!) to feed 1.2A to the orb & maybe get faster charge. Or maybe that would be enough to keep up with the Daydream drain?
FWIW the the USB charger (1.2A) is very fast, I get better than 1% per minute -- unaffected by Daydream.
Click to expand...
Click to collapse
So I'm using DashClock also and when it doesn't crash, my phone will charge just fine. Seems like about 3 hours total with daydream on, and about 2 hours with it off just regular charging. Here's my charger: http://www.amazon.com/gp/product/B00DOW1RD0/ref=wms_ohs_product?ie=UTF8&psc=1. Seems like you have a defective charger but it is a really weird situation.

Thanks guys, the jump to 1.2A made a world of difference! It still seems strange, but I guess there's a minimum threshold for the phone to properly charge. (I am really guessing!) Plugging the OEM charger into my qi orb I finally get a positive charge with daydream -- not fast, but good enough to wake with a charged phone! Without daydream I just got about 36% in the past hour.
A quick scan of eBay and the only 1.2A USB supplies I can find are refurbished LG & cost as much as the full qi orb! (from US with crazy shipping costs on these - I'm in Canada) But there are lots of 1.5A blocks, cheap (and free shipping from China). So... do you think it would be safe to try the 1.5A? According to Play the Google qi comes with a 1.8A supply but I have no idea how much the pad modulates the power or if that is all in the phone itself. It would be nice to have fast wireless charging, but with the dramatic jump with just the .2A increase I may be looking at something too powerful.
My concerns are (in order) 1. Don't want to fry the phone!
2. Don't want to burn down my apartment!
3. Would rather not trash the orb. The orb was inexpensive so I'm willing to gamble on point # 3.
Advice / assurances / suggestions? Please.
Mr. Sprinkles said:
Also, if it came with a USB cable, don't use it. The wires are too small to carry a reasonable amount of current.
Click to expand...
Click to collapse
I assume you mean USB out from PC since OEM charger is USB and orb power supply is USB as well. Point taken on PC charging though.

NotFromMountainView said:
Thanks guys, the jump to 1.2A made a world of difference! It still seems strange, but I guess there's a minimum threshold for the phone to properly charge. (I am really guessing!) Plugging the OEM charger into my qi orb I finally get a positive charge with daydream -- not fast, but good enough to wake with a charged phone! Without daydream I just got about 36% in the past hour.
A quick scan of eBay and the only 1.2A USB supplies I can find are refurbished LG & cost as much as the full qi orb! (from US with crazy shipping costs on these - I'm in Canada) But there are lots of 1.5A blocks, cheap (and free shipping from China). So... do you think it would be safe to try the 1.5A? According to Play the Google qi comes with a 1.8A supply but I have no idea how much the pad modulates the power or if that is all in the phone itself. It would be nice to have fast wireless charging, but with the dramatic jump with just the .2A increase I may be looking at something too powerful.
My concerns are (in order) 1. Don't want to fry the phone!
2. Don't want to burn down my apartment!
3. Would rather not trash the orb. The orb was inexpensive so I'm willing to gamble on point # 3.
Advice / assurances / suggestions? Please.
I assume you mean USB out from PC since OEM charger is USB and orb power supply is USB as well. Point taken on PC charging though.
Click to expand...
Click to collapse
The official orb charger comes with a 1.8a brick. You should be fine.
Sent from my Nexus 10 using Tapatalk 4

NotFromMountainView said:
Thanks guys, the jump to 1.2A made a world of difference! [...] you mean USB out from PC since OEM charger is USB and orb power supply is USB as well. Point taken on PC charging though.
Click to expand...
Click to collapse
I mean if your orb uses a USB cable and came with one, don't use the cable it came with. They're often very cheap and add a lot of resistance which will increase charge time.
It wasn't the step up to 1.2A that made a world of difference, it's using a quality adapter that made the difference. Your 1A adapter must have been faulty or grossly overrated. Sounds like it was putting out less than 500mA.
As for a higher amperage power supply somehow damaging things? Not possible. The circuitry in the wireless charger is only going to use what it needs, you could hook it up to a 50A power supply and it'll still draw around 1A. The N5 is also input current limited to 1.2A, so using a crazy high amperage adapter won't have much benefit anyway.
Still, not a bad idea to get a 1.5A - 2A adapter to compensate for whatever current the wireless charger itself uses. This is probably why the official one includes a 1.8A adapter.

Mr. Sprinkles said:
10% per hour? Something's wrong. A wireless charger shouldn't take much longer than wired.
It's possible your adapter is a dud. Try using the 1.2a adapter, it'll be fine. If it still isn't faster, you might have a bad charger.
Also, if it came with a USB cable, don't use it. The wires are too small to carry a reasonable amount of current.
Click to expand...
Click to collapse
Mr. Sprinkles said:
I mean if your orb uses a USB cable and came with one, don't use the cable it came with. They're often very cheap and add a lot of resistance which will increase charge time.
It wasn't the step up to 1.2A that made a world of difference, it's using a quality adapter that made the difference. Your 1A adapter must have been faulty or grossly overrated. Sounds like it was putting out less than 500mA.
As for a higher amperage power supply somehow damaging things? Not possible. The circuitry in the wireless charger is only going to use what it needs, you could hook it up to a 50A power supply and it'll still draw around 1A. The N5 is also input current limited to 1.2A, so using a crazy high amperage adapter won't have much benefit anyway.
Still, not a bad idea to get a 1.5A - 2A adapter to compensate for whatever current the wireless charger itself uses. This is probably why the official one includes a 1.8A adapter.
Click to expand...
Click to collapse
El Daddy & Mr. Sprinkles thanks, that's just the type of reassurance I needed!

just use the 2,1A amazon kindle charger with your orb... its cheap, safe and wont fry your phone
Gesendet von meinem Nexus 5 mit Tapatalk

Mr. Sprinkles said:
I mean if your orb uses a USB cable and came with one, don't use the cable it came with. They're often very cheap and add a lot of resistance which will increase charge time.
It wasn't the step up to 1.2A that made a world of difference, it's using a quality adapter that made the difference. Your 1A adapter must have been faulty or grossly overrated. Sounds like it was putting out less than 500mA.
As for a higher amperage power supply somehow damaging things? Not possible. The circuitry in the wireless charger is only going to use what it needs, you could hook it up to a 50A power supply and it'll still draw around 1A. The N5 is also input current limited to 1.2A, so using a crazy high amperage adapter won't have much benefit anyway.
Still, not a bad idea to get a 1.5A - 2A adapter to compensate for whatever current the wireless charger itself uses. This is probably why the official one includes a 1.8A adapter.
Click to expand...
Click to collapse
So from what I heard wireless charging, like a pogo plug can charge at a higher rate than the micro USB port in some devices (I've heard pogo plug can go up to 2.5A where the micro USB in that device is limited to 1.8A). So I'm wondering as these qi chargers get better, will this also be true. Mine is a 1A but seems like it charges around .8A so it's maxed out. I guess this also raises the question as to how fast is good for a battery also.
Sent from my Nexus 5 using Tapatalk

Slow charging... Anyone else?

I've seen a few things online with no charging problems. Mine will charge but super slow. Overnight it will only charge to about 73%. Tried battery calibration and still nothing. Any tricks or fixes I don't know about?

Are you using the original charger and cable? You need at least a 2amp charger and the original cable to charge properly.
Transmitted via Bacon

timmaaa said:
Are you using the original charger and cable? You need at least a 2amp charger and the original cable to charge properly.
Transmitted via Bacon
Click to expand...
Click to collapse
He is right. Older chargers are not 2 amp, and so they will charge, but very slowly. You don't have to necessarily use the original cable, or the stock charger. Really any cable will get you fast charging as long as the block that plugs into the wall is a 2 amp. Chargers that will charge tablets usually work. My wife has an LG G3 and the charger for that works as well.

bradleyw801 said:
He is right. Older chargers are not 2 amp, and so they will charge, but very slowly. You don't have to necessarily use the original cable, or the stock charger. Really any cable will get you fast charging as long as the block that plugs into the wall is a 2 amp. Chargers that will charge tablets usually work. My wife has an LG G3 and the charger for that works as well.
Click to expand...
Click to collapse
Totally untrue and very bad, maybe even dangerous, advice...
Use a sub-standard cable with a 2 amp charger and you run a very serious risk of overheating, damaging the phone or charger, and even the risk of an electrical fire.
Always use good quality cables and chargers, and read other people's recommendations as to what are good. Buying a cheap set just to save a few quid could cost you your phone, or much more.

SimonTS said:
Totally untrue and very bad, maybe even dangerous, advice...
Use a sub-standard cable with a 2 amp charger and you run a very serious risk of overheating, damaging the phone or charger, and even the risk of an electrical fire.
Always use good quality cables and chargers, and read other people's recommendations as to what are good. Buying a cheap set just to save a few quid could cost you your phone, or much more.
Click to expand...
Click to collapse
I agree if you buy a cable that ignores safety standards you could cause a fire, but that to me just has to do with being a cheap cable. Here is some information that supports what I am saying:
http://www.extremetech.com/computin...ks-or-how-to-avoid-blowing-up-your-smartphone
To quote that article "USB 1.0 and 2.0 specs, a standard downstream port is capable of delivering up to 500mA (0.5A); in USB 3.0, it moves up to 900mA (0.9A). The charging downstream and dedicated charging ports provide up to 1500mA (1.5A)"
Also, "You can plug any USB device into any USB cable and into any USB port, and nothing will blow up — and in fact, using a more powerful charger should speed up battery charging."
So perhaps I should explain to the person that asked the question, if your cable is more than a few years old, it may still charge slowly. You need it to be at least USB 3.0. But most cables sold in the last few years are USB 3.0.
Using a cheap quality cable, sure, that's always a bad idea no matter what. Using an older cable, the worst that could happen (assuming it's not in poor condition) is that it will only let .5amps through.

I charged mine last night for 7 hours and it only has 22% battery.
I originally bought a One Plus One in February 2015. It broke and I had to go through the extensive RMA process. Since they shipped the replacement phone to me, I have been noticing more and more problems. The latest being the charging. I cannot get it to charge correctly. Since the RMA process took a month (Feb 22 - March 22), I'm very reluctant to do it again. Considering selling this and going back to AT&T. Or at least some company that has phone support/any support.
I plugged it in 5 minutes ago at 7% battery and now its dead.

Jess650 said:
I charged mine last night for 7 hours and it only has 22% battery.
I originally bought a One Plus One in February 2015. It broke and I had to go through the extensive RMA process. Since they shipped the replacement phone to me, I have been noticing more and more problems. The latest being the charging. I cannot get it to charge correctly. Since the RMA process took a month (Feb 22 - March 22), I'm very reluctant to do it again. Considering selling this and going back to AT&T. Or at least some company that has phone support/any support.
I plugged it in 5 minutes ago at 7% battery and now its dead.
Click to expand...
Click to collapse
Are you using the original charger and cable?

Thanks for input guys. I do not have my original charger anymore. My wife's new kitten has made quick work if several chargers. I purchased one yesterday at local Verizon store. 2amp chargers are actually hard to find. So this is what I got. It charges fast again. Charged my phone from 5% to 71% in about 40 minutes. This model actually States 2.1 amp.

A great replacement is the original Blackberry Playbook charger with the non-removeable cable. Almost as fast as my original charger and a sensible price as well.

Install any ROM except the ones based on Omni.. (like the SlimROMs) and flash boeffla kernel. Keep the AC Charging Current up to 2200A. It says it may damage the USB Cable or charger but nothing ever happened to my Galaxy S3 (on the same kernel) or OPO. It charges extremely fast with the original USB cable and charger. Try it! Worked for all my friends!

Charging Pixel with micro->C adapter

Hello guys,
I have a 1~2 yr old 5V 1A charger that I would like to use to charge my Pixel (non XL) overnight. The included 3A charger heats up the phone a lot, and I really don't need the speed at night.
The thing is that this charger comes with a micro usb (charge only, no data) cable that I'd like to use. For this of course, I am using a TechMatte micro usb to Usb C adapter that I bought a few months ago.
Is there any problem with this? Will the adapter cause the phone to draw power differently, or to behave differently when it comes to stopping the charge once it reaches 100%?
Sorry if this is an absurd question, I just don't want anything bad to happen to my brand new Pixel.
Thank you in advance

I've been using my existing micro USB cables with a converter head from Anker without any issues for more than a month now!

I think as long as the adapter have the 56kΩ resistor you should be safe, but really I highly doubt there are any benefits to slow charging (even if fast charging is making the phone warmer).

badchip said:
I think as long as the adapter have the 56kΩ resistor you should be safe, but really I highly doubt there are any benefits to slow charging (even if fast charging is making the phone warmer).
Click to expand...
Click to collapse
I'm with you on this one generally, I personally don't hang on to a phone for too long before upgrading so longevity only needs to be 1-2 years. For someone looking to get the absolute most out of a device, I could see why heat would be a concern. More heat typically translates to more wear and tear of the innards. Even if it's by a negligible amount... lol
Also, Samsung might have people paranoid that their phones are going to blow up... just sayin :laugh: